upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
367 lines
8.5 KiB
367 lines
8.5 KiB
/*
|
|
* Copyright (C) 2014-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <linux/types.h>
|
|
#include <linux/io.h>
|
|
#include <asm/errno.h>
|
|
#include <dm/device.h>
|
|
#include <dm/root.h>
|
|
#include <i2c.h>
|
|
#include <fdtdec.h>
|
|
#include <mapmem.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
struct uniphier_fi2c_regs {
|
|
u32 cr; /* control register */
|
|
#define I2C_CR_MST (1 << 3) /* master mode */
|
|
#define I2C_CR_STA (1 << 2) /* start condition */
|
|
#define I2C_CR_STO (1 << 1) /* stop condition */
|
|
#define I2C_CR_NACK (1 << 0) /* not ACK */
|
|
u32 dttx; /* send FIFO (write-only) */
|
|
#define dtrx dttx /* receive FIFO (read-only) */
|
|
#define I2C_DTTX_CMD (1 << 8) /* send command (slave addr) */
|
|
#define I2C_DTTX_RD (1 << 0) /* read */
|
|
u32 __reserved; /* no register at offset 0x08 */
|
|
u32 slad; /* slave address */
|
|
u32 cyc; /* clock cycle control */
|
|
u32 lctl; /* clock low period control */
|
|
u32 ssut; /* restart/stop setup time control */
|
|
u32 dsut; /* data setup time control */
|
|
u32 intr; /* interrupt status */
|
|
u32 ie; /* interrupt enable */
|
|
u32 ic; /* interrupt clear */
|
|
#define I2C_INT_TE (1 << 9) /* TX FIFO empty */
|
|
#define I2C_INT_RB (1 << 4) /* received specified bytes */
|
|
#define I2C_INT_NA (1 << 2) /* no answer */
|
|
#define I2C_INT_AL (1 << 1) /* arbitration lost */
|
|
u32 sr; /* status register */
|
|
#define I2C_SR_DB (1 << 12) /* device busy */
|
|
#define I2C_SR_BB (1 << 8) /* bus busy */
|
|
#define I2C_SR_RFF (1 << 3) /* Rx FIFO full */
|
|
#define I2C_SR_RNE (1 << 2) /* Rx FIFO not empty */
|
|
#define I2C_SR_TNF (1 << 1) /* Tx FIFO not full */
|
|
#define I2C_SR_TFE (1 << 0) /* Tx FIFO empty */
|
|
u32 __reserved2; /* no register at offset 0x30 */
|
|
u32 rst; /* reset control */
|
|
#define I2C_RST_TBRST (1 << 2) /* clear Tx FIFO */
|
|
#define I2C_RST_RBRST (1 << 1) /* clear Rx FIFO */
|
|
#define I2C_RST_RST (1 << 0) /* forcible bus reset */
|
|
u32 bm; /* bus monitor */
|
|
u32 noise; /* noise filter control */
|
|
u32 tbc; /* Tx byte count setting */
|
|
u32 rbc; /* Rx byte count setting */
|
|
u32 tbcm; /* Tx byte count monitor */
|
|
u32 rbcm; /* Rx byte count monitor */
|
|
u32 brst; /* bus reset */
|
|
#define I2C_BRST_FOEN (1 << 1) /* normal operation */
|
|
#define I2C_BRST_RSCLO (1 << 0) /* release SCL low fixing */
|
|
};
|
|
|
|
#define FIOCLK 50000000
|
|
|
|
struct uniphier_fi2c_dev {
|
|
struct uniphier_fi2c_regs __iomem *regs; /* register base */
|
|
unsigned long fioclk; /* internal operation clock */
|
|
unsigned long timeout; /* time out (us) */
|
|
};
|
|
|
|
static int poll_status(u32 __iomem *reg, u32 flag)
|
|
{
|
|
int wait = 1000000; /* 1 sec is long enough */
|
|
|
|
while (readl(reg) & flag) {
|
|
if (wait-- < 0)
|
|
return -EREMOTEIO;
|
|
udelay(1);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int reset_bus(struct uniphier_fi2c_regs __iomem *regs)
|
|
{
|
|
int ret;
|
|
|
|
/* bus forcible reset */
|
|
writel(I2C_RST_RST, ®s->rst);
|
|
ret = poll_status(®s->rst, I2C_RST_RST);
|
|
if (ret < 0)
|
|
debug("error: fail to reset I2C controller\n");
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int check_device_busy(struct uniphier_fi2c_regs __iomem *regs)
