upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
667 lines
16 KiB
667 lines
16 KiB
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2007-2011
|
|
* Allwinner Technology Co., Ltd. <www.allwinnertech.com>
|
|
* Aaron <leafy.myeh@allwinnertech.com>
|
|
*
|
|
* MMC driver for allwinner sunxi platform.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <errno.h>
|
|
#include <malloc.h>
|
|
#include <mmc.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/cpu.h>
|
|
#include <asm/arch/gpio.h>
|
|
#include <asm/arch/mmc.h>
|
|
#include <asm-generic/gpio.h>
|
|
|
|
struct sunxi_mmc_plat {
|
|
struct mmc_config cfg;
|
|
struct mmc mmc;
|
|
};
|
|
|
|
struct sunxi_mmc_priv {
|
|
unsigned mmc_no;
|
|
uint32_t *mclkreg;
|
|
unsigned fatal_err;
|
|
struct gpio_desc cd_gpio; /* Change Detect GPIO */
|
|
int cd_inverted; /* Inverted Card Detect */
|
|
struct sunxi_mmc *reg;
|
|
struct mmc_config cfg;
|
|
};
|
|
|
|
#if !CONFIG_IS_ENABLED(DM_MMC)
|
|
/* support 4 mmc hosts */
|
|
struct sunxi_mmc_priv mmc_host[4];
|
|
|
|
static int sunxi_mmc_getcd_gpio(int sdc_no)
|
|
{
|
|
switch (sdc_no) {
|
|
case 0: return sunxi_name_to_gpio(CONFIG_MMC0_CD_PIN);
|
|
case 1: return sunxi_name_to_gpio(CONFIG_MMC1_CD_PIN);
|
|
case 2: return sunxi_name_to_gpio(CONFIG_MMC2_CD_PIN);
|
|
case 3: return sunxi_name_to_gpio(CONFIG_MMC3_CD_PIN);
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int mmc_resource_init(int sdc_no)
|
|
{
|
|
struct sunxi_mmc_priv *priv = &mmc_host[sdc_no];
|
|
struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
|
|
int cd_pin, ret = 0;
|
|
|
|
debug("init mmc %d resource\n", sdc_no);
|
|
|
|
switch (sdc_no) {
|
|
case 0:
|
|
priv->reg = (struct sunxi_mmc *)SUNXI_MMC0_BASE;
|
|
priv->mclkreg = &ccm->sd0_clk_cfg;
|
|
break;
|
|
case 1:
|
|
priv->reg = (struct sunxi_mmc *)SUNXI_MMC1_BASE;
|
|
priv->mclkreg = &ccm->sd1_clk_cfg;
|
|
break;
|
|
case 2:
|
|
priv->reg = (struct sunxi_mmc *)SUNXI_MMC2_BASE;
|
|
priv->mclkreg = &ccm->sd2_clk_cfg;
|
|
break;
|
|
#ifdef SUNXI_MMC3_BASE
|
|
case 3:
|
|
priv->reg = (struct sunxi_mmc *)SUNXI_MMC3_BASE;
|
|
priv->mclkreg = &ccm->sd3_clk_cfg;
|
|
break;
|
|
#endif
|
|
default:
|
|
printf("Wrong mmc number %d\n", sdc_no);
|
|
return -1;
|
|
}
|
|
priv->mmc_no = sdc_no;
|
|
|
|
cd_pin = sunxi_mmc_getcd_gpio(sdc_no);
|
|
if (cd_pin >= 0) {
|
|
ret = gpio_request(cd_pin, "mmc_cd");
|
|
if (!ret) {
|
|
sunxi_gpio_set_pull(cd_pin, SUNXI_GPIO_PULL_UP);
|
|
ret = gpio_direction_input(cd_pin);
|
|
}
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
static int mmc_set_mod_clk(struct sunxi_mmc_priv *priv, unsigned int hz)
|
|
{
|
|
unsigned int pll, pll_hz, div, n, oclk_dly, sclk_dly;
|
|
bool new_mode = false;
|
|
u32 val = 0;
|
|
|
|
if (IS_ENABLED(CONFIG_MMC_SUNXI_HAS_NEW_MODE) && (priv->mmc_no == 2))
|
|
new_mode = true;
|
|
|
|
/*
|
|
* The MMC clock has an extra /2 post-divider when operating in the new
|
|
* mode.
