upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/cpu/ppc4xx/speed.c

924 lines
24 KiB

/*
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <ppc_asm.tmpl>
#include <ppc4xx.h>
#include <asm/processor.h>
DECLARE_GLOBAL_DATA_PTR;
#define ONE_BILLION 1000000000
#ifdef DEBUG
#define DEBUGF(fmt,args...) printf(fmt ,##args)
#else
#define DEBUGF(fmt,args...)
#endif
#if defined(CONFIG_405GP) || defined(CONFIG_405CR)
void get_sys_info (PPC405_SYS_INFO * sysInfo)
{
unsigned long pllmr;
unsigned long sysClkPeriodPs = ONE_BILLION / (CONFIG_SYS_CLK_FREQ / 1000);
uint pvr = get_pvr();
unsigned long psr;
unsigned long m;
/*
* Read PLL Mode register
*/
pllmr = mfdcr (pllmd);
/*
* Read Pin Strapping register
*/
psr = mfdcr (strap);
/*
* Determine FWD_DIV.
*/
sysInfo->pllFwdDiv = 8 - ((pllmr & PLLMR_FWD_DIV_MASK) >> 29);
/*
* Determine FBK_DIV.
*/
sysInfo->pllFbkDiv = ((pllmr & PLLMR_FB_DIV_MASK) >> 25);
if (sysInfo->pllFbkDiv == 0) {
sysInfo->pllFbkDiv = 16;
}
/*
* Determine PLB_DIV.
*/
sysInfo->pllPlbDiv = ((pllmr & PLLMR_CPU_TO_PLB_MASK) >> 17) + 1;
/*
* Determine PCI_DIV.
*/
sysInfo->pllPciDiv = ((pllmr & PLLMR_PCI_TO_PLB_MASK) >> 13) + 1;
/*
* Determine EXTBUS_DIV.
*/
sysInfo->pllExtBusDiv = ((pllmr & PLLMR_EXB_TO_PLB_MASK) >> 11) + 2;
/*
* Determine OPB_DIV.
*/
sysInfo->pllOpbDiv = ((pllmr & PLLMR_OPB_TO_PLB_MASK) >> 15) + 1;
/*
* Check if PPC405GPr used (mask minor revision field)
*/
if ((pvr & 0xfffffff0) == (PVR_405GPR_RB & 0xfffffff0)) {
/*
* Determine FWD_DIV B (only PPC405GPr with new mode strapping).
*/
sysInfo->pllFwdDivB = 8 - (pllmr & PLLMR_FWDB_DIV_MASK);
/*
* Determine factor m depending on PLL feedback clock source
*/
if (!(psr & PSR_PCI_ASYNC_EN)) {
if (psr & PSR_NEW_MODE_EN) {
/*
* sync pci clock used as feedback (new mode)
*/
m = 1 * sysInfo->pllFwdDivB * 2 * sysInfo->pllPciDiv;
} else {
/*
* sync pci clock used as feedback (legacy mode)
*/
m = 1 * sysInfo->pllFwdDivB * sysInfo->pllPlbDiv * sysInfo->pllPciDiv;
}
} else if (psr & PSR_NEW_MODE_EN) {
if (psr & PSR_PERCLK_SYNC_MODE_EN) {
/*
* PerClk used as feedback (new mode)
*/
m = 1 * sysInfo->pllFwdDivB * 2 * sysInfo->pllExtBusDiv;
} else {
/*
* CPU clock used as feedback (new mode)
*/
m = sysInfo->pllFbkDiv * sysInfo->pllFwdDiv;
}
} else if (sysInfo->pllExtBusDiv == sysInfo->pllFbkDiv) {
/*
* PerClk used as feedback (legacy mode)
*/
m = 1 * sysInfo->pllFwdDivB * sysInfo->pllPlbDiv * sysInfo->pllExtBusDiv;
} else {
/*
* PLB clock used as feedback (legacy mode)
*/
m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivB * sysInfo->pllPlbDiv;
}
sysInfo->freqVCOHz = (1000000000000LL * (unsigned long long)m) /
(unsigned long long)sysClkPeriodPs;
sysInfo->freqProcessor = sysInfo->freqVCOHz / sysInfo->pllFwdDiv;
sysInfo->freqPLB = sysInfo->freqVCOHz / (sysInfo->pllFwdDivB * sysInfo->pllPlbDiv);
} else {
/*
* Check pllFwdDiv to see if running in bypass mode where the CPU speed
* is equal to the 405GP SYS_CLK_FREQ. If not in bypass mode, check VCO
* to make sure it is within the proper range.
