upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
261 lines
8.8 KiB
261 lines
8.8 KiB
/*
|
|
* Copyright 2008 Freescale Semiconductor, Inc.
|
|
*
|
|
* (C) Copyright 2000
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/mmu.h>
|
|
|
|
struct fsl_e_tlb_entry tlb_table[] = {
|
|
/* TLB 0 - for temp stack in cache */
|
|
SET_TLB_ENTRY (0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
|
|
MAS3_SX | MAS3_SW | MAS3_SR, 0,
|
|
0, 0, BOOKE_PAGESZ_4K, 0),
|
|
SET_TLB_ENTRY (0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
|
|
CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
|
|
MAS3_SX | MAS3_SW | MAS3_SR, 0,
|
|
0, 0, BOOKE_PAGESZ_4K, 0),
|
|
SET_TLB_ENTRY (0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
|
|
CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
|
|
MAS3_SX | MAS3_SW | MAS3_SR, 0,
|
|
0, 0, BOOKE_PAGESZ_4K, 0),
|
|
SET_TLB_ENTRY (0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
|
|
CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
|
|
MAS3_SX | MAS3_SW | MAS3_SR, 0,
|
|
0, 0, BOOKE_PAGESZ_4K, 0),
|
|
|
|
#ifndef CONFIG_TQM_BIGFLASH
|
|
/*
|
|
* TLB 0, 1: 128M Non-cacheable, guarded
|
|
* 0xf8000000 128M FLASH
|
|
* Out of reset this entry is only 4K.
|
|
*/
|
|
SET_TLB_ENTRY (1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE,
|
|
MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
|
|
0, 1, BOOKE_PAGESZ_64M, 1),
|
|
SET_TLB_ENTRY (1, CONFIG_SYS_FLASH_BASE + 0x4000000,
|
|
CONFIG_SYS_FLASH_BASE + 0x4000000,
|
|
MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
|
|
0, 0, BOOKE_PAGESZ_64M, 1),
|
|
|
|
/*
|
|
* TLB 2: 256M Non-cacheable, guarded
|
|
* 0x80000000 256M PCI1 MEM First half
|
|
*/
|
|
SET_TLB_ENTRY (1, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_PHYS,
|
|
MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
|
|
0, 2, BOOKE_PAGESZ_256M, 1),
|
|
|
|
/*
|
|
* TLB 3: 256M Non-cacheable, guarded
|
|
* 0x90000000 256M PCI1 MEM Second half
|
|
*/
|
|
SET_TLB_ENTRY (1, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000,
|
|
CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000,
|
|
MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
|
|
0, 3, BOOKE_PAGESZ_256M, 1),
|
|
|
|
#ifdef CONFIG_PCIE1
|
|
/*
|
|
* TLB 4: 256M Non-cacheable, guarded
|
|
* 0xc0000000 256M PCI express MEM First half
|
|
*/
|
|
SET_TLB_ENTRY (1, CONFIG_SYS_PCIE1_MEM_BUS, CONFIG_SYS_PCIE1_MEM_BUS,
|
|
MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
|
|
0, 4, BOOKE_PAGESZ_256M, 1),
|
|
|
|
/*
|
|
* TLB 5: 256M Non-cacheable, guarded
|
|
* 0xd0000000 256M PCI express MEM Second half
|
|
*/
|
|
SET_TLB_ENTRY (1, CONFIG_SYS_PCIE1_MEM_BUS + 0x10000000,
|
|
CONFIG_SYS_PCIE1_MEM_BUS + 0x10000000,
