upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/arch/nios2/dts/3c120_devboard.dts

201 lines
4.7 KiB

/*
* Copyright (C) 2013 Altera Corporation
*
* This file is generated by sopc2dts.
*
* SPDX-License-Identifier: GPL-2.0+
*/
/dts-v1/;
/ {
model = "altr,qsys_ghrd_3c120";
compatible = "altr,qsys_ghrd_3c120";
#address-cells = <1>;
#size-cells = <1>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu: cpu@0x0 {
device_type = "cpu";
compatible = "altr,nios2-1.0";
reg = <0x00000000>;
interrupt-controller;
#interrupt-cells = <1>;
clock-frequency = <125000000>;
dcache-line-size = <32>;
icache-line-size = <32>;
dcache-size = <32768>;
icache-size = <32768>;
altr,implementation = "fast";
altr,pid-num-bits = <8>;
altr,tlb-num-ways = <16>;
altr,tlb-num-entries = <128>;
altr,tlb-ptr-sz = <7>;
altr,has-div = <1>;
altr,has-mul = <1>;
altr,reset-addr = <0xc2800000>;
altr,fast-tlb-miss-addr = <0xc7fff400>;
altr,exception-addr = <0xd0000020>;
altr,has-initda = <1>;
altr,has-mmu = <1>;
};
};
memory@0 {
device_type = "memory";
reg = <0x10000000 0x08000000>,
<0x07fff400 0x00000400>;
};
sopc@0 {
device_type = "soc";
ranges;
#address-cells = <1>;
#size-cells = <1>;
compatible = "altr,avalon", "simple-bus";
bus-frequency = <125000000>;
pb_cpu_to_io: bridge@0x8000000 {
compatible = "simple-bus";
reg = <0x08000000 0x00800000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00002000 0x08002000 0x00002000>,
<0x00004000 0x08004000 0x00000400>,
<0x00004400 0x08004400 0x00000040>,
<0x00004800 0x08004800 0x00000040>,
<0x00004c80 0x08004c80 0x00000020>,
<0x00004cc0 0x08004cc0 0x00000010>,
<0x00004ce0 0x08004ce0 0x00000010>,
<0x00004d00 0x08004d00 0x00000010>,
<0x00004d40 0x08004d40 0x00000008>,
<0x00004d50 0x08004d50 0x00000008>,
<0x00008000 0x08008000 0x00000020>,
<0x00400000 0x08400000 0x00000020>;
timer_1ms: timer@0x400000 {
compatible = "altr,timer-1.0";
reg = <0x00400000 0x00000020>;
interrupt-parent = <&cpu>;
interrupts = <11>;
clock-frequency = <125000000>;
};
timer_0: timer@0x8000 {
compatible = "altr,timer-1.0";
reg = < 0x00008000 0x00000020 >;
interrupt-parent = < &cpu >;
interrupts = < 5 >;
clock-frequency = < 125000000 >;
};
sysid: sysid@0x4d40 {
compatible = "altr,sysid-1.0";
reg = <0x00004d40 0x00000008>;
};
jtag_uart: serial@0x4d50 {
compatible = "altr,juart-1.0";
reg = <0x00004d50 0x00000008>;
interrupt-parent = <&cpu>;
interrupts = <1>;
};
tse_mac: ethernet@0x4000 {
compatible = "altr,tse-1.0";
reg = <0x00004000 0x00000400>,
<0x00004400 0x00000040>,
<0x00004800 0x00000040>,
<0x00002000 0x00002000>;
reg-names = "control_port", "rx_csr", "tx_csr", "s1";
interrupt-parent = <&cpu>;
interrupts = <2 3>;
interrupt-names = "rx_irq", "tx_irq";
rx-fifo-depth = <8192>;
tx-fifo-depth = <8192>;
max-frame-size = <1518>;
local-mac-address = [ 00 00 00 00 00 00 ];
phy-mode = "rgmii-id";
phy-handle = <&phy0>;
tse_mac_mdio: mdio {
compatible = "altr,tse-mdio";
#address-cells = <1>;
#size-cells = <0>;
phy0: ethernet-phy@18 {
reg = <18>;
device_type = "ethernet-phy";
};
};
};
uart: serial@0x4c80 {
compatible = "altr,uart-1.0";
reg = <0x00004c80 0x00000020>;
interrupt-parent = <&cpu>;
interrupts = <10>;
current-speed = <115200>;
clock-frequency = <62500000>;
};
user_led_pio_8out: gpio@0x4cc0 {
compatible = "altr,pio-1.0";
reg = <0x00004cc0 0x00000010>;
resetvalue = <255>;
altr,gpio-bank-width = <8>;
#gpio-cells = <2>;
gpio-controller;
gpio-bank-name = "led";
};
user_dipsw_pio_8in: gpio@0x4ce0 {
compatible = "altr,pio-1.0";
reg = <0x00004ce0 0x00000010>;
interrupt-parent = <&cpu>;
interrupts = <8>;
edge_type = <2>;
level_trigger = <0>;
resetvalue = <0>;
altr,gpio-bank-width = <8>;
#gpio-cells = <2>;
gpio-controller;
gpio-bank-name = "dipsw";
};
user_pb_pio_4in: gpio@0x4d00 {
compatible = "altr,pio-1.0";
reg = <0x00004d00 0x00000010>;
interrupt-parent = <&cpu>;
interrupts = <9>;
edge_type = <2>;
level_trigger = <0>;
resetvalue = <0>;
altr,gpio-bank-width = <4>;
#gpio-cells = <2>;
gpio-controller;
gpio-bank-name = "pb";
};
};
cfi_flash_64m: flash@0x0 {
compatible = "cfi-flash";
reg = <0x00000000 0x04000000>;
bank-width = <2>;
device-width = <1>;
#address-cells = <1>;
#size-cells = <1>;
partition@800000 {
reg = <0x00800000 0x01e00000>;
label = "JFFS2 Filesystem";
};
};
};
chosen {
bootargs = "debug console=ttyJ0,115200";
stdout-path = &jtag_uart;
};
};