* spec: VCO = SYS_CLOCK x FBKDIV x PLBDIV x FWDDIV
* Note freqVCO is calculated in Mhz to avoid errors introduced by rounding.
*/
if (sysInfo->pllFwdDiv == 1) {
sysInfo->freqProcessor = CONFIG_SYS_CLK_FREQ;
sysInfo->freqPLB = CONFIG_SYS_CLK_FREQ / sysInfo->pllPlbDiv;
} else {
sysInfo->freqVCOHz = ( 1000000000000LL *
(unsigned long long)sysInfo->pllFwdDiv *
(unsigned long long)sysInfo->pllFbkDiv *
(unsigned long long)sysInfo->pllPlbDiv
) / (unsigned long long)sysClkPeriodPs;
sysInfo->freqPLB = (ONE_BILLION / ((sysClkPeriodPs * 10) /
sysInfo->pllFbkDiv)) * 10000;
sysInfo->freqProcessor = sysInfo->freqPLB * sysInfo->pllPlbDiv;
}
}
}
/********************************************
* get_OPB_freq
* return OPB bus freq in Hz
*********************************************/
ulong get_OPB_freq (void)
{
ulong val = 0;
PPC405_SYS_INFO sys_info;
get_sys_info (&sys_info);
val = sys_info.freqPLB / sys_info.pllOpbDiv;
return val;
}
/********************************************
* get_PCI_freq
* return PCI bus freq in Hz
*********************************************/
ulong get_PCI_freq (void)
{
ulong val;
PPC405_SYS_INFO sys_info;
get_sys_info (&sys_info);
val = sys_info.freqPLB / sys_info.pllPciDiv;
return val;
}
#elif defined(CONFIG_440)
#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
void get_sys_info (sys_info_t *sysInfo)
{
unsigned long temp;
unsigned long reg;
unsigned long lfdiv;
unsigned long m;
unsigned long prbdv0;
/*
WARNING: ASSUMES the following:
ENG=1
PRADV0=1
PRBDV0=1
*/
/* Decode CPR0_PLLD0 for divisors */
mfclk(clk_plld, reg);
temp = (reg & PLLD_FWDVA_MASK) >> 16;
sysInfo->pllFwdDivA = temp ? temp : 16;
temp = (reg & PLLD_FWDVB_MASK) >> 8;
sysInfo->pllFwdDivB = temp ? temp: 8 ;
temp = (reg & PLLD_FBDV_MASK) >> 24;
sysInfo->pllFbkDiv = temp ? temp : 32;
lfdiv = reg & PLLD_LFBDV_MASK;
mfclk(clk_opbd, reg);
temp = (reg & OPBDDV_MASK) >> 24;
sysInfo->pllOpbDiv = temp ? temp : 4;
mfclk(clk_perd, reg);
temp = (reg & PERDV_MASK) >> 24;
sysInfo->pllExtBusDiv = temp ? temp : 8;
mfclk(clk_primbd, reg);
temp = (reg & PRBDV_MASK) >> 24;
prbdv0 = temp ? temp : 8;
mfclk(clk_spcid, reg);
temp = (reg & SPCID_MASK) >> 24;
sysInfo->pllPciDiv = temp ? temp : 4;
/* Calculate 'M' based on feedback source */
mfsdr(sdr_sdstp0, reg);
temp = (reg & PLLSYS0_SEL_MASK) >> 27;
if (temp == 0) { /* PLL output */
/* Figure which pll to use */
mfclk(clk_pllc, reg);
temp = (reg & PLLC_SRC_MASK) >> 29;
if (!temp) /* PLLOUTA */
m = sysInfo->pllFbkDiv * lfdiv * sysInfo->pllFwdDivA;
else /* PLLOUTB */
m = sysInfo->pllFbkDiv * lfdiv * sysInfo->pllFwdDivB;
}
else if (temp == 1) /* CPU output */
m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivA;
else /* PerClk */
