upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
706 lines
20 KiB
706 lines
20 KiB
/*
|
|
* (C) Copyright 2010
|
|
* Stefano Babic, DENX Software Engineering, sbabic@denx.de.
|
|
*
|
|
* (C) Copyright 2009 Freescale Semiconductor, Inc.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <asm/arch/mx5x_pins.h>
|
|
#include <asm/arch/crm_regs.h>
|
|
#include <asm/arch/iomux.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <i2c.h>
|
|
#include <mmc.h>
|
|
#include <pmic.h>
|
|
#include <fsl_esdhc.h>
|
|
#include <fsl_pmic.h>
|
|
#include <mc13892.h>
|
|
#include <linux/fb.h>
|
|
|
|
#include <ipu_pixfmt.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
static struct fb_videomode nec_nl6448bc26_09c = {
|
|
"NEC_NL6448BC26-09C",
|
|
60, /* Refresh */
|
|
640, /* xres */
|
|
480, /* yres */
|
|
37650, /* pixclock = 26.56Mhz */
|
|
48, /* left margin */
|
|
16, /* right margin */
|
|
31, /* upper margin */
|
|
12, /* lower margin */
|
|
96, /* hsync-len */
|
|
2, /* vsync-len */
|
|
0, /* sync */
|
|
FB_VMODE_NONINTERLACED, /* vmode */
|
|
0, /* flag */
|
|
};
|
|
|
|
#ifdef CONFIG_HW_WATCHDOG
|
|
#include <watchdog.h>
|
|
void hw_watchdog_reset(void)
|
|
{
|
|
int val;
|
|
|
|
/* toggle watchdog trigger pin */
|
|
val = gpio_get_value(66);
|
|
val = val ? 0 : 1;
|
|
gpio_set_value(66, val);
|
|
}
|
|
#endif
|
|
|
|
static void init_drive_strength(void)
|
|
{
|
|
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_PKEDDR, PAD_CTL_DDR_INPUT_CMOS);
|
|
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_PKEADDR, PAD_CTL_PKE_ENABLE);
|
|
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDRAPKS, PAD_CTL_PUE_KEEPER);
|
|
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDRAPUS, PAD_CTL_100K_PU);
|
|
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_SR_A1, PAD_CTL_SRE_FAST);
|
|
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_A0, PAD_CTL_DRV_HIGH);
|
|
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_A1, PAD_CTL_DRV_HIGH);
|
|
mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_RAS,
|
|
PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
|
|
mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_CAS,
|
|
PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
|
|
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_PKEDDR, PAD_CTL_PKE_ENABLE);
|
|
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDRPKS, PAD_CTL_PUE_KEEPER);
|
|
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_HYSDDR0, PAD_CTL_HYS_NONE);
|
|
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_HYSDDR1, PAD_CTL_HYS_NONE);
|
|
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_HYSDDR2, PAD_CTL_HYS_NONE);
|
|
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_HYSDDR3, PAD_CTL_HYS_NONE);
|
|
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_SR_B0, PAD_CTL_SRE_FAST);
|
|
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_SR_B1, PAD_CTL_SRE_FAST);
