upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
642 lines
17 KiB
642 lines
17 KiB
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright 2015 Toradex, Inc.
|
|
*
|
|
* Based on vf610twr.c:
|
|
* Copyright 2013 Freescale Semiconductor, Inc.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <asm/arch/iomux-vf610.h>
|
|
#include <asm/arch/ddrmc-vf610.h>
|
|
#include <asm/arch/crm_regs.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <mmc.h>
|
|
#include <fdt_support.h>
|
|
#include <fsl_esdhc.h>
|
|
#include <fsl_dcu_fb.h>
|
|
#include <jffs2/load_kernel.h>
|
|
#include <miiphy.h>
|
|
#include <mtd_node.h>
|
|
#include <netdev.h>
|
|
#include <i2c.h>
|
|
#include <g_dnl.h>
|
|
#include <asm/gpio.h>
|
|
#include <usb.h>
|
|
#include "../common/tdx-common.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
|
|
PAD_CTL_DSE_25ohm | PAD_CTL_OBE_IBE_ENABLE)
|
|
|
|
#define ESDHC_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_HIGH | \
|
|
PAD_CTL_DSE_20ohm | PAD_CTL_OBE_IBE_ENABLE)
|
|
|
|
#define ENET_PAD_CTRL (PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_HIGH | \
|
|
PAD_CTL_DSE_50ohm | PAD_CTL_OBE_IBE_ENABLE)
|
|
|
|
#define USB_PEN_GPIO 83
|
|
#define USB_CDET_GPIO 102
|
|
|
|
static struct ddrmc_cr_setting colibri_vf_cr_settings[] = {
|
|
/* levelling */
|
|
{ DDRMC_CR97_WRLVL_EN, 97 },
|
|
{ DDRMC_CR98_WRLVL_DL_0(0), 98 },
|
|
{ DDRMC_CR99_WRLVL_DL_1(0), 99 },
|
|
{ DDRMC_CR102_RDLVL_REG_EN | DDRMC_CR102_RDLVL_GT_REGEN, 102 },
|
|
{ DDRMC_CR105_RDLVL_DL_0(0), 105 },
|
|
{ DDRMC_CR106_RDLVL_GTDL_0(4), 106 },
|
|
{ DDRMC_CR110_RDLVL_DL_1(0) | DDRMC_CR110_RDLVL_GTDL_1(4), 110 },
|
|
/* AXI */
|
|
{ DDRMC_CR117_AXI0_W_PRI(0) | DDRMC_CR117_AXI0_R_PRI(0), 117 },
|
|
{ DDRMC_CR118_AXI1_W_PRI(1) | DDRMC_CR118_AXI1_R_PRI(1), 118 },
|
|
{ DDRMC_CR120_AXI0_PRI1_RPRI(2) |
|
|
DDRMC_CR120_AXI0_PRI0_RPRI(2), 120 },
|
|
{ DDRMC_CR121_AXI0_PRI3_RPRI(2) |
|
|
DDRMC_CR121_AXI0_PRI2_RPRI(2), 121 },
|
|
{ DDRMC_CR122_AXI1_PRI1_RPRI(1) | DDRMC_CR122_AXI1_PRI0_RPRI(1) |
|
|
DDRMC_CR122_AXI0_PRIRLX(100), 122 },
|
|
{ DDRMC_CR123_AXI1_P_ODR_EN | DDRMC_CR123_AXI1_PRI3_RPRI(1) |
|
|
DDRMC_CR123_AXI1_PRI2_RPRI(1), 123 },
|
|
{ DDRMC_CR124_AXI1_PRIRLX(100), 124 },
|
|
{ DDRMC_CR126_PHY_RDLAT(8), 126 },
