upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
249 lines
6.4 KiB
249 lines
6.4 KiB
/*
|
|
* LPC32xx I2C interface driver
|
|
*
|
|
* (C) Copyright 2014 DENX Software Engineering GmbH
|
|
* Written-by: Albert ARIBAUD - 3ADEV <albert.aribaud@3adev.fr>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <i2c.h>
|
|
#include <asm/errno.h>
|
|
#include <asm/arch/clk.h>
|
|
|
|
/*
|
|
* Provide default speed and slave if target did not
|
|
*/
|
|
|
|
#if !defined(CONFIG_SYS_I2C_LPC32XX_SPEED)
|
|
#define CONFIG_SYS_I2C_LPC32XX_SPEED 350000
|
|
#endif
|
|
|
|
#if !defined(CONFIG_SYS_I2C_LPC32XX_SLAVE)
|
|
#define CONFIG_SYS_I2C_LPC32XX_SLAVE 0
|
|
#endif
|
|
|
|
/* i2c register set */
|
|
struct lpc32xx_i2c_registers {
|
|
union {
|
|
u32 rx;
|
|
u32 tx;
|
|
};
|
|
u32 stat;
|
|
u32 ctrl;
|
|
u32 clk_hi;
|
|
u32 clk_lo;
|
|
u32 adr;
|
|
u32 rxfl;
|
|
u32 txfl;
|
|
u32 rxb;
|
|
u32 txb;
|
|
u32 stx;
|
|
u32 stxfl;
|
|
};
|
|
|
|
/* TX register fields */
|
|
#define LPC32XX_I2C_TX_START 0x00000100
|
|
#define LPC32XX_I2C_TX_STOP 0x00000200
|
|
|
|
/* Control register values */
|
|
#define LPC32XX_I2C_SOFT_RESET 0x00000100
|
|
|
|
/* Status register values */
|
|
#define LPC32XX_I2C_STAT_TFF 0x00000400
|
|
#define LPC32XX_I2C_STAT_RFE 0x00000200
|
|
#define LPC32XX_I2C_STAT_DRMI 0x00000008
|
|
#define LPC32XX_I2C_STAT_NAI 0x00000004
|
|
#define LPC32XX_I2C_STAT_TDI 0x00000001
|
|
|
|
static struct lpc32xx_i2c_registers *lpc32xx_i2c[] = {
|
|
(struct lpc32xx_i2c_registers *)I2C1_BASE,
|
|
(struct lpc32xx_i2c_registers *)I2C2_BASE
|
|
};
|
|
|
|
/* Set I2C bus speed */
|
|
static unsigned int lpc32xx_i2c_set_bus_speed(struct i2c_adapter *adap,
|
|
unsigned int speed)
|
|
{
|
|
int half_period;
|
|
|
|
if (speed == 0)
|
|
return -EINVAL;
|
|
|
|
half_period = (105000000 / speed) / 2;
|
|
|
|
if ((half_period > 255) || (half_period < 0))
|
|
return -EINVAL;
|
|
|
|
writel(half_period, &lpc32xx_i2c[adap->hwadapnr]->clk_hi);
|
|
writel(half_period, &lpc32xx_i2c[adap->hwadapnr]->clk_lo);
|
|
return 0;
|
|
}
|
|
|
|
/* I2C init called by cmd_i2c when doing 'i2c reset'. */
|
|
static void _i2c_init(struct i2c_adapter *adap,
|
|
int requested_speed, int slaveadd)
|
|
{
|
|
struct lpc32xx_i2c_registers *i2c = lpc32xx_i2c[adap->hwadapnr];
|
|
|
|
/* soft reset (auto-clears) */
|
|
writel(LPC32XX_I2C_SOFT_RESET, &i2c->ctrl);
|
|
/* set HI and LO periods for about 350 kHz */
|
|
lpc32xx_i2c_set_bus_speed(adap, requested_speed);
|
|
}
|
|
|
|
/* I2C probe called by cmd_i2c when doing 'i2c probe'. */
|
|
static int lpc32xx_i2c_probe(struct i2c_adapter *adap, u8 dev)
|
|
{
|
|
struct lpc32xx_i2c_registers *i2c = lpc32xx_i2c[adap->hwadapnr];
|
|
int stat;
|
|
|
|
/* Soft-reset the controller */
|
|
writel(LPC32XX_I2C_SOFT_RESET, &i2c->ctrl);
|
|
while (readl(&i2c->ctrl) & LPC32XX_I2C_SOFT_RESET)
|
|
;
|
|
/* Addre slave for write with start before and stop after */
|
|
writel((dev<<1) | LPC32XX_I2C_TX_START | LPC32XX_I2C_TX_STOP,
|
|
&i2c->tx);
|
|
/* wait for end of transation */
|
|
while (!((stat = readl(&i2c->stat)) & LPC32XX_I2C_STAT_TDI))
|
|
;
|
|
/* was there no acknowledge? */
|
|
return (stat & LPC32XX_I2C_STAT_NAI) ? -1 : 0;
|
|
}
|
|
|
|
/*
|
|
* I2C read called by cmd_i2c when doing 'i2c read' and by cmd_eeprom.c
|
|
* Begin write, send address byte(s), begin read, receive data bytes, end.
