upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
527 lines
14 KiB
527 lines
14 KiB
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2011 CompuLab, Ltd. <www.compulab.co.il>
|
|
*
|
|
* Authors: Nikita Kiryanov <nikita@compulab.co.il>
|
|
* Igor Grinberg <grinberg@compulab.co.il>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <i2c.h>
|
|
#include <eeprom_layout.h>
|
|
#include <eeprom_field.h>
|
|
#include <asm/setup.h>
|
|
#include <linux/kernel.h>
|
|
#include "eeprom.h"
|
|
|
|
#ifndef CONFIG_SYS_I2C_EEPROM_ADDR
|
|
# define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
|
|
# define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
|
|
#endif
|
|
|
|
#ifndef CONFIG_SYS_I2C_EEPROM_BUS
|
|
#define CONFIG_SYS_I2C_EEPROM_BUS 0
|
|
#endif
|
|
|
|
#define EEPROM_LAYOUT_VER_OFFSET 44
|
|
#define BOARD_SERIAL_OFFSET 20
|
|
#define BOARD_SERIAL_OFFSET_LEGACY 8
|
|
#define BOARD_REV_OFFSET 0
|
|
#define BOARD_REV_OFFSET_LEGACY 6
|
|
#define BOARD_REV_SIZE 2
|
|
#define PRODUCT_NAME_OFFSET 128
|
|
#define PRODUCT_NAME_SIZE 16
|
|
#define MAC_ADDR_OFFSET 4
|
|
#define MAC_ADDR_OFFSET_LEGACY 0
|
|
|
|
#define LAYOUT_INVALID 0
|
|
#define LAYOUT_LEGACY 0xff
|
|
|
|
static int cl_eeprom_bus;
|
|
static int cl_eeprom_layout; /* Implicitly LAYOUT_INVALID */
|
|
|
|
static int cl_eeprom_read(uint offset, uchar *buf, int len)
|
|
{
|
|
int res;
|
|
unsigned int current_i2c_bus = i2c_get_bus_num();
|
|
|
|
res = i2c_set_bus_num(cl_eeprom_bus);
|
|
if (res < 0)
|
|
return res;
|
|
|
|
res = i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, offset,
|
|
CONFIG_SYS_I2C_EEPROM_ADDR_LEN, buf, len);
|
|
|
|
i2c_set_bus_num(current_i2c_bus);
|
|
|
|
return res;
|
|
}
|
|
|
|
static int cl_eeprom_setup(uint eeprom_bus)
|
|
{
|
|
int res;
|
|
|
|
/*
|
|
* We know the setup was already done when the layout is set to a valid
|
|
* value and we're using the same bus as before.
|
|
*/
|
|
if (cl_eeprom_layout != LAYOUT_INVALID && eeprom_bus == cl_eeprom_bus)
|
|
return 0;
|
|
|
|
cl_eeprom_bus = eeprom_bus;
|
|
res = cl_eeprom_read(EEPROM_LAYOUT_VER_OFFSET,
|
|
(uchar *)&cl_eeprom_layout, 1);
|
|
if (res) {
|
|
cl_eeprom_layout = LAYOUT_INVALID;
|
|
return res;
|
|
}
|
|
|
|
if (cl_eeprom_layout == 0 || cl_eeprom_layout >= 0x20)
|
|
cl_eeprom_layout = LAYOUT_LEGACY;
|
|
|
|
return 0;
|
|
}
|
|
|
|
void get_board_serial(struct tag_serialnr *serialnr)
|
|
{
|
|
u32 serial[2];
|
|
uint offset;
|
|
|
|
memset(serialnr, 0, sizeof(*serialnr));
|
|
|
|
if (cl_eeprom_setup(CONFIG_SYS_I2C_EEPROM_BUS))
|
|
return;
|
|
|
|
offset = (cl_eeprom_layout != LAYOUT_LEGACY) ?
