upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
598 lines
17 KiB
598 lines
17 KiB
/*
|
|
* Copyright 2009-2010 Freescale Semiconductor.
|
|
*
|
|
* (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <hwconfig.h>
|
|
#include <pci.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/mmu.h>
|
|
#include <asm/cache.h>
|
|
#include <asm/immap_85xx.h>
|
|
#include <asm/fsl_pci.h>
|
|
#include <asm/fsl_ddr_sdram.h>
|
|
#include <asm/fsl_serdes.h>
|
|
#include <asm/io.h>
|
|
#include <spd_sdram.h>
|
|
#include <i2c.h>
|
|
#include <ioports.h>
|
|
#include <libfdt.h>
|
|
#include <fdt_support.h>
|
|
#include <fsl_esdhc.h>
|
|
|
|
#include "bcsr.h"
|
|
#if defined(CONFIG_PQ_MDS_PIB)
|
|
#include "../common/pq-mds-pib.h"
|
|
#endif
|
|
|
|
const qe_iop_conf_t qe_iop_conf_tab[] = {
|
|
/* QE_MUX_MDC */
|
|
{2, 31, 1, 0, 1}, /* QE_MUX_MDC */
|
|
|
|
/* QE_MUX_MDIO */
|
|
{2, 30, 3, 0, 2}, /* QE_MUX_MDIO */
|
|
|
|
#if defined(CONFIG_SYS_UCC_RGMII_MODE)
|
|
/* UCC_1_RGMII */
|
|
{2, 11, 2, 0, 1}, /* CLK12 */
|
|
{0, 0, 1, 0, 3}, /* ENET1_TXD0_SER1_TXD0 */
|
|
{0, 1, 1, 0, 3}, /* ENET1_TXD1_SER1_TXD1 */
|
|
{0, 2, 1, 0, 1}, /* ENET1_TXD2_SER1_TXD2 */
|
|
{0, 3, 1, 0, 2}, /* ENET1_TXD3_SER1_TXD3 */
|
|
{0, 6, 2, 0, 3}, /* ENET1_RXD0_SER1_RXD0 */
|
|
{0, 7, 2, 0, 1}, /* ENET1_RXD1_SER1_RXD1 */
|
|
{0, 8, 2, 0, 2}, /* ENET1_RXD2_SER1_RXD2 */
|
|
{0, 9, 2, 0, 2}, /* ENET1_RXD3_SER1_RXD3 */
|
|
{0, 4, 1, 0, 2}, /* ENET1_TX_EN_SER1_RTS_B */
|
|
{0, 12, 2, 0, 3}, /* ENET1_RX_DV_SER1_CTS_B */
|
|
{2, 8, 2, 0, 1}, /* ENET1_GRXCLK */
|
|
{2, 20, 1, 0, 2}, /* ENET1_GTXCLK */
|
|
|
|
/* UCC_2_RGMII */
|
|
{2, 16, 2, 0, 3}, /* CLK17 */
|
|
{0, 14, 1, 0, 2}, /* ENET2_TXD0_SER2_TXD0 */
|
|
{0, 15, 1, 0, 2}, /* ENET2_TXD1_SER2_TXD1 */
|
|
{0, 16, 1, 0, 1}, /* ENET2_TXD2_SER2_TXD2 */
|
|
{0, 17, 1, 0, 1}, /* ENET2_TXD3_SER2_TXD3 */
|
|
{0, 20, 2, 0, 2}, /* ENET2_RXD0_SER2_RXD0 */
|
|
{0, 21, 2, 0, 1}, /* ENET2_RXD1_SER2_RXD1 */
|
|
{0, 22, 2, 0, 1}, /* ENET2_RXD2_SER2_RXD2 */
|
|
{0, 23, 2, 0, 1}, /* ENET2_RXD3_SER2_RXD3 */
|
|
{0, 18, 1, 0, 2}, /* ENET2_TX_EN_SER2_RTS_B */
|
|
{0, 26, 2, 0, 3}, /* ENET2_RX_DV_SER2_CTS_B */
|
|
{2, 3, 2, 0, 1}, /* ENET2_GRXCLK */
|
|
{2, 2, 1, 0, 2}, /* ENET2_GTXCLK */
|
|
|
|
/* UCC_3_RGMII */
|