|
|
*/
|
|
if (new_mode)
|
|
hz = hz * 2;
|
|
|
|
if (hz <= 24000000) {
|
|
pll = CCM_MMC_CTRL_OSCM24;
|
|
pll_hz = 24000000;
|
|
} else {
|
|
#ifdef CONFIG_MACH_SUN9I
|
|
pll = CCM_MMC_CTRL_PLL_PERIPH0;
|
|
pll_hz = clock_get_pll4_periph0();
|
|
#elif defined(CONFIG_MACH_SUN50I_H6)
|
|
pll = CCM_MMC_CTRL_PLL6X2;
|
|
pll_hz = clock_get_pll6() * 2;
|
|
#else
|
|
pll = CCM_MMC_CTRL_PLL6;
|
|
pll_hz = clock_get_pll6();
|
|
#endif
|
|
}
|
|
|
|
div = pll_hz / hz;
|
|
if (pll_hz % hz)
|
|
div++;
|
|
|
|
n = 0;
|
|
while (div > 16) {
|
|
n++;
|
|
div = (div + 1) / 2;
|
|
}
|
|
|
|
if (n > 3) {
|
|
printf("mmc %u error cannot set clock to %u\n", priv->mmc_no,
|
|
hz);
|
|
return -1;
|
|
}
|
|
|
|
/* determine delays */
|
|
if (hz <= 400000) {
|
|
oclk_dly = 0;
|
|
sclk_dly = 0;
|
|
} else if (hz <= 25000000) {
|
|
oclk_dly = 0;
|
|
sclk_dly = 5;
|
|
#ifdef CONFIG_MACH_SUN9I
|
|
} else if (hz <= 52000000) {
|
|
oclk_dly = 5;
|
|
sclk_dly = 4;
|
|
} else {
|
|
/* hz > 52000000 */
|
|
oclk_dly = 2;
|
|
sclk_dly = 4;
|
|
#else
|
|
} else if (hz <= 52000000) {
|
|
oclk_dly = 3;
|
|
sclk_dly = 4;
|
|
} else {
|
|
/* hz > 52000000 */
|
|
oclk_dly = 1;
|
|
sclk_dly = 4;
|
|
#endif
|
|
}
|
|
|
|
if (new_mode) {
|
|
#ifdef CONFIG_MMC_SUNXI_HAS_NEW_MODE
|
|
val = CCM_MMC_CTRL_MODE_SEL_NEW;
|
|
setbits_le32(&priv->reg->ntsr, SUNXI_MMC_NTSR_MODE_SEL_NEW);
|
|
#endif
|
|
} else {
|
|
val = CCM_MMC_CTRL_OCLK_DLY(oclk_dly) |
|
|
CCM_MMC_CTRL_SCLK_DLY(sclk_dly);
|
|
}
|
|
|
|
writel(CCM_MMC_CTRL_ENABLE| pll | CCM_MMC_CTRL_N(n) |
|
|
CCM_MMC_CTRL_M(div) | val, priv->mclkreg);
|
|
|
|
debug("mmc %u set mod-clk req %u parent %u n %u m %u rate %u\n",
|
|
priv->mmc_no, hz, pll_hz, 1u << n, div, pll_hz / (1u << n) / div);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mmc_update_clk(struct sunxi_mmc_priv *priv)
|
|
{
|
|
unsigned int cmd;
|
|
unsigned timeout_msecs = 2000;
|
|
unsigned long start = get_timer(0);
|
|
|
|
cmd = SUNXI_MMC_CMD_START |
|
|
SUNXI_MMC_CMD_UPCLK_ONLY |
|
|
SUNXI_MMC_CMD_WAIT_PRE_OVER;
|
|
|
|
writel(cmd, &priv->reg->cmd);
|
|
while (readl(&priv->reg->cmd) & SUNXI_MMC_CMD_START) {
|
|
if (get_timer(start) > timeout_msecs)
|
|
return -1;
|
|
}
|
|
|
|
/* clock update sets various irq status bits, clear these */
|
|
writel(readl(&priv->reg->rint), &priv->reg->rint);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mmc_config_clock(struct sunxi_mmc_priv *priv, struct mmc *mmc)
|
|
{
|
|
unsigned rval = readl(&priv->reg->clkcr);
|
|
|
|
/* Disable Clock */
|
|
rval &= ~SUNXI_MMC_CLK_ENABLE;
|
|
writel(rval, &priv->reg->clkcr);