m = sysInfo->pllExtBusDiv * sysInfo->pllOpbDiv * sysInfo->pllFwdDivB;
/* Now calculate the individual clocks */
sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m>>1);
sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA;
sysInfo->freqPLB = sysInfo->freqVCOMhz/sysInfo->pllFwdDivB/prbdv0;
sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
sysInfo->freqEPB = sysInfo->freqPLB/sysInfo->pllExtBusDiv;
sysInfo->freqPCI = sysInfo->freqPLB/sysInfo->pllPciDiv;
/* Figure which timer source to use */
if (mfspr(ccr1) & 0x0080) { /* External Clock, assume same as SYS_CLK */
temp = sysInfo->freqProcessor / 2; /* Max extern clock speed */
if (CONFIG_SYS_CLK_FREQ > temp)
sysInfo->freqTmrClk = temp;
else
sysInfo->freqTmrClk = CONFIG_SYS_CLK_FREQ;
}
else /* Internal clock */
sysInfo->freqTmrClk = sysInfo->freqProcessor;
}
/********************************************
* get_PCI_freq
* return PCI bus freq in Hz
*********************************************/
ulong get_PCI_freq (void)
{
sys_info_t sys_info;
get_sys_info (&sys_info);
return sys_info.freqPCI;
}
#elif !defined(CONFIG_440GX) && !defined(CONFIG_440SP) && !defined(CONFIG_440SPE)
void get_sys_info (sys_info_t * sysInfo)
{
unsigned long strp0;
unsigned long temp;
unsigned long m;
/* Extract configured divisors */
strp0 = mfdcr( cpc0_strp0 );
sysInfo->pllFwdDivA = 8 - ((strp0 & PLLSYS0_FWD_DIV_A_MASK) >> 15);
sysInfo->pllFwdDivB = 8 - ((strp0 & PLLSYS0_FWD_DIV_B_MASK) >> 12);
temp = (strp0 & PLLSYS0_FB_DIV_MASK) >> 18;
sysInfo->pllFbkDiv = temp ? temp : 16;
sysInfo->pllOpbDiv = 1 + ((strp0 & PLLSYS0_OPB_DIV_MASK) >> 10);
sysInfo->pllExtBusDiv = 1 + ((strp0 & PLLSYS0_EPB_DIV_MASK) >> 8);
/* Calculate 'M' based on feedback source */
if( strp0 & PLLSYS0_EXTSL_MASK )
m = sysInfo->pllExtBusDiv * sysInfo->pllOpbDiv * sysInfo->pllFwdDivB;
else
m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivA;
/* Now calculate the individual clocks */
sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m>>1);
sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA;
sysInfo->freqPLB = sysInfo->freqVCOMhz/sysInfo->pllFwdDivB;
if( get_pvr() == PVR_440GP_RB ) /* Rev B divs an extra 2 -- geez! */
sysInfo->freqPLB >>= 1;
sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
sysInfo->freqEPB = sysInfo->freqOPB/sysInfo->pllExtBusDiv;
}
#else
void get_sys_info (sys_info_t * sysInfo)
{
unsigned long strp0;
unsigned long strp1;
unsigned long temp;
unsigned long temp1;
unsigned long lfdiv;
unsigned long m;
unsigned long prbdv0;
#if defined(CONFIG_YUCCA)
unsigned long sys_freq;
unsigned long sys_per=0;
unsigned long msr;
unsigned long pci_clock_per;
unsigned long sdr_ddrpll;
/*-------------------------------------------------------------------------+
| Get the system clock period.
