upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
436 lines
11 KiB
436 lines
11 KiB
/*
|
|
* Copyright (C) Marvell International Ltd. and its affiliates
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <i2c.h>
|
|
#include <spl.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/cpu.h>
|
|
#include <asm/arch/soc.h>
|
|
|
|
#include "xor.h"
|
|
#include "xor_regs.h"
|
|
|
|
static u32 xor_regs_ctrl_backup;
|
|
static u32 xor_regs_base_backup[MAX_CS];
|
|
static u32 xor_regs_mask_backup[MAX_CS];
|
|
|
|
static void mv_xor_hal_init(u32 chan_num);
|
|
static int mv_xor_cmd_set(u32 chan, int command);
|
|
static int mv_xor_ctrl_set(u32 chan, u32 xor_ctrl);
|
|
|
|
void mv_sys_xor_init(MV_DRAM_INFO *dram_info)
|
|
{
|
|
u32 reg, ui, base, cs_count;
|
|
|
|
xor_regs_ctrl_backup = reg_read(XOR_WINDOW_CTRL_REG(0, 0));
|
|
for (ui = 0; ui < MAX_CS; ui++)
|
|
xor_regs_base_backup[ui] = reg_read(XOR_BASE_ADDR_REG(0, ui));
|
|
for (ui = 0; ui < MAX_CS; ui++)
|
|
xor_regs_mask_backup[ui] = reg_read(XOR_SIZE_MASK_REG(0, ui));
|
|
|
|
reg = 0;
|
|
for (ui = 0; ui < (dram_info->num_cs + 1); ui++) {
|
|
/* Enable Window x for each CS */
|
|
reg |= (0x1 << (ui));
|
|
/* Enable Window x for each CS */
|
|
reg |= (0x3 << ((ui * 2) + 16));
|
|
}
|
|
|
|
reg_write(XOR_WINDOW_CTRL_REG(0, 0), reg);
|
|
|
|
/* Last window - Base - 0x40000000, Attribute 0x1E - SRAM */
|
|
base = (SRAM_BASE & 0xFFFF0000) | 0x1E00;
|
|
reg_write(XOR_BASE_ADDR_REG(0, dram_info->num_cs), base);
|
|
/* Last window - Size - 64 MB */
|
|
reg_write(XOR_SIZE_MASK_REG(0, dram_info->num_cs), 0x03FF0000);
|
|
|
|
cs_count = 0;
|
|
for (ui = 0; ui < MAX_CS; ui++) {
|
|
if (dram_info->cs_ena & (1 << ui)) {
|
|
/*
|
|
* Window x - Base - 0x00000000, Attribute 0x0E - DRAM
|
|
*/
|
|
base = 0;
|
|
switch (ui) {
|
|
case 0:
|
|
base |= 0xE00;
|
|
break;
|
|
case 1:
|
|
base |= 0xD00;
|
|
break;
|
|
case 2:
|
|
base |= 0xB00;
|
|
break;
|
|
case 3:
|
|
base |= 0x700;
|
|
break;
|
|
}
|
|
|
|
reg_write(XOR_BASE_ADDR_REG(0, cs_count), base);
|
|
|
|
/* Window x - Size - 256 MB */
|
|
reg_write(XOR_SIZE_MASK_REG(0, cs_count), 0x0FFF0000);
|
|
cs_count++;
|
|
}
|
|
}
|
|
|
|
mv_xor_hal_init(1);
|
|
|
|
return;
|
|
}
|
|
|
|
void mv_sys_xor_finish(void)
|
|
{
|
|
u32 ui;
|
|
|
|
reg_write(XOR_WINDOW_CTRL_REG(0, 0), xor_regs_ctrl_backup);
|
|
for (ui = 0; ui < MAX_CS; ui++)
|
|
reg_write(XOR_BASE_ADDR_REG(0, ui), xor_regs_base_backup[ui]);
|
|
for (ui = 0; ui < MAX_CS; ui++)
|
|
reg_write(XOR_SIZE_MASK_REG(0, ui), xor_regs_mask_backup[ui]);
|
|
|
|
reg_write(XOR_ADDR_OVRD_REG(0, 0), 0);
|
|
}
|
|
|
|
/*
|
|
* mv_xor_hal_init - Initialize XOR engine
|
|
*
|
|
* DESCRIPTION:
|
|
* This function initialize XOR unit.
|
|
* INPUT:
|
|
* None.
|
|
*
|
|
* OUTPUT:
|
|
* None.
|
|
*
|
|
* RETURN:
|
|
* MV_BAD_PARAM if parameters to function invalid, MV_OK otherwise.