|
{2, 11, 2, 0, 1}, /* CLK12 */
|
|
{0, 29, 1, 0, 2}, /* ENET3_TXD0_SER3_TXD0 */
|
|
{0, 30, 1, 0, 3}, /* ENET3_TXD1_SER3_TXD1 */
|
|
{0, 31, 1, 0, 2}, /* ENET3_TXD2_SER3_TXD2 */
|
|
{1, 0, 1, 0, 3}, /* ENET3_TXD3_SER3_TXD3 */
|
|
{1, 3, 2, 0, 3}, /* ENET3_RXD0_SER3_RXD0 */
|
|
{1, 4, 2, 0, 1}, /* ENET3_RXD1_SER3_RXD1 */
|
|
{1, 5, 2, 0, 2}, /* ENET3_RXD2_SER3_RXD2 */
|
|
{1, 6, 2, 0, 3}, /* ENET3_RXD3_SER3_RXD3 */
|
|
{1, 1, 1, 0, 1}, /* ENET3_TX_EN_SER3_RTS_B */
|
|
{1, 9, 2, 0, 3}, /* ENET3_RX_DV_SER3_CTS_B */
|
|
{2, 9, 2, 0, 2}, /* ENET3_GRXCLK */
|
|
{2, 25, 1, 0, 2}, /* ENET3_GTXCLK */
|
|
|
|
/* UCC_4_RGMII */
|
|
{2, 16, 2, 0, 3}, /* CLK17 */
|
|
{1, 12, 1, 0, 2}, /* ENET4_TXD0_SER4_TXD0 */
|
|
{1, 13, 1, 0, 2}, /* ENET4_TXD1_SER4_TXD1 */
|
|
{1, 14, 1, 0, 1}, /* ENET4_TXD2_SER4_TXD2 */
|
|
{1, 15, 1, 0, 2}, /* ENET4_TXD3_SER4_TXD3 */
|
|
{1, 18, 2, 0, 2}, /* ENET4_RXD0_SER4_RXD0 */
|
|
{1, 19, 2, 0, 1}, /* ENET4_RXD1_SER4_RXD1 */
|
|
{1, 20, 2, 0, 1}, /* ENET4_RXD2_SER4_RXD2 */
|
|
{1, 21, 2, 0, 2}, /* ENET4_RXD3_SER4_RXD3 */
|
|
{1, 16, 1, 0, 2}, /* ENET4_TX_EN_SER4_RTS_B */
|
|
{1, 24, 2, 0, 3}, /* ENET4_RX_DV_SER4_CTS_B */
|
|
{2, 17, 2, 0, 2}, /* ENET4_GRXCLK */
|
|
{2, 24, 1, 0, 2}, /* ENET4_GTXCLK */
|
|
|
|
#elif defined(CONFIG_SYS_UCC_RMII_MODE)
|
|
/* UCC_1_RMII */
|
|
{2, 15, 2, 0, 1}, /* CLK16 */
|
|
{0, 0, 1, 0, 3}, /* ENET1_TXD0_SER1_TXD0 */
|
|
{0, 1, 1, 0, 3}, /* ENET1_TXD1_SER1_TXD1 */
|
|
{0, 6, 2, 0, 3}, /* ENET1_RXD0_SER1_RXD0 */
|
|
{0, 7, 2, 0, 1}, /* ENET1_RXD1_SER1_RXD1 */
|
|
{0, 4, 1, 0, 2}, /* ENET1_TX_EN_SER1_RTS_B */
|
|
{0, 12, 2, 0, 3}, /* ENET1_RX_DV_SER1_CTS_B */
|
|
|
|
/* UCC_2_RMII */
|
|
{2, 15, 2, 0, 1}, /* CLK16 */
|
|
{0, 14, 1, 0, 2}, /* ENET2_TXD0_SER2_TXD0 */
|
|
{0, 15, 1, 0, 2}, /* ENET2_TXD1_SER2_TXD1 */
|
|
{0, 20, 2, 0, 2}, /* ENET2_RXD0_SER2_RXD0 */
|
|
{0, 21, 2, 0, 1}, /* ENET2_RXD1_SER2_RXD1 */
|
|
{0, 18, 1, 0, 2}, /* ENET2_TX_EN_SER2_RTS_B */
|
|
{0, 26, 2, 0, 3}, /* ENET2_RX_DV_SER2_CTS_B */
|
|
|
|
/* UCC_3_RMII */
|
|
{2, 15, 2, 0, 1}, /* CLK16 */
|
|
{0, 29, 1, 0, 2}, /* ENET3_TXD0_SER3_TXD0 */
|
|
{0, 30, 1, 0, 3}, /* ENET3_TXD1_SER3_TXD1 */
|
|
{1, 3, 2, 0, 3}, /* ENET3_RXD0_SER3_RXD0 */
|
|
{1, 4, 2, 0, 1}, /* ENET3_RXD1_SER3_RXD1 */
|
|