+-------------------------------------------------------------------------*/
sys_per = determine_sysper();
msr = (mfmsr () & ~(MSR_EE)); /* disable interrupts */
/*-------------------------------------------------------------------------+
| Calculate the system clock speed from the period.
+-------------------------------------------------------------------------*/
sys_freq = (ONE_BILLION / sys_per) * 1000;
#endif
/* Extract configured divisors */
mfsdr( sdr_sdstp0,strp0 );
mfsdr( sdr_sdstp1,strp1 );
temp = ((strp0 & PLLSYS0_FWD_DIV_A_MASK) >> 8);
sysInfo->pllFwdDivA = temp ? temp : 16 ;
temp = ((strp0 & PLLSYS0_FWD_DIV_B_MASK) >> 5);
sysInfo->pllFwdDivB = temp ? temp: 8 ;
temp = (strp0 & PLLSYS0_FB_DIV_MASK) >> 12;
sysInfo->pllFbkDiv = temp ? temp : 32;
temp = (strp0 & PLLSYS0_OPB_DIV_MASK);
sysInfo->pllOpbDiv = temp ? temp : 4;
temp = (strp1 & PLLSYS1_PERCLK_DIV_MASK) >> 24;
sysInfo->pllExtBusDiv = temp ? temp : 4;
prbdv0 = (strp0 >> 2) & 0x7;
/* Calculate 'M' based on feedback source */
temp = (strp0 & PLLSYS0_SEL_MASK) >> 27;
temp1 = (strp1 & PLLSYS1_LF_DIV_MASK) >> 26;
lfdiv = temp1 ? temp1 : 64;
if (temp == 0) { /* PLL output */
/* Figure which pll to use */
temp = (strp0 & PLLSYS0_SRC_MASK) >> 30;
if (!temp)
m = sysInfo->pllFbkDiv * lfdiv * sysInfo->pllFwdDivA;
else
m = sysInfo->pllFbkDiv * lfdiv * sysInfo->pllFwdDivB;
}
else if (temp == 1) /* CPU output */
m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivA;
else /* PerClk */
m = sysInfo->pllExtBusDiv * sysInfo->pllOpbDiv * sysInfo->pllFwdDivB;
/* Now calculate the individual clocks */
#if defined(CONFIG_YUCCA)
sysInfo->freqVCOMhz = (m * sys_freq) ;
#else
sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m >> 1);
#endif
sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA;
sysInfo->freqPLB = sysInfo->freqVCOMhz/sysInfo->pllFwdDivB/prbdv0;
sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
sysInfo->freqEPB = sysInfo->freqOPB/sysInfo->pllExtBusDiv;
#if defined(CONFIG_YUCCA)
/* Determine PCI Clock Period */
pci_clock_per = determine_pci_clock_per();
sysInfo->freqPCI = (ONE_BILLION/pci_clock_per) * 1000;
mfsdr(sdr_ddr0, sdr_ddrpll);
sysInfo->freqDDR = ((sysInfo->freqPLB) * SDR0_DDR0_DDRM_DECODE(sdr_ddrpll));
#endif
}
#endif
#if defined(CONFIG_YUCCA)
unsigned long determine_sysper(void)
{
unsigned int fpga_clocking_reg;
unsigned int master_clock_selection;
unsigned long master_clock_per = 0;
unsigned long fb_div_selection;
unsigned int vco_div_reg_value;
unsigned long vco_div_selection;
unsigned long sys_per = 0;
int extClkVal;
/*-------------------------------------------------------------------------+
| Read FPGA reg 0 and reg 1 to get FPGA reg information
+-------------------------------------------------------------------------*/
fpga_clocking_reg = in16(FPGA_REG16);
/* Determine Master Clock Source Selection */
master_clock_selection = fpga_clocking_reg & FPGA_REG16_MASTER_CLK_MASK;
switch(master_clock_selection) {
