upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/drivers/mtd/nand/denali_spl.c

231 lines
4.7 KiB

/*
* Copyright (C) 2014 Panasonic Corporation
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/io.h>
#include <asm/unaligned.h>
#include <linux/mtd/nand.h>
#include "denali.h"
#define SPARE_ACCESS 0x41
#define MAIN_ACCESS 0x42
#define PIPELINE_ACCESS 0x2000
#define BANK(x) ((x) << 24)
static void __iomem *denali_flash_mem =
(void __iomem *)CONFIG_SYS_NAND_DATA_BASE;
static void __iomem *denali_flash_reg =
(void __iomem *)CONFIG_SYS_NAND_REGS_BASE;
static const int flash_bank;
static uint8_t page_buffer[NAND_MAX_PAGESIZE];
static int page_size, oob_size, pages_per_block;
static void index_addr(uint32_t address, uint32_t data)
{
writel(address, denali_flash_mem + INDEX_CTRL_REG);
writel(data, denali_flash_mem + INDEX_DATA_REG);
}
static int wait_for_irq(uint32_t irq_mask)
{
unsigned long timeout = 1000000;
uint32_t intr_status;
do {
intr_status = readl(denali_flash_reg + INTR_STATUS(flash_bank));
if (intr_status & INTR_STATUS__ECC_UNCOR_ERR) {
debug("Uncorrected ECC detected\n");
return -EIO;
}
if (intr_status & irq_mask)
break;
udelay(1);
timeout--;
} while (timeout);
if (!timeout) {
debug("Timeout with interrupt status %08x\n", intr_status);
return -EIO;
}
return 0;
}
static void read_data_from_flash_mem(uint8_t *buf, int len)
{
int i;
uint32_t *buf32;
/* transfer the data from the flash */
buf32 = (uint32_t *)buf;
/*
* Let's take care of unaligned access although it rarely happens.
* Avoid put_unaligned() for the normal use cases since it leads to
* a bit performance regression.
*/
if ((unsigned long)buf32 % 4) {
for (i = 0; i < len / 4; i++)
put_unaligned(readl(denali_flash_mem + INDEX_DATA_REG),
buf32++);
} else {
for (i = 0; i < len / 4; i++)
*buf32++ = readl(denali_flash_mem + INDEX_DATA_REG);
}
if (len % 4) {
u32 tmp;
tmp = cpu_to_le32(readl(denali_flash_mem + INDEX_DATA_REG));
buf = (uint8_t *)buf32;
for (i = 0; i < len % 4; i++) {
*buf++ = tmp;
tmp >>= 8;
}
}
}
int denali_send_pipeline_cmd(int page, int ecc_en, int access_type)
{
uint32_t addr, cmd;
static uint32_t page_count = 1;
writel(ecc_en, denali_flash_reg + ECC_ENABLE);
/* clear all bits of intr_status. */
writel(0xffff, denali_flash_reg + INTR_STATUS(flash_bank));
addr = BANK(flash_bank) | page;
/* setup the acccess type */
cmd = MODE_10 | addr;
index_addr(cmd, access_type);
/* setup the pipeline command */
index_addr(cmd, PIPELINE_ACCESS | page_count);
cmd = MODE_01 | addr;
writel(cmd, denali_flash_mem + INDEX_CTRL_REG);
return wait_for_irq(INTR_STATUS__LOAD_COMP);
}
static int nand_read_oob(void *buf, int page)
{
int ret;
ret = denali_send_pipeline_cmd(page, 0, SPARE_ACCESS);
if (ret < 0)
return ret;
read_data_from_flash_mem(buf, oob_size);
return 0;
}
static int nand_read_page(void *buf, int page)
{
int ret;
ret = denali_send_pipeline_cmd(page, 1, MAIN_ACCESS);
if (ret < 0)
return ret;
read_data_from_flash_mem(buf, page_size);
return 0;
}
static int nand_block_isbad(int block)
{
int ret;
ret = nand_read_oob(page_buffer, block * pages_per_block);
if (ret < 0)
return ret;
return page_buffer[CONFIG_SYS_NAND_BAD_BLOCK_POS] != 0xff;
}
/* nand_init() - initialize data to make nand usable by SPL */
void nand_init(void)
{
/* access to main area */
writel(0, denali_flash_reg + TRANSFER_SPARE_REG);
/*
* These registers are expected to be already set by the hardware
* or earlier boot code. So we read these values out.
*/
page_size = readl(denali_flash_reg + DEVICE_MAIN_AREA_SIZE);
oob_size = readl(denali_flash_reg + DEVICE_SPARE_AREA_SIZE);
pages_per_block = readl(denali_flash_reg + PAGES_PER_BLOCK);
}
int nand_spl_load_image(uint32_t offs, unsigned int size, void *dst)
{
int block, page, column, readlen;
int ret;
int force_bad_block_check = 1;
page = offs / page_size;
column = offs % page_size;
block = page / pages_per_block;
page = page % pages_per_block;
while (size) {
if (force_bad_block_check || page == 0) {
ret = nand_block_isbad(block);
if (ret < 0)
return ret;
if (ret) {
block++;
continue;
}
}
force_bad_block_check = 0;
if (unlikely(column || size < page_size)) {
/* Partial page read */
ret = nand_read_page(page_buffer,
block * pages_per_block + page);
if (ret < 0)
return ret;
readlen = min(page_size - column, (int)size);
memcpy(dst, page_buffer, readlen);
column = 0;
} else {
ret = nand_read_page(dst,
block * pages_per_block + page);
if (ret < 0)
return ret;
readlen = page_size;
}
size -= readlen;
dst += readlen;
page++;
if (page == pages_per_block) {
block++;
page = 0;
}
}
return 0;
}
void nand_deselect(void) {}