upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
406 lines
14 KiB
406 lines
14 KiB
/*
|
|
* Copyright © 2008 Keith Packard
|
|
*
|
|
* Permission to use, copy, modify, distribute, and sell this software and its
|
|
* documentation for any purpose is hereby granted without fee, provided that
|
|
* the above copyright notice appear in all copies and that both that copyright
|
|
* notice and this permission notice appear in supporting documentation, and
|
|
* that the name of the copyright holders not be used in advertising or
|
|
* publicity pertaining to distribution of the software without specific,
|
|
* written prior permission. The copyright holders make no representations
|
|
* about the suitability of this software for any purpose. It is provided "as
|
|
* is" without express or implied warranty.
|
|
*
|
|
* THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
|
|
* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
|
|
* EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
|
|
* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
|
|
* DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
|
|
* TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
|
|
* OF THIS SOFTWARE.
|
|
*/
|
|
|
|
#ifndef _DRM_DP_HELPER_H_
|
|
#define _DRM_DP_HELPER_H_
|
|
|
|
/*
|
|
* Unless otherwise noted, all values are from the DP 1.1a spec. Note that
|
|
* DP and DPCD versions are independent. Differences from 1.0 are not noted,
|
|
* 1.0 devices basically don't exist in the wild.
|
|
*
|
|
* Abbreviations, in chronological order:
|
|
*
|
|
* eDP: Embedded DisplayPort version 1
|
|
* DPI: DisplayPort Interoperability Guideline v1.1a
|
|
* 1.2: DisplayPort 1.2
|
|
* MST: Multistream Transport - part of DP 1.2a
|
|
*
|
|
* 1.2 formally includes both eDP and DPI definitions.
|
|
*/
|
|
|
|
#define DP_AUX_I2C_WRITE 0x0
|
|
#define DP_AUX_I2C_READ 0x1
|
|
#define DP_AUX_I2C_STATUS 0x2
|
|
#define DP_AUX_I2C_MOT 0x4
|
|
#define DP_AUX_NATIVE_WRITE 0x8
|
|
#define DP_AUX_NATIVE_READ 0x9
|
|
|
|
#define DP_AUX_NATIVE_REPLY_ACK (0x0 << 0)
|
|
#define DP_AUX_NATIVE_REPLY_NACK (0x1 << 0)
|
|
#define DP_AUX_NATIVE_REPLY_DEFER (0x2 << 0)
|
|
#define DP_AUX_NATIVE_REPLY_MASK (0x3 << 0)
|
|
|
|
#define DP_AUX_I2C_REPLY_ACK (0x0 << 2)
|
|
#define DP_AUX_I2C_REPLY_NACK (0x1 << 2)
|
|
#define DP_AUX_I2C_REPLY_DEFER (0x2 << 2)
|
|
#define DP_AUX_I2C_REPLY_MASK (0x3 << 2)
|
|
|
|
/* AUX CH addresses */
|
|
/* DPCD */
|
|
#define DP_DPCD_REV 0x000
|
|
|
|
#define DP_MAX_LINK_RATE 0x001
|
|
|
|