|
|
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_SR_B2, PAD_CTL_SRE_FAST);
|
|
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDR_SR_B4, PAD_CTL_SRE_FAST);
|
|
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DDRPUS, PAD_CTL_100K_PU);
|
|
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_INMODE1, PAD_CTL_DDR_INPUT_CMOS);
|
|
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DRAM_B0, PAD_CTL_DRV_MEDIUM);
|
|
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DRAM_B1, PAD_CTL_DRV_MEDIUM);
|
|
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DRAM_B2, PAD_CTL_DRV_MEDIUM);
|
|
mxc_iomux_set_pad(MX51_PIN_CTL_GRP_DRAM_B4, PAD_CTL_DRV_MEDIUM);
|
|
|
|
/* Setting pad options */
|
|
mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDWE,
|
|
PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
|
|
PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
|
|
mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDCKE0,
|
|
PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
|
|
PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
|
|
mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDCKE1,
|
|
PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
|
|
PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
|
|
mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDCLK,
|
|
PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
|
|
PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
|
|
mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDQS0,
|
|
PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
|
|
PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
|
|
mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDQS1,
|
|
PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
|
|
PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
|
|
mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDQS2,
|
|
PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
|
|
PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
|
|
mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_SDQS3,
|
|
PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
|
|
PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
|
|
mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_CS0,
|
|
PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
|
|
PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
|
|
mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_CS1,
|
|
PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
|
|
PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
|
|
mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_DQM0,
|
|
PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
|
|
PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
|
|
mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_DQM1,
|
|
PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
|
|
PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