{1, 1, 1, 0, 1}, /* ENET3_TX_EN_SER3_RTS_B */
|
|
{1, 9, 2, 0, 3}, /* ENET3_RX_DV_SER3_CTS_B */
|
|
|
|
/* UCC_4_RMII */
|
|
{2, 15, 2, 0, 1}, /* CLK16 */
|
|
{1, 12, 1, 0, 2}, /* ENET4_TXD0_SER4_TXD0 */
|
|
{1, 13, 1, 0, 2}, /* ENET4_TXD1_SER4_TXD1 */
|
|
{1, 18, 2, 0, 2}, /* ENET4_RXD0_SER4_RXD0 */
|
|
{1, 19, 2, 0, 1}, /* ENET4_RXD1_SER4_RXD1 */
|
|
{1, 16, 1, 0, 2}, /* ENET4_TX_EN_SER4_RTS_B */
|
|
{1, 24, 2, 0, 3}, /* ENET4_RX_DV_SER4_CTS_B */
|
|
#endif
|
|
|
|
/* UART1 is muxed with QE PortF bit [9-12].*/
|
|
{5, 12, 2, 0, 3}, /* UART1_SIN */
|
|
{5, 9, 1, 0, 3}, /* UART1_SOUT */
|
|
{5, 10, 2, 0, 3}, /* UART1_CTS_B */
|
|
{5, 11, 1, 0, 2}, /* UART1_RTS_B */
|
|
|
|
/* QE UART */
|
|
{0, 19, 1, 0, 2}, /* QEUART_TX */
|
|
{1, 17, 2, 0, 3}, /* QEUART_RX */
|
|
{0, 25, 1, 0, 1}, /* QEUART_RTS */
|
|
{1, 23, 2, 0, 1}, /* QEUART_CTS */
|
|
|
|
/* QE USB */
|
|
{5, 3, 1, 0, 1}, /* USB_OE */
|
|
{5, 4, 1, 0, 2}, /* USB_TP */
|
|
{5, 5, 1, 0, 2}, /* USB_TN */
|
|
{5, 6, 2, 0, 2}, /* USB_RP */
|
|
{5, 7, 2, 0, 1}, /* USB_RX */
|
|
{5, 8, 2, 0, 1}, /* USB_RN */
|
|
{2, 4, 2, 0, 2}, /* CLK5 */
|
|
|
|
/* SPI Flash, M25P40 */
|
|
{4, 27, 3, 0, 1}, /* SPI_MOSI */
|
|
{4, 28, 3, 0, 1}, /* SPI_MISO */
|
|
{4, 29, 3, 0, 1}, /* SPI_CLK */
|
|
{4, 30, 1, 0, 0}, /* SPI_SEL, GPIO */
|
|
|
|
{0, 0, 0, 0, QE_IOP_TAB_END} /* END of table */
|
|
};
|
|
|
|
void local_bus_init(void);
|
|
|
|
int board_early_init_f (void)
|
|
{
|
|
/*
|
|
* Initialize local bus.
|
|
*/
|
|
local_bus_init ();
|
|
|
|
enable_8569mds_flash_write();
|
|
|
|
#ifdef CONFIG_QE
|
|
enable_8569mds_qe_uec();
|
|
#endif
|
|
|
|
#if CONFIG_SYS_I2C2_OFFSET
|
|
/* Enable I2C2 signals instead of SD signals */
|
|
volatile struct ccsr_gur *gur;
|
|
gur = (struct ccsr_gur *)(CONFIG_SYS_IMMR + 0xe0000);
|
|
gur->plppar1 &= ~PLPPAR1_I2C_BIT_MASK;
|
|
gur->plppar1 |= PLPPAR1_I2C2_VAL;
|
|
gur->plpdir1 &= ~PLPDIR1_I2C_BIT_MASK;
|
|
gur->plpdir1 |= PLPDIR1_I2C2_VAL;
|
|
|
|
disable_8569mds_brd_eeprom_write_protect();
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_early_init_r(void)
|
|
{
|
|
const unsigned int flashbase = CONFIG_SYS_NAND_BASE;
|
|
const u8 flash_esel = 0;
|
|
|
|
/*
|
|
* Remap Boot flash to caching-inhibited
|
|
* so that flash can be erased properly.