#define DP_MAX_LANE_COUNT 0x002
|
|
# define DP_MAX_LANE_COUNT_MASK 0x1f
|
|
# define DP_TPS3_SUPPORTED (1 << 6) /* 1.2 */
|
|
# define DP_ENHANCED_FRAME_CAP (1 << 7)
|
|
|
|
#define DP_MAX_DOWNSPREAD 0x003
|
|
# define DP_NO_AUX_HANDSHAKE_LINK_TRAINING (1 << 6)
|
|
|
|
#define DP_NORP 0x004
|
|
|
|
#define DP_DOWNSTREAMPORT_PRESENT 0x005
|
|
# define DP_DWN_STRM_PORT_PRESENT (1 << 0)
|
|
# define DP_DWN_STRM_PORT_TYPE_MASK 0x06
|
|
# define DP_DWN_STRM_PORT_TYPE_DP (0 << 1)
|
|
# define DP_DWN_STRM_PORT_TYPE_ANALOG (1 << 1)
|
|
# define DP_DWN_STRM_PORT_TYPE_TMDS (2 << 1)
|
|
# define DP_DWN_STRM_PORT_TYPE_OTHER (3 << 1)
|
|
# define DP_FORMAT_CONVERSION (1 << 3)
|
|
# define DP_DETAILED_CAP_INFO_AVAILABLE (1 << 4) /* DPI */
|
|
|
|
#define DP_MAIN_LINK_CHANNEL_CODING 0x006
|
|
|
|
#define DP_DOWN_STREAM_PORT_COUNT 0x007
|
|
# define DP_PORT_COUNT_MASK 0x0f
|
|
# define DP_MSA_TIMING_PAR_IGNORED (1 << 6) /* eDP */
|
|
# define DP_OUI_SUPPORT (1 << 7)
|
|
|
|
#define DP_I2C_SPEED_CAP 0x00c /* DPI */
|
|
# define DP_I2C_SPEED_1K 0x01
|
|
# define DP_I2C_SPEED_5K 0x02
|
|
# define DP_I2C_SPEED_10K 0x04
|
|
# define DP_I2C_SPEED_100K 0x08
|
|
# define DP_I2C_SPEED_400K 0x10
|
|
# define DP_I2C_SPEED_1M 0x20
|
|
|
|
#define DP_EDP_CONFIGURATION_CAP 0x00d /* XXX 1.2? */
|
|
#define DP_TRAINING_AUX_RD_INTERVAL 0x00e /* XXX 1.2? */
|
|
|
|
/* Multiple stream transport */
|
|
#define DP_FAUX_CAP 0x020 /* 1.2 */
|
|
# define DP_FAUX_CAP_1 (1 << 0)
|
|
|
|
#define DP_MSTM_CAP 0x021 /* 1.2 */
|
|
# define DP_MST_CAP (1 << 0)
|
|
|
|
#define DP_GUID 0x030 /* 1.2 */
|
|
|
|
#define DP_PSR_SUPPORT 0x070 /* XXX 1.2? */
|
|
# define DP_PSR_IS_SUPPORTED 1
|
|
#define DP_PSR_CAPS 0x071 /* XXX 1.2? */
|
|
# define DP_PSR_NO_TRAIN_ON_EXIT 1
|
|
# define DP_PSR_SETUP_TIME_330 (0 << 1)
|
|
# define DP_PSR_SETUP_TIME_275 (1 << 1)
|
|
# define DP_PSR_SETUP_TIME_220 (2 << 1)
|
|
# define DP_PSR_SETUP_TIME_165 (3 << 1)
|
|
# define DP_PSR_SETUP_TIME_110 (4 << 1)
|
|
# define DP_PSR_SETUP_TIME_55 (5 << 1)
|
|
# define DP_PSR_SETUP_TIME_0 (6 << 1)
|
|
# define DP_PSR_SETUP_TIME_MASK (7 << 1)
|
|
# define DP_PSR_SETUP_TIME_SHIFT 1
|
|
|
|
/*
|
|
* 0x80-0x8f describe downstream port capabilities, but there are two layouts
|
|
* based on whether DP_DETAILED_CAP_INFO_AVAILABLE was set. If it was not,
|
|
* each port's descriptor is one byte wide. If it was set, each port's is
|
|
* four bytes wide, starting with the one byte from the base info. As of
|
|
* DP interop v1.1a only VGA defines additional detail.