|
|
mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_DQM2,
|
|
PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
|
|
PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
|
|
mxc_iomux_set_pad(MX51_PIN_CTL_DRAM_DQM3,
|
|
PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
|
|
PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST);
|
|
}
|
|
|
|
int dram_init(void)
|
|
{
|
|
gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1,
|
|
PHYS_SDRAM_1_SIZE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void setup_weim(void)
|
|
{
|
|
struct weim *pweim = (struct weim *)WEIM_BASE_ADDR;
|
|
|
|
pweim->cs0gcr1 = 0x004100b9;
|
|
pweim->cs0gcr2 = 0x00000001;
|
|
pweim->cs0rcr1 = 0x0a018000;
|
|
pweim->cs0rcr2 = 0;
|
|
pweim->cs0wcr1 = 0x0704a240;
|
|
}
|
|
|
|
static void setup_uart(void)
|
|
{
|
|
unsigned int pad = PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE |
|
|
PAD_CTL_PUE_PULL | PAD_CTL_DRV_HIGH | PAD_CTL_SRE_FAST;
|
|
/* console RX on Pin EIM_D25 */
|
|
mxc_request_iomux(MX51_PIN_EIM_D25, IOMUX_CONFIG_ALT3);
|
|
mxc_iomux_set_pad(MX51_PIN_EIM_D25, pad);
|
|
/* console TX on Pin EIM_D26 */
|
|
mxc_request_iomux(MX51_PIN_EIM_D26, IOMUX_CONFIG_ALT3);
|
|
mxc_iomux_set_pad(MX51_PIN_EIM_D26, pad);
|
|
}
|
|
|
|
#ifdef CONFIG_MXC_SPI
|
|
void spi_io_init(void)
|
|
{
|
|
/* 000: Select mux mode: ALT0 mux port: MOSI of instance: ecspi1 */
|
|
mxc_request_iomux(MX51_PIN_CSPI1_MOSI, IOMUX_CONFIG_ALT0);
|
|
mxc_iomux_set_pad(MX51_PIN_CSPI1_MOSI,
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
|
|
|
|
/* 000: Select mux mode: ALT0 mux port: MISO of instance: ecspi1. */
|
|
mxc_request_iomux(MX51_PIN_CSPI1_MISO, IOMUX_CONFIG_ALT0);
|
|
mxc_iomux_set_pad(MX51_PIN_CSPI1_MISO,
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
|
|
|
|
/* 000: Select mux mode: ALT0 mux port: SS0 of instance: ecspi1. */
|
|
mxc_request_iomux(MX51_PIN_CSPI1_SS0, IOMUX_CONFIG_ALT0);
|
|
mxc_iomux_set_pad(MX51_PIN_CSPI1_SS0,
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE |
|
|
PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
|
|
|
|
/*
|
|
* SS1 will be used as GPIO because of uninterrupted
|
|
* long SPI transmissions (GPIO4_25)
|
|
*/
|
|
mxc_request_iomux(MX51_PIN_CSPI1_SS1, IOMUX_CONFIG_ALT3);
|
|
mxc_iomux_set_pad(MX51_PIN_CSPI1_SS1,
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE |
|
|
PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
|
|
|
|
/* 000: Select mux mode: ALT0 mux port: SS2 of instance: ecspi1. */
|
|
mxc_request_iomux(MX51_PIN_DI1_PIN11, IOMUX_CONFIG_ALT7);
|
|
mxc_iomux_set_pad(MX51_PIN_DI1_PIN11,
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE |
|
|
PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
|
|
|
|
/* 000: Select mux mode: ALT0 mux port: SCLK of instance: ecspi1. */
|
|
mxc_request_iomux(MX51_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT0);
|
|
