upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/board/matrix_vision/mvblx/fpga.c

219 lines
5.2 KiB

/*
* (C) Copyright 2002
* Rich Ireland, Enterasys Networks, rireland@enterasys.com.
* Keith Outwater, keith_outwater@mvis.com.
*
* (C) Copyright 2011
* Andre Schwarz, Matrix Vision GmbH, andre.schwarz@matrix-vision.de
* Michael Jones, Matrix Vision GmbH, michael.jones@matrix-vision.de
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
*/
#include <common.h>
#include <ACEX1K.h>
#include <command.h>
#include <asm/gpio.h>
#include "fpga.h"
#ifdef FPGA_DEBUG
#define fpga_debug(fmt, args...) printf("%s: "fmt, __func__, ##args)
#else
#define fpga_debug(fmt, args...)
#endif
Altera_CYC2_Passive_Serial_fns altera_fns = {
fpga_null_fn, /* Altera_pre_fn */
fpga_config_fn,
fpga_status_fn,
fpga_done_fn,
fpga_wr_fn,
fpga_null_fn,
fpga_null_fn,
};
Altera_desc cyclone2 = {
Altera_CYC2,
fast_passive_parallel,
Altera_EP3C5_SIZE,
(void *) &altera_fns,
NULL,
0
};
#define GPIO_RESET 43
#define GPIO_DCLK 65
#define GPIO_nSTATUS 157
#define GPIO_CONF_DONE 158
#define GPIO_nCONFIG 159
#define GPIO_DATA0 54
#define GPIO_DATA1 55
#define GPIO_DATA2 56
#define GPIO_DATA3 57
#define GPIO_DATA4 58
#define GPIO_DATA5 60
#define GPIO_DATA6 61
#define GPIO_DATA7 62
DECLARE_GLOBAL_DATA_PTR;
/* return FPGA_SUCCESS on success, else FPGA_FAIL
*/
int mvblx_init_fpga(void)
{
fpga_debug("Initializing FPGA interface\n");
fpga_init();
fpga_add(fpga_altera, &cyclone2);
if (gpio_request(GPIO_DCLK, "dclk") ||
gpio_request(GPIO_nSTATUS, "nStatus") ||
#ifndef CONFIG_SYS_FPGA_DONT_USE_CONF_DONE
gpio_request(GPIO_CONF_DONE, "conf_done") ||
#endif
gpio_request(GPIO_nCONFIG, "nConfig") ||
gpio_request(GPIO_DATA0, "data0") ||
gpio_request(GPIO_DATA1, "data1") ||
gpio_request(GPIO_DATA2, "data2") ||
gpio_request(GPIO_DATA3, "data3") ||
gpio_request(GPIO_DATA4, "data4") ||
gpio_request(GPIO_DATA5, "data5") ||
gpio_request(GPIO_DATA6, "data6") ||
gpio_request(GPIO_DATA7, "data7")) {
printf("%s: error requesting GPIOs.", __func__);
return FPGA_FAIL;
}
/* set up outputs */
gpio_direction_output(GPIO_DCLK, 0);
gpio_direction_output(GPIO_nCONFIG, 0);
gpio_direction_output(GPIO_DATA0, 0);
gpio_direction_output(GPIO_DATA1, 0);
gpio_direction_output(GPIO_DATA2, 0);
gpio_direction_output(GPIO_DATA3, 0);
gpio_direction_output(GPIO_DATA4, 0);
gpio_direction_output(GPIO_DATA5, 0);
gpio_direction_output(GPIO_DATA6, 0);
gpio_direction_output(GPIO_DATA7, 0);
/* NB omap_free_gpio() resets to an input, so we can't
* free ie. nCONFIG, or else the FPGA would reset
* Q: presumably gpio_free() has the same effect?
*/
/* set up inputs */
gpio_direction_input(GPIO_nSTATUS);
#ifndef CONFIG_SYS_FPGA_DONT_USE_CONF_DONE
gpio_direction_input(GPIO_CONF_DONE);
#endif
fpga_config_fn(0, 1, 0);
udelay(60);
return FPGA_SUCCESS;
}
int fpga_null_fn(int cookie)
{
return 0;
}
int fpga_config_fn(int assert, int flush, int cookie)
{
fpga_debug("SET config : %s=%d\n", assert ? "low" : "high", assert);
if (flush) {
gpio_set_value(GPIO_nCONFIG, !assert);
udelay(1);
gpio_set_value(GPIO_nCONFIG, assert);
}
return assert;
}
int fpga_done_fn(int cookie)
{
int result = 0;
/* since revA of BLX, we will not get this signal. */
udelay(10);
#ifdef CONFIG_SYS_FPGA_DONT_USE_CONF_DONE
fpga_debug("not waiting for CONF_DONE.");
result = 1;
#else
fpga_debug("CONF_DONE check ... ");
if (gpio_get_value(GPIO_CONF_DONE)) {
fpga_debug("high\n");
result = 1;
} else
fpga_debug("low\n");
gpio_free(GPIO_CONF_DONE);
#endif
return result;
}
int fpga_status_fn(int cookie)
{
int result = 0;
fpga_debug("STATUS check ... ");
result = gpio_get_value(GPIO_nSTATUS);
if (result < 0)
fpga_debug("error\n");
else if (result > 0)
fpga_debug("high\n");
else
fpga_debug("low\n");
return result;
}
static inline int _write_fpga(u8 byte)
{
gpio_set_value(GPIO_DATA0, byte & 0x01);
gpio_set_value(GPIO_DATA1, (byte >> 1) & 0x01);
gpio_set_value(GPIO_DATA2, (byte >> 2) & 0x01);
gpio_set_value(GPIO_DATA3, (byte >> 3) & 0x01);
gpio_set_value(GPIO_DATA4, (byte >> 4) & 0x01);
gpio_set_value(GPIO_DATA5, (byte >> 5) & 0x01);
gpio_set_value(GPIO_DATA6, (byte >> 6) & 0x01);
gpio_set_value(GPIO_DATA7, (byte >> 7) & 0x01);
/* clock */
gpio_set_value(GPIO_DCLK, 1);
udelay(1);
gpio_set_value(GPIO_DCLK, 0);
udelay(1);
return 0;
}
int fpga_wr_fn(const void *buf, size_t len, int flush, int cookie)
{
unsigned char *data = (unsigned char *) buf;
int i;
fpga_debug("fpga_wr: buf %p / size %d\n", buf, len);
for (i = 0; i < len; i++)
_write_fpga(data[i]);
fpga_debug("-%s\n", __func__);
return FPGA_SUCCESS;
}