|
|
*/
|
|
|
|
/* Flush d-cache and invalidate i-cache of any FLASH data */
|
|
flush_dcache();
|
|
invalidate_icache();
|
|
|
|
/* invalidate existing TLB entry for flash */
|
|
disable_tlb(flash_esel);
|
|
|
|
set_tlb(1, flashbase, CONFIG_SYS_NAND_BASE, /* tlb, epn, rpn */
|
|
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, /* perms, wimge */
|
|
0, flash_esel, /* ts, esel */
|
|
BOOKE_PAGESZ_64M, 1); /* tsize, iprot */
|
|
|
|
return 0;
|
|
}
|
|
|
|
int checkboard (void)
|
|
{
|
|
printf ("Board: 8569 MDS\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if !defined(CONFIG_SPD_EEPROM)
|
|
phys_size_t fixed_sdram(void)
|
|
{
|
|
volatile ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC85xx_DDR_ADDR;
|
|
uint d_init;
|
|
|
|
out_be32(&ddr->cs0_bnds, CONFIG_SYS_DDR_CS0_BNDS);
|
|
out_be32(&ddr->cs0_config, CONFIG_SYS_DDR_CS0_CONFIG);
|
|
out_be32(&ddr->timing_cfg_3, CONFIG_SYS_DDR_TIMING_3);
|
|
out_be32(&ddr->timing_cfg_0, CONFIG_SYS_DDR_TIMING_0);
|
|
out_be32(&ddr->timing_cfg_1, CONFIG_SYS_DDR_TIMING_1);
|
|
out_be32(&ddr->timing_cfg_2, CONFIG_SYS_DDR_TIMING_2);
|
|
out_be32(&ddr->sdram_cfg, CONFIG_SYS_DDR_SDRAM_CFG);
|
|
out_be32(&ddr->sdram_cfg_2, CONFIG_SYS_DDR_SDRAM_CFG_2);
|
|
out_be32(&ddr->sdram_mode, CONFIG_SYS_DDR_SDRAM_MODE);
|
|
out_be32(&ddr->sdram_mode_2, CONFIG_SYS_DDR_SDRAM_MODE_2);
|
|
out_be32(&ddr->sdram_interval, CONFIG_SYS_DDR_SDRAM_INTERVAL);
|
|
out_be32(&ddr->sdram_data_init, CONFIG_SYS_DDR_DATA_INIT);
|
|
out_be32(&ddr->sdram_clk_cntl, CONFIG_SYS_DDR_SDRAM_CLK_CNTL);
|
|
out_be32(&ddr->timing_cfg_4, CONFIG_SYS_DDR_TIMING_4);
|
|
out_be32(&ddr->timing_cfg_5, CONFIG_SYS_DDR_TIMING_5);
|
|
out_be32(&ddr->ddr_zq_cntl, CONFIG_SYS_DDR_ZQ_CNTL);
|
|
out_be32(&ddr->ddr_wrlvl_cntl, CONFIG_SYS_DDR_WRLVL_CNTL);
|
|
out_be32(&ddr->sdram_cfg_2, CONFIG_SYS_DDR_SDRAM_CFG_2);
|
|
#if defined (CONFIG_DDR_ECC)
|
|
out_be32(&ddr->err_int_en, CONFIG_SYS_DDR_ERR_INT_EN);
|
|
out_be32(&ddr->err_disable, CONFIG_SYS_DDR_ERR_DIS);
|
|
out_be32(&ddr->err_sbe, CONFIG_SYS_DDR_SBE);
|
|
#endif
|
|
udelay(500);
|
|
|
|
out_be32(&ddr->sdram_cfg, CONFIG_SYS_DDR_CONTROL);
|
|
#if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
|
|
d_init = 1;
|
|
debug("DDR - 1st controller: memory initializing\n");
|
|
/*
|
|
* Poll until memory is initialized.