mxc_iomux_set_pad(MX51_PIN_CSPI1_SCLK,
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
|
|
}
|
|
|
|
static void reset_peripherals(int reset)
|
|
{
|
|
if (reset) {
|
|
|
|
/* reset_n is on NANDF_D15 */
|
|
gpio_direction_output(89, 0);
|
|
|
|
#ifdef CONFIG_VISION2_HW_1_0
|
|
/*
|
|
* set FEC Configuration lines
|
|
* set levels of FEC config lines
|
|
*/
|
|
gpio_direction_output(75, 0);
|
|
gpio_direction_output(74, 1);
|
|
gpio_direction_output(95, 1);
|
|
|
|
/* set direction of FEC config lines */
|
|
gpio_direction_output(59, 0);
|
|
gpio_direction_output(60, 0);
|
|
gpio_direction_output(61, 0);
|
|
gpio_direction_output(55, 1);
|
|
|
|
/* FEC_RXD1 - sel GPIO (2-23) for configuration -> 1 */
|
|
mxc_request_iomux(MX51_PIN_EIM_EB3, IOMUX_CONFIG_ALT1);
|
|
/* FEC_RXD2 - sel GPIO (2-27) for configuration -> 0 */
|
|
mxc_request_iomux(MX51_PIN_EIM_CS2, IOMUX_CONFIG_ALT1);
|
|
/* FEC_RXD3 - sel GPIO (2-28) for configuration -> 0 */
|
|
mxc_request_iomux(MX51_PIN_EIM_CS3, IOMUX_CONFIG_ALT1);
|
|
/* FEC_RXER - sel GPIO (2-29) for configuration -> 0 */
|
|
mxc_request_iomux(MX51_PIN_EIM_CS4, IOMUX_CONFIG_ALT1);
|
|
/* FEC_COL - sel GPIO (3-10) for configuration -> 1 */
|
|
mxc_request_iomux(MX51_PIN_NANDF_RB2, IOMUX_CONFIG_ALT3);
|
|
/* FEC_RCLK - sel GPIO (3-11) for configuration -> 0 */
|
|
mxc_request_iomux(MX51_PIN_NANDF_RB3, IOMUX_CONFIG_ALT3);
|
|
/* FEC_RXD0 - sel GPIO (3-31) for configuration -> 1 */
|
|
mxc_request_iomux(MX51_PIN_NANDF_D9, IOMUX_CONFIG_ALT3);
|
|
#endif
|
|
|
|
/*
|
|
* activate reset_n pin
|
|
* Select mux mode: ALT3 mux port: NAND D15
|
|
*/
|
|
mxc_request_iomux(MX51_PIN_NANDF_D15, IOMUX_CONFIG_ALT3);
|
|
mxc_iomux_set_pad(MX51_PIN_NANDF_D15,
|
|
PAD_CTL_DRV_VOT_HIGH | PAD_CTL_DRV_MAX);
|
|
} else {
|
|
/* set FEC Control lines */
|
|
gpio_direction_input(89);
|
|
udelay(500);
|
|
|
|
#ifdef CONFIG_VISION2_HW_1_0
|
|
/* FEC RDATA[3] */
|
|
mxc_request_iomux(MX51_PIN_EIM_CS3, IOMUX_CONFIG_ALT3);
|
|
mxc_iomux_set_pad(MX51_PIN_EIM_CS3, 0x180);
|
|
|
|
/* FEC RDATA[2] */
|
|
mxc_request_iomux(MX51_PIN_EIM_CS2, IOMUX_CONFIG_ALT3);
|
|
mxc_iomux_set_pad(MX51_PIN_EIM_CS2, 0x180);
|
|
|
|
/* FEC RDATA[1] */
|
|
mxc_request_iomux(MX51_PIN_EIM_EB3, IOMUX_CONFIG_ALT3);
|
|
mxc_iomux_set_pad(MX51_PIN_EIM_EB3, 0x180);
|
|
|
|
/* FEC RDATA[0] */
|
|
mxc_request_iomux(MX51_PIN_NANDF_D9, IOMUX_CONFIG_ALT2);
|
|
mxc_iomux_set_pad(MX51_PIN_NANDF_D9, 0x2180);
|
|
|
|
/* FEC RX_CLK */
|
|
mxc_request_iomux(MX51_PIN_NANDF_RB3, IOMUX_CONFIG_ALT1);
|
|
mxc_iomux_set_pad(MX51_PIN_NANDF_RB3, 0x2180);
|
|
|
|
/* FEC RX_ER */
|
|
mxc_request_iomux(MX51_PIN_EIM_CS4, IOMUX_CONFIG_ALT3);
|
|
mxc_iomux_set_pad(MX51_PIN_EIM_CS4, 0x180);
|
|
|
|
/* FEC COL */
|
|
mxc_request_iomux(MX51_PIN_NANDF_RB2, IOMUX_CONFIG_ALT1);
|
|
mxc_iomux_set_pad(MX51_PIN_NANDF_RB2, 0x2180);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
static void power_init_mx51(void)
