upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
113 lines
3.1 KiB
113 lines
3.1 KiB
/*
|
|
* Copyright (c) 2009 Wind River Systems, Inc.
|
|
* Tom Rix <Tom.Rix at windriver.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*
|
|
* twl4030_power_reset_init is derived from code on omapzoom,
|
|
* git://git.omapzoom.com/repo/u-boot.git
|
|
*
|
|
* Copyright (C) 2007-2009 Texas Instruments, Inc.
|
|
*
|
|
* twl4030_power_init is from cpu/omap3/common.c, power_init_r
|
|
*
|
|
* (C) Copyright 2004-2008
|
|
* Texas Instruments, <www.ti.com>
|
|
*
|
|
* Author :
|
|
* Sunil Kumar <sunilsaini05 at gmail.com>
|
|
* Shashi Ranjan <shashiranjanmca05 at gmail.com>
|
|
*
|
|
* Derived from Beagle Board and 3430 SDP code by
|
|
* Richard Woodruff <r-woodruff2 at ti.com>
|
|
* Syed Mohammed Khasim <khasim at ti.com>
|
|
*/
|
|
|
|
#include <twl4030.h>
|
|
|
|
/*
|
|
* Power Reset
|
|
*/
|
|
void twl4030_power_reset_init(void)
|
|
{
|
|
u8 val = 0;
|
|
if (twl4030_i2c_read_u8(TWL4030_CHIP_PM_MASTER,
|
|
TWL4030_PM_MASTER_P1_SW_EVENTS, &val)) {
|
|
printf("Error:TWL4030: failed to read the power register\n");
|
|
printf("Could not initialize hardware reset\n");
|
|
} else {
|
|
val |= TWL4030_PM_MASTER_SW_EVENTS_STOPON_PWRON;
|
|
if (twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER,
|
|
TWL4030_PM_MASTER_P1_SW_EVENTS, val)) {
|
|
printf("Error:TWL4030: failed to write the power register\n");
|
|
printf("Could not initialize hardware reset\n");
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Set Device Group and Voltage
|
|
*/
|
|
void twl4030_pmrecv_vsel_cfg(u8 vsel_reg, u8 vsel_val,
|
|
u8 dev_grp, u8 dev_grp_sel)
|
|
{
|
|
int ret;
|
|
|
|
/* Select the Voltage */
|
|
ret = twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, vsel_reg,
|
|
vsel_val);
|
|
if (ret != 0) {
|
|
printf("Could not write vsel to reg %02x (%d)\n",
|
|
vsel_reg, ret);
|
|
return;
|
|
}
|
|
|
|
/* Select the Device Group (enable the supply if dev_grp_sel != 0) */
|
|
ret = twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, dev_grp,
|
|
dev_grp_sel);
|
|
if (ret != 0)
|
|
printf("Could not write grp_sel to reg %02x (%d)\n",
|
|
dev_grp, ret);
|
|
}
|
|
|
|
void twl4030_power_init(void)
|
|
{
|
|
/* set VAUX3 to 2.8V */
|
|
twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX3_DEDICATED,
|
|
TWL4030_PM_RECEIVER_VAUX3_VSEL_28,
|
|
TWL4030_PM_RECEIVER_VAUX3_DEV_GRP,
|
|
TWL4030_PM_RECEIVER_DEV_GRP_P1);
|
|
|
|
/* set VPLL2 to 1.8V */
|
|
twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VPLL2_DEDICATED,
|
|
TWL4030_PM_RECEIVER_VPLL2_VSEL_18,
|
|
TWL4030_PM_RECEIVER_VPLL2_DEV_GRP,
|
|
TWL4030_PM_RECEIVER_DEV_GRP_ALL);
|
|
|
|
/* set VDAC to 1.8V */
|
|
twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VDAC_DEDICATED,
|
|
TWL4030_PM_RECEIVER_VDAC_VSEL_18,
|
|
TWL4030_PM_RECEIVER_VDAC_DEV_GRP,
|
|
TWL4030_PM_RECEIVER_DEV_GRP_P1);
|
|
}
|
|
|
|
void twl4030_power_mmc_init(int dev_index)
|
|
{
|
|
if (dev_index == 0) {
|
|
/* Set VMMC1 to 3.15 Volts */
|
|
twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VMMC1_DEDICATED,
|
|
TWL4030_PM_RECEIVER_VMMC1_VSEL_32,
|
|
TWL4030_PM_RECEIVER_VMMC1_DEV_GRP,
|
|
TWL4030_PM_RECEIVER_DEV_GRP_P1);
|
|
|
|
mdelay(100); /* ramp-up delay from Linux code */
|
|
} else if (dev_index == 1) {
|
|
/* Set VMMC2 to 3.15 Volts */
|
|
twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VMMC2_DEDICATED,
|
|
TWL4030_PM_RECEIVER_VMMC2_VSEL_32,
|
|
TWL4030_PM_RECEIVER_VMMC2_DEV_GRP,
|
|
TWL4030_PM_RECEIVER_DEV_GRP_P1);
|
|
|
|
mdelay(100); /* ramp-up delay from Linux code */
|
|
}
|
|
}
|
|
|