|
|
BOARD_SERIAL_OFFSET : BOARD_SERIAL_OFFSET_LEGACY;
|
|
|
|
if (cl_eeprom_read(offset, (uchar *)serial, 8))
|
|
return;
|
|
|
|
if (serial[0] != 0xffffffff && serial[1] != 0xffffffff) {
|
|
serialnr->low = serial[0];
|
|
serialnr->high = serial[1];
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Routine: cl_eeprom_read_mac_addr
|
|
* Description: read mac address and store it in buf.
|
|
*/
|
|
int cl_eeprom_read_mac_addr(uchar *buf, uint eeprom_bus)
|
|
{
|
|
uint offset;
|
|
int err;
|
|
|
|
err = cl_eeprom_setup(eeprom_bus);
|
|
if (err)
|
|
return err;
|
|
|
|
offset = (cl_eeprom_layout != LAYOUT_LEGACY) ?
|
|
MAC_ADDR_OFFSET : MAC_ADDR_OFFSET_LEGACY;
|
|
|
|
return cl_eeprom_read(offset, buf, 6);
|
|
}
|
|
|
|
static u32 board_rev;
|
|
|
|
/*
|
|
* Routine: cl_eeprom_get_board_rev
|
|
* Description: read system revision from eeprom
|
|
*/
|
|
u32 cl_eeprom_get_board_rev(uint eeprom_bus)
|
|
{
|
|
char str[5]; /* Legacy representation can contain at most 4 digits */
|
|
uint offset = BOARD_REV_OFFSET_LEGACY;
|
|
|
|
if (board_rev)
|
|
return board_rev;
|
|
|
|
if (cl_eeprom_setup(eeprom_bus))
|
|
return 0;
|
|
|
|
if (cl_eeprom_layout != LAYOUT_LEGACY)
|
|
offset = BOARD_REV_OFFSET;
|
|
|
|
if (cl_eeprom_read(offset, (uchar *)&board_rev, BOARD_REV_SIZE))
|
|
return 0;
|
|
|
|
/*
|
|
* Convert legacy syntactic representation to semantic
|
|
* representation. i.e. for rev 1.00: 0x100 --> 0x64
|
|
*/
|
|
if (cl_eeprom_layout == LAYOUT_LEGACY) {
|
|
sprintf(str, "%x", board_rev);
|
|
board_rev = simple_strtoul(str, NULL, 10);
|
|
}
|
|
|
|
return board_rev;
|
|
};
|
|
|
|
/*
|
|
* Routine: cl_eeprom_get_board_rev
|
|
* Description: read system revision from eeprom
|
|
*
|
|
* @buf: buffer to store the product name
|
|
* @eeprom_bus: i2c bus num of the eeprom
|
|
*
|
|
* @return: 0 on success, < 0 on failure
|
|
*/
|
|
int cl_eeprom_get_product_name(uchar *buf, uint eeprom_bus)
|
|
{
|
|
int err;
|
|
|
|
if (buf == NULL)
|
|
return -EINVAL;
|
|
|
|
err = cl_eeprom_setup(eeprom_bus);
|
|
if (err)
|
|
return err;
|
|
|
|
err = cl_eeprom_read(PRODUCT_NAME_OFFSET, buf, PRODUCT_NAME_SIZE);
|
|
if (!err) /* Protect ourselves from invalid data (unterminated str) */
|
|
buf[PRODUCT_NAME_SIZE - 1] = '\0';
|
|
|
|
return err;
|
|
}
|
|
|
|
#ifdef CONFIG_CMD_EEPROM_LAYOUT
|
|
/**
|
|
* eeprom_field_print_bin_ver() - print a "version field" which contains binary
|
|
* data
|
|
*
|
|
* Treat the field data as simple binary data, and print it formatted as a
|
|
* version number (2 digits after decimal point).
|
|
* The field size must be exactly 2 bytes.