case FPGA_REG16_MASTER_CLK_66_66:
master_clock_per = PERIOD_66_66MHZ;
break;
case FPGA_REG16_MASTER_CLK_50:
master_clock_per = PERIOD_50_00MHZ;
break;
case FPGA_REG16_MASTER_CLK_33_33:
master_clock_per = PERIOD_33_33MHZ;
break;
case FPGA_REG16_MASTER_CLK_25:
master_clock_per = PERIOD_25_00MHZ;
break;
case FPGA_REG16_MASTER_CLK_EXT:
if ((extClkVal==EXTCLK_33_33)
&& (extClkVal==EXTCLK_50)
&& (extClkVal==EXTCLK_66_66)
&& (extClkVal==EXTCLK_83)) {
/* calculate master clock period from external clock value */
master_clock_per=(ONE_BILLION/extClkVal) * 1000;
} else {
/* Unsupported */
DEBUGF ("%s[%d] *** master clock selection failed ***\n", __FUNCTION__,__LINE__);
hang();
}
break;
default:
/* Unsupported */
DEBUGF ("%s[%d] *** master clock selection failed ***\n", __FUNCTION__,__LINE__);
hang();
break;
}
/* Determine FB divisors values */
if ((fpga_clocking_reg & FPGA_REG16_FB1_DIV_MASK) == FPGA_REG16_FB1_DIV_LOW) {
if ((fpga_clocking_reg & FPGA_REG16_FB2_DIV_MASK) == FPGA_REG16_FB2_DIV_LOW)
fb_div_selection = FPGA_FB_DIV_6;
else
fb_div_selection = FPGA_FB_DIV_12;
} else {
if ((fpga_clocking_reg & FPGA_REG16_FB2_DIV_MASK) == FPGA_REG16_FB2_DIV_LOW)
fb_div_selection = FPGA_FB_DIV_10;
else
fb_div_selection = FPGA_FB_DIV_20;
}
/* Determine VCO divisors values */
vco_div_reg_value = fpga_clocking_reg & FPGA_REG16_VCO_DIV_MASK;
switch(vco_div_reg_value) {
case FPGA_REG16_VCO_DIV_4:
vco_div_selection = FPGA_VCO_DIV_4;
break;
case FPGA_REG16_VCO_DIV_6:
vco_div_selection = FPGA_VCO_DIV_6;
break;
case FPGA_REG16_VCO_DIV_8:
vco_div_selection = FPGA_VCO_DIV_8;
break;
case FPGA_REG16_VCO_DIV_10:
default:
vco_div_selection = FPGA_VCO_DIV_10;
break;
}
if (master_clock_selection == FPGA_REG16_MASTER_CLK_EXT) {
switch(master_clock_per) {
case PERIOD_25_00MHZ:
if (fb_div_selection == FPGA_FB_DIV_12) {
if (vco_div_selection == FPGA_VCO_DIV_4)
sys_per = PERIOD_75_00MHZ;
if (vco_div_selection == FPGA_VCO_DIV_6)
sys_per = PERIOD_50_00MHZ;
}
break;
case PERIOD_33_33MHZ:
if (fb_div_selection == FPGA_FB_DIV_6) {
if (vco_div_selection == FPGA_VCO_DIV_4)
sys_per = PERIOD_50_00MHZ;
if (vco_div_selection == FPGA_VCO_DIV_6)
sys_per = PERIOD_33_33MHZ;
}
if (fb_div_selection == FPGA_FB_DIV_10) {
if (vco_div_selection == FPGA_VCO_DIV_4)
sys_per = PERIOD_83_33MHZ;
if (vco_div_selection == FPGA_VCO_DIV_10)
sys_per = PERIOD_33_33MHZ;
}
if (fb_div_selection == FPGA_FB_DIV_12) {
if (vco_div_selection == FPGA_VCO_DIV_4)
sys_per = PERIOD_100_00MHZ;
if (vco_div_selection == FPGA_VCO_DIV_6)
sys_per = PERIOD_66_66MHZ;
if (vco_div_selection == FPGA_VCO_DIV_8)
sys_per = PERIOD_50_00MHZ;
}
break;
case PERIOD_50_00MHZ:
if (fb_div_selection == FPGA_FB_DIV_6) {
if (vco_div_selection == FPGA_VCO_DIV_4)
sys_per = PERIOD_75_00MHZ;
if (vco_div_selection == FPGA_VCO_DIV_6)
sys_per = PERIOD_50_00MHZ;
}
if (fb_div_selection == FPGA_FB_DIV_10) {
if (vco_div_selection == FPGA_VCO_DIV_6)
sys_per = PERIOD_83_33MHZ;