|
|
{
|
|
unsigned int val;
|
|
struct pmic *p;
|
|
|
|
pmic_init();
|
|
p = get_pmic();
|
|
|
|
/* Write needed to Power Gate 2 register */
|
|
pmic_reg_read(p, REG_POWER_MISC, &val);
|
|
|
|
/* enable VCAM with 2.775V to enable read from PMIC */
|
|
val = VCAMCONFIG | VCAMEN;
|
|
pmic_reg_write(p, REG_MODE_1, val);
|
|
|
|
/*
|
|
* Set switchers in Auto in NORMAL mode & STANDBY mode
|
|
* Setup the switcher mode for SW1 & SW2
|
|
*/
|
|
pmic_reg_read(p, REG_SW_4, &val);
|
|
val = (val & ~((SWMODE_MASK << SWMODE1_SHIFT) |
|
|
(SWMODE_MASK << SWMODE2_SHIFT)));
|
|
val |= (SWMODE_AUTO_AUTO << SWMODE1_SHIFT) |
|
|
(SWMODE_AUTO_AUTO << SWMODE2_SHIFT);
|
|
pmic_reg_write(p, REG_SW_4, val);
|
|
|
|
/* Setup the switcher mode for SW3 & SW4 */
|
|
pmic_reg_read(p, REG_SW_5, &val);
|
|
val &= ~((SWMODE_MASK << SWMODE4_SHIFT) |
|
|
(SWMODE_MASK << SWMODE3_SHIFT));
|
|
val |= (SWMODE_AUTO_AUTO << SWMODE4_SHIFT) |
|
|
(SWMODE_AUTO_AUTO << SWMODE3_SHIFT);
|
|
pmic_reg_write(p, REG_SW_5, val);
|
|
|
|
|
|
/* Set VGEN3 to 1.8V, VCAM to 3.0V */
|
|
pmic_reg_read(p, REG_SETTING_0, &val);
|
|
val &= ~(VCAM_MASK | VGEN3_MASK);
|
|
val |= VCAM_3_0;
|
|
pmic_reg_write(p, REG_SETTING_0, val);
|
|
|
|
/* Set VVIDEO to 2.775V, VAUDIO to 3V0, VSD to 1.8V */
|
|
pmic_reg_read(p, REG_SETTING_1, &val);
|
|
val &= ~(VVIDEO_MASK | VSD_MASK | VAUDIO_MASK);
|
|
val |= VVIDEO_2_775 | VAUDIO_3_0 | VSD_1_8;
|
|
pmic_reg_write(p, REG_SETTING_1, val);
|
|
|
|
/* Configure VGEN3 and VCAM regulators to use external PNP */
|
|
val = VGEN3CONFIG | VCAMCONFIG;
|
|
pmic_reg_write(p, REG_MODE_1, val);
|
|
udelay(200);
|
|
|
|
/* Enable VGEN3, VCAM, VAUDIO, VVIDEO, VSD regulators */
|
|
val = VGEN3EN | VGEN3CONFIG | VCAMEN | VCAMCONFIG |
|
|
VVIDEOEN | VAUDIOEN | VSDEN;
|
|
pmic_reg_write(p, REG_MODE_1, val);
|
|
|
|
pmic_reg_read(p, REG_POWER_CTL2, &val);
|
|
val |= WDIRESET;
|
|
pmic_reg_write(p, REG_POWER_CTL2, val);
|
|
|
|
udelay(2500);
|
|
|
|
}
|
|
#endif
|
|
|
|
static void setup_gpios(void)
|
|
{
|
|
unsigned int i;
|
|
|
|
/* CAM_SUP_DISn, GPIO1_7 */
|
|
mxc_request_iomux(MX51_PIN_GPIO1_7, IOMUX_CONFIG_ALT0);
|
|
mxc_iomux_set_pad(MX51_PIN_GPIO1_7, 0x82);
|
|
|
|
/* DAB Display EN, GPIO3_1 */
|
|
mxc_request_iomux(MX51_PIN_DI1_PIN12, IOMUX_CONFIG_ALT4);
|
|
mxc_iomux_set_pad(MX51_PIN_DI1_PIN12, 0x82);
|
|
|
|
/* WDOG_TRIGGER, GPIO3_2 */
|
|
mxc_request_iomux(MX51_PIN_DI1_PIN13, IOMUX_CONFIG_ALT4);
|
|
mxc_iomux_set_pad(MX51_PIN_DI1_PIN13, 0x82);
|
|
|
|
/* Now we need to trigger the watchdog */
|
|
WATCHDOG_RESET();
|
|
|
|
/* Display2 TxEN, GPIO3_3 */
|
|
mxc_request_iomux(MX51_PIN_DI1_D0_CS, IOMUX_CONFIG_ALT4);
|
|
mxc_iomux_set_pad(MX51_PIN_DI1_D0_CS, 0x82);
|
|
|
|
/* DAB Light EN, GPIO3_4 */
|
|
mxc_request_iomux(MX51_PIN_DI1_D1_CS, IOMUX_CONFIG_ALT4);
|
|
mxc_iomux_set_pad(MX51_PIN_DI1_D1_CS, 0x82);
|
|
|
|
/* AUDIO_MUTE, GPIO3_5 */
|
|