|
|
*
|
|
* Sample output:
|
|
* Field Name 123.45
|
|
*
|
|
* @field: an initialized field to print
|
|
*/
|
|
void eeprom_field_print_bin_ver(const struct eeprom_field *field)
|
|
{
|
|
if ((field->buf[0] == 0xff) && (field->buf[1] == 0xff)) {
|
|
field->buf[0] = 0;
|
|
field->buf[1] = 0;
|
|
}
|
|
|
|
printf(PRINT_FIELD_SEGMENT, field->name);
|
|
int major = (field->buf[1] << 8 | field->buf[0]) / 100;
|
|
int minor = (field->buf[1] << 8 | field->buf[0]) - major * 100;
|
|
printf("%d.%02d\n", major, minor);
|
|
}
|
|
|
|
/**
|
|
* eeprom_field_update_bin_ver() - update a "version field" which contains
|
|
* binary data
|
|
*
|
|
* This function takes a version string in the form of x.y (x and y are both
|
|
* decimal values, y is limited to two digits), translates it to the binary
|
|
* form, then writes it to the field. The field size must be exactly 2 bytes.
|
|
*
|
|
* This function strictly enforces the data syntax, and will not update the
|
|
* field if there's any deviation from it. It also protects from overflow.
|
|
*
|
|
* @field: an initialized field
|
|
* @value: a version string
|
|
*
|
|
* Returns 0 on success, -1 on failure.
|
|
*/
|
|
int eeprom_field_update_bin_ver(struct eeprom_field *field, char *value)
|
|
{
|
|
char *endptr;
|
|
char *tok = strtok(value, ".");
|
|
if (tok == NULL)
|
|
return -1;
|
|
|
|
int num = simple_strtol(tok, &endptr, 0);
|
|
if (*endptr != '\0')
|
|
return -1;
|
|
|
|
tok = strtok(NULL, "");
|
|
if (tok == NULL)
|
|
return -1;
|
|
|
|
int remainder = simple_strtol(tok, &endptr, 0);
|
|
if (*endptr != '\0')
|
|
return -1;
|
|
|
|
num = num * 100 + remainder;
|
|
if (num >> 16)
|
|
return -1;
|
|
|
|
field->buf[0] = (unsigned char)num;
|
|
field->buf[1] = num >> 8;
|
|
|
|
return 0;
|
|
}
|
|
|
|
char *months[12] = {"Jan", "Feb", "Mar", "Apr", "May", "Jun",
|
|
"Jul", "Aug", "Sep", "Oct", "Nov", "Dec"};
|
|
|
|
/**
|
|
* eeprom_field_print_date() - print a field which contains date data
|
|
*
|
|
* Treat the field data as simple binary data, and print it formatted as a date.
|
|
* Sample output:
|
|
* Field Name 07/Feb/2014
|
|
* Field Name 56/BAD/9999
|
|
*
|
|
* @field: an initialized field to print
|
|
*/
|
|
void eeprom_field_print_date(const struct eeprom_field *field)
|
|
{
|
|
printf(PRINT_FIELD_SEGMENT, field->name);
|
|
printf("%02d/", field->buf[0]);
|
|
if (field->buf[1] >= 1 && field->buf[1] <= 12)
|
|
printf("%s", months[field->buf[1] - 1]);
|
|
else
|
|
printf("BAD");
|
|
|
|
printf("/%d\n", field->buf[3] << 8 | field->buf[2]);
|
|
}
|
|
|
|
static int validate_date(unsigned char day, unsigned char month,
|
|
unsigned int year)
|
|
{
|
|
int days_in_february;
|
|
|
|
switch (month) {
|
|
case 0:
|
|
case 2:
|
|
case 4:
|
|
case 6:
|
|
case 7:
|
|
case 9:
|
|
case 11:
|
|
if (day > 31)
|
|
return -1;
|
|
break;
|
|
case 3:
|
|
case 5:
|
|
case 8:
|
|
case 10:
|
|
if (day > 30)
|
|
return -1;
|
|
break;
|
|
case 1:
|
|
days_in_february = 28;
|
|
if (year % 4 == 0) {
|
|
if (year % 100 != 0)
|
|
days_in_february = 29;
|
|
else if (year % 400 == 0)
|
|
days_in_february = 29;
|
|
}
|
|
|
|
if (day > days_in_february)
|
|
return -1;
|
|
|
|
break;
|
|
default:
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* eeprom_field_update_date() - update a date field which contains binary data
|
|
*
|
|
* This function takes a date string in the form of x/Mon/y (x and y are both
|
|
* decimal values), translates it to the binary representation, then writes it
|
|
* to the field.