|
|
if (mmc_update_clk(priv))
|
|
return -1;
|
|
|
|
/* Set mod_clk to new rate */
|
|
if (mmc_set_mod_clk(priv, mmc->clock))
|
|
return -1;
|
|
|
|
/* Clear internal divider */
|
|
rval &= ~SUNXI_MMC_CLK_DIVIDER_MASK;
|
|
writel(rval, &priv->reg->clkcr);
|
|
|
|
/* Re-enable Clock */
|
|
rval |= SUNXI_MMC_CLK_ENABLE;
|
|
writel(rval, &priv->reg->clkcr);
|
|
if (mmc_update_clk(priv))
|
|
return -1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sunxi_mmc_set_ios_common(struct sunxi_mmc_priv *priv,
|
|
struct mmc *mmc)
|
|
{
|
|
debug("set ios: bus_width: %x, clock: %d\n",
|
|
mmc->bus_width, mmc->clock);
|
|
|
|
/* Change clock first */
|
|
if (mmc->clock && mmc_config_clock(priv, mmc) != 0) {
|
|
priv->fatal_err = 1;
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Change bus width */
|
|
if (mmc->bus_width == 8)
|
|
writel(0x2, &priv->reg->width);
|
|
else if (mmc->bus_width == 4)
|
|
writel(0x1, &priv->reg->width);
|
|
else
|
|
writel(0x0, &priv->reg->width);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if !CONFIG_IS_ENABLED(DM_MMC)
|
|
static int sunxi_mmc_core_init(struct mmc *mmc)
|
|
{
|
|
struct sunxi_mmc_priv *priv = mmc->priv;
|
|
|
|
/* Reset controller */
|
|
writel(SUNXI_MMC_GCTRL_RESET, &priv->reg->gctrl);
|
|
udelay(1000);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int mmc_trans_data_by_cpu(struct sunxi_mmc_priv *priv, struct mmc *mmc,
|
|
struct mmc_data *data)
|
|
{
|
|
const int reading = !!(data->flags & MMC_DATA_READ);
|
|
const uint32_t status_bit = reading ? SUNXI_MMC_STATUS_FIFO_EMPTY :
|
|
SUNXI_MMC_STATUS_FIFO_FULL;
|
|
unsigned i;
|
|
unsigned *buff = (unsigned int *)(reading ? data->dest : data->src);
|
|
unsigned byte_cnt = data->blocksize * data->blocks;
|
|
unsigned timeout_msecs = byte_cnt >> 8;
|
|
unsigned long start;
|
|
|
|
if (timeout_msecs < 2000)
|
|
timeout_msecs = 2000;
|
|
|
|
/* Always read / write data through the CPU */
|
|
setbits_le32(&priv->reg->gctrl, SUNXI_MMC_GCTRL_ACCESS_BY_AHB);
|
|
|
|
start = get_timer(0);
|
|
|
|
for (i = 0; i < (byte_cnt >> 2); i++) {
|
|
while (readl(&priv->reg->status) & status_bit) {
|
|
if (get_timer(start) > timeout_msecs)
|
|
return -1;
|
|
}
|
|
|
|
if (reading)
|
|
buff[i] = readl(&priv->reg->fifo);
|
|
else
|
|
writel(buff[i], &priv->reg->fifo);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mmc_rint_wait(struct sunxi_mmc_priv *priv, struct mmc *mmc,
|
|
uint timeout_msecs, uint done_bit, const char *what)
|
|
{
|
|
unsigned int status;
|
|
unsigned long start = get_timer(0);
|
|
|
|
do {
|
|