|
|
*/
|
|
|
|
/* offset 0 */
|
|
#define DP_DOWNSTREAM_PORT_0 0x80
|
|
# define DP_DS_PORT_TYPE_MASK (7 << 0)
|
|
# define DP_DS_PORT_TYPE_DP 0
|
|
# define DP_DS_PORT_TYPE_VGA 1
|
|
# define DP_DS_PORT_TYPE_DVI 2
|
|
# define DP_DS_PORT_TYPE_HDMI 3
|
|
# define DP_DS_PORT_TYPE_NON_EDID 4
|
|
# define DP_DS_PORT_HPD (1 << 3)
|
|
/* offset 1 for VGA is maximum megapixels per second / 8 */
|
|
/* offset 2 */
|
|
# define DP_DS_VGA_MAX_BPC_MASK (3 << 0)
|
|
# define DP_DS_VGA_8BPC 0
|
|
# define DP_DS_VGA_10BPC 1
|
|
# define DP_DS_VGA_12BPC 2
|
|
# define DP_DS_VGA_16BPC 3
|
|
|
|
/* link configuration */
|
|
#define DP_LINK_BW_SET 0x100
|
|
# define DP_LINK_BW_1_62 0x06
|
|
# define DP_LINK_BW_2_7 0x0a
|
|
# define DP_LINK_BW_5_4 0x14 /* 1.2 */
|
|
|
|
#define DP_LANE_COUNT_SET 0x101
|
|
# define DP_LANE_COUNT_MASK 0x0f
|
|
# define DP_LANE_COUNT_ENHANCED_FRAME_EN (1 << 7)
|
|
|
|
#define DP_TRAINING_PATTERN_SET 0x102
|
|
# define DP_TRAINING_PATTERN_DISABLE 0
|
|
# define DP_TRAINING_PATTERN_1 1
|
|
# define DP_TRAINING_PATTERN_2 2
|
|
# define DP_TRAINING_PATTERN_3 3 /* 1.2 */
|
|
# define DP_TRAINING_PATTERN_MASK 0x3
|
|
|
|
# define DP_LINK_QUAL_PATTERN_DISABLE (0 << 2)
|
|
# define DP_LINK_QUAL_PATTERN_D10_2 (1 << 2)
|
|
# define DP_LINK_QUAL_PATTERN_ERROR_RATE (2 << 2)
|
|
# define DP_LINK_QUAL_PATTERN_PRBS7 (3 << 2)
|
|
# define DP_LINK_QUAL_PATTERN_MASK (3 << 2)
|
|
|
|
# define DP_RECOVERED_CLOCK_OUT_EN (1 << 4)
|
|
# define DP_LINK_SCRAMBLING_DISABLE (1 << 5)
|
|
|
|
# define DP_SYMBOL_ERROR_COUNT_BOTH (0 << 6)
|
|
# define DP_SYMBOL_ERROR_COUNT_DISPARITY (1 << 6)
|
|
# define DP_SYMBOL_ERROR_COUNT_SYMBOL (2 << 6)
|
|
# define DP_SYMBOL_ERROR_COUNT_MASK (3 << 6)
|
|
|
|
#define DP_TRAINING_LANE0_SET 0x103
|
|
#define DP_TRAINING_LANE1_SET 0x104
|
|
#define DP_TRAINING_LANE2_SET 0x105
|
|
#define DP_TRAINING_LANE3_SET 0x106
|
|
|
|
# define DP_TRAIN_VOLTAGE_SWING_MASK 0x3
|
|
# define DP_TRAIN_VOLTAGE_SWING_SHIFT 0
|
|
# define DP_TRAIN_MAX_SWING_REACHED (1 << 2)
|
|
# define DP_TRAIN_VOLTAGE_SWING_LEVEL_0 (0 << 0)
|
|
# define DP_TRAIN_VOLTAGE_SWING_LEVEL_1 (1 << 0)
|
|
# define DP_TRAIN_VOLTAGE_SWING_LEVEL_2 (2 << 0)
|
|
# define DP_TRAIN_VOLTAGE_SWING_LEVEL_3 (3 << 0)
|
|
|
|
# define DP_TRAIN_PRE_EMPHASIS_MASK (3 << 3)
|
|
# define DP_TRAIN_PRE_EMPH_LEVEL_0 (0 << 3)
|
|
# define DP_TRAIN_PRE_EMPH_LEVEL_1 (1 << 3)
|
|
# define DP_TRAIN_PRE_EMPH_LEVEL_2 (2 << 3)
|
|
