upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/drivers/mmc/bfin_sdh.c

304 lines
7.8 KiB

/*
* Driver for Blackfin on-chip SDH controller
*
* Copyright (c) 2008-2009 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
#include <common.h>
#include <malloc.h>
#include <part.h>
#include <mmc.h>
#include <asm/io.h>
#include <asm/errno.h>
#include <asm/byteorder.h>
#include <asm/blackfin.h>
#include <asm/clock.h>
#include <asm/portmux.h>
#include <asm/mach-common/bits/sdh.h>
#include <asm/mach-common/bits/dma.h>
#if defined(__ADSPBF50x__) || defined(__ADSPBF51x__) || defined(__ADSPBF60x__)
# define bfin_read_SDH_CLK_CTL bfin_read_RSI_CLK_CONTROL
# define bfin_write_SDH_CLK_CTL bfin_write_RSI_CLK_CONTROL
# define bfin_write_SDH_ARGUMENT bfin_write_RSI_ARGUMENT
# define bfin_write_SDH_COMMAND bfin_write_RSI_COMMAND
# define bfin_read_SDH_RESPONSE0 bfin_read_RSI_RESPONSE0
# define bfin_read_SDH_RESPONSE1 bfin_read_RSI_RESPONSE1
# define bfin_read_SDH_RESPONSE2 bfin_read_RSI_RESPONSE2
# define bfin_read_SDH_RESPONSE3 bfin_read_RSI_RESPONSE3
# define bfin_write_SDH_DATA_TIMER bfin_write_RSI_DATA_TIMER
# define bfin_write_SDH_DATA_LGTH bfin_write_RSI_DATA_LGTH
# define bfin_read_SDH_DATA_CTL bfin_read_RSI_DATA_CONTROL
# define bfin_write_SDH_DATA_CTL bfin_write_RSI_DATA_CONTROL
# define bfin_read_SDH_STATUS bfin_read_RSI_STATUS
# define bfin_write_SDH_STATUS_CLR bfin_write_RSI_STATUSCL
# define bfin_read_SDH_CFG bfin_read_RSI_CONFIG
# define bfin_write_SDH_CFG bfin_write_RSI_CONFIG
# if defined(__ADSPBF60x__)
# define bfin_read_SDH_BLK_SIZE bfin_read_RSI_BLKSZ
# define bfin_write_SDH_BLK_SIZE bfin_write_RSI_BLKSZ
# define bfin_write_DMA_START_ADDR bfin_write_DMA10_START_ADDR
# define bfin_write_DMA_X_COUNT bfin_write_DMA10_X_COUNT
# define bfin_write_DMA_X_MODIFY bfin_write_DMA10_X_MODIFY
# define bfin_write_DMA_CONFIG bfin_write_DMA10_CONFIG
# else
# define bfin_read_SDH_PWR_CTL bfin_read_RSI_PWR_CONTROL
# define bfin_write_SDH_PWR_CTL bfin_write_RSI_PWR_CONTROL
# define bfin_write_DMA_START_ADDR bfin_write_DMA4_START_ADDR
# define bfin_write_DMA_X_COUNT bfin_write_DMA4_X_COUNT
# define bfin_write_DMA_X_MODIFY bfin_write_DMA4_X_MODIFY
# define bfin_write_DMA_CONFIG bfin_write_DMA4_CONFIG
# endif
# define PORTMUX_PINS \
{ P_RSI_DATA0, P_RSI_DATA1, P_RSI_DATA2, P_RSI_DATA3, P_RSI_CMD, P_RSI_CLK, 0 }
#elif defined(__ADSPBF54x__)
# define bfin_write_DMA_START_ADDR bfin_write_DMA22_START_ADDR
# define bfin_write_DMA_X_COUNT bfin_write_DMA22_X_COUNT
# define bfin_write_DMA_X_MODIFY bfin_write_DMA22_X_MODIFY
# define bfin_write_DMA_CONFIG bfin_write_DMA22_CONFIG
# define PORTMUX_PINS \
{ P_SD_D0, P_SD_D1, P_SD_D2, P_SD_D3, P_SD_CLK, P_SD_CMD, 0 }
#else
# error no support for this proc yet
#endif
static int
sdh_send_cmd(struct mmc *mmc, struct mmc_cmd *mmc_cmd)
{
unsigned int status, timeout;
int cmd = mmc_cmd->cmdidx;
int flags = mmc_cmd->resp_type;
int arg = mmc_cmd->cmdarg;
int ret;
u16 sdh_cmd;
sdh_cmd = cmd | CMD_E;
if (flags & MMC_RSP_PRESENT)
sdh_cmd |= CMD_RSP;
if (flags & MMC_RSP_136)
sdh_cmd |= CMD_L_RSP;
#ifdef RSI_BLKSZ
sdh_cmd |= CMD_DATA0_BUSY;
#endif
bfin_write_SDH_ARGUMENT(arg);
bfin_write_SDH_COMMAND(sdh_cmd);
/* wait for a while */
timeout = 0;
do {
if (++timeout > 1000000) {
status = CMD_TIME_OUT;
break;
}
udelay(1);
status = bfin_read_SDH_STATUS();
} while (!(status & (CMD_SENT | CMD_RESP_END | CMD_TIME_OUT |