|
|
{ DDRMC_CR132_WRLAT_ADJ(5) |
|
|
DDRMC_CR132_RDLAT_ADJ(6), 132 },
|
|
{ DDRMC_CR137_PHYCTL_DL(2), 137 },
|
|
{ DDRMC_CR138_PHY_WRLV_MXDL(256) |
|
|
DDRMC_CR138_PHYDRAM_CK_EN(1), 138 },
|
|
{ DDRMC_CR139_PHY_WRLV_RESPLAT(4) | DDRMC_CR139_PHY_WRLV_LOAD(7) |
|
|
DDRMC_CR139_PHY_WRLV_DLL(3) |
|
|
DDRMC_CR139_PHY_WRLV_EN(3), 139 },
|
|
{ DDRMC_CR140_PHY_WRLV_WW(64), 140 },
|
|
{ DDRMC_CR143_RDLV_GAT_MXDL(1536) |
|
|
DDRMC_CR143_RDLV_MXDL(128), 143 },
|
|
{ DDRMC_CR144_PHY_RDLVL_RES(4) | DDRMC_CR144_PHY_RDLV_LOAD(7) |
|
|
DDRMC_CR144_PHY_RDLV_DLL(3) |
|
|
DDRMC_CR144_PHY_RDLV_EN(3), 144 },
|
|
{ DDRMC_CR145_PHY_RDLV_RR(64), 145 },
|
|
{ DDRMC_CR146_PHY_RDLVL_RESP(64), 146 },
|
|
{ DDRMC_CR147_RDLV_RESP_MASK(983040), 147 },
|
|
{ DDRMC_CR148_RDLV_GATE_RESP_MASK(983040), 148 },
|
|
{ DDRMC_CR151_RDLV_GAT_DQ_ZERO_CNT(1) |
|
|
DDRMC_CR151_RDLVL_DQ_ZERO_CNT(1), 151 },
|
|
|
|
{ DDRMC_CR154_PAD_ZQ_EARLY_CMP_EN_TIMER(13) |
|
|
DDRMC_CR154_PAD_ZQ_MODE(1) |
|
|
DDRMC_CR154_DDR_SEL_PAD_CONTR(3) |
|
|
DDRMC_CR154_PAD_ZQ_HW_FOR(1), 154 },
|
|
{ DDRMC_CR155_PAD_ODT_BYTE1(1) | DDRMC_CR155_PAD_ODT_BYTE0(1), 155 },
|
|
{ DDRMC_CR158_TWR(6), 158 },
|
|
{ DDRMC_CR161_ODT_EN(1) | DDRMC_CR161_TODTH_RD(2) |
|
|
DDRMC_CR161_TODTH_WR(2), 161 },
|
|
/* end marker */
|
|
{ 0, -1 }
|
|
};
|
|
|
|
static const iomux_v3_cfg_t usb_pads[] = {
|
|
VF610_PAD_PTD4__GPIO_83,
|
|
VF610_PAD_PTC29__GPIO_102,
|
|
};
|
|
|
|
int dram_init(void)
|
|
{
|
|
static const struct ddr3_jedec_timings timings = {
|
|
.tinit = 5,
|
|
.trst_pwron = 80000,
|
|
.cke_inactive = 200000,
|
|
.wrlat = 5,
|
|
.caslat_lin = 12,
|
|
.trc = 21,
|
|
.trrd = 4,
|
|
.tccd = 4,
|
|
.tbst_int_interval = 0,
|
|
.tfaw = 20,
|
|
.trp = 6,
|
|
.twtr = 4,
|
|
.tras_min = 15,
|
|
.tmrd = 4,
|
|
.trtp = 4,
|
|
.tras_max = 28080,
|
|
.tmod = 12,
|
|
.tckesr = 4,
|
|
.tcke = 3,
|
|
.trcd_int = 6,
|
|
.tras_lockout = 0,
|
|
.tdal = 12,
|
|
.bstlen = 3,
|
|
.tdll = 512,
|
|
.trp_ab = 6,
|
|
.tref = 3120,
|
|
.trfc = 64,
|
|
.tref_int = 0,
|
|
.tpdex = 3,
|
|
.txpdll = 10,
|
|
.txsnr = 48,
|
|
.txsr = 468,
|
|
.cksrx = 5,
|
|
.cksre = 5,
|
|
.freq_chg_en = 0,
|
|
.zqcl = 256,
|
|
.zqinit = 512,
|
|
.zqcs = 64,
|
|
.ref_per_zq = 64,
|
|
.zqcs_rotate = 0,