|
|
*/
|
|
static void mv_xor_hal_init(u32 chan_num)
|
|
{
|
|
u32 i;
|
|
|
|
/* Abort any XOR activity & set default configuration */
|
|
for (i = 0; i < chan_num; i++) {
|
|
mv_xor_cmd_set(i, MV_STOP);
|
|
mv_xor_ctrl_set(i, (1 << XEXCR_REG_ACC_PROTECT_OFFS) |
|
|
(4 << XEXCR_DST_BURST_LIMIT_OFFS) |
|
|
(4 << XEXCR_SRC_BURST_LIMIT_OFFS));
|
|
}
|
|
}
|
|
|
|
/*
|
|
* mv_xor_ctrl_set - Set XOR channel control registers
|
|
*
|
|
* DESCRIPTION:
|
|
*
|
|
* INPUT:
|
|
*
|
|
* OUTPUT:
|
|
* None.
|
|
*
|
|
* RETURN:
|
|
* MV_BAD_PARAM if parameters to function invalid, MV_OK otherwise.
|
|
* NOTE:
|
|
* This function does not modify the OperationMode field of control register.
|
|
*
|
|
*/
|
|
static int mv_xor_ctrl_set(u32 chan, u32 xor_ctrl)
|
|
{
|
|
u32 val;
|
|
|
|
/* Update the XOR Engine [0..1] Configuration Registers (XExCR) */
|
|
val = reg_read(XOR_CONFIG_REG(XOR_UNIT(chan), XOR_CHAN(chan)))
|
|
& XEXCR_OPERATION_MODE_MASK;
|
|
xor_ctrl &= ~XEXCR_OPERATION_MODE_MASK;
|
|
xor_ctrl |= val;
|
|
reg_write(XOR_CONFIG_REG(XOR_UNIT(chan), XOR_CHAN(chan)), xor_ctrl);
|
|
|
|
return MV_OK;
|
|
}
|
|
|
|
int mv_xor_mem_init(u32 chan, u32 start_ptr, u32 block_size, u32 init_val_high,
|
|
u32 init_val_low)
|
|
{
|
|
u32 tmp;
|
|
|
|
/* Parameter checking */
|
|
if (chan >= MV_XOR_MAX_CHAN)
|
|
return MV_BAD_PARAM;
|
|
|
|
if (MV_ACTIVE == mv_xor_state_get(chan))
|
|
return MV_BUSY;
|
|
|
|
if ((block_size < XEXBSR_BLOCK_SIZE_MIN_VALUE) ||
|
|
(block_size > XEXBSR_BLOCK_SIZE_MAX_VALUE))
|
|
return MV_BAD_PARAM;
|
|
|
|
/* Set the operation mode to Memory Init */
|
|
tmp = reg_read(XOR_CONFIG_REG(XOR_UNIT(chan), XOR_CHAN(chan)));
|
|
tmp &= ~XEXCR_OPERATION_MODE_MASK;
|
|
tmp |= XEXCR_OPERATION_MODE_MEM_INIT;
|
|
reg_write(XOR_CONFIG_REG(XOR_UNIT(chan), XOR_CHAN(chan)), tmp);
|
|
|
|
/*
|
|
* Update the start_ptr field in XOR Engine [0..1] Destination Pointer
|
|
* Register (XExDPR0)
|
|
*/
|
|
reg_write(XOR_DST_PTR_REG(XOR_UNIT(chan), XOR_CHAN(chan)), start_ptr);
|
|
|
|
/*
|
|
* Update the BlockSize field in the XOR Engine[0..1] Block Size
|
|
* Registers (XExBSR)
|
|
*/
|
|
reg_write(XOR_BLOCK_SIZE_REG(XOR_UNIT(chan), XOR_CHAN(chan)),
|
|
block_size);
|
|
|
|
/*
|
|
* Update the field InitValL in the XOR Engine Initial Value Register
|
|
* Low (XEIVRL)
|
|
*/
|
|
reg_write(XOR_INIT_VAL_LOW_REG(XOR_UNIT(chan)), init_val_low);
|
|
|
|
/*
|
|
* Update the field InitValH in the XOR Engine Initial Value Register
|
|
* High (XEIVRH)
|
|
*/
|
|
reg_write(XOR_INIT_VAL_HIGH_REG(XOR_UNIT(chan)), init_val_high);
|
|
|
|
/* Start transfer */
|
|
reg_bit_set(XOR_ACTIVATION_REG(XOR_UNIT(chan), XOR_CHAN(chan)),
|
|
XEXACTR_XESTART_MASK);
|
|
|
|
return MV_OK;
|
|
}
|
|
|
|
/*
|
|
* mv_xor_transfer - Transfer data from source to destination on one of
|
|
* three modes (XOR,CRC32,DMA)
|
|
*
|
|
* DESCRIPTION:
|
|
* This function initiates XOR channel, according to function parameters,
|
|
* in order to perform XOR or CRC32 or DMA transaction.
|
|
* To gain maximum performance the user is asked to keep the following
|
|
* restrictions:
|
|
* 1) Selected engine is available (not busy).