# define DP_TRAIN_PRE_EMPH_LEVEL_3 (3 << 3)
|
|
|
|
# define DP_TRAIN_PRE_EMPHASIS_SHIFT 3
|
|
# define DP_TRAIN_MAX_PRE_EMPHASIS_REACHED (1 << 5)
|
|
|
|
#define DP_DOWNSPREAD_CTRL 0x107
|
|
# define DP_SPREAD_AMP_0_5 (1 << 4)
|
|
# define DP_MSA_TIMING_PAR_IGNORE_EN (1 << 7) /* eDP */
|
|
|
|
#define DP_MAIN_LINK_CHANNEL_CODING_SET 0x108
|
|
# define DP_SET_ANSI_8B10B (1 << 0)
|
|
|
|
#define DP_I2C_SPEED_CONTROL_STATUS 0x109 /* DPI */
|
|
/* bitmask as for DP_I2C_SPEED_CAP */
|
|
|
|
#define DP_EDP_CONFIGURATION_SET 0x10a /* XXX 1.2? */
|
|
|
|
#define DP_MSTM_CTRL 0x111 /* 1.2 */
|
|
# define DP_MST_EN (1 << 0)
|
|
# define DP_UP_REQ_EN (1 << 1)
|
|
# define DP_UPSTREAM_IS_SRC (1 << 2)
|
|
|
|
#define DP_PSR_EN_CFG 0x170 /* XXX 1.2? */
|
|
# define DP_PSR_ENABLE (1 << 0)
|
|
# define DP_PSR_MAIN_LINK_ACTIVE (1 << 1)
|
|
# define DP_PSR_CRC_VERIFICATION (1 << 2)
|
|
# define DP_PSR_FRAME_CAPTURE (1 << 3)
|
|
|
|
#define DP_ADAPTER_CTRL 0x1a0
|
|
# define DP_ADAPTER_CTRL_FORCE_LOAD_SENSE (1 << 0)
|
|
|
|
#define DP_BRANCH_DEVICE_CTRL 0x1a1
|
|
# define DP_BRANCH_DEVICE_IRQ_HPD (1 << 0)
|
|
|
|
#define DP_PAYLOAD_ALLOCATE_SET 0x1c0
|
|
#define DP_PAYLOAD_ALLOCATE_START_TIME_SLOT 0x1c1
|
|
#define DP_PAYLOAD_ALLOCATE_TIME_SLOT_COUNT 0x1c2
|
|
|
|
#define DP_SINK_COUNT 0x200
|
|
/* prior to 1.2 bit 7 was reserved mbz */
|
|
# define DP_GET_SINK_COUNT(x) ((((x) & 0x80) >> 1) | ((x) & 0x3f))
|
|
# define DP_SINK_CP_READY (1 << 6)
|
|
|
|
#define DP_DEVICE_SERVICE_IRQ_VECTOR 0x201
|
|
# define DP_REMOTE_CONTROL_COMMAND_PENDING (1 << 0)
|
|
# define DP_AUTOMATED_TEST_REQUEST (1 << 1)
|
|
# define DP_CP_IRQ (1 << 2)
|
|
# define DP_MCCS_IRQ (1 << 3)
|
|
# define DP_DOWN_REP_MSG_RDY (1 << 4) /* 1.2 MST */
|
|
# define DP_UP_REQ_MSG_RDY (1 << 5) /* 1.2 MST */
|
|
# define DP_SINK_SPECIFIC_IRQ (1 << 6)
|
|
|
|
#define DP_LANE0_1_STATUS 0x202
|
|
#define DP_LANE2_3_STATUS 0x203
|
|
# define DP_LANE_CR_DONE (1 << 0)
|
|
# define DP_LANE_CHANNEL_EQ_DONE (1 << 1)
|
|
# define DP_LANE_SYMBOL_LOCKED (1 << 2)
|
|
|
|
#define DP_CHANNEL_EQ_BITS (DP_LANE_CR_DONE | \
|
|
DP_LANE_CHANNEL_EQ_DONE | \
|
|
DP_LANE_SYMBOL_LOCKED)
|
|
|
|
#define DP_LANE_ALIGN_STATUS_UPDATED 0x204
|
|
|
|
#define DP_INTERLANE_ALIGN_DONE (1 << 0)
|
|
#define DP_DOWNSTREAM_PORT_STATUS_CHANGED (1 << 6)
|
|
#define DP_LINK_STATUS_UPDATED (1 << 7)
|
|
|
|
#define DP_SINK_STATUS 0x205
|
|
#define DP_SINK_STATUS_PORT0_IN_SYNC (1 << 0)
|