|
|
* 512 Meg at 400 might hit this 200 times or so.
|
|
*/
|
|
while ((ddr->sdram_cfg_2 & (d_init << 4)) != 0) {
|
|
udelay(1000);
|
|
}
|
|
debug("DDR: memory initialized\n\n");
|
|
udelay(500);
|
|
#endif
|
|
return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Initialize Local Bus
|
|
*/
|
|
void
|
|
local_bus_init(void)
|
|
{
|
|
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
|
volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
|
|
|
|
uint clkdiv;
|
|
uint lbc_hz;
|
|
sys_info_t sysinfo;
|
|
|
|
get_sys_info(&sysinfo);
|
|
clkdiv = (lbc->lcrr & LCRR_CLKDIV) * 2;
|
|
lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
|
|
|
|
out_be32(&gur->lbiuiplldcr1, 0x00078080);
|
|
if (clkdiv == 16)
|
|
out_be32(&gur->lbiuiplldcr0, 0x7c0f1bf0);
|
|
else if (clkdiv == 8)
|
|
out_be32(&gur->lbiuiplldcr0, 0x6c0f1bf0);
|
|
else if (clkdiv == 4)
|
|
out_be32(&gur->lbiuiplldcr0, 0x5c0f1bf0);
|
|
|
|
out_be32(&lbc->lcrr, (u32)in_be32(&lbc->lcrr)| 0x00030000);
|
|
}
|
|
|
|
static void fdt_board_disable_serial(void *blob, bd_t *bd, const char *alias)
|
|
{
|
|
const char *status = "disabled";
|
|
int off;
|
|
int err;
|
|
|
|
off = fdt_path_offset(blob, alias);
|
|
if (off < 0) {
|
|
printf("WARNING: could not find %s alias: %s.\n", alias,
|
|
fdt_strerror(off));
|
|
return;
|
|
}
|
|
|
|
err = fdt_setprop(blob, off, "status", status, strlen(status) + 1);
|
|
if (err) {
|
|
printf("WARNING: could not set status for serial0: %s.\n",
|
|
fdt_strerror(err));
|
|
return;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Because of an erratum in prototype boards it is impossible to use eSDHC
|
|
* without disabling UART0 (which makes it quite easy to 'brick' the board
|
|
* by simply issung 'setenv hwconfig esdhc', and not able to interact with
|
|
* U-Boot anylonger).
|
|
*
|
|
* So, but default we assume that the board is a prototype, which is a most
|
|
* safe assumption. There is no way to determine board revision from a
|
|
* register, so we use hwconfig.
|
|
*/
|
|
|
|
static int prototype_board(void)
|
|
{
|
|
if (hwconfig_subarg("board", "rev", NULL))
|
|
return hwconfig_subarg_cmp("board", "rev", "prototype");
|
|
return 1;
|
|
}
|
|
|
|
static int esdhc_disables_uart0(void)
|
|
{
|
|
return prototype_board() ||
|
|
hwconfig_subarg_cmp("esdhc", "mode", "4-bits");
|
|
}
|
|
|
|
static void fdt_board_fixup_qe_uart(void *blob, bd_t *bd)
|
|
{
|
|
u8 *bcsr = (u8 *)CONFIG_SYS_BCSR_BASE;
|
|
const char *devtype = "serial";
|
|
const char *compat = "ucc_uart";
|
|
const char *clk = "brg9";
|
|
u32 portnum = 0;
|
|
int off = -1;
|
|
|
|
if (!hwconfig("qe_uart"))
|
|
return;
|
|
|
|
if (hwconfig("esdhc") && esdhc_disables_uart0()) {
|
|
printf("QE UART: won't enable with esdhc.\n");
|
|
return;
|
|
}
|
|
|
|
fdt_board_disable_serial(blob, bd, "serial1");
|
|
|
|
while (1) {
|
|
const u32 *idx;