mxc_request_iomux(MX51_PIN_DISPB2_SER_DIN, IOMUX_CONFIG_ALT4);
|
|
mxc_iomux_set_pad(MX51_PIN_DISPB2_SER_DIN, 0x82);
|
|
|
|
/* SPARE_OUT, GPIO3_6 */
|
|
mxc_request_iomux(MX51_PIN_DISPB2_SER_DIO, IOMUX_CONFIG_ALT4);
|
|
mxc_iomux_set_pad(MX51_PIN_DISPB2_SER_DIO, 0x82);
|
|
|
|
/* BEEPER_EN, GPIO3_26 */
|
|
mxc_request_iomux(MX51_PIN_NANDF_D14, IOMUX_CONFIG_ALT3);
|
|
mxc_iomux_set_pad(MX51_PIN_NANDF_D14, 0x82);
|
|
|
|
/* POWER_OFF, GPIO3_27 */
|
|
mxc_request_iomux(MX51_PIN_NANDF_D13, IOMUX_CONFIG_ALT3);
|
|
mxc_iomux_set_pad(MX51_PIN_NANDF_D13, 0x82);
|
|
|
|
/* FRAM_WE, GPIO3_30 */
|
|
mxc_request_iomux(MX51_PIN_NANDF_D10, IOMUX_CONFIG_ALT3);
|
|
mxc_iomux_set_pad(MX51_PIN_NANDF_D10, 0x82);
|
|
|
|
/* EXPANSION_EN, GPIO4_26 */
|
|
mxc_request_iomux(MX51_PIN_CSPI1_RDY, IOMUX_CONFIG_ALT3);
|
|
mxc_iomux_set_pad(MX51_PIN_CSPI1_RDY, 0x82);
|
|
|
|
/* PWM Output GPIO1_2 */
|
|
mxc_request_iomux(MX51_PIN_GPIO1_2, IOMUX_CONFIG_ALT1);
|
|
|
|
/*
|
|
* Set GPIO1_4 to high and output; it is used to reset
|
|
* the system on reboot
|
|
*/
|
|
gpio_direction_output(4, 1);
|
|
|
|
gpio_direction_output(7, 0);
|
|
for (i = 65; i < 71; i++)
|
|
gpio_direction_output(i, 0);
|
|
|
|
gpio_direction_output(94, 0);
|
|
|
|
/* Set POWER_OFF high */
|
|
gpio_direction_output(91, 1);
|
|
|
|
gpio_direction_output(90, 0);
|
|
|
|
gpio_direction_output(122, 0);
|
|
|
|
gpio_direction_output(121, 1);
|
|
|
|
WATCHDOG_RESET();
|
|
}
|
|
|
|
static void setup_fec(void)
|
|
{
|
|
/*FEC_MDIO*/
|
|
mxc_request_iomux(MX51_PIN_EIM_EB2, IOMUX_CONFIG_ALT3);
|
|
mxc_iomux_set_pad(MX51_PIN_EIM_EB2, 0x1FD);
|
|
|
|
/*FEC_MDC*/
|
|
mxc_request_iomux(MX51_PIN_NANDF_CS3, IOMUX_CONFIG_ALT2);
|
|
mxc_iomux_set_pad(MX51_PIN_NANDF_CS3, 0x2004);
|
|
|
|
/* FEC RDATA[3] */
|
|
mxc_request_iomux(MX51_PIN_EIM_CS3, IOMUX_CONFIG_ALT3);
|
|
mxc_iomux_set_pad(MX51_PIN_EIM_CS3, 0x180);
|
|
|
|
/* FEC RDATA[2] */
|
|
mxc_request_iomux(MX51_PIN_EIM_CS2, IOMUX_CONFIG_ALT3);
|
|
mxc_iomux_set_pad(MX51_PIN_EIM_CS2, 0x180);
|
|
|
|
/* FEC RDATA[1] */
|
|
mxc_request_iomux(MX51_PIN_EIM_EB3, IOMUX_CONFIG_ALT3);
|
|
mxc_iomux_set_pad(MX51_PIN_EIM_EB3, 0x180);
|
|
|
|
/* FEC RDATA[0] */
|
|
mxc_request_iomux(MX51_PIN_NANDF_D9, IOMUX_CONFIG_ALT2);
|
|
mxc_iomux_set_pad(MX51_PIN_NANDF_D9, 0x2180);
|
|
|
|
/* FEC TDATA[3] */
|
|
mxc_request_iomux(MX51_PIN_NANDF_CS6, IOMUX_CONFIG_ALT2);
|
|
mxc_iomux_set_pad(MX51_PIN_NANDF_CS6, 0x2004);
|
|
|
|
/* FEC TDATA[2] */
|
|
mxc_request_iomux(MX51_PIN_NANDF_CS5, IOMUX_CONFIG_ALT2);
|
|
mxc_iomux_set_pad(MX51_PIN_NANDF_CS5, 0x2004);
|
|
|
|
/* FEC TDATA[1] */
|
|
mxc_request_iomux(MX51_PIN_NANDF_CS4, IOMUX_CONFIG_ALT2);
|
|
mxc_iomux_set_pad(MX51_PIN_NANDF_CS4, 0x2004);
|
|
|
|
/* FEC TDATA[0] */
|
|
mxc_request_iomux(MX51_PIN_NANDF_D8, IOMUX_CONFIG_ALT2);
|
|
mxc_iomux_set_pad(MX51_PIN_NANDF_D8, 0x2004);
|
|
|
|
/* FEC TX_EN */
|
|
mxc_request_iomux(MX51_PIN_NANDF_CS7, IOMUX_CONFIG_ALT1);