|
|
*/
|
|
static int lpc32xx_i2c_read(struct i2c_adapter *adap, u8 dev, uint addr,
|
|
int alen, u8 *data, int length)
|
|
{
|
|
struct lpc32xx_i2c_registers *i2c = lpc32xx_i2c[adap->hwadapnr];
|
|
int stat, wlen;
|
|
|
|
/* Soft-reset the controller */
|
|
writel(LPC32XX_I2C_SOFT_RESET, &i2c->ctrl);
|
|
while (readl(&i2c->ctrl) & LPC32XX_I2C_SOFT_RESET)
|
|
;
|
|
/* do we need to write an address at all? */
|
|
if (alen) {
|
|
/* Address slave in write mode */
|
|
writel((dev<<1) | LPC32XX_I2C_TX_START, &i2c->tx);
|
|
/* write address bytes */
|
|
while (alen--) {
|
|
/* compute address byte + stop for the last one */
|
|
int a = (addr >> (8 * alen)) & 0xff;
|
|
if (!alen)
|
|
a |= LPC32XX_I2C_TX_STOP;
|
|
/* Send address byte */
|
|
writel(a, &i2c->tx);
|
|
}
|
|
/* wait for end of transation */
|
|
while (!((stat = readl(&i2c->stat)) & LPC32XX_I2C_STAT_TDI))
|
|
;
|
|
/* clear end-of-transaction flag */
|
|
writel(1, &i2c->stat);
|
|
}
|
|
/* do we have to read data at all? */
|
|
if (length) {
|
|
/* Address slave in read mode */
|
|
writel(1 | (dev<<1) | LPC32XX_I2C_TX_START, &i2c->tx);
|
|
wlen = length;
|
|
/* get data */
|
|
while (length | wlen) {
|
|
/* read status for TFF and RFE */
|
|
stat = readl(&i2c->stat);
|
|
/* must we, can we write a trigger byte? */
|
|
if ((wlen > 0)
|
|
& (!(stat & LPC32XX_I2C_STAT_TFF))) {
|
|
wlen--;
|
|
/* write trigger byte + stop if last */
|
|
writel(wlen ? 0 :
|
|
LPC32XX_I2C_TX_STOP, &i2c->tx);
|
|
}
|
|
/* must we, can we read a data byte? */
|
|
if ((length > 0)
|
|
& (!(stat & LPC32XX_I2C_STAT_RFE))) {
|
|
length--;
|
|
/* read byte */
|
|
*(data++) = readl(&i2c->rx);
|
|
}
|
|
}
|
|
}
|
|
/* wait for end of transation */
|
|
while (!((stat = readl(&i2c->stat)) & LPC32XX_I2C_STAT_TDI))
|
|
;
|
|
/* clear end-of-transaction flag */
|
|
writel(1, &i2c->stat);
|
|
/* success */
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* I2C write called by cmd_i2c when doing 'i2c write' and by cmd_eeprom.c
|
|
* Begin write, send address byte(s), send data bytes, end.
|
|
*/
|
|
static int lpc32xx_i2c_write(struct i2c_adapter *adap, u8 dev, uint addr,
|
|
int alen, u8 *data, int length)
|
|
{
|
|
struct lpc32xx_i2c_registers *i2c = lpc32xx_i2c[adap->hwadapnr];
|
|
int stat;
|
|
|
|
/* Soft-reset the controller */
|
|
writel(LPC32XX_I2C_SOFT_RESET, &i2c->ctrl);
|
|
while (readl(&i2c->ctrl) & LPC32XX_I2C_SOFT_RESET)
|
|
;
|
|
/* do we need to write anything at all? */
|
|
if (alen | length)
|
|
/* Address slave in write mode */
|
|
writel((dev<<1) | LPC32XX_I2C_TX_START, &i2c->tx);
|
|
/* write address bytes */
|
|
while (alen) {
|
|
/* wait for transmit fifo not full */
|
|
stat = readl(&i2c->stat);
|
|
if (!(stat & LPC32XX_I2C_STAT_TFF)) {
|
|
alen--;
|
|
int a = (addr >> (8 * alen)) & 0xff;
|
|
if (!(alen | length))
|
|
a |= LPC32XX_I2C_TX_STOP;
|
|
/* Send address byte */
|
|
writel(a, &i2c->tx);
|
|
}
|
|
}
|
|
while (length) {
|
|
/* wait for transmit fifo not full */
|
|
stat = readl(&i2c->stat);
|
|
if (!(stat & LPC32XX_I2C_STAT_TFF)) {
|
|
/* compute data byte, add stop if length==0 */
|
|
length--;
|
|
int d = *(data++);
|
|
if (!length)
|
|
d |= LPC32XX_I2C_TX_STOP;
|
|
/* Send data byte */
|
|
writel(d, &i2c->tx);
|
|
}
|
|
}
|
|
/* wait for end of transation */
|
|
while (!((stat = readl(&i2c->stat)) & LPC32XX_I2C_STAT_TDI))
|
|
;
|
|
/* clear end-of-transaction flag */
|
|
writel(1, &i2c->stat);
|
|
return 0;
|
|
}
|
|
|
|
U_BOOT_I2C_ADAP_COMPLETE(lpc32xx_0, _i2c_init, lpc32xx_i2c_probe,
|
|
lpc32xx_i2c_read, lpc32xx_i2c_write,
|
|
lpc32xx_i2c_set_bus_speed,
|
|
CONFIG_SYS_I2C_LPC32XX_SPEED,
|
|
CONFIG_SYS_I2C_LPC32XX_SLAVE,
|
|
0)
|
|
|
|
U_BOOT_I2C_ADAP_COMPLETE(lpc32xx_1, _i2c_init, lpc32xx_i2c_probe,
|
|
lpc32xx_i2c_read, lpc32xx_i2c_write,
|
|
lpc32xx_i2c_set_bus_speed,
|
|
CONFIG_SYS_I2C_LPC32XX_SPEED,
|
|
CONFIG_SYS_I2C_LPC32XX_SLAVE,
|
|
1)
|
|
|