|
|
*
|
|
* This function strictly enforces the data syntax, and will not update the
|
|
* field if there's any deviation from it. It also protects from overflow in the
|
|
* year value, and checks the validity of the date.
|
|
*
|
|
* @field: an initialized field
|
|
* @value: a date string
|
|
*
|
|
* Returns 0 on success, -1 on failure.
|
|
*/
|
|
int eeprom_field_update_date(struct eeprom_field *field, char *value)
|
|
{
|
|
char *endptr;
|
|
char *tok1 = strtok(value, "/");
|
|
char *tok2 = strtok(NULL, "/");
|
|
char *tok3 = strtok(NULL, "/");
|
|
|
|
if (tok1 == NULL || tok2 == NULL || tok3 == NULL) {
|
|
printf("%s: syntax error\n", field->name);
|
|
return -1;
|
|
}
|
|
|
|
unsigned char day = (unsigned char)simple_strtol(tok1, &endptr, 0);
|
|
if (*endptr != '\0' || day == 0) {
|
|
printf("%s: invalid day\n", field->name);
|
|
return -1;
|
|
}
|
|
|
|
unsigned char month;
|
|
for (month = 1; month <= 12; month++)
|
|
if (!strcmp(tok2, months[month - 1]))
|
|
break;
|
|
|
|
unsigned int year = simple_strtol(tok3, &endptr, 0);
|
|
if (*endptr != '\0') {
|
|
printf("%s: invalid year\n", field->name);
|
|
return -1;
|
|
}
|
|
|
|
if (validate_date(day, month - 1, year)) {
|
|
printf("%s: invalid date\n", field->name);
|
|
return -1;
|
|
}
|
|
|
|
if (year >> 16) {
|
|
printf("%s: year overflow\n", field->name);
|
|
return -1;
|
|
}
|
|
|
|
field->buf[0] = day;
|
|
field->buf[1] = month;
|
|
field->buf[2] = (unsigned char)year;
|
|
field->buf[3] = (unsigned char)(year >> 8);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define LAYOUT_VERSION_LEGACY 1
|
|
#define LAYOUT_VERSION_VER1 2
|
|
#define LAYOUT_VERSION_VER2 3
|
|
#define LAYOUT_VERSION_VER3 4
|
|
|
|
extern struct eeprom_field layout_unknown[1];
|
|
|
|
#define DEFINE_PRINT_UPDATE(x) eeprom_field_print_##x, eeprom_field_update_##x
|
|
|
|
#ifdef CONFIG_CM_T3X
|
|
struct eeprom_field layout_legacy[5] = {
|
|
{ "MAC address", 6, NULL, DEFINE_PRINT_UPDATE(mac) },
|
|
{ "Board Revision", 2, NULL, DEFINE_PRINT_UPDATE(bin) },
|
|
{ "Serial Number", 8, NULL, DEFINE_PRINT_UPDATE(bin) },
|
|
{ "Board Configuration", 64, NULL, DEFINE_PRINT_UPDATE(ascii) },
|
|
{ RESERVED_FIELDS, 176, NULL, eeprom_field_print_reserved,
|
|
eeprom_field_update_ascii },
|
|
};
|
|
#else
|
|
#define layout_legacy layout_unknown
|
|
#endif
|
|
|
|