|
|
* 1) This module does not take into consideration CPU MMU issues.
|
|
* In order for the XOR engine to access the appropreate source
|
|
* and destination, address parameters must be given in system
|
|
* physical mode.
|
|
* 2) This API does not take care of cache coherency issues. The source,
|
|
* destination and in case of chain the descriptor list are assumed
|
|
* to be cache coherent.
|
|
* 4) Parameters validity. For example, does size parameter exceeds
|
|
* maximum byte count of descriptor mode (16M or 64K).
|
|
*
|
|
* INPUT:
|
|
* chan - XOR channel number. See MV_XOR_CHANNEL enumerator.
|
|
* xor_type - One of three: XOR, CRC32 and DMA operations.
|
|
* xor_chain_ptr - address of chain pointer
|
|
*
|
|
* OUTPUT:
|
|
* None.
|
|
*
|
|
* RETURS:
|
|
* MV_BAD_PARAM if parameters to function invalid, MV_OK otherwise.
|
|
*
|
|
*/
|
|
int mv_xor_transfer(u32 chan, int xor_type, u32 xor_chain_ptr)
|
|
{
|
|
u32 tmp;
|
|
|
|
/* Parameter checking */
|
|
if (chan >= MV_XOR_MAX_CHAN) {
|
|
debug("%s: ERR. Invalid chan num %d\n", __func__, chan);
|
|
return MV_BAD_PARAM;
|
|
}
|
|
|
|
if (MV_ACTIVE == mv_xor_state_get(chan)) {
|
|
debug("%s: ERR. Channel is already active\n", __func__);
|
|
return MV_BUSY;
|
|
}
|
|
|
|
if (0x0 == xor_chain_ptr) {
|
|
debug("%s: ERR. xor_chain_ptr is NULL pointer\n", __func__);
|
|
return MV_BAD_PARAM;
|
|
}
|
|
|
|
/* Read configuration register and mask the operation mode field */
|
|
tmp = reg_read(XOR_CONFIG_REG(XOR_UNIT(chan), XOR_CHAN(chan)));
|
|
tmp &= ~XEXCR_OPERATION_MODE_MASK;
|
|
|
|
switch (xor_type) {
|
|
case MV_XOR:
|
|
if (0 != (xor_chain_ptr & XEXDPR_DST_PTR_XOR_MASK)) {
|
|
debug("%s: ERR. Invalid chain pointer (bits [5:0] must be cleared)\n",
|
|
__func__);
|
|
return MV_BAD_PARAM;
|
|
}
|
|
|
|
/* Set the operation mode to XOR */
|
|
tmp |= XEXCR_OPERATION_MODE_XOR;
|
|
break;
|
|
|
|
case MV_DMA:
|
|
if (0 != (xor_chain_ptr & XEXDPR_DST_PTR_DMA_MASK)) {
|
|
debug("%s: ERR. Invalid chain pointer (bits [4:0] must be cleared)\n",
|
|
__func__);
|
|
return MV_BAD_PARAM;
|
|
}
|
|
|
|
/* Set the operation mode to DMA */
|
|
tmp |= XEXCR_OPERATION_MODE_DMA;
|
|
break;
|
|
|
|
case MV_CRC32:
|
|
if (0 != (xor_chain_ptr & XEXDPR_DST_PTR_CRC_MASK)) {
|
|
debug("%s: ERR. Invalid chain pointer (bits [4:0] must be cleared)\n",
|
|
__func__);
|
|
return MV_BAD_PARAM;
|
|
}
|
|
|
|
/* Set the operation mode to CRC32 */
|
|
tmp |= XEXCR_OPERATION_MODE_CRC;
|
|
break;
|
|
|
|
default:
|
|
return MV_BAD_PARAM;
|
|
}
|
|
|
|
/* Write the operation mode to the register */
|
|
reg_write(XOR_CONFIG_REG(XOR_UNIT(chan), XOR_CHAN(chan)), tmp);
|
|
|
|
/*
|
|
* Update the NextDescPtr field in the XOR Engine [0..1] Next Descriptor
|
|
* Pointer Register (XExNDPR)
|
|
*/
|
|
reg_write(XOR_NEXT_DESC_PTR_REG(XOR_UNIT(chan), XOR_CHAN(chan)),
|
|
xor_chain_ptr);
|
|
|
|
/* Start transfer */
|
|
reg_bit_set(XOR_ACTIVATION_REG(XOR_UNIT(chan), XOR_CHAN(chan)),
|
|
XEXACTR_XESTART_MASK);
|
|
|
|
return MV_OK;
|
|
}
|
|
|
|
/*
|
|
* mv_xor_state_get - Get XOR channel state.
|
|
*
|
|
* DESCRIPTION:
|
|
* XOR channel activity state can be active, idle, paused.