|
|
mxc_iomux_set_pad(MX51_PIN_NANDF_CS7, 0x2004);
|
|
|
|
/* FEC TX_ER */
|
|
mxc_request_iomux(MX51_PIN_NANDF_CS2, IOMUX_CONFIG_ALT2);
|
|
mxc_iomux_set_pad(MX51_PIN_NANDF_CS2, 0x2004);
|
|
|
|
/* FEC TX_CLK */
|
|
mxc_request_iomux(MX51_PIN_NANDF_RDY_INT, IOMUX_CONFIG_ALT1);
|
|
mxc_iomux_set_pad(MX51_PIN_NANDF_RDY_INT, 0x2180);
|
|
|
|
/* FEC TX_COL */
|
|
mxc_request_iomux(MX51_PIN_NANDF_RB2, IOMUX_CONFIG_ALT1);
|
|
mxc_iomux_set_pad(MX51_PIN_NANDF_RB2, 0x2180);
|
|
|
|
/* FEC RX_CLK */
|
|
mxc_request_iomux(MX51_PIN_NANDF_RB3, IOMUX_CONFIG_ALT1);
|
|
mxc_iomux_set_pad(MX51_PIN_NANDF_RB3, 0x2180);
|
|
|
|
/* FEC RX_CRS */
|
|
mxc_request_iomux(MX51_PIN_EIM_CS5, IOMUX_CONFIG_ALT3);
|
|
mxc_iomux_set_pad(MX51_PIN_EIM_CS5, 0x180);
|
|
|
|
/* FEC RX_ER */
|
|
mxc_request_iomux(MX51_PIN_EIM_CS4, IOMUX_CONFIG_ALT3);
|
|
mxc_iomux_set_pad(MX51_PIN_EIM_CS4, 0x180);
|
|
|
|
/* FEC RX_DV */
|
|
mxc_request_iomux(MX51_PIN_NANDF_D11, IOMUX_CONFIG_ALT2);
|
|
mxc_iomux_set_pad(MX51_PIN_NANDF_D11, 0x2180);
|
|
}
|
|
|
|
struct fsl_esdhc_cfg esdhc_cfg[1] = {
|
|
{MMC_SDHC1_BASE_ADDR, 1},
|
|
};
|
|
|
|
int get_mmc_getcd(u8 *cd, struct mmc *mmc)
|
|
{
|
|
struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
|
|
|
|
if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
|
|
*cd = gpio_get_value(0);
|
|
else
|
|
*cd = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_FSL_ESDHC
|
|
int board_mmc_init(bd_t *bis)
|
|
{
|
|
mxc_request_iomux(MX51_PIN_SD1_CMD,
|
|
IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
|
|
mxc_request_iomux(MX51_PIN_SD1_CLK,
|
|
IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
|
|
mxc_request_iomux(MX51_PIN_SD1_DATA0,
|
|
IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
|
|
mxc_request_iomux(MX51_PIN_SD1_DATA1,
|
|
IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
|
|
mxc_request_iomux(MX51_PIN_SD1_DATA2,
|
|
IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
|
|
mxc_request_iomux(MX51_PIN_SD1_DATA3,
|
|
IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
|
|
mxc_iomux_set_pad(MX51_PIN_SD1_CMD,
|
|
PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
|
|
PAD_CTL_PUE_PULL |
|
|
PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
|
|
mxc_iomux_set_pad(MX51_PIN_SD1_CLK,
|
|
PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
|
|
PAD_CTL_HYS_NONE | PAD_CTL_47K_PU |
|
|
PAD_CTL_PUE_PULL |
|
|
PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
|
|
mxc_iomux_set_pad(MX51_PIN_SD1_DATA0,
|
|
PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
|
|
PAD_CTL_PUE_PULL |
|
|
PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
|
|
mxc_iomux_set_pad(MX51_PIN_SD1_DATA1,
|
|
PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
|
|
PAD_CTL_PUE_PULL |
|
|
PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
|
|
mxc_iomux_set_pad(MX51_PIN_SD1_DATA2,
|
|
PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
