upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/drivers/mtd/nand/raw/kirkwood_nand.c

91 lines
1.9 KiB

// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2009
* Marvell Semiconductor <www.marvell.com>
* Written-by: Prafulla Wadaskar <prafulla@marvell.com>
*/
#include <common.h>
#include <asm/io.h>
#include <asm/arch/soc.h>
#include <asm/arch/mpp.h>
#include <nand.h>
/* NAND Flash Soc registers */
struct kwnandf_registers {
u32 rd_params; /* 0x10418 */
u32 wr_param; /* 0x1041c */
u8 pad[0x10470 - 0x1041c - 4];
u32 ctrl; /* 0x10470 */
};
static struct kwnandf_registers *nf_reg =
(struct kwnandf_registers *)KW_NANDF_BASE;
static u32 nand_mpp_backup[9] = { 0 };
/*
* hardware specific access to control-lines/bits
*/
#define NAND_ACTCEBOOT_BIT 0x02
static void kw_nand_hwcontrol(struct mtd_info *mtd, int cmd,
unsigned int ctrl)
{
struct nand_chip *nc = mtd_to_nand(mtd);
u32 offs;
if (cmd == NAND_CMD_NONE)
return;
if (ctrl & NAND_CLE)
offs = (1 << 0); /* Commands with A[1:0] == 01 */
else if (ctrl & NAND_ALE)
offs = (1 << 1); /* Addresses with A[1:0] == 10 */
else
return;
writeb(cmd, nc->IO_ADDR_W + offs);
}
void kw_nand_select_chip(struct mtd_info *mtd, int chip)
{
u32 data;
static const u32 nand_config[] = {
MPP0_NF_IO2,
MPP1_NF_IO3,
MPP2_NF_IO4,
MPP3_NF_IO5,
MPP4_NF_IO6,
MPP5_NF_IO7,
MPP18_NF_IO0,
MPP19_NF_IO1,
0
};
if (chip >= 0)
kirkwood_mpp_conf(nand_config, nand_mpp_backup);
else
kirkwood_mpp_conf(nand_mpp_backup, NULL);
data = readl(&nf_reg->ctrl);
data |= NAND_ACTCEBOOT_BIT;
writel(data, &nf_reg->ctrl);
}
int board_nand_init(struct nand_chip *nand)
{
nand->options = NAND_COPYBACK | NAND_CACHEPRG | NAND_NO_PADDING;
#if defined(CONFIG_SYS_NAND_NO_SUBPAGE_WRITE)
nand->options |= NAND_NO_SUBPAGE_WRITE;
#endif
#if defined(CONFIG_NAND_ECC_BCH)
nand->ecc.mode = NAND_ECC_SOFT_BCH;
#else
nand->ecc.mode = NAND_ECC_SOFT;
#endif
nand->cmd_ctrl = kw_nand_hwcontrol;
nand->chip_delay = 40;
nand->select_chip = kw_nand_select_chip;
return 0;
}