status = readl(&priv->reg->rint);
|
|
if ((get_timer(start) > timeout_msecs) ||
|
|
(status & SUNXI_MMC_RINT_INTERRUPT_ERROR_BIT)) {
|
|
debug("%s timeout %x\n", what,
|
|
status & SUNXI_MMC_RINT_INTERRUPT_ERROR_BIT);
|
|
return -ETIMEDOUT;
|
|
}
|
|
} while (!(status & done_bit));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sunxi_mmc_send_cmd_common(struct sunxi_mmc_priv *priv,
|
|
struct mmc *mmc, struct mmc_cmd *cmd,
|
|
struct mmc_data *data)
|
|
{
|
|
unsigned int cmdval = SUNXI_MMC_CMD_START;
|
|
unsigned int timeout_msecs;
|
|
int error = 0;
|
|
unsigned int status = 0;
|
|
unsigned int bytecnt = 0;
|
|
|
|
if (priv->fatal_err)
|
|
return -1;
|
|
if (cmd->resp_type & MMC_RSP_BUSY)
|
|
debug("mmc cmd %d check rsp busy\n", cmd->cmdidx);
|
|
if (cmd->cmdidx == 12)
|
|
return 0;
|
|
|
|
if (!cmd->cmdidx)
|
|
cmdval |= SUNXI_MMC_CMD_SEND_INIT_SEQ;
|
|
if (cmd->resp_type & MMC_RSP_PRESENT)
|
|
cmdval |= SUNXI_MMC_CMD_RESP_EXPIRE;
|
|
if (cmd->resp_type & MMC_RSP_136)
|
|
cmdval |= SUNXI_MMC_CMD_LONG_RESPONSE;
|
|
if (cmd->resp_type & MMC_RSP_CRC)
|
|
cmdval |= SUNXI_MMC_CMD_CHK_RESPONSE_CRC;
|
|
|
|
if (data) {
|
|
if ((u32)(long)data->dest & 0x3) {
|
|
error = -1;
|
|
goto out;
|
|
}
|
|
|
|
cmdval |= SUNXI_MMC_CMD_DATA_EXPIRE|SUNXI_MMC_CMD_WAIT_PRE_OVER;
|
|
if (data->flags & MMC_DATA_WRITE)
|
|
cmdval |= SUNXI_MMC_CMD_WRITE;
|
|
if (data->blocks > 1)
|
|
cmdval |= SUNXI_MMC_CMD_AUTO_STOP;
|
|
writel(data->blocksize, &priv->reg->blksz);
|
|
writel(data->blocks * data->blocksize, &priv->reg->bytecnt);
|
|
}
|
|
|
|
debug("mmc %d, cmd %d(0x%08x), arg 0x%08x\n", priv->mmc_no,
|
|
cmd->cmdidx, cmdval | cmd->cmdidx, cmd->cmdarg);
|
|
writel(cmd->cmdarg, &priv->reg->arg);
|
|
|
|
if (!data)
|
|
writel(cmdval | cmd->cmdidx, &priv->reg->cmd);
|
|
|
|
/*
|
|
* transfer data and check status
|
|
* STATREG[2] : FIFO empty
|
|
* STATREG[3] : FIFO full
|
|
*/
|
|
if (data) {
|
|
int ret = 0;
|
|
|
|
bytecnt = data->blocksize * data->blocks;
|
|
debug("trans data %d bytes\n", bytecnt);
|
|
writel(cmdval | cmd->cmdidx, &priv->reg->cmd);
|
|
ret = mmc_trans_data_by_cpu(priv, mmc, data);
|
|
if (ret) {
|
|
error = readl(&priv->reg->rint) &
|
|
SUNXI_MMC_RINT_INTERRUPT_ERROR_BIT;
|
|
error = -ETIMEDOUT;
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
error = mmc_rint_wait(priv, mmc, 1000, SUNXI_MMC_RINT_COMMAND_DONE,
|
|
"cmd");
|
|
if (error)
|
|
goto out;
|
|
|
|
if (data) {
|
|
timeout_msecs = 120;
|
|
debug("cacl timeout %x msec\n", timeout_msecs);
|
|
error = mmc_rint_wait(priv, mmc, timeout_msecs,
|
|
data->blocks > 1 ?