|
|
PAD_CTL_PUE_PULL |
|
|
PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
|
|
mxc_iomux_set_pad(MX51_PIN_SD1_DATA3,
|
|
PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PD |
|
|
PAD_CTL_PUE_PULL |
|
|
PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
|
|
mxc_request_iomux(MX51_PIN_GPIO1_0,
|
|
IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
|
|
mxc_iomux_set_pad(MX51_PIN_GPIO1_0,
|
|
PAD_CTL_HYS_ENABLE);
|
|
mxc_request_iomux(MX51_PIN_GPIO1_1,
|
|
IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
|
|
mxc_iomux_set_pad(MX51_PIN_GPIO1_1,
|
|
PAD_CTL_HYS_ENABLE);
|
|
|
|
return fsl_esdhc_initialize(bis, &esdhc_cfg[0]);
|
|
}
|
|
#endif
|
|
|
|
void lcd_enable(void)
|
|
{
|
|
int ret;
|
|
|
|
mxc_request_iomux(MX51_PIN_DI1_PIN2, IOMUX_CONFIG_ALT0);
|
|
mxc_request_iomux(MX51_PIN_DI1_PIN3, IOMUX_CONFIG_ALT0);
|
|
|
|
gpio_set_value(2, 1);
|
|
mxc_request_iomux(MX51_PIN_GPIO1_2, IOMUX_CONFIG_ALT0);
|
|
|
|
ret = ipuv3_fb_init(&nec_nl6448bc26_09c, 0, IPU_PIX_FMT_RGB666);
|
|
if (ret)
|
|
puts("LCD cannot be configured\n");
|
|
}
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
|
|
|
|
init_drive_strength();
|
|
|
|
/* Setup debug led */
|
|
gpio_direction_output(6, 0);
|
|
mxc_request_iomux(MX51_PIN_GPIO1_6, IOMUX_CONFIG_ALT0);
|
|
mxc_iomux_set_pad(MX51_PIN_GPIO1_6, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
|
|
|
|
/* wait a little while to give the pll time to settle */
|
|
sdelay(100000);
|
|
|
|
setup_weim();
|
|
setup_uart();
|
|
setup_fec();
|
|
setup_gpios();
|
|
|
|
spi_io_init();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void backlight(int on)
|
|
{
|
|
if (on) {
|
|
gpio_set_value(65, 1);
|
|
udelay(10000);
|
|
gpio_set_value(68, 1);
|
|
} else {
|
|
gpio_set_value(65, 0);
|
|
gpio_set_value(68, 0);
|
|
}
|
|
}
|
|
|
|
int board_init(void)
|
|
{
|
|
/* address of boot parameters */
|
|
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
|
|
|
|
lcd_enable();
|
|
|
|
backlight(1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_late_init(void)
|
|
{
|
|
power_init_mx51();
|
|
|
|
reset_peripherals(1);
|
|
udelay(2000);
|
|
reset_peripherals(0);
|
|
udelay(2000);
|
|
|
|
/* Early revisions require a second reset */
|
|
#ifdef CONFIG_VISION2_HW_1_0
|
|
reset_peripherals(1);
|
|
udelay(2000);
|
|
reset_peripherals(0);
|
|
udelay(2000);
|
|
#endif
|
|
|
|
setenv("stdout", "serial");
|
|
|
|
return 0;
|
|
}
|
|
|
|
int checkboard(void)
|
|
{
|
|
puts("Board: TTControl Vision II CPU V\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
int do_vision_lcd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
int on;
|
|
|
|
if (argc < 2)
|
|
return cmd_usage(cmdtp);
|
|
|
|
on = (strcmp(argv[1], "on") == 0);
|
|
backlight(on);
|
|
|
|
return 0;
|
|
}
|
|
|
|
U_BOOT_CMD(
|
|
lcdbl, CONFIG_SYS_MAXARGS, 1, do_vision_lcd,
|
|
"Vision2 Backlight",
|
|
"lcdbl [on|off]\n"
|
|
);
|
|
|