#if defined(CONFIG_CM_T3X) || defined(CONFIG_CM_T3517)
|
|
struct eeprom_field layout_v1[12] = {
|
|
{ "Major Revision", 2, NULL, DEFINE_PRINT_UPDATE(bin_ver) },
|
|
{ "Minor Revision", 2, NULL, DEFINE_PRINT_UPDATE(bin_ver) },
|
|
{ "1st MAC Address", 6, NULL, DEFINE_PRINT_UPDATE(mac) },
|
|
{ "2nd MAC Address", 6, NULL, DEFINE_PRINT_UPDATE(mac) },
|
|
{ "Production Date", 4, NULL, DEFINE_PRINT_UPDATE(date) },
|
|
{ "Serial Number", 12, NULL, DEFINE_PRINT_UPDATE(bin_rev) },
|
|
{ RESERVED_FIELDS, 96, NULL, DEFINE_PRINT_UPDATE(reserved) },
|
|
{ "Product Name", 16, NULL, DEFINE_PRINT_UPDATE(ascii) },
|
|
{ "Product Options #1", 16, NULL, DEFINE_PRINT_UPDATE(ascii) },
|
|
{ "Product Options #2", 16, NULL, DEFINE_PRINT_UPDATE(ascii) },
|
|
{ "Product Options #3", 16, NULL, DEFINE_PRINT_UPDATE(ascii) },
|
|
{ RESERVED_FIELDS, 64, NULL, eeprom_field_print_reserved,
|
|
eeprom_field_update_ascii },
|
|
};
|
|
#else
|
|
#define layout_v1 layout_unknown
|
|
#endif
|
|
|
|
struct eeprom_field layout_v2[15] = {
|
|
{ "Major Revision", 2, NULL, DEFINE_PRINT_UPDATE(bin_ver) },
|
|
{ "Minor Revision", 2, NULL, DEFINE_PRINT_UPDATE(bin_ver) },
|
|
{ "1st MAC Address", 6, NULL, DEFINE_PRINT_UPDATE(mac) },
|
|
{ "2nd MAC Address", 6, NULL, DEFINE_PRINT_UPDATE(mac) },
|
|
{ "Production Date", 4, NULL, DEFINE_PRINT_UPDATE(date) },
|
|
{ "Serial Number", 12, NULL, DEFINE_PRINT_UPDATE(bin_rev) },
|
|
{ "3rd MAC Address (WIFI)", 6, NULL, DEFINE_PRINT_UPDATE(mac) },
|
|
{ "4th MAC Address (Bluetooth)", 6, NULL, DEFINE_PRINT_UPDATE(mac) },
|
|
{ "Layout Version", 1, NULL, DEFINE_PRINT_UPDATE(bin) },
|
|
{ RESERVED_FIELDS, 83, NULL, DEFINE_PRINT_UPDATE(reserved) },
|
|
{ "Product Name", 16, NULL, DEFINE_PRINT_UPDATE(ascii) },
|
|
{ "Product Options #1", 16, NULL, DEFINE_PRINT_UPDATE(ascii) },
|
|
{ "Product Options #2", 16, NULL, DEFINE_PRINT_UPDATE(ascii) },
|
|
{ "Product Options #3", 16, NULL, DEFINE_PRINT_UPDATE(ascii) },
|
|
{ RESERVED_FIELDS, 64, NULL, eeprom_field_print_reserved,
|
|
eeprom_field_update_ascii },
|
|
};
|
|
|
|
struct eeprom_field layout_v3[16] = {
|
|
{ "Major Revision", 2, NULL, DEFINE_PRINT_UPDATE(bin_ver) },
|
|
{ "Minor Revision", 2, NULL, DEFINE_PRINT_UPDATE(bin_ver) },
|
|
{ "1st MAC Address", 6, NULL, DEFINE_PRINT_UPDATE(mac) },
|
|
{ "2nd MAC Address", 6, NULL, DEFINE_PRINT_UPDATE(mac) },