CMD_CRC_FAIL)));
if (flags & MMC_RSP_PRESENT) {
mmc_cmd->response[0] = bfin_read_SDH_RESPONSE0();
if (flags & MMC_RSP_136) {
mmc_cmd->response[1] = bfin_read_SDH_RESPONSE1();
mmc_cmd->response[2] = bfin_read_SDH_RESPONSE2();
mmc_cmd->response[3] = bfin_read_SDH_RESPONSE3();
}
}
if (status & CMD_TIME_OUT)
ret = TIMEOUT;
else if (status & CMD_CRC_FAIL && flags & MMC_RSP_CRC)
ret = COMM_ERR;
else
ret = 0;
bfin_write_SDH_STATUS_CLR(CMD_SENT_STAT | CMD_RESP_END_STAT |
CMD_TIMEOUT_STAT | CMD_CRC_FAIL_STAT);
#ifdef RSI_BLKSZ
/* wait till card ready */
while (!(bfin_read_RSI_ESTAT() & SD_CARD_READY))
continue;
bfin_write_RSI_ESTAT(SD_CARD_READY);
#endif
return ret;
}
/* set data for single block transfer */
static int sdh_setup_data(struct mmc *mmc, struct mmc_data *data)
{
u16 data_ctl = 0;
u16 dma_cfg = 0;
unsigned long data_size = data->blocksize * data->blocks;
/* Don't support write yet. */
if (data->flags & MMC_DATA_WRITE)
return UNUSABLE_ERR;
#ifndef RSI_BLKSZ
data_ctl |= ((ffs(data->blocksize) - 1) << 4);
#else
bfin_write_SDH_BLK_SIZE(data->blocksize);
#endif
data_ctl |= DTX_DIR;
bfin_write_SDH_DATA_CTL(data_ctl);
dma_cfg = WDSIZE_32 | PSIZE_32 | RESTART | WNR | DMAEN;
bfin_write_SDH_DATA_TIMER(-1);
blackfin_dcache_flush_invalidate_range(data->dest,
data->dest + data_size);
/* configure DMA */
bfin_write_DMA_START_ADDR(data->dest);
bfin_write_DMA_X_COUNT(data_size / 4);
bfin_write_DMA_X_MODIFY(4);
bfin_write_DMA_CONFIG(dma_cfg);
bfin_write_SDH_DATA_LGTH(data_size);
/* kick off transfer */
bfin_write_SDH_DATA_CTL(bfin_read_SDH_DATA_CTL() | DTX_DMA_E | DTX_E);
return 0;
}
static int bfin_sdh_request(struct mmc *mmc, struct mmc_cmd *cmd,
struct mmc_data *data)
{
u32 status;
int ret = 0;
if (data) {
ret = sdh_setup_data(mmc, data);
if (ret)
return ret;
}
ret = sdh_send_cmd(mmc, cmd);
if (ret) {
bfin_write_SDH_COMMAND(0);
bfin_write_DMA_CONFIG(0);
bfin_write_SDH_DATA_CTL(0);
SSYNC();
printf("sending CMD%d failed\n", cmd->cmdidx);
return ret;
}
if (data) {
do {
udelay(1);
status = bfin_read_SDH_STATUS();
} while (!(status & (DAT_END | DAT_TIME_OUT | DAT_CRC_FAIL |
RX_OVERRUN)));
if (status & DAT_TIME_OUT) {
bfin_write_SDH_STATUS_CLR(DAT_TIMEOUT_STAT);
ret |= TIMEOUT;
} else if (status & (DAT_CRC_FAIL | RX_OVERRUN)) {
bfin_write_SDH_STATUS_CLR(DAT_CRC_FAIL_STAT | RX_OVERRUN_STAT);
ret |= COMM_ERR;
} else
bfin_write_SDH_STATUS_CLR(DAT_BLK_END_STAT | DAT_END_STAT);
if (ret) {
printf("tranfering data failed\n");
return ret;
}
}
return 0;
}
static void sdh_set_clk(unsigned long clk)
{
unsigned long sys_clk;
unsigned long clk_div;
u16 clk_ctl = 0;
clk_ctl = bfin_read_SDH_CLK_CTL();
if (clk) {
/* setting SD_CLK */
sys_clk = get_sclk();
bfin_write_SDH_CLK_CTL(clk_ctl & ~CLK_E);
if (sys_clk % (2 * clk) == 0)
clk_div = sys_clk / (2 * clk) - 1;
else
clk_div = sys_clk / (2 * clk);
if (clk_div > 0xff)
clk_div = 0xff;
clk_ctl |= (clk_div & 0xff);
clk_ctl |= CLK_E;
bfin_write_SDH_CLK_CTL(clk_ctl);
} else
bfin_write_SDH_CLK_CTL(clk_ctl & ~CLK_E);
}
static void bfin_sdh_set_ios(struct mmc *mmc)
{
u16 cfg = 0;
u16 clk_ctl = 0;
if (mmc->bus_width == 4) {
cfg = bfin_read_SDH_CFG();
#ifndef RSI_BLKSZ
cfg &= ~PD_SDDAT3;
#endif
cfg |= PUP_SDDAT3;
bfin_write_SDH_CFG(cfg);
clk_ctl |= WIDE_BUS_4;
}
bfin_write_SDH_CLK_CTL(clk_ctl);
sdh_set_clk(mmc->clock);
}
static int bfin_sdh_init(struct mmc *mmc)
{
const unsigned short pins[] