upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
203 lines
6.3 KiB
203 lines
6.3 KiB
/*
|
|
* (C) Copyright 2007
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* Configuation settings for the SMN42 board from Siemens.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/*
|
|
* If we are developing, we might want to start u-boot from ram
|
|
* so we MUST NOT initialize critical regs like mem-timing ...
|
|
*/
|
|
#undef CONFIG_SKIP_LOWLEVEL_INIT
|
|
#undef CONFIG_SKIP_RELOCATE_UBOOT
|
|
|
|
/*
|
|
* High Level Configuration Options
|
|
* (easy to change)
|
|
*/
|
|
#define CONFIG_ARM7 1 /* This is a ARM7 CPU */
|
|
#define CONFIG_ARM_THUMB 1 /* this is an ARM720TDMI */
|
|
#define CONFIG_LPC2292
|
|
#undef CONFIG_ARM7_REVD /* disable ARM720 REV.D Workarounds */
|
|
|
|
#undef CONFIG_USE_IRQ /* don't need them anymore */
|
|
|
|
/*
|
|
* Size of malloc() pool
|
|
*/
|
|
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
|
|
#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
|
|
|
|
/*
|
|
* Hardware drivers
|
|
*/
|
|
|
|
/*
|
|
* select serial console configuration
|
|
*/
|
|
#define CONFIG_LPC2292_SERIAL
|
|
#define CONFIG_SERIAL1 1 /* we use Serial line 1 */
|
|
|
|
/* allow to overwrite serial and ethaddr */
|
|
#define CONFIG_ENV_OVERWRITE
|
|
|
|
#define CONFIG_BAUDRATE 115200
|
|
|
|
/*
|
|
* BOOTP options
|
|
*/
|
|
#define CONFIG_BOOTP_SUBNETMASK
|
|
#define CONFIG_BOOTP_GATEWAY
|
|
#define CONFIG_BOOTP_HOSTNAME
|
|
#define CONFIG_BOOTP_BOOTPATH
|
|
#define CONFIG_BOOTP_BOOTFILESIZE
|
|
|
|
|
|
/* enable I2C and select the hardware/software driver */
|
|
#undef CONFIG_HARD_I2C /* I2C with hardware support */
|
|
#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */
|
|
/* this would be 0xAE if E0, E1 and E2 were pulled high */
|
|
#define CONFIG_SYS_I2C_SLAVE 0xA0
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR (0xA0 >> 1)
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* 16 bit address */
|
|
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 /* 64 bytes per write */
|
|
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20
|
|
/* not used but required by devices.c */
|
|
#define CONFIG_SYS_I2C_SPEED 10000
|
|
|
|
#ifdef CONFIG_SOFT_I2C
|
|
/*
|
|
* Software (bit-bang) I2C driver configuration
|
|
*/
|
|
#define SCL 0x00000004 /* P0.2 */
|
|
#define SDA 0x00000008 /* P0.3 */
|
|
|
|
#define I2C_READ ((GET32(IO0PIN) & SDA) ? 1 : 0)
|
|
#define I2C_SDA(x) { if (x) PUT32(IO0SET, SDA); else PUT32(IO0CLR, SDA); }
|
|
#define I2C_SCL(x) { if (x) PUT32(IO0SET, SCL); else PUT32(IO0CLR, SCL); }
|
|
#define I2C_DELAY { udelay(100); }
|
|
#define I2C_ACTIVE { unsigned int i2ctmp; \
|
|
i2ctmp = GET32(IO0DIR); \
|
|
i2ctmp |= SDA; \
|
|
PUT32(IO0DIR, i2ctmp); }
|
|
#define I2C_TRISTATE { unsigned int i2ctmp; \
|
|
i2ctmp = GET32(IO0DIR); \
|
|
i2ctmp &= ~SDA; \
|
|
PUT32(IO0DIR, i2ctmp); }
|
|
#endif /* CONFIG_SOFT_I2C */
|
|
|
|
|
|
/*
|
|
* Command line configuration.
|
|
*/
|
|
#include <config_cmd_default.h>
|
|
#define CONFIG_CMD_DHCP
|
|
#define CONFIG_CMD_FAT
|
|
#define CONFIG_CMD_MMC
|
|
#define CONFIG_CMD_NET
|
|
#define CONFIG_CMD_EEPROM
|
|
#define CONFIG_CMD_PING
|
|
|
|
|
|
#define CONFIG_DOS_PARTITION
|
|
|
|
#define CONFIG_BOOTDELAY 5
|
|
|
|
/*
|
|
* Miscellaneous configurable options
|
|
*/
|
|
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
|
#define CONFIG_SYS_PROMPT "SMN42 # " /* Monitor Command Prompt */
|
|
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
|
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
|
|
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
|
|
|
|
#define CONFIG_SYS_MEMTEST_START 0x81800000 /* memtest works on */
|
|
#define CONFIG_SYS_MEMTEST_END 0x83000000 /* 24 MB in SRAM */
|
|
|
|
#define CONFIG_SYS_LOAD_ADDR 0x81000000 /* default load address */
|
|
/* for uClinux img is here*/
|
|
|
|
#define CONFIG_SYS_SYS_CLK_FREQ 58982400 /* Hz */
|
|
#define CONFIG_SYS_HZ 2048 /* decrementer freq in Hz */
|
|
|
|
/* valid baudrates */
|
|
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Stack sizes
|
|
*
|
|
* The stack sizes are set up in start.S using the settings below
|
|
*/
|
|
#define CONFIG_STACKSIZE (128*1024) /* regular stack */
|
|
#ifdef CONFIG_USE_IRQ
|
|
#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
|
|
#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
|
|
#endif
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Physical Memory Map
|
|
*/
|
|
#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of SRAM */
|
|
#define PHYS_SDRAM_1 0x81000000 /* SRAM Bank #1 */
|
|
#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB SRAM */
|
|
|
|
/* This is the external flash */
|
|
#define PHYS_FLASH_1 0x80000000 /* Flash Bank #1 */
|
|
#define PHYS_FLASH_SIZE 0x01000000 /* 16 MB */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* FLASH and environment organization
|
|
*/
|
|
|
|
/*
|
|
* The first entry in CONFIG_SYS_FLASH_BANKS_LIST is a dummy, but it must be present.
|
|
*/
|
|
#define CONFIG_SYS_FLASH_BANKS_LIST { 0, PHYS_FLASH_1 }
|
|
#define CONFIG_SYS_FLASH_ADDR0 0x555
|
|
#define CONFIG_SYS_FLASH_ADDR1 0x2AA
|
|
#define CONFIG_SYS_FLASH_ERASE_TOUT 16384 /* Timeout for Flash Erase (in ms) */
|
|
#define CONFIG_SYS_FLASH_WRITE_TOUT 5 /* Timeout for Flash Write (in ms) */
|
|
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
|
|
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
|
|
|
|
#define CONFIG_ENV_IS_IN_FLASH 1
|
|
/* The Environment Sector is in the CPU-internal flash */
|
|
#define CONFIG_SYS_FLASH_BASE 0
|
|
#define CONFIG_ENV_OFFSET 0x3C000
|
|
#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
|
|
#define CONFIG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
|
|
|
|
#define CONFIG_CMDLINE_TAG
|
|
#define CONFIG_SETUP_MEMORY_TAGS
|
|
#define CONFIG_INITRD_TAG
|
|
#define CONFIG_MMC 1
|
|
/* we use this ethernet chip */
|
|
#define CONFIG_ENC28J60_LPC2292
|
|
|
|
#endif /* __CONFIG_H */
|
|
|