|
|
.aprebit = 10,
|
|
.cmd_age_cnt = 64,
|
|
.age_cnt = 64,
|
|
.q_fullness = 7,
|
|
.odt_rd_mapcs0 = 0,
|
|
.odt_wr_mapcs0 = 1,
|
|
.wlmrd = 40,
|
|
.wldqsen = 25,
|
|
};
|
|
|
|
ddrmc_setup_iomux(NULL, 0);
|
|
|
|
ddrmc_ctrl_init_ddr3(&timings, colibri_vf_cr_settings, NULL, 1, 2);
|
|
gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void setup_iomux_uart(void)
|
|
{
|
|
static const iomux_v3_cfg_t uart_pads[] = {
|
|
NEW_PAD_CTRL(VF610_PAD_PTB4__UART1_TX, UART_PAD_CTRL),
|
|
NEW_PAD_CTRL(VF610_PAD_PTB5__UART1_RX, UART_PAD_CTRL),
|
|
NEW_PAD_CTRL(VF610_PAD_PTB10__UART0_TX, UART_PAD_CTRL),
|
|
NEW_PAD_CTRL(VF610_PAD_PTB11__UART0_RX, UART_PAD_CTRL),
|
|
};
|
|
|
|
imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));
|
|
}
|
|
|
|
static void setup_iomux_enet(void)
|
|
{
|
|
static const iomux_v3_cfg_t enet0_pads[] = {
|
|
NEW_PAD_CTRL(VF610_PAD_PTA6__RMII0_CLKOUT, ENET_PAD_CTRL),
|
|
NEW_PAD_CTRL(VF610_PAD_PTC10__RMII1_MDIO, ENET_PAD_CTRL),
|
|
NEW_PAD_CTRL(VF610_PAD_PTC9__RMII1_MDC, ENET_PAD_CTRL),
|
|
NEW_PAD_CTRL(VF610_PAD_PTC11__RMII1_CRS_DV, ENET_PAD_CTRL),
|
|
NEW_PAD_CTRL(VF610_PAD_PTC12__RMII1_RD1, ENET_PAD_CTRL),
|
|
NEW_PAD_CTRL(VF610_PAD_PTC13__RMII1_RD0, ENET_PAD_CTRL),
|
|
NEW_PAD_CTRL(VF610_PAD_PTC14__RMII1_RXER, ENET_PAD_CTRL),
|
|
NEW_PAD_CTRL(VF610_PAD_PTC15__RMII1_TD1, ENET_PAD_CTRL),
|
|
NEW_PAD_CTRL(VF610_PAD_PTC16__RMII1_TD0, ENET_PAD_CTRL),
|
|
NEW_PAD_CTRL(VF610_PAD_PTC17__RMII1_TXEN, ENET_PAD_CTRL),
|
|
};
|
|
|
|
imx_iomux_v3_setup_multiple_pads(enet0_pads, ARRAY_SIZE(enet0_pads));
|
|
}
|
|
|
|
static void setup_iomux_i2c(void)
|
|
{
|
|
static const iomux_v3_cfg_t i2c0_pads[] = {
|
|
VF610_PAD_PTB14__I2C0_SCL,
|
|
VF610_PAD_PTB15__I2C0_SDA,
|
|
};
|
|
|
|
imx_iomux_v3_setup_multiple_pads(i2c0_pads, ARRAY_SIZE(i2c0_pads));
|
|
}
|
|
|
|
#ifdef CONFIG_NAND_VF610_NFC
|
|
static void setup_iomux_nfc(void)
|
|
{
|
|
static const iomux_v3_cfg_t nfc_pads[] = {
|
|
VF610_PAD_PTD23__NF_IO7,
|
|
VF610_PAD_PTD22__NF_IO6,
|
|
VF610_PAD_PTD21__NF_IO5,
|
|
VF610_PAD_PTD20__NF_IO4,
|
|
VF610_PAD_PTD19__NF_IO3,
|
|
VF610_PAD_PTD18__NF_IO2,
|
|
VF610_PAD_PTD17__NF_IO1,
|
|
VF610_PAD_PTD16__NF_IO0,
|
|
VF610_PAD_PTB24__NF_WE_B,
|
|
VF610_PAD_PTB25__NF_CE0_B,
|
|