|
|
{
|
|
int ret;
|
|
|
|
ret = poll_status(®s->sr, I2C_SR_DB);
|
|
if (ret < 0) {
|
|
debug("error: device busy too long. reset...\n");
|
|
ret = reset_bus(regs);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int uniphier_fi2c_probe(struct udevice *dev)
|
|
{
|
|
fdt_addr_t addr;
|
|
fdt_size_t size;
|
|
struct uniphier_fi2c_dev *priv = dev_get_priv(dev);
|
|
int ret;
|
|
|
|
addr = fdtdec_get_addr_size(gd->fdt_blob, dev->of_offset, "reg",
|
|
&size);
|
|
|
|
priv->regs = map_sysmem(addr, size);
|
|
|
|
if (!priv->regs)
|
|
return -ENOMEM;
|
|
|
|
priv->fioclk = FIOCLK;
|
|
|
|
/* bus forcible reset */
|
|
ret = reset_bus(priv->regs);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
writel(I2C_BRST_FOEN | I2C_BRST_RSCLO, &priv->regs->brst);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int uniphier_fi2c_remove(struct udevice *dev)
|
|
{
|
|
struct uniphier_fi2c_dev *priv = dev_get_priv(dev);
|
|
|
|
unmap_sysmem(priv->regs);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wait_for_irq(struct uniphier_fi2c_dev *dev, u32 flags,
|
|
bool *stop)
|
|
{
|
|
u32 irq;
|
|
unsigned long wait = dev->timeout;
|
|
int ret = -EREMOTEIO;
|
|
|
|
do {
|
|
udelay(1);
|
|
irq = readl(&dev->regs->intr);
|
|
} while (!(irq & flags) && wait--);
|
|
|
|
if (wait < 0) {
|
|
debug("error: time out\n");
|
|
return ret;
|
|
}
|
|
|
|
if (irq & I2C_INT_AL) {
|
|
debug("error: arbitration lost\n");
|
|
*stop = false;
|
|
return ret;
|
|
}
|
|
|
|
if (irq & I2C_INT_NA) {
|
|
debug("error: no answer\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int issue_stop(struct uniphier_fi2c_dev *dev, int old_ret)
|
|
{
|
|
int ret;
|
|
|
|
debug("stop condition\n");
|
|
writel(I2C_CR_MST | I2C_CR_STO, &dev->regs->cr);
|
|
|
|
ret = poll_status(&dev->regs->sr, I2C_SR_DB);
|
|
if (ret < 0)
|
|
debug("error: device busy after operation\n");
|
|
|
|
return old_ret ? old_ret : ret;
|
|
}
|
|
|
|
static int uniphier_fi2c_transmit(struct uniphier_fi2c_dev *dev, uint addr,
|
|
uint len, const u8 *buf, bool *stop)
|
|
{
|
|
int ret;
|
|
const u32 irq_flags = I2C_INT_TE | I2C_INT_NA | I2C_INT_AL;
|
|
struct uniphier_fi2c_regs __iomem *regs = dev->regs;
|
|
|
|
debug("%s: addr = %x, len = %d\n", __func__, addr, len);
|
|
|
|
writel(I2C_DTTX_CMD | addr << 1, ®s->dttx);
|
|
|
|
writel(irq_flags, ®s->ie);
|
|
writel(irq_flags, ®s->ic);
|
|
|
|
debug("start condition\n");
|
|
writel(I2C_CR_MST | I2C_CR_STA, ®s->cr);
|
|
|
|
ret = wait_for_irq(dev, irq_flags, stop);
|
|
if (ret < 0)
|
|
goto error;
|
|
|
|
while (len--) {
|
|
debug("sending %x\n", *buf);
|
|
writel(*buf++, ®s->dttx);
|
|
|
|
writel(irq_flags, ®s->ic);
|
|
|
|
ret = wait_for_irq(dev, irq_flags, stop);
|
|
if (ret < 0)
|
|
goto error;
|
|
}
|
|
|
|
error:
|
|
writel(irq_flags, ®s->ic);
|
|
|
|
if (*stop)
|
|
ret = issue_stop(dev, ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int uniphier_fi2c_receive(struct uniphier_fi2c_dev *dev, uint addr,
|
|
uint len, u8 *buf, bool *stop)
|
|
{
|
|
int ret = 0;
|
|
const u32 irq_flags = I2C_INT_RB | I2C_INT_NA | I2C_INT_AL;
|
|
struct uniphier_fi2c_regs __iomem *regs = dev->regs;
|
|
|
|
debug("%s: addr = %x, len = %d\n", __func__, addr, len);
|
|
|
|
/*
|
|
* In case 'len == 0', only the slave address should be sent
|
|
* for probing, which is covered by the transmit function.