|
|
* This function retrunes the channel activity state.
|
|
*
|
|
* INPUT:
|
|
* chan - the channel number
|
|
*
|
|
* OUTPUT:
|
|
* None.
|
|
*
|
|
* RETURN:
|
|
* XOR_CHANNEL_IDLE - If the engine is idle.
|
|
* XOR_CHANNEL_ACTIVE - If the engine is busy.
|
|
* XOR_CHANNEL_PAUSED - If the engine is paused.
|
|
* MV_UNDEFINED_STATE - If the engine state is undefind or there is no
|
|
* such engine
|
|
*
|
|
*/
|
|
int mv_xor_state_get(u32 chan)
|
|
{
|
|
u32 state;
|
|
|
|
/* Parameter checking */
|
|
if (chan >= MV_XOR_MAX_CHAN) {
|
|
debug("%s: ERR. Invalid chan num %d\n", __func__, chan);
|
|
return MV_UNDEFINED_STATE;
|
|
}
|
|
|
|
/* Read the current state */
|
|
state = reg_read(XOR_ACTIVATION_REG(XOR_UNIT(chan), XOR_CHAN(chan)));
|
|
state &= XEXACTR_XESTATUS_MASK;
|
|
|
|
/* Return the state */
|
|
switch (state) {
|
|
case XEXACTR_XESTATUS_IDLE:
|
|
return MV_IDLE;
|
|
case XEXACTR_XESTATUS_ACTIVE:
|
|
return MV_ACTIVE;
|
|
case XEXACTR_XESTATUS_PAUSED:
|
|
return MV_PAUSED;
|
|
}
|
|
|
|
return MV_UNDEFINED_STATE;
|
|
}
|
|
|
|
/*
|
|
* mv_xor_cmd_set - Set command of XOR channel
|
|
*
|
|
* DESCRIPTION:
|
|
* XOR channel can be started, idle, paused and restarted.
|
|
* Paused can be set only if channel is active.
|
|
* Start can be set only if channel is idle or paused.
|
|
* Restart can be set only if channel is paused.
|
|
* Stop can be set only if channel is active.
|
|
*
|
|
* INPUT:
|
|
* chan - The channel number
|
|
* command - The command type (start, stop, restart, pause)
|
|
*
|
|
* OUTPUT:
|
|
* None.
|
|
*
|
|
* RETURN:
|
|
* MV_OK on success , MV_BAD_PARAM on erroneous parameter, MV_ERROR on
|
|
* undefind XOR engine mode
|
|
*
|
|
*/
|
|
static int mv_xor_cmd_set(u32 chan, int command)
|
|
{
|
|
int state;
|
|
|
|
/* Parameter checking */
|
|
if (chan >= MV_XOR_MAX_CHAN) {
|
|
debug("%s: ERR. Invalid chan num %d\n", __func__, chan);
|
|
return MV_BAD_PARAM;
|
|
}
|
|
|
|
/* Get the current state */
|
|
state = mv_xor_state_get(chan);
|
|
|
|
/* Command is start and current state is idle */
|
|
if ((command == MV_START) && (state == MV_IDLE)) {
|
|
reg_bit_set(XOR_ACTIVATION_REG(XOR_UNIT(chan), XOR_CHAN(chan)),
|
|
XEXACTR_XESTART_MASK);
|
|
return MV_OK;
|
|
}
|
|
/* Command is stop and current state is active */
|
|
else if ((command == MV_STOP) && (state == MV_ACTIVE)) {
|
|
reg_bit_set(XOR_ACTIVATION_REG(XOR_UNIT(chan), XOR_CHAN(chan)),
|
|
XEXACTR_XESTOP_MASK);
|
|
return MV_OK;
|
|
}
|
|
/* Command is paused and current state is active */
|
|
else if ((command == MV_PAUSED) && (state == MV_ACTIVE)) {
|
|
reg_bit_set(XOR_ACTIVATION_REG(XOR_UNIT(chan), XOR_CHAN(chan)),
|
|
XEXACTR_XEPAUSE_MASK);
|
|
return MV_OK;
|
|
}
|
|
/* Command is restart and current state is paused */
|
|
else if ((command == MV_RESTART) && (state == MV_PAUSED)) {
|
|
reg_bit_set(XOR_ACTIVATION_REG(XOR_UNIT(chan), XOR_CHAN(chan)),
|
|
XEXACTR_XERESTART_MASK);
|
|
return MV_OK;
|
|
}
|
|
/* Command is stop and current state is active */
|
|
else if ((command == MV_STOP) && (state == MV_IDLE))
|
|
return MV_OK;
|
|
|
|
/* Illegal command */
|
|
debug("%s: ERR. Illegal command\n", __func__);
|
|
|
|
return MV_BAD_PARAM;
|
|
}
|
|
|