|
|
int len;
|
|
|
|
off = fdt_node_offset_by_compatible(blob, off, "ucc_geth");
|
|
if (off < 0) {
|
|
printf("WARNING: unable to fixup device tree for "
|
|
"QE UART\n");
|
|
return;
|
|
}
|
|
|
|
idx = fdt_getprop(blob, off, "cell-index", &len);
|
|
if (!idx || len != sizeof(*idx) || *idx != fdt32_to_cpu(2))
|
|
continue;
|
|
break;
|
|
}
|
|
|
|
fdt_setprop(blob, off, "device_type", devtype, strlen(devtype) + 1);
|
|
fdt_setprop(blob, off, "compatible", compat, strlen(compat) + 1);
|
|
fdt_setprop(blob, off, "tx-clock-name", clk, strlen(clk) + 1);
|
|
fdt_setprop(blob, off, "rx-clock-name", clk, strlen(clk) + 1);
|
|
fdt_setprop(blob, off, "port-number", &portnum, sizeof(portnum));
|
|
|
|
setbits_8(&bcsr[15], BCSR15_QEUART_EN);
|
|
}
|
|
|
|
#ifdef CONFIG_FSL_ESDHC
|
|
|
|
int board_mmc_init(bd_t *bd)
|
|
{
|
|
struct ccsr_gur *gur = (struct ccsr_gur *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
|
|
u8 *bcsr = (u8 *)CONFIG_SYS_BCSR_BASE;
|
|
u8 bcsr6 = BCSR6_SD_CARD_1BIT;
|
|
|
|
if (!hwconfig("esdhc"))
|
|
return 0;
|
|
|
|
printf("Enabling eSDHC...\n"
|
|
" For eSDHC to function, I2C2 ");
|
|
if (esdhc_disables_uart0()) {
|
|
printf("and UART0 should be disabled.\n");
|
|
printf(" Redirecting stderr, stdout and stdin to UART1...\n");
|
|
console_assign(stderr, "eserial1");
|
|
console_assign(stdout, "eserial1");
|
|
console_assign(stdin, "eserial1");
|
|
printf("Switched to UART1 (initial log has been printed to "
|
|
"UART0).\n");
|
|
|
|
clrsetbits_be32(&gur->plppar1, PLPPAR1_UART0_BIT_MASK,
|
|
PLPPAR1_ESDHC_4BITS_VAL);
|
|
clrsetbits_be32(&gur->plpdir1, PLPDIR1_UART0_BIT_MASK,
|
|
PLPDIR1_ESDHC_4BITS_VAL);
|
|
bcsr6 |= BCSR6_SD_CARD_4BITS;
|
|
} else {
|
|
printf("should be disabled.\n");
|
|
}
|
|
|
|
/* Assign I2C2 signals to eSDHC. */
|
|
clrsetbits_be32(&gur->plppar1, PLPPAR1_I2C_BIT_MASK,
|
|
PLPPAR1_ESDHC_VAL);
|
|
clrsetbits_be32(&gur->plpdir1, PLPDIR1_I2C_BIT_MASK,
|
|
PLPDIR1_ESDHC_VAL);
|
|
|
|
/* Mux I2C2 (and optionally UART0) signals to eSDHC. */
|
|
setbits_8(&bcsr[6], bcsr6);
|
|
|
|
return fsl_esdhc_mmc_init(bd);
|
|
}
|
|
|
|
static void fdt_board_fixup_esdhc(void *blob, bd_t *bd)
|
|
{
|
|
const char *status = "disabled";
|
|
int off = -1;
|
|
|
|
if (!hwconfig("esdhc"))
|
|
return;
|
|
|
|
if (esdhc_disables_uart0())
|
|
fdt_board_disable_serial(blob, bd, "serial0");
|
|
|
|
while (1) {
|
|
const u32 *idx;
|
|
int len;
|
|
|
|
off = fdt_node_offset_by_compatible(blob, off, "fsl-i2c");
|
|
if (off < 0)
|
|
break;
|
|
|
|
idx = fdt_getprop(blob, off, "cell-index", &len);
|
|
if (!idx || len != sizeof(*idx))
|
|
continue;
|
|
|
|
if (*idx == 1) {
|
|
fdt_setprop(blob, off, "status", status,
|
|
strlen(status) + 1);
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (hwconfig_subarg_cmp("esdhc", "mode", "4-bits")) {
|
|
off = fdt_node_offset_by_compatible(blob, -1, "fsl,esdhc");