VF610_PAD_PTB27__NF_RE_B,
|
|
VF610_PAD_PTC26__NF_RB_B,
|
|
VF610_PAD_PTC27__NF_ALE,
|
|
VF610_PAD_PTC28__NF_CLE
|
|
};
|
|
|
|
imx_iomux_v3_setup_multiple_pads(nfc_pads, ARRAY_SIZE(nfc_pads));
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_FSL_DSPI
|
|
static void setup_iomux_dspi(void)
|
|
{
|
|
static const iomux_v3_cfg_t dspi1_pads[] = {
|
|
VF610_PAD_PTD5__DSPI1_CS0,
|
|
VF610_PAD_PTD6__DSPI1_SIN,
|
|
VF610_PAD_PTD7__DSPI1_SOUT,
|
|
VF610_PAD_PTD8__DSPI1_SCK,
|
|
};
|
|
|
|
imx_iomux_v3_setup_multiple_pads(dspi1_pads, ARRAY_SIZE(dspi1_pads));
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_VYBRID_GPIO
|
|
static void setup_iomux_gpio(void)
|
|
{
|
|
static const iomux_v3_cfg_t gpio_pads[] = {
|
|
VF610_PAD_PTA17__GPIO_7,
|
|
VF610_PAD_PTA20__GPIO_10,
|
|
VF610_PAD_PTA21__GPIO_11,
|
|
VF610_PAD_PTA30__GPIO_20,
|
|
VF610_PAD_PTA31__GPIO_21,
|
|
VF610_PAD_PTB0__GPIO_22,
|
|
VF610_PAD_PTB1__GPIO_23,
|
|
VF610_PAD_PTB6__GPIO_28,
|
|
VF610_PAD_PTB7__GPIO_29,
|
|
VF610_PAD_PTB8__GPIO_30,
|
|
VF610_PAD_PTB9__GPIO_31,
|
|
VF610_PAD_PTB12__GPIO_34,
|
|
VF610_PAD_PTB13__GPIO_35,
|
|
VF610_PAD_PTB16__GPIO_38,
|
|
VF610_PAD_PTB17__GPIO_39,
|
|
VF610_PAD_PTB18__GPIO_40,
|
|
VF610_PAD_PTB21__GPIO_43,
|
|
VF610_PAD_PTB22__GPIO_44,
|
|
VF610_PAD_PTC0__GPIO_45,
|
|
VF610_PAD_PTC1__GPIO_46,
|
|
VF610_PAD_PTC2__GPIO_47,
|
|
VF610_PAD_PTC3__GPIO_48,
|
|
VF610_PAD_PTC4__GPIO_49,
|
|
VF610_PAD_PTC5__GPIO_50,
|
|
VF610_PAD_PTC6__GPIO_51,
|
|
VF610_PAD_PTC7__GPIO_52,
|
|
VF610_PAD_PTC8__GPIO_53,
|
|
VF610_PAD_PTD31__GPIO_63,
|
|
VF610_PAD_PTD30__GPIO_64,
|
|
VF610_PAD_PTD29__GPIO_65,
|
|
VF610_PAD_PTD28__GPIO_66,
|
|
VF610_PAD_PTD27__GPIO_67,
|
|
VF610_PAD_PTD26__GPIO_68,
|
|
VF610_PAD_PTD25__GPIO_69,
|
|
VF610_PAD_PTD24__GPIO_70,
|
|
VF610_PAD_PTD9__GPIO_88,
|
|
VF610_PAD_PTD10__GPIO_89,
|
|
VF610_PAD_PTD11__GPIO_90,
|
|
VF610_PAD_PTD12__GPIO_91,
|
|
VF610_PAD_PTD13__GPIO_92,
|
|
VF610_PAD_PTB23__GPIO_93,
|
|
VF610_PAD_PTB26__GPIO_96,
|
|
VF610_PAD_PTB28__GPIO_98,
|
|
VF610_PAD_PTC30__GPIO_103,
|
|
VF610_PAD_PTA7__GPIO_134,
|
|
};
|
|
|
|
imx_iomux_v3_setup_multiple_pads(gpio_pads, ARRAY_SIZE(gpio_pads));
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_VIDEO_FSL_DCU_FB
|
|
static void setup_iomux_fsl_dcu(void)
