upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
125 lines
2.4 KiB
125 lines
2.4 KiB
/*
|
|
* armboot - Startup Code for SA1100 CPU
|
|
*
|
|
* Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
|
|
* Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
|
|
* Copyright (C) 2000 Wolfgang Denk <wd@denx.de>
|
|
* Copyright (c) 2001 Alex Züpke <azu@sysgo.de>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <asm-offsets.h>
|
|
#include <config.h>
|
|
|
|
/*
|
|
*************************************************************************
|
|
*
|
|
* Startup Code (reset vector)
|
|
*
|
|
* do important init only if we don't start from memory!
|
|
* relocate armboot to ram
|
|
* setup stack
|
|
* jump to second stage
|
|
*
|
|
*************************************************************************
|
|
*/
|
|
|
|
.globl reset
|
|
|
|
reset:
|
|
/*
|
|
* set the cpu to SVC32 mode
|
|
*/
|
|
mrs r0,cpsr
|
|
bic r0,r0,#0x1f
|
|
orr r0,r0,#0xd3
|
|
msr cpsr,r0
|
|
|
|
/*
|
|
* we do sys-critical inits only at reboot,
|
|
* not when booting from ram!
|
|
*/
|
|
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
|
|
bl cpu_init_crit
|
|
#endif
|
|
|
|
bl _main
|
|
|
|
/*------------------------------------------------------------------------------*/
|
|
|
|
.globl c_runtime_cpu_setup
|
|
c_runtime_cpu_setup:
|
|
|
|
mov pc, lr
|
|
|
|
/*
|
|
*************************************************************************
|
|
*
|
|
* CPU_init_critical registers
|
|
*
|
|
* setup important registers
|
|
* setup memory timing
|
|
*
|
|
*************************************************************************
|
|
*/
|
|
|
|
|
|
/* Interrupt-Controller base address */
|
|
IC_BASE: .word 0x90050000
|
|
#define ICMR 0x04
|
|
|
|
|
|
/* Reset-Controller */
|
|
RST_BASE: .word 0x90030000
|
|
#define RSRR 0x00
|
|
#define RCSR 0x04
|
|
|
|
|
|
/* PWR */
|
|
PWR_BASE: .word 0x90020000
|
|
#define PSPR 0x08
|
|
#define PPCR 0x14
|
|
cpuspeed: .word CONFIG_SYS_CPUSPEED
|
|
|
|
|
|
cpu_init_crit:
|
|
/*
|
|
* mask all IRQs
|
|
*/
|
|
ldr r0, IC_BASE
|
|
mov r1, #0x00
|
|
str r1, [r0, #ICMR]
|
|
|
|
/* set clock speed */
|
|
ldr r0, PWR_BASE
|
|
ldr r1, cpuspeed
|
|
str r1, [r0, #PPCR]
|
|
|
|
/*
|
|
* before relocating, we have to setup RAM timing
|
|
* because memory timing is board-dependend, you will
|
|
* find a lowlevel_init.S in your board directory.
|
|
*/
|
|
mov ip, lr
|
|
bl lowlevel_init
|
|
mov lr, ip
|
|
|
|
/*
|
|
* disable MMU stuff and enable I-cache
|
|
*/
|
|
mrc p15,0,r0,c1,c0
|
|
bic r0, r0, #0x00002000 @ clear bit 13 (X)
|
|
bic r0, r0, #0x0000000f @ clear bits 3-0 (WCAM)
|
|
orr r0, r0, #0x00001000 @ set bit 12 (I) Icache
|
|
orr r0, r0, #0x00000002 @ set bit 2 (A) Align
|
|
mcr p15,0,r0,c1,c0
|
|
|
|
/*
|
|
* flush v4 I/D caches
|
|
*/
|
|
mov r0, #0
|
|
mcr p15, 0, r0, c7, c7, 0 /* flush v3/v4 cache */
|
|
mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */
|
|
|
|
mov pc, lr
|
|
|