|
|
if (off < 0) {
|
|
printf("WARNING: could not find esdhc node\n");
|
|
return;
|
|
}
|
|
fdt_delprop(blob, off, "sdhci,1-bit-only");
|
|
}
|
|
}
|
|
#else
|
|
static inline void fdt_board_fixup_esdhc(void *blob, bd_t *bd) {}
|
|
#endif
|
|
|
|
static void fdt_board_fixup_qe_usb(void *blob, bd_t *bd)
|
|
{
|
|
u8 *bcsr = (u8 *)CONFIG_SYS_BCSR_BASE;
|
|
|
|
if (hwconfig_subarg_cmp("qe_usb", "speed", "low"))
|
|
clrbits_8(&bcsr[17], BCSR17_nUSBLOWSPD);
|
|
else
|
|
setbits_8(&bcsr[17], BCSR17_nUSBLOWSPD);
|
|
|
|
if (hwconfig_subarg_cmp("qe_usb", "mode", "peripheral")) {
|
|
clrbits_8(&bcsr[17], BCSR17_USBVCC);
|
|
clrbits_8(&bcsr[17], BCSR17_USBMODE);
|
|
do_fixup_by_compat(blob, "fsl,mpc8569-qe-usb", "mode",
|
|
"peripheral", sizeof("peripheral"), 1);
|
|
} else {
|
|
setbits_8(&bcsr[17], BCSR17_USBVCC);
|
|
setbits_8(&bcsr[17], BCSR17_USBMODE);
|
|
}
|
|
|
|
clrbits_8(&bcsr[17], BCSR17_nUSBEN);
|
|
}
|
|
|
|
#ifdef CONFIG_PCI
|
|
void pci_init_board(void)
|
|
{
|
|
#if defined(CONFIG_PQ_MDS_PIB)
|
|
pib_init();
|
|
#endif
|
|
|
|
fsl_pcie_init_board(0);
|
|
}
|
|
#endif /* CONFIG_PCI */
|
|
|
|
#if defined(CONFIG_OF_BOARD_SETUP)
|
|
void ft_board_setup(void *blob, bd_t *bd)
|
|
{
|
|
#if defined(CONFIG_SYS_UCC_RMII_MODE)
|
|
int nodeoff, off, err;
|
|
unsigned int val;
|
|
const u32 *ph;
|
|
const u32 *index;
|
|
|
|
/* fixup device tree for supporting rmii mode */
|
|
nodeoff = -1;
|
|
while ((nodeoff = fdt_node_offset_by_compatible(blob, nodeoff,
|
|
"ucc_geth")) >= 0) {
|
|
err = fdt_setprop_string(blob, nodeoff, "tx-clock-name",
|
|
"clk16");
|
|
if (err < 0) {
|
|
printf("WARNING: could not set tx-clock-name %s.\n",
|
|
fdt_strerror(err));
|
|
break;
|
|
}
|
|
|
|
err = fdt_fixup_phy_connection(blob, nodeoff, RMII);
|
|
|
|
if (err < 0) {
|
|
printf("WARNING: could not set phy-connection-type "
|
|
"%s.\n", fdt_strerror(err));
|
|
break;
|
|
}
|
|
|
|
index = fdt_getprop(blob, nodeoff, "cell-index", 0);
|
|
if (index == NULL) {
|
|
printf("WARNING: could not get cell-index of ucc\n");
|
|
break;
|
|
}
|
|
|
|
ph = fdt_getprop(blob, nodeoff, "phy-handle", 0);
|
|
if (ph == NULL) {
|
|
printf("WARNING: could not get phy-handle of ucc\n");
|
|
break;
|
|
}
|
|
|
|
off = fdt_node_offset_by_phandle(blob, *ph);
|
|
if (off < 0) {
|
|
printf("WARNING: could not get phy node %s.\n",
|
|
fdt_strerror(err));
|
|
break;
|
|
}
|
|
|
|
val = 0x7 + *index; /* RMII phy address starts from 0x8 */
|
|
|
|
err = fdt_setprop(blob, off, "reg", &val, sizeof(u32));
|
|
if (err < 0) {
|
|
printf("WARNING: could not set reg for phy-handle "
|
|
"%s.\n", fdt_strerror(err));
|
|
break;
|
|
}
|
|
}
|
|
#endif
|
|
ft_cpu_setup(blob, bd);
|
|
|
|
FT_FSL_PCI_SETUP;
|
|
|
|
fdt_board_fixup_esdhc(blob, bd);
|
|
fdt_board_fixup_qe_uart(blob, bd);
|
|
fdt_board_fixup_qe_usb(blob, bd);
|
|
}
|
|
#endif
|
|
|