|
|
{
|
|
static const iomux_v3_cfg_t dcu0_pads[] = {
|
|
VF610_PAD_PTE0__DCU0_HSYNC,
|
|
VF610_PAD_PTE1__DCU0_VSYNC,
|
|
VF610_PAD_PTE2__DCU0_PCLK,
|
|
VF610_PAD_PTE4__DCU0_DE,
|
|
VF610_PAD_PTE5__DCU0_R0,
|
|
VF610_PAD_PTE6__DCU0_R1,
|
|
VF610_PAD_PTE7__DCU0_R2,
|
|
VF610_PAD_PTE8__DCU0_R3,
|
|
VF610_PAD_PTE9__DCU0_R4,
|
|
VF610_PAD_PTE10__DCU0_R5,
|
|
VF610_PAD_PTE11__DCU0_R6,
|
|
VF610_PAD_PTE12__DCU0_R7,
|
|
VF610_PAD_PTE13__DCU0_G0,
|
|
VF610_PAD_PTE14__DCU0_G1,
|
|
VF610_PAD_PTE15__DCU0_G2,
|
|
VF610_PAD_PTE16__DCU0_G3,
|
|
VF610_PAD_PTE17__DCU0_G4,
|
|
VF610_PAD_PTE18__DCU0_G5,
|
|
VF610_PAD_PTE19__DCU0_G6,
|
|
VF610_PAD_PTE20__DCU0_G7,
|
|
VF610_PAD_PTE21__DCU0_B0,
|
|
VF610_PAD_PTE22__DCU0_B1,
|
|
VF610_PAD_PTE23__DCU0_B2,
|
|
VF610_PAD_PTE24__DCU0_B3,
|
|
VF610_PAD_PTE25__DCU0_B4,
|
|
VF610_PAD_PTE26__DCU0_B5,
|
|
VF610_PAD_PTE27__DCU0_B6,
|
|
VF610_PAD_PTE28__DCU0_B7,
|
|
};
|
|
|
|
imx_iomux_v3_setup_multiple_pads(dcu0_pads, ARRAY_SIZE(dcu0_pads));
|
|
}
|
|
|
|
static void setup_tcon(void)
|
|
{
|
|
setbits_le32(TCON0_BASE_ADDR, (1 << 29));
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_FSL_ESDHC
|
|
struct fsl_esdhc_cfg esdhc_cfg[1] = {
|
|
{ESDHC1_BASE_ADDR},
|
|
};
|
|
|
|
int board_mmc_getcd(struct mmc *mmc)
|
|
{
|
|
/* eSDHC1 is always present */
|
|
return 1;
|
|
}
|
|
|
|
int board_mmc_init(bd_t *bis)
|
|
{
|
|
static const iomux_v3_cfg_t esdhc1_pads[] = {
|
|
NEW_PAD_CTRL(VF610_PAD_PTA24__ESDHC1_CLK, ESDHC_PAD_CTRL),
|
|
NEW_PAD_CTRL(VF610_PAD_PTA25__ESDHC1_CMD, ESDHC_PAD_CTRL),
|
|
NEW_PAD_CTRL(VF610_PAD_PTA26__ESDHC1_DAT0, ESDHC_PAD_CTRL),
|
|
NEW_PAD_CTRL(VF610_PAD_PTA27__ESDHC1_DAT1, ESDHC_PAD_CTRL),
|
|
NEW_PAD_CTRL(VF610_PAD_PTA28__ESDHC1_DAT2, ESDHC_PAD_CTRL),
|
|
NEW_PAD_CTRL(VF610_PAD_PTA29__ESDHC1_DAT3, ESDHC_PAD_CTRL),
|
|
};
|
|
|
|
esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
|
|
|
|
imx_iomux_v3_setup_multiple_pads(
|
|
esdhc1_pads, ARRAY_SIZE(esdhc1_pads));
|
|
|
|
return fsl_esdhc_initialize(bis, &esdhc_cfg[0]);
|
|
}
|
|
#endif
|
|
|
|
static inline int is_colibri_vf61(void)
|
|
{
|
|
struct mscm *mscm = (struct mscm *)MSCM_BASE_ADDR;
|
|
|
|
/*
|
|
* Detect board type by Level 2 Cache: VF50 don't have any
|
|
* Level 2 Cache.
