upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/arch/x86/cpu/sc520/sc520_pci.c

142 lines
3.6 KiB

/*
* (C) Copyright 2008-2011
* Graeme Russ, <graeme.russ@gmail.com>
*
* (C) Copyright 2002
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <pci.h>
#include <asm/io.h>
#include <asm/pci.h>
#include <asm/arch/pci.h>
#include <asm/arch/sc520.h>
static struct {
u8 priority;
u16 level_reg;
u8 level_bit;
} sc520_irq[] = {
{ SC520_IRQ0, 0, 0x01 },
{ SC520_IRQ1, 0, 0x02 },
{ SC520_IRQ2, 1, 0x02 },
{ SC520_IRQ3, 0, 0x08 },
{ SC520_IRQ4, 0, 0x10 },
{ SC520_IRQ5, 0, 0x20 },
{ SC520_IRQ6, 0, 0x40 },
{ SC520_IRQ7, 0, 0x80 },
{ SC520_IRQ8, 1, 0x01 },
{ SC520_IRQ9, 1, 0x02 },
{ SC520_IRQ10, 1, 0x04 },
{ SC520_IRQ11, 1, 0x08 },
{ SC520_IRQ12, 1, 0x10 },
{ SC520_IRQ13, 1, 0x20 },
{ SC520_IRQ14, 1, 0x40 },
{ SC520_IRQ15, 1, 0x80 }
};
/* The interrupt used for PCI INTA-INTD */
int sc520_pci_ints[15] = {
-1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, -1, -1, -1, -1
};
/* utility function to configure a pci interrupt */
int pci_sc520_set_irq(int pci_pin, int irq)
{
int i;
u8 tmpb;
u16 tmpw;
debug("set_irq(): map INT%c to IRQ%d\n", pci_pin + 'A', irq);
if (irq < 0 || irq > 15)
return -1; /* illegal irq */
if (pci_pin < 0 || pci_pin > 15)
return -1; /* illegal pci int pin */
/* first disable any non-pci interrupt source that use
* this level */
/* PCI interrupt mapping (A through D)*/
for (i = 0; i <= 3 ; i++) {
tmpb = readb(&sc520_mmcr->pci_int_map[i]);
if (tmpb == sc520_irq[irq].priority)
writeb(SC520_IRQ_DISABLED, &sc520_mmcr->pci_int_map[i]);
}
/* GP IRQ interrupt mapping */
for (i = 0; i <= 10 ; i++) {
tmpb = readb(&sc520_mmcr->gp_int_map[i]);
if (tmpb == sc520_irq[irq].priority)
writeb(SC520_IRQ_DISABLED, &sc520_mmcr->gp_int_map[i]);
}
/* Set the trigger to level */
tmpb = readb(&sc520_mmcr->pic_mode[sc520_irq[irq].level_reg]);
tmpb |= sc520_irq[irq].level_bit;
writeb(tmpb, &sc520_mmcr->pic_mode[sc520_irq[irq].level_reg]);
if (pci_pin < 4) {
/* PCI INTA-INTD */
/* route the interrupt */
writeb(sc520_irq[irq].priority,
&sc520_mmcr->pci_int_map[pci_pin]);
} else {
/* GPIRQ0-GPIRQ10 used for additional PCI INTS */
writeb(sc520_irq[irq].priority,
&sc520_mmcr->gp_int_map[pci_pin - 4]);
/* also set the polarity in this case */
tmpw = readw(&sc520_mmcr->intpinpol);
tmpw |= (1 << (pci_pin-4));
writew(tmpw, &sc520_mmcr->intpinpol);
}
/* register the pin */
sc520_pci_ints[pci_pin] = irq;
return 0; /* OK */
}
void pci_sc520_init(struct pci_controller *hose)
{
hose->first_busno = 0;
hose->last_busno = 0xff;
hose->region_count = pci_set_regions(hose);
pci_setup_type1(hose);
pci_register_hose(hose);
hose->last_busno = pci_hose_scan(hose);
/* enable target memory acceses on host brige */
pci_write_config_word(0, PCI_COMMAND,
PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
}