|
|
MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
|
|
0, 5, BOOKE_PAGESZ_256M, 1),
|
|
#else /* !CONFIG_PCIE */
|
|
/*
|
|
* TLB 4: 256M Non-cacheable, guarded
|
|
* 0xc0000000 256M Rapid IO MEM First half
|
|
*/
|
|
SET_TLB_ENTRY (1, CONFIG_SYS_RIO_MEM_BASE, CONFIG_SYS_RIO_MEM_BASE,
|
|
MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
|
|
0, 4, BOOKE_PAGESZ_256M, 1),
|
|
|
|
/*
|
|
* TLB 5: 256M Non-cacheable, guarded
|
|
* 0xd0000000 256M Rapid IO MEM Second half
|
|
*/
|
|
SET_TLB_ENTRY (1, CONFIG_SYS_RIO_MEM_BASE + 0x10000000,
|
|
CONFIG_SYS_RIO_MEM_BASE + 0x10000000,
|
|
MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
|
|
0, 5, BOOKE_PAGESZ_256M, 1),
|
|
#endif /* CONFIG_PCIE */
|
|
|
|
/*
|
|
* TLB 6: 64M Non-cacheable, guarded
|
|
* 0xe0000000 1M CCSRBAR
|
|
* 0xe2000000 16M PCI1 IO
|
|
* 0xe3000000 16M CAN and NAND Flash
|
|
*/
|
|
SET_TLB_ENTRY (1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
|
|
MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
|
|
0, 6, BOOKE_PAGESZ_64M, 1),
|
|
|
|
#if defined(CONFIG_TQM8548_AG) || defined (CONFIG_TQM8548_BE)
|
|
/*
|
|
* TLB 7+8: 2G DDR, cache enabled
|
|
* 0x00000000 2G DDR System memory
|
|
* Without SPD EEPROM configured DDR, this must be setup manually.
|
|
*/
|
|
SET_TLB_ENTRY (1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
|
|
MAS3_SX | MAS3_SW | MAS3_SR, 0,
|
|
0, 7, BOOKE_PAGESZ_1G, 1),
|
|
|
|
SET_TLB_ENTRY (1, CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000,
|
|
CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000,
|
|
MAS3_SX | MAS3_SW | MAS3_SR, 0,
|
|
0, 8, BOOKE_PAGESZ_1G, 1),
|
|
#else
|
|
/*
|
|
* TLB 7+8: 512M DDR, cache disabled (needed for memory test)
|
|
* 0x00000000 512M DDR System memory
|
|
* Without SPD EEPROM configured DDR, this must be setup manually.
|
|
*/
|
|
SET_TLB_ENTRY (1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
|
|
MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
|
|
0, 7, BOOKE_PAGESZ_256M, 1),
|
|
|
|
SET_TLB_ENTRY (1, CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000,
|
|
CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000,
|
|
MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
|
|
0, 8, BOOKE_PAGESZ_256M, 1),
|
|
#endif
|
|
#ifdef CONFIG_PCIE1
|
|
/*
|
|
* TLB 9: 16M Non-cacheable, guarded
|
|
* 0xef000000 16M PCI express IO
|
|
*/
|
|
SET_TLB_ENTRY (1, CONFIG_SYS_PCIE1_IO_BUS, CONFIG_SYS_PCIE1_IO_BUS,
|
|
MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
|
|
0, 9, BOOKE_PAGESZ_16M, 1),
|
|
#endif /* CONFIG_PCIE */
|
|
|
|
#else /* CONFIG_TQM_BIGFLASH */
|
|
|
|
/*
|
|
* TLB 0,1,2,3: 1G Non-cacheable, guarded
|
|
* 0xc0000000 1G FLASH
|
|
* Out of reset this entry is only 4K.