|
|
*/
|
|
return !!mscm->cpxcfg1;
|
|
}
|
|
|
|
static void clock_init(void)
|
|
{
|
|
struct ccm_reg *ccm = (struct ccm_reg *)CCM_BASE_ADDR;
|
|
struct anadig_reg *anadig = (struct anadig_reg *)ANADIG_BASE_ADDR;
|
|
u32 pfd_clk_sel, ddr_clk_sel;
|
|
|
|
clrsetbits_le32(&ccm->ccgr0, CCM_REG_CTRL_MASK,
|
|
CCM_CCGR0_UART0_CTRL_MASK);
|
|
#ifdef CONFIG_FSL_DSPI
|
|
setbits_le32(&ccm->ccgr0, CCM_CCGR0_DSPI1_CTRL_MASK);
|
|
#endif
|
|
clrsetbits_le32(&ccm->ccgr1, CCM_REG_CTRL_MASK,
|
|
CCM_CCGR1_PIT_CTRL_MASK | CCM_CCGR1_WDOGA5_CTRL_MASK);
|
|
clrsetbits_le32(&ccm->ccgr2, CCM_REG_CTRL_MASK,
|
|
CCM_CCGR2_IOMUXC_CTRL_MASK | CCM_CCGR2_PORTA_CTRL_MASK |
|
|
CCM_CCGR2_PORTB_CTRL_MASK | CCM_CCGR2_PORTC_CTRL_MASK |
|
|
CCM_CCGR2_PORTD_CTRL_MASK | CCM_CCGR2_PORTE_CTRL_MASK);
|
|
clrsetbits_le32(&ccm->ccgr3, CCM_REG_CTRL_MASK,
|
|
CCM_CCGR3_ANADIG_CTRL_MASK | CCM_CCGR3_SCSC_CTRL_MASK);
|
|
clrsetbits_le32(&ccm->ccgr4, CCM_REG_CTRL_MASK,
|
|
CCM_CCGR4_WKUP_CTRL_MASK | CCM_CCGR4_CCM_CTRL_MASK |
|
|
CCM_CCGR4_GPC_CTRL_MASK | CCM_CCGR4_I2C0_CTRL_MASK);
|
|
clrsetbits_le32(&ccm->ccgr6, CCM_REG_CTRL_MASK,
|
|
CCM_CCGR6_OCOTP_CTRL_MASK | CCM_CCGR6_DDRMC_CTRL_MASK);
|
|
clrsetbits_le32(&ccm->ccgr7, CCM_REG_CTRL_MASK,
|
|
CCM_CCGR7_SDHC1_CTRL_MASK);
|
|
clrsetbits_le32(&ccm->ccgr9, CCM_REG_CTRL_MASK,
|
|
CCM_CCGR9_FEC0_CTRL_MASK | CCM_CCGR9_FEC1_CTRL_MASK);
|
|
clrsetbits_le32(&ccm->ccgr10, CCM_REG_CTRL_MASK,
|
|
CCM_CCGR10_NFC_CTRL_MASK);
|
|
|
|
#ifdef CONFIG_USB_EHCI_VF
|
|
setbits_le32(&ccm->ccgr1, CCM_CCGR1_USBC0_CTRL_MASK);
|
|
setbits_le32(&ccm->ccgr7, CCM_CCGR7_USBC1_CTRL_MASK);
|
|
|
|
clrsetbits_le32(&anadig->pll3_ctrl, ANADIG_PLL3_CTRL_BYPASS |
|
|
ANADIG_PLL3_CTRL_POWERDOWN |
|
|
ANADIG_PLL3_CTRL_DIV_SELECT,
|
|
ANADIG_PLL3_CTRL_ENABLE);
|
|
clrsetbits_le32(&anadig->pll7_ctrl, ANADIG_PLL7_CTRL_BYPASS |
|
|
ANADIG_PLL7_CTRL_POWERDOWN |
|
|
ANADIG_PLL7_CTRL_DIV_SELECT,
|
|
ANADIG_PLL7_CTRL_ENABLE);
|
|
#endif
|
|
|
|
clrsetbits_le32(&anadig->pll5_ctrl, ANADIG_PLL5_CTRL_BYPASS |
|
|
ANADIG_PLL5_CTRL_POWERDOWN, ANADIG_PLL5_CTRL_ENABLE |
|
|
ANADIG_PLL5_CTRL_DIV_SELECT);
|
|
|
|
if (is_colibri_vf61()) {
|
|
clrsetbits_le32(&anadig->pll2_ctrl, ANADIG_PLL5_CTRL_BYPASS |
|
|
ANADIG_PLL2_CTRL_POWERDOWN,
|
|
ANADIG_PLL2_CTRL_ENABLE |
|
|
ANADIG_PLL2_CTRL_DIV_SELECT);
|
|
}
|
|
|
|
clrsetbits_le32(&anadig->pll1_ctrl, ANADIG_PLL1_CTRL_POWERDOWN,
|
|
ANADIG_PLL1_CTRL_ENABLE | ANADIG_PLL1_CTRL_DIV_SELECT);
|
|
|
|
clrsetbits_le32(&ccm->ccr, CCM_CCR_OSCNT_MASK,
|
|
CCM_CCR_FIRC_EN | CCM_CCR_OSCNT(5));
|
|
|
|
/* See "Typical PLL Configuration" */