if (vco_div_selection == FPGA_VCO_DIV_10)
sys_per = PERIOD_50_00MHZ;
}
if (fb_div_selection == FPGA_FB_DIV_12) {
if (vco_div_selection == FPGA_VCO_DIV_6)
sys_per = PERIOD_100_00MHZ;
if (vco_div_selection == FPGA_VCO_DIV_8)
sys_per = PERIOD_75_00MHZ;
}
break;
case PERIOD_66_66MHZ:
if (fb_div_selection == FPGA_FB_DIV_6) {
if (vco_div_selection == FPGA_VCO_DIV_4)
sys_per = PERIOD_100_00MHZ;
if (vco_div_selection == FPGA_VCO_DIV_6)
sys_per = PERIOD_66_66MHZ;
if (vco_div_selection == FPGA_VCO_DIV_8)
sys_per = PERIOD_50_00MHZ;
}
if (fb_div_selection == FPGA_FB_DIV_10) {
if (vco_div_selection == FPGA_VCO_DIV_8)
sys_per = PERIOD_83_33MHZ;
if (vco_div_selection == FPGA_VCO_DIV_10)
sys_per = PERIOD_66_66MHZ;
}
if (fb_div_selection == FPGA_FB_DIV_12) {
if (vco_div_selection == FPGA_VCO_DIV_8)
sys_per = PERIOD_100_00MHZ;
}
break;
default:
break;
}
if (sys_per == 0) {
/* Other combinations are not supported */
DEBUGF ("%s[%d] *** sys period compute failed ***\n", __FUNCTION__,__LINE__);
hang();
}
} else {
/* calcul system clock without cheking */
/* if engineering option clock no check is selected */
/* sys_per = master_clock_per * vco_div_selection / fb_div_selection */
sys_per = (master_clock_per/fb_div_selection) * vco_div_selection;
}
return(sys_per);
}
/*-------------------------------------------------------------------------+
| determine_pci_clock_per.
+-------------------------------------------------------------------------*/
unsigned long determine_pci_clock_per(void)
{
unsigned long pci_clock_selection, pci_period;
/*-------------------------------------------------------------------------+
| Read FPGA reg 6 to get PCI 0 FPGA reg information
+-------------------------------------------------------------------------*/
pci_clock_selection = in16(FPGA_REG16); /* was reg6 averifier */
pci_clock_selection = pci_clock_selection & FPGA_REG16_PCI0_CLK_MASK;
switch (pci_clock_selection) {
case FPGA_REG16_PCI0_CLK_133_33:
pci_period = PERIOD_133_33MHZ;
break;
case FPGA_REG16_PCI0_CLK_100:
pci_period = PERIOD_100_00MHZ;
break;
case FPGA_REG16_PCI0_CLK_66_66:
pci_period = PERIOD_66_66MHZ;
break;
default:
pci_period = PERIOD_33_33MHZ;;
break;
}
return(pci_period);
}
#endif
ulong get_OPB_freq (void)
{
sys_info_t sys_info;
get_sys_info (&sys_info);
return sys_info.freqOPB;
}
#elif defined(CONFIG_XILINX_ML300)
extern void get_sys_info (sys_info_t * sysInfo);
extern ulong get_PCI_freq (void);
#elif defined(CONFIG_AP1000)
void get_sys_info (sys_info_t * sysInfo) {
sysInfo->freqProcessor = 240 * 1000 * 1000;
sysInfo->freqPLB = 80 * 1000 * 1000;
sysInfo->freqPCI = 33 * 1000 * 1000;
}
#elif defined(CONFIG_405)
void get_sys_info (sys_info_t * sysInfo) {
sysInfo->freqVCOMhz=3125000;
sysInfo->freqProcessor=12*1000*1000;
sysInfo->freqPLB=50*1000*1000;
sysInfo->freqPCI=66*1000*1000;
}
#elif defined(CONFIG_405EP)
void get_sys_info (PPC405_SYS_INFO * sysInfo)
{
unsigned long pllmr0;
unsigned long pllmr1;
