upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/doc/README.LED_display

952 B

LED display internal API
=======================================

This README describes the LED display API.

The API is defined by the include file include/led-display.h

The first step in to define CONFIG_CMD_DISPLAY in the board config file.
Then you need to provide the following functions to access LED display:

void display_set(int cmd);

This function should control the state of the LED display. Argument is
an ORed combination of the following values:
DISPLAY_CLEAR -- clear the display
DISPLAY_HOME -- set the position to the beginning of display
DISPLAY_MARK -- enable mark (decimal point), if implemented

int display_putc(char c);

This function should display it's parameter on the LED display in the
current position. Returns the displayed character on success or -1 in
case of failure.

With this functions defined 'display' command will display it's
arguments on the LED display (or clear the display if called without
arguments).