|
|
if (is_colibri_vf61()) {
|
|
pfd_clk_sel = CCM_CCSR_PLL1_PFD_CLK_SEL(1);
|
|
ddr_clk_sel = CCM_CCSR_DDRC_CLK_SEL(0);
|
|
} else {
|
|
pfd_clk_sel = CCM_CCSR_PLL1_PFD_CLK_SEL(3);
|
|
ddr_clk_sel = CCM_CCSR_DDRC_CLK_SEL(1);
|
|
}
|
|
|
|
clrsetbits_le32(&ccm->ccsr, CCM_REG_CTRL_MASK, pfd_clk_sel |
|
|
CCM_CCSR_PLL2_PFD4_EN | CCM_CCSR_PLL2_PFD3_EN |
|
|
CCM_CCSR_PLL2_PFD2_EN | CCM_CCSR_PLL2_PFD1_EN |
|
|
CCM_CCSR_PLL1_PFD4_EN | CCM_CCSR_PLL1_PFD3_EN |
|
|
CCM_CCSR_PLL1_PFD2_EN | CCM_CCSR_PLL1_PFD1_EN |
|
|
ddr_clk_sel | CCM_CCSR_FAST_CLK_SEL(1) |
|
|
CCM_CCSR_SYS_CLK_SEL(4));
|
|
|
|
clrsetbits_le32(&ccm->cacrr, CCM_REG_CTRL_MASK,
|
|
CCM_CACRR_IPG_CLK_DIV(1) | CCM_CACRR_BUS_CLK_DIV(2) |
|
|
CCM_CACRR_ARM_CLK_DIV(0));
|
|
clrsetbits_le32(&ccm->cscmr1, CCM_REG_CTRL_MASK,
|
|
CCM_CSCMR1_ESDHC1_CLK_SEL(3) |
|
|
CCM_CSCMR1_NFC_CLK_SEL(0));
|
|
clrsetbits_le32(&ccm->cscdr1, CCM_REG_CTRL_MASK,
|
|
CCM_CSCDR1_RMII_CLK_EN);
|
|
clrsetbits_le32(&ccm->cscdr2, CCM_REG_CTRL_MASK,
|
|
CCM_CSCDR2_ESDHC1_EN | CCM_CSCDR2_ESDHC1_CLK_DIV(0) |
|
|
CCM_CSCDR2_NFC_EN);
|
|
clrsetbits_le32(&ccm->cscdr3, CCM_REG_CTRL_MASK,
|
|
CCM_CSCDR3_NFC_PRE_DIV(3));
|
|
clrsetbits_le32(&ccm->cscmr2, CCM_REG_CTRL_MASK,
|
|
CCM_CSCMR2_RMII_CLK_SEL(2));
|
|
|
|
#ifdef CONFIG_VIDEO_FSL_DCU_FB
|
|
setbits_le32(&ccm->ccgr1, CCM_CCGR1_TCON0_CTRL_MASK);
|
|
setbits_le32(&ccm->ccgr3, CCM_CCGR3_DCU0_CTRL_MASK);
|
|
#endif
|
|
}
|
|
|
|
static void mscm_init(void)
|
|
{
|
|
struct mscm_ir *mscmir = (struct mscm_ir *)MSCM_IR_BASE_ADDR;
|
|
int i;
|
|
|
|
for (i = 0; i < MSCM_IRSPRC_NUM; i++)
|
|
writew(MSCM_IRSPRC_CP0_EN, &mscmir->irsprc[i]);
|
|
}
|
|
|
|
int board_phy_config(struct phy_device *phydev)
|
|
{
|
|
if (phydev->drv->config)
|
|
phydev->drv->config(phydev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
clock_init();
|
|
mscm_init();
|
|
|
|
setup_iomux_uart();
|
|
setup_iomux_enet();
|
|
setup_iomux_i2c();
|
|
#ifdef CONFIG_NAND_VF610_NFC
|
|
setup_iomux_nfc();
|
|
#endif
|
|
|
|
#ifdef CONFIG_VYBRID_GPIO
|
|
setup_iomux_gpio();
|
|
#endif
|
|
|
|
#ifdef CONFIG_FSL_DSPI
|
|
setup_iomux_dspi();
|
|
#endif
|
|
|
|
#ifdef CONFIG_VIDEO_FSL_DCU_FB
|
|
setup_tcon();
|
|
setup_iomux_fsl_dcu();
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_BOARD_LATE_INIT
|
|
int board_late_init(void)
|
|
{
|
|
struct src *src = (struct src *)SRC_BASE_ADDR;
|
|
|
|
if (((src->sbmr2 & SRC_SBMR2_BMOD_MASK) >> SRC_SBMR2_BMOD_SHIFT)
|
|
== SRC_SBMR2_BMOD_SERIAL) {
|
|
printf("Serial Downloader recovery mode, disable autoboot\n");
|
|
env_set("bootdelay", "-1");