unsigned long sysClkPeriodPs = ONE_BILLION / (CONFIG_SYS_CLK_FREQ / 1000);
unsigned long m;
unsigned long pllmr0_ccdv;
/*
* Read PLL Mode registers
*/
pllmr0 = mfdcr (cpc0_pllmr0);
pllmr1 = mfdcr (cpc0_pllmr1);
/*
* Determine forward divider A
*/
sysInfo->pllFwdDiv = 8 - ((pllmr1 & PLLMR1_FWDVA_MASK) >> 16);
/*
* Determine forward divider B (should be equal to A)
*/
sysInfo->pllFwdDivB = 8 - ((pllmr1 & PLLMR1_FWDVB_MASK) >> 12);
/*
* Determine FBK_DIV.
*/
sysInfo->pllFbkDiv = ((pllmr1 & PLLMR1_FBMUL_MASK) >> 20);
if (sysInfo->pllFbkDiv == 0) {
sysInfo->pllFbkDiv = 16;
}
/*
* Determine PLB_DIV.
*/
sysInfo->pllPlbDiv = ((pllmr0 & PLLMR0_CPU_TO_PLB_MASK) >> 16) + 1;
/*
* Determine PCI_DIV.
*/
sysInfo->pllPciDiv = (pllmr0 & PLLMR0_PCI_TO_PLB_MASK) + 1;
/*
* Determine EXTBUS_DIV.
*/
sysInfo->pllExtBusDiv = ((pllmr0 & PLLMR0_EXB_TO_PLB_MASK) >> 8) + 2;
/*
* Determine OPB_DIV.
*/
sysInfo->pllOpbDiv = ((pllmr0 & PLLMR0_OPB_TO_PLB_MASK) >> 12) + 1;
/*
* Determine the M factor
*/
m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivB;
/*
* Determine VCO clock frequency
*/
sysInfo->freqVCOHz = (1000000000000LL * (unsigned long long)m) /
(unsigned long long)sysClkPeriodPs;
/*
* Determine CPU clock frequency
*/
pllmr0_ccdv = ((pllmr0 & PLLMR0_CPU_DIV_MASK) >> 20) + 1;
if (pllmr1 & PLLMR1_SSCS_MASK) {
/*
* This is true if FWDVA == FWDVB:
* sysInfo->freqProcessor = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv)
* / pllmr0_ccdv;
*/
sysInfo->freqProcessor = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv * sysInfo->pllFwdDivB)
/ sysInfo->pllFwdDiv / pllmr0_ccdv;
} else {
sysInfo->freqProcessor = CONFIG_SYS_CLK_FREQ / pllmr0_ccdv;
}
/*
* Determine PLB clock frequency
*/
sysInfo->freqPLB = sysInfo->freqProcessor / sysInfo->pllPlbDiv;
}
/********************************************
* get_OPB_freq
* return OPB bus freq in Hz
*********************************************/
ulong get_OPB_freq (void)
{
ulong val = 0;
PPC405_SYS_INFO sys_info;
get_sys_info (&sys_info);
val = sys_info.freqPLB / sys_info.pllOpbDiv;
return val;
}
/********************************************
* get_PCI_freq
* return PCI bus freq in Hz
*********************************************/
ulong get_PCI_freq (void)
{
ulong val;
PPC405_SYS_INFO sys_info;
get_sys_info (&sys_info);
val = sys_info.freqPLB / sys_info.pllPciDiv;
return val;
}
#elif defined(CONFIG_405EZ)
void get_sys_info (PPC405_SYS_INFO * sysInfo)
{
unsigned long cpr_plld;
unsigned long cpr_primad;
unsigned long sysClkPeriodPs = ONE_BILLION / (CONFIG_SYS_CLK_FREQ/1000);
unsigned long primad_cpudv;
unsigned long m;
/*
* Read PLL Mode registers
*/
mfcpr(cprplld, cpr_plld);
/*
* Determine forward divider A
*/
sysInfo->pllFwdDiv = ((cpr_plld & PLLD_FWDVA_MASK) >> 16);
/*
* Determine forward divider B (should be equal to A)
*/
sysInfo->pllFwdDivB = ((cpr_plld & PLLD_FWDVB_MASK) >> 8);
if (sysInfo->pllFwdDivB == 0) {
sysInfo->pllFwdDivB = 8;
}
/*
* Determine FBK_DIV.