|
|
{ "Production Date", 4, NULL, DEFINE_PRINT_UPDATE(date) },
|
|
{ "Serial Number", 12, NULL, DEFINE_PRINT_UPDATE(bin_rev) },
|
|
{ "3rd MAC Address (WIFI)", 6, NULL, DEFINE_PRINT_UPDATE(mac) },
|
|
{ "4th MAC Address (Bluetooth)", 6, NULL, DEFINE_PRINT_UPDATE(mac) },
|
|
{ "Layout Version", 1, NULL, DEFINE_PRINT_UPDATE(bin) },
|
|
{ "CompuLab EEPROM ID", 3, NULL, DEFINE_PRINT_UPDATE(bin) },
|
|
{ RESERVED_FIELDS, 80, NULL, DEFINE_PRINT_UPDATE(reserved) },
|
|
{ "Product Name", 16, NULL, DEFINE_PRINT_UPDATE(ascii) },
|
|
{ "Product Options #1", 16, NULL, DEFINE_PRINT_UPDATE(ascii) },
|
|
{ "Product Options #2", 16, NULL, DEFINE_PRINT_UPDATE(ascii) },
|
|
{ "Product Options #3", 16, NULL, DEFINE_PRINT_UPDATE(ascii) },
|
|
{ RESERVED_FIELDS, 64, NULL, eeprom_field_print_reserved,
|
|
eeprom_field_update_ascii },
|
|
};
|
|
|
|
void eeprom_layout_assign(struct eeprom_layout *layout, int layout_version)
|
|
{
|
|
switch (layout->layout_version) {
|
|
case LAYOUT_VERSION_LEGACY:
|
|
layout->fields = layout_legacy;
|
|
layout->num_of_fields = ARRAY_SIZE(layout_legacy);
|
|
break;
|
|
case LAYOUT_VERSION_VER1:
|
|
layout->fields = layout_v1;
|
|
layout->num_of_fields = ARRAY_SIZE(layout_v1);
|
|
break;
|
|
case LAYOUT_VERSION_VER2:
|
|
layout->fields = layout_v2;
|
|
layout->num_of_fields = ARRAY_SIZE(layout_v2);
|
|
break;
|
|
case LAYOUT_VERSION_VER3:
|
|
layout->fields = layout_v3;
|
|
layout->num_of_fields = ARRAY_SIZE(layout_v3);
|
|
break;
|
|
default:
|
|
__eeprom_layout_assign(layout, layout_version);
|
|
}
|
|
}
|
|
|
|
int eeprom_parse_layout_version(char *str)
|
|
{
|
|
if (!strcmp(str, "legacy"))
|
|
return LAYOUT_VERSION_LEGACY;
|
|
else if (!strcmp(str, "v1"))
|
|
return LAYOUT_VERSION_VER1;
|
|
else if (!strcmp(str, "v2"))
|
|
return LAYOUT_VERSION_VER2;
|
|
else if (!strcmp(str, "v3"))
|
|
return LAYOUT_VERSION_VER3;
|
|
else
|
|
return LAYOUT_VERSION_UNRECOGNIZED;
|
|
}
|
|
|
|
int eeprom_layout_detect(unsigned char *data)
|
|
{
|
|
switch (data[EEPROM_LAYOUT_VER_OFFSET]) {
|
|
case 0xff:
|
|
case 0:
|
|
return LAYOUT_VERSION_VER1;
|
|
case 2:
|
|
return LAYOUT_VERSION_VER2;
|
|
case 3:
|
|
return LAYOUT_VERSION_VER3;
|
|
}
|
|
|
|
if (data[EEPROM_LAYOUT_VER_OFFSET] >= 0x20)
|
|
return LAYOUT_VERSION_LEGACY;
|
|
|
|
return LAYOUT_VERSION_UNRECOGNIZED;
|
|
}
|
|
#endif
|
|
|