|
|
SUNXI_MMC_RINT_AUTO_COMMAND_DONE :
|
|
SUNXI_MMC_RINT_DATA_OVER,
|
|
"data");
|
|
if (error)
|
|
goto out;
|
|
}
|
|
|
|
if (cmd->resp_type & MMC_RSP_BUSY) {
|
|
unsigned long start = get_timer(0);
|
|
timeout_msecs = 2000;
|
|
|
|
do {
|
|
status = readl(&priv->reg->status);
|
|
if (get_timer(start) > timeout_msecs) {
|
|
debug("busy timeout\n");
|
|
error = -ETIMEDOUT;
|
|
goto out;
|
|
}
|
|
} while (status & SUNXI_MMC_STATUS_CARD_DATA_BUSY);
|
|
}
|
|
|
|
if (cmd->resp_type & MMC_RSP_136) {
|
|
cmd->response[0] = readl(&priv->reg->resp3);
|
|
cmd->response[1] = readl(&priv->reg->resp2);
|
|
cmd->response[2] = readl(&priv->reg->resp1);
|
|
cmd->response[3] = readl(&priv->reg->resp0);
|
|
debug("mmc resp 0x%08x 0x%08x 0x%08x 0x%08x\n",
|
|
cmd->response[3], cmd->response[2],
|
|
cmd->response[1], cmd->response[0]);
|
|
} else {
|
|
cmd->response[0] = readl(&priv->reg->resp0);
|
|
debug("mmc resp 0x%08x\n", cmd->response[0]);
|
|
}
|
|
out:
|
|
if (error < 0) {
|
|
writel(SUNXI_MMC_GCTRL_RESET, &priv->reg->gctrl);
|
|
mmc_update_clk(priv);
|
|
}
|
|
writel(0xffffffff, &priv->reg->rint);
|
|
writel(readl(&priv->reg->gctrl) | SUNXI_MMC_GCTRL_FIFO_RESET,
|
|
&priv->reg->gctrl);
|
|
|
|
return error;
|
|
}
|
|
|
|
#if !CONFIG_IS_ENABLED(DM_MMC)
|
|
static int sunxi_mmc_set_ios_legacy(struct mmc *mmc)
|
|
{
|
|
struct sunxi_mmc_priv *priv = mmc->priv;
|
|
|
|
return sunxi_mmc_set_ios_common(priv, mmc);
|
|
}
|
|
|
|
static int sunxi_mmc_send_cmd_legacy(struct mmc *mmc, struct mmc_cmd *cmd,
|
|
struct mmc_data *data)
|
|
{
|
|
struct sunxi_mmc_priv *priv = mmc->priv;
|
|
|
|
return sunxi_mmc_send_cmd_common(priv, mmc, cmd, data);
|
|
}
|
|
|
|
static int sunxi_mmc_getcd_legacy(struct mmc *mmc)
|
|
{
|
|
struct sunxi_mmc_priv *priv = mmc->priv;
|
|
int cd_pin;
|
|
|
|
cd_pin = sunxi_mmc_getcd_gpio(priv->mmc_no);
|
|
if (cd_pin < 0)
|
|
return 1;
|
|
|
|
return !gpio_get_value(cd_pin);
|
|
}
|
|
|
|
static const struct mmc_ops sunxi_mmc_ops = {
|
|
.send_cmd = sunxi_mmc_send_cmd_legacy,
|
|
.set_ios = sunxi_mmc_set_ios_legacy,
|
|
.init = sunxi_mmc_core_init,
|
|
.getcd = sunxi_mmc_getcd_legacy,
|
|
};
|
|
|
|
struct mmc *sunxi_mmc_init(int sdc_no)
|
|
{
|
|
struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
|
|
struct sunxi_mmc_priv *priv = &mmc_host[sdc_no];
|
|
struct mmc_config *cfg = &priv->cfg;
|
|
int ret;
|
|
|
|
memset(priv, '\0', sizeof(struct sunxi_mmc_priv));
|
|
|
|
cfg->name = "SUNXI SD/MMC";
|
|
cfg->ops = &sunxi_mmc_ops;
|
|
|
|
cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
|
|