|
|
|
#define DP_RECEIVE_PORT_0_STATUS (1 << 0)
|
|
#define DP_RECEIVE_PORT_1_STATUS (1 << 1)
|
|
|
|
#define DP_ADJUST_REQUEST_LANE0_1 0x206
|
|
#define DP_ADJUST_REQUEST_LANE2_3 0x207
|
|
# define DP_ADJUST_VOLTAGE_SWING_LANE0_MASK 0x03
|
|
# define DP_ADJUST_VOLTAGE_SWING_LANE0_SHIFT 0
|
|
# define DP_ADJUST_PRE_EMPHASIS_LANE0_MASK 0x0c
|
|
# define DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT 2
|
|
# define DP_ADJUST_VOLTAGE_SWING_LANE1_MASK 0x30
|
|
# define DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT 4
|
|
# define DP_ADJUST_PRE_EMPHASIS_LANE1_MASK 0xc0
|
|
# define DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT 6
|
|
|
|
#define DP_TEST_REQUEST 0x218
|
|
# define DP_TEST_LINK_TRAINING (1 << 0)
|
|
# define DP_TEST_LINK_VIDEO_PATTERN (1 << 1)
|
|
# define DP_TEST_LINK_EDID_READ (1 << 2)
|
|
# define DP_TEST_LINK_PHY_TEST_PATTERN (1 << 3) /* DPCD >= 1.1 */
|
|
# define DP_TEST_LINK_FAUX_PATTERN (1 << 4) /* DPCD >= 1.2 */
|
|
|
|
#define DP_TEST_LINK_RATE 0x219
|
|
# define DP_LINK_RATE_162 (0x6)
|
|
# define DP_LINK_RATE_27 (0xa)
|
|
|
|
#define DP_TEST_LANE_COUNT 0x220
|
|
|
|
#define DP_TEST_PATTERN 0x221
|
|
|
|
#define DP_TEST_CRC_R_CR 0x240
|
|
#define DP_TEST_CRC_G_Y 0x242
|
|
#define DP_TEST_CRC_B_CB 0x244
|
|
|
|
#define DP_TEST_SINK_MISC 0x246
|
|
#define DP_TEST_CRC_SUPPORTED (1 << 5)
|
|
|
|
#define DP_TEST_RESPONSE 0x260
|
|
# define DP_TEST_ACK (1 << 0)
|
|
# define DP_TEST_NAK (1 << 1)
|
|
# define DP_TEST_EDID_CHECKSUM_WRITE (1 << 2)
|
|
|
|
#define DP_TEST_EDID_CHECKSUM 0x261
|
|
|
|
#define DP_TEST_SINK 0x270
|
|
#define DP_TEST_SINK_START (1 << 0)
|
|
|
|
#define DP_PAYLOAD_TABLE_UPDATE_STATUS 0x2c0 /* 1.2 MST */
|
|
# define DP_PAYLOAD_TABLE_UPDATED (1 << 0)
|
|
# define DP_PAYLOAD_ACT_HANDLED (1 << 1)
|
|
|
|
#define DP_VC_PAYLOAD_ID_SLOT_1 0x2c1 /* 1.2 MST */
|
|
/* up to ID_SLOT_63 at 0x2ff */
|
|
|
|
#define DP_SOURCE_OUI 0x300
|
|
#define DP_SINK_OUI 0x400
|
|
#define DP_BRANCH_OUI 0x500
|
|
|
|
#define DP_SET_POWER 0x600
|
|
# define DP_SET_POWER_D0 0x1
|
|
# define DP_SET_POWER_D3 0x2
|
|
# define DP_SET_POWER_MASK 0x3
|
|
|
|
#define DP_SIDEBAND_MSG_DOWN_REQ_BASE 0x1000 /* 1.2 MST */
|
|
#define DP_SIDEBAND_MSG_UP_REP_BASE 0x1200 /* 1.2 MST */
|
|
#define DP_SIDEBAND_MSG_DOWN_REP_BASE 0x1400 /* 1.2 MST */
|
|
#define DP_SIDEBAND_MSG_UP_REQ_BASE 0x1600 /* 1.2 MST */
|
|
|
|
#define DP_SINK_COUNT_ESI 0x2002 /* 1.2 */
|
|