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_BOARD_LATE_INIT */
|
|
|
|
int board_init(void)
|
|
{
|
|
struct scsc_reg *scsc = (struct scsc_reg *)SCSC_BASE_ADDR;
|
|
|
|
/* address of boot parameters */
|
|
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
|
|
|
|
/*
|
|
* Enable external 32K Oscillator
|
|
*
|
|
* The internal clock experiences significant drift
|
|
* so we must use the external oscillator in order
|
|
* to maintain correct time in the hwclock
|
|
*/
|
|
|
|
setbits_le32(&scsc->sosc_ctr, SCSC_SOSC_CTR_SOSC_EN);
|
|
|
|
#ifdef CONFIG_USB_EHCI_VF
|
|
gpio_request(USB_CDET_GPIO, "usb-cdet-gpio");
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
int checkboard(void)
|
|
{
|
|
if (is_colibri_vf61())
|
|
puts("Board: Colibri VF61\n");
|
|
else
|
|
puts("Board: Colibri VF50\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
|
|
int ft_board_setup(void *blob, bd_t *bd)
|
|
{
|
|
int ret = 0;
|
|
#ifdef CONFIG_FDT_FIXUP_PARTITIONS
|
|
static const struct node_info nodes[] = {
|
|
{ "fsl,vf610-nfc", MTD_DEV_TYPE_NAND, }, /* NAND flash */
|
|
};
|
|
|
|
/* Update partition nodes using info from mtdparts env var */
|
|
puts(" Updating MTD partitions...\n");
|
|
fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes));
|
|
#endif
|
|
#ifdef CONFIG_VIDEO_FSL_DCU_FB
|
|
ret = fsl_dcu_fixedfb_setup(blob);
|
|
if (ret)
|
|
return ret;
|
|
#endif
|
|
|
|
return ft_common_board_setup(blob, bd);
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_USB_EHCI_VF
|
|
int board_ehci_hcd_init(int port)
|
|
{
|
|
imx_iomux_v3_setup_multiple_pads(usb_pads, ARRAY_SIZE(usb_pads));
|
|
|
|
switch (port) {
|
|
case 0:
|
|
/* USBC does not have PEN, also configured as USB client only */
|
|
break;
|
|
case 1:
|
|
gpio_request(USB_PEN_GPIO, "usb-pen-gpio");
|
|
gpio_direction_output(USB_PEN_GPIO, 0);
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
int board_usb_phy_mode(int port)
|
|
{
|
|
switch (port) {
|
|
case 0:
|
|
/*
|
|
* Port 0 is used only in client mode on Colibri Vybrid modules
|
|
* Check for state of USB client gpio pin and accordingly return
|
|
* USB_INIT_DEVICE or USB_INIT_HOST.
|
|
*/
|
|
if (gpio_get_value(USB_CDET_GPIO))
|
|
return USB_INIT_DEVICE;
|
|
else
|
|
return USB_INIT_HOST;
|
|
case 1:
|
|
/* Port 1 is used only in host mode on Colibri Vybrid modules */
|
|
return USB_INIT_HOST;
|
|
default:
|
|
/*
|
|
* There are only two USB controllers on Vybrid. Ideally we will
|
|
* not reach here. However return USB_INIT_HOST if we do.
|
|
*/
|
|
return USB_INIT_HOST;
|
|
}
|
|
}
|
|
#endif
|
|
|