cfg->host_caps = MMC_MODE_4BIT;
|
|
#if defined(CONFIG_MACH_SUN50I) || defined(CONFIG_MACH_SUN8I) || defined(CONFIG_MACH_SUN50I_H6)
|
|
if (sdc_no == 2)
|
|
cfg->host_caps = MMC_MODE_8BIT;
|
|
#endif
|
|
cfg->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS;
|
|
cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
|
|
|
|
cfg->f_min = 400000;
|
|
cfg->f_max = 52000000;
|
|
|
|
if (mmc_resource_init(sdc_no) != 0)
|
|
return NULL;
|
|
|
|
/* config ahb clock */
|
|
debug("init mmc %d clock and io\n", sdc_no);
|
|
#if !defined(CONFIG_MACH_SUN50I_H6)
|
|
setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MMC(sdc_no));
|
|
|
|
#ifdef CONFIG_SUNXI_GEN_SUN6I
|
|
/* unassert reset */
|
|
setbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_RESET_OFFSET_MMC(sdc_no));
|
|
#endif
|
|
#if defined(CONFIG_MACH_SUN9I)
|
|
/* sun9i has a mmc-common module, also set the gate and reset there */
|
|
writel(SUNXI_MMC_COMMON_CLK_GATE | SUNXI_MMC_COMMON_RESET,
|
|
SUNXI_MMC_COMMON_BASE + 4 * sdc_no);
|
|
#endif
|
|
#else /* CONFIG_MACH_SUN50I_H6 */
|
|
setbits_le32(&ccm->sd_gate_reset, 1 << sdc_no);
|
|
/* unassert reset */
|
|
setbits_le32(&ccm->sd_gate_reset, 1 << (RESET_SHIFT + sdc_no));
|
|
#endif
|
|
ret = mmc_set_mod_clk(priv, 24000000);
|
|
if (ret)
|
|
return NULL;
|
|
|
|
return mmc_create(cfg, priv);
|
|
}
|
|
#else
|
|
|
|
static int sunxi_mmc_set_ios(struct udevice *dev)
|
|
{
|
|
struct sunxi_mmc_plat *plat = dev_get_platdata(dev);
|
|
struct sunxi_mmc_priv *priv = dev_get_priv(dev);
|
|
|
|
return sunxi_mmc_set_ios_common(priv, &plat->mmc);
|
|
}
|
|
|
|
static int sunxi_mmc_send_cmd(struct udevice *dev, struct mmc_cmd *cmd,
|
|
struct mmc_data *data)
|
|
{
|
|
struct sunxi_mmc_plat *plat = dev_get_platdata(dev);
|
|
struct sunxi_mmc_priv *priv = dev_get_priv(dev);
|
|
|
|
return sunxi_mmc_send_cmd_common(priv, &plat->mmc, cmd, data);
|
|
}
|
|
|
|
static int sunxi_mmc_getcd(struct udevice *dev)
|
|
{
|
|
struct sunxi_mmc_priv *priv = dev_get_priv(dev);
|
|
|
|
if (dm_gpio_is_valid(&priv->cd_gpio)) {
|
|
int cd_state = dm_gpio_get_value(&priv->cd_gpio);
|
|
|
|
return cd_state ^ priv->cd_inverted;
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
static const struct dm_mmc_ops sunxi_mmc_ops = {
|
|
.send_cmd = sunxi_mmc_send_cmd,
|
|
.set_ios = sunxi_mmc_set_ios,
|
|
.get_cd = sunxi_mmc_getcd,
|
|
};
|
|
|
|
static int sunxi_mmc_probe(struct udevice *dev)
|
|
{
|
|
struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
|
|
struct sunxi_mmc_plat *plat = dev_get_platdata(dev);
|
|