|
|
*/
|
|
SET_TLB_ENTRY (1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE,
|
|
MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
|
|
0, 3, BOOKE_PAGESZ_256M, 1),
|
|
SET_TLB_ENTRY (1, CONFIG_SYS_FLASH_BASE + 0x10000000,
|
|
CONFIG_SYS_FLASH_BASE + 0x10000000,
|
|
MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
|
|
0, 2, BOOKE_PAGESZ_256M, 1),
|
|
SET_TLB_ENTRY (1, CONFIG_SYS_FLASH_BASE + 0x20000000,
|
|
CONFIG_SYS_FLASH_BASE + 0x20000000,
|
|
MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
|
|
0, 1, BOOKE_PAGESZ_256M, 1),
|
|
SET_TLB_ENTRY (1, CONFIG_SYS_FLASH_BASE + 0x30000000,
|
|
CONFIG_SYS_FLASH_BASE + 0x30000000,
|
|
MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
|
|
0, 0, BOOKE_PAGESZ_256M, 1),
|
|
|
|
/*
|
|
* TLB 4: 256M Non-cacheable, guarded
|
|
* 0x80000000 256M PCI1 MEM First half
|
|
*/
|
|
SET_TLB_ENTRY (1, CONFIG_SYS_PCI1_MEM_PHYS, CONFIG_SYS_PCI1_MEM_PHYS,
|
|
MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
|
|
0, 4, BOOKE_PAGESZ_256M, 1),
|
|
|
|
/*
|
|
* TLB 5: 256M Non-cacheable, guarded
|
|
* 0x90000000 256M PCI1 MEM Second half
|
|
*/
|
|
SET_TLB_ENTRY (1, CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000,
|
|
CONFIG_SYS_PCI1_MEM_PHYS + 0x10000000,
|
|
MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
|
|
0, 5, BOOKE_PAGESZ_256M, 1),
|
|
|
|
#ifdef CONFIG_PCIE1
|
|
/*
|
|
* TLB 6: 256M Non-cacheable, guarded
|
|
* 0xc0000000 256M PCI express MEM First half
|
|
*/
|
|
SET_TLB_ENTRY (1, CONFIG_SYS_PCIE1_MEM_BUS, CONFIG_SYS_PCIE1_MEM_BUS,
|
|
MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
|
|
0, 6, BOOKE_PAGESZ_256M, 1),
|
|
#else /* !CONFIG_PCIE */
|
|
/*
|
|
* TLB 6: 256M Non-cacheable, guarded
|
|
* 0xb0000000 256M Rapid IO MEM First half
|
|
*/
|
|
SET_TLB_ENTRY (1, CONFIG_SYS_RIO_MEM_BASE, CONFIG_SYS_RIO_MEM_BASE,
|
|
MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
|
|
0, 6, BOOKE_PAGESZ_256M, 1),
|
|
|
|
#endif /* CONFIG_PCIE */
|
|
|
|
/*
|
|
* TLB 7: 64M Non-cacheable, guarded
|
|
* 0xa0000000 1M CCSRBAR
|
|
* 0xa2000000 16M PCI1 IO
|
|
* 0xa3000000 16M CAN and NAND Flash
|
|
*/
|
|
SET_TLB_ENTRY (1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
|
|
MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
|
|
0, 7, BOOKE_PAGESZ_64M, 1),
|
|
|
|
/*
|
|
* TLB 8+9: 512M DDR, cache disabled (needed for memory test)
|
|
* 0x00000000 512M DDR System memory
|
|
* Without SPD EEPROM configured DDR, this must be setup manually.
|
|
* Make sure the TLB count at the top of this table is correct.
|
|
* Likely it needs to be increased by two for these entries.
|
|
*/
|
|
SET_TLB_ENTRY (1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
|
|
MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
|
|
0, 8, BOOKE_PAGESZ_256M, 1),
|
|
|
|
SET_TLB_ENTRY (1, CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000,
|
|
CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000,
|
|
MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
|
|
0, 9, BOOKE_PAGESZ_256M, 1),
|
|
|
|
#ifdef CONFIG_PCIE1
|
|
/*
|
|
* TLB 10: 16M Non-cacheable, guarded
|
|
* 0xaf000000 16M PCI express IO
|
|
*/
|
|
SET_TLB_ENTRY (1, CONFIG_SYS_PCIE1_IO_BASE, CONFIG_SYS_PCIE1_IO_BASE,
|
|
MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G,
|
|
0, 10, BOOKE_PAGESZ_16M, 1),
|
|
#endif /* CONFIG_PCIE */
|
|
|
|
#endif /* CONFIG_TQM_BIGFLASH */
|
|
};
|
|
|
|
int num_tlb_entries = ARRAY_SIZE (tlb_table);
|
|
|