/* 0-5 sink count */
|
|
# define DP_SINK_COUNT_CP_READY (1 << 6)
|
|
|
|
#define DP_DEVICE_SERVICE_IRQ_VECTOR_ESI0 0x2003 /* 1.2 */
|
|
|
|
#define DP_DEVICE_SERVICE_IRQ_VECTOR_ESI1 0x2004 /* 1.2 */
|
|
|
|
#define DP_LINK_SERVICE_IRQ_VECTOR_ESI0 0x2005 /* 1.2 */
|
|
|
|
#define DP_PSR_ERROR_STATUS 0x2006 /* XXX 1.2? */
|
|
# define DP_PSR_LINK_CRC_ERROR (1 << 0)
|
|
# define DP_PSR_RFB_STORAGE_ERROR (1 << 1)
|
|
|
|
#define DP_PSR_ESI 0x2007 /* XXX 1.2? */
|
|
# define DP_PSR_CAPS_CHANGE (1 << 0)
|
|
|
|
#define DP_PSR_STATUS 0x2008 /* XXX 1.2? */
|
|
# define DP_PSR_SINK_INACTIVE 0
|
|
# define DP_PSR_SINK_ACTIVE_SRC_SYNCED 1
|
|
# define DP_PSR_SINK_ACTIVE_RFB 2
|
|
# define DP_PSR_SINK_ACTIVE_SINK_SYNCED 3
|
|
# define DP_PSR_SINK_ACTIVE_RESYNC 4
|
|
# define DP_PSR_SINK_INTERNAL_ERROR 7
|
|
# define DP_PSR_SINK_STATE_MASK 0x07
|
|
|
|
/* DP 1.2 Sideband message defines */
|
|
/* peer device type - DP 1.2a Table 2-92 */
|
|
#define DP_PEER_DEVICE_NONE 0x0
|
|
#define DP_PEER_DEVICE_SOURCE_OR_SST 0x1
|
|
#define DP_PEER_DEVICE_MST_BRANCHING 0x2
|
|
#define DP_PEER_DEVICE_SST_SINK 0x3
|
|
#define DP_PEER_DEVICE_DP_LEGACY_CONV 0x4
|
|
|
|
/* DP 1.2 MST sideband request names DP 1.2a Table 2-80 */
|
|
#define DP_LINK_ADDRESS 0x01
|
|
#define DP_CONNECTION_STATUS_NOTIFY 0x02
|
|
#define DP_ENUM_PATH_RESOURCES 0x10
|
|
#define DP_ALLOCATE_PAYLOAD 0x11
|
|
#define DP_QUERY_PAYLOAD 0x12
|
|
#define DP_RESOURCE_STATUS_NOTIFY 0x13
|
|
#define DP_CLEAR_PAYLOAD_ID_TABLE 0x14
|
|
#define DP_REMOTE_DPCD_READ 0x20
|
|
#define DP_REMOTE_DPCD_WRITE 0x21
|
|
#define DP_REMOTE_I2C_READ 0x22
|
|
#define DP_REMOTE_I2C_WRITE 0x23
|
|
#define DP_POWER_UP_PHY 0x24
|
|
#define DP_POWER_DOWN_PHY 0x25
|
|
#define DP_SINK_EVENT_NOTIFY 0x30
|
|
#define DP_QUERY_STREAM_ENC_STATUS 0x38
|
|
|
|
/* DP 1.2 MST sideband nak reasons - table 2.84 */
|
|
#define DP_NAK_WRITE_FAILURE 0x01
|
|
#define DP_NAK_INVALID_READ 0x02
|
|
#define DP_NAK_CRC_FAILURE 0x03
|
|
#define DP_NAK_BAD_PARAM 0x04
|
|
#define DP_NAK_DEFER 0x05
|
|
#define DP_NAK_LINK_FAILURE 0x06
|
|
#define DP_NAK_NO_RESOURCES 0x07
|
|
#define DP_NAK_DPCD_FAIL 0x08
|
|
#define DP_NAK_I2C_NAK 0x09
|
|
#define DP_NAK_ALLOCATE_FAIL 0x0a
|
|
|
|
#define MODE_I2C_START 1
|
|
#define MODE_I2C_WRITE 2
|
|
#define MODE_I2C_READ 4
|
|
#define MODE_I2C_STOP 8
|
|
|
|
/* Rest of file omitted as it is not used in U-Boot */
|
|
|
|
#endif /* _DRM_DP_HELPER_H_ */
|
|
|