|
|
*/
|
|
if (len == 0)
|
|
return uniphier_fi2c_transmit(dev, addr, len, buf, stop);
|
|
|
|
writel(I2C_DTTX_CMD | I2C_DTTX_RD | addr << 1, ®s->dttx);
|
|
|
|
writel(0, ®s->rbc);
|
|
writel(irq_flags, ®s->ie);
|
|
writel(irq_flags, ®s->ic);
|
|
|
|
debug("start condition\n");
|
|
writel(I2C_CR_MST | I2C_CR_STA | (len == 1 ? I2C_CR_NACK : 0),
|
|
®s->cr);
|
|
|
|
while (len--) {
|
|
ret = wait_for_irq(dev, irq_flags, stop);
|
|
if (ret < 0)
|
|
goto error;
|
|
|
|
*buf++ = readl(®s->dtrx);
|
|
debug("received %x\n", *(buf - 1));
|
|
|
|
if (len == 1)
|
|
writel(I2C_CR_MST | I2C_CR_NACK, ®s->cr);
|
|
|
|
writel(irq_flags, ®s->ic);
|
|
}
|
|
|
|
error:
|
|
writel(irq_flags, ®s->ic);
|
|
|
|
if (*stop)
|
|
ret = issue_stop(dev, ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int uniphier_fi2c_xfer(struct udevice *bus, struct i2c_msg *msg,
|
|
int nmsgs)
|
|
{
|
|
int ret;
|
|
struct uniphier_fi2c_dev *dev = dev_get_priv(bus);
|
|
bool stop;
|
|
|
|
ret = check_device_busy(dev->regs);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
for (; nmsgs > 0; nmsgs--, msg++) {
|
|
/* If next message is read, skip the stop condition */
|
|
stop = nmsgs > 1 && msg[1].flags & I2C_M_RD ? false : true;
|
|
|
|
if (msg->flags & I2C_M_RD)
|
|
ret = uniphier_fi2c_receive(dev, msg->addr, msg->len,
|
|
msg->buf, &stop);
|
|
else
|
|
ret = uniphier_fi2c_transmit(dev, msg->addr, msg->len,
|
|
msg->buf, &stop);
|
|
|
|
if (ret < 0)
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int uniphier_fi2c_set_bus_speed(struct udevice *bus, unsigned int speed)
|
|
{
|
|
int ret;
|
|
unsigned int clk_count;
|
|
struct uniphier_fi2c_dev *dev = dev_get_priv(bus);
|
|
struct uniphier_fi2c_regs __iomem *regs = dev->regs;
|
|
|
|
/* max supported frequency is 400 kHz */
|
|
if (speed > 400000)
|
|
return -EINVAL;
|
|
|
|
ret = check_device_busy(dev->regs);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* make sure the bus is idle when changing the frequency */
|
|
writel(I2C_BRST_RSCLO, ®s->brst);
|
|
|
|
clk_count = dev->fioclk / speed;
|
|
|
|
writel(clk_count, ®s->cyc);
|
|
writel(clk_count / 2, ®s->lctl);
|
|
writel(clk_count / 2, ®s->ssut);
|
|
writel(clk_count / 16, ®s->dsut);
|
|
|
|
writel(I2C_BRST_FOEN | I2C_BRST_RSCLO, ®s->brst);
|
|
|
|
/*
|
|
* Theoretically, each byte can be transferred in
|
|
* 1000000 * 9 / speed usec.
|
|
* This time out value is long enough.
|
|
*/
|
|
dev->timeout = 100000000L / speed;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dm_i2c_ops uniphier_fi2c_ops = {
|
|
.xfer = uniphier_fi2c_xfer,
|
|
.set_bus_speed = uniphier_fi2c_set_bus_speed,
|
|
};
|
|
|
|
static const struct udevice_id uniphier_fi2c_of_match[] = {
|
|
{ .compatible = "socionext,uniphier-fi2c" },
|
|
{ /* sentinel */ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(uniphier_fi2c) = {
|
|
.name = "uniphier-fi2c",
|
|
.id = UCLASS_I2C,
|
|
.of_match = uniphier_fi2c_of_match,
|
|
.probe = uniphier_fi2c_probe,
|
|
.remove = uniphier_fi2c_remove,
|
|
.priv_auto_alloc_size = sizeof(struct uniphier_fi2c_dev),
|
|
.ops = &uniphier_fi2c_ops,
|
|
};
|
|
|