struct sunxi_mmc_priv *priv = dev_get_priv(dev);
|
|
struct mmc_config *cfg = &plat->cfg;
|
|
struct ofnode_phandle_args args;
|
|
u32 *gate_reg;
|
|
int bus_width, ret;
|
|
|
|
cfg->name = dev->name;
|
|
bus_width = dev_read_u32_default(dev, "bus-width", 1);
|
|
|
|
cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
|
|
cfg->host_caps = 0;
|
|
if (bus_width == 8)
|
|
cfg->host_caps |= MMC_MODE_8BIT;
|
|
if (bus_width >= 4)
|
|
cfg->host_caps |= MMC_MODE_4BIT;
|
|
cfg->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS;
|
|
cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
|
|
|
|
cfg->f_min = 400000;
|
|
cfg->f_max = 52000000;
|
|
|
|
priv->reg = (void *)dev_read_addr(dev);
|
|
|
|
/* We don't have a sunxi clock driver so find the clock address here */
|
|
ret = dev_read_phandle_with_args(dev, "clocks", "#clock-cells", 0,
|
|
1, &args);
|
|
if (ret)
|
|
return ret;
|
|
priv->mclkreg = (u32 *)ofnode_get_addr(args.node);
|
|
|
|
ret = dev_read_phandle_with_args(dev, "clocks", "#clock-cells", 0,
|
|
0, &args);
|
|
if (ret)
|
|
return ret;
|
|
gate_reg = (u32 *)ofnode_get_addr(args.node);
|
|
setbits_le32(gate_reg, 1 << args.args[0]);
|
|
priv->mmc_no = args.args[0] - 8;
|
|
|
|
ret = mmc_set_mod_clk(priv, 24000000);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* This GPIO is optional */
|
|
if (!gpio_request_by_name(dev, "cd-gpios", 0, &priv->cd_gpio,
|
|
GPIOD_IS_IN)) {
|
|
int cd_pin = gpio_get_number(&priv->cd_gpio);
|
|
|
|
sunxi_gpio_set_pull(cd_pin, SUNXI_GPIO_PULL_UP);
|
|
}
|
|
|
|
/* Check if card detect is inverted */
|
|
priv->cd_inverted = dev_read_bool(dev, "cd-inverted");
|
|
|
|
upriv->mmc = &plat->mmc;
|
|
|
|
/* Reset controller */
|
|
writel(SUNXI_MMC_GCTRL_RESET, &priv->reg->gctrl);
|
|
udelay(1000);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sunxi_mmc_bind(struct udevice *dev)
|
|
{
|
|
struct sunxi_mmc_plat *plat = dev_get_platdata(dev);
|
|
|
|
return mmc_bind(dev, &plat->mmc, &plat->cfg);
|
|
}
|
|
|
|
static const struct udevice_id sunxi_mmc_ids[] = {
|
|
{ .compatible = "allwinner,sun4i-a10-mmc" },
|
|
{ .compatible = "allwinner,sun5i-a13-mmc" },
|
|
{ .compatible = "allwinner,sun7i-a20-mmc" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(sunxi_mmc_drv) = {
|
|
.name = "sunxi_mmc",
|
|
.id = UCLASS_MMC,
|
|
.of_match = sunxi_mmc_ids,
|
|
.bind = sunxi_mmc_bind,
|
|
.probe = sunxi_mmc_probe,
|
|
.ops = &sunxi_mmc_ops,
|
|
.platdata_auto_alloc_size = sizeof(struct sunxi_mmc_plat),
|
|
.priv_auto_alloc_size = sizeof(struct sunxi_mmc_priv),
|
|
};
|
|
#endif
|
|
|