*/
sysInfo->pllFbkDiv = ((cpr_plld & PLLD_FBDV_MASK) >> 24);
if (sysInfo->pllFbkDiv == 0) {
sysInfo->pllFbkDiv = 256;
}
/*
* Read CPR_PRIMAD register
*/
mfcpr(cprprimad, cpr_primad);
/*
* Determine PLB_DIV.
*/
sysInfo->pllPlbDiv = ((cpr_primad & PRIMAD_PLBDV_MASK) >> 16);
if (sysInfo->pllPlbDiv == 0) {
sysInfo->pllPlbDiv = 16;
}
/*
* Determine EXTBUS_DIV.
*/
sysInfo->pllExtBusDiv = (cpr_primad & PRIMAD_EBCDV_MASK);
if (sysInfo->pllExtBusDiv == 0) {
sysInfo->pllExtBusDiv = 16;
}
/*
* Determine OPB_DIV.
*/
sysInfo->pllOpbDiv = ((cpr_primad & PRIMAD_OPBDV_MASK) >> 8);
if (sysInfo->pllOpbDiv == 0) {
sysInfo->pllOpbDiv = 16;
}
/*
* Determine the M factor
*/
m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivB;
/*
* Determine VCO clock frequency
*/
sysInfo->freqVCOHz = (1000000000000LL * (unsigned long long)m) /
(unsigned long long)sysClkPeriodPs;
/*
* Determine CPU clock frequency
*/
primad_cpudv = ((cpr_primad & PRIMAD_CPUDV_MASK) >> 24);
if (primad_cpudv == 0) {
primad_cpudv = 16;
}
sysInfo->freqProcessor = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv) / primad_cpudv;
/*
* Determine PLB clock frequency
*/
sysInfo->freqPLB = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv) / sysInfo->pllPlbDiv;
}
/********************************************
* get_OPB_freq
* return OPB bus freq in Hz
*********************************************/
ulong get_OPB_freq (void)
{
ulong val = 0;
PPC405_SYS_INFO sys_info;
get_sys_info (&sys_info);
val = (CONFIG_SYS_CLK_FREQ * sys_info.pllFbkDiv) / sys_info.pllOpbDiv;
return val;
}
#endif
int get_clocks (void)
{
#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
defined(CONFIG_440) || defined(CONFIG_405)
sys_info_t sys_info;
get_sys_info (&sys_info);
gd->cpu_clk = sys_info.freqProcessor;
gd->bus_clk = sys_info.freqPLB;
#endif /* defined(CONFIG_405GP) || defined(CONFIG_405CR) */
#ifdef CONFIG_IOP480
gd->cpu_clk = 66000000;
gd->bus_clk = 66000000;
#endif
return (0);
}
/********************************************
* get_bus_freq
* return PLB bus freq in Hz
*********************************************/
ulong get_bus_freq (ulong dummy)
{
ulong val;
#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
defined(CONFIG_440) || defined(CONFIG_405)
sys_info_t sys_info;
get_sys_info (&sys_info);
val = sys_info.freqPLB;
#elif defined(CONFIG_IOP480)
val = 66;
#else
# error get_bus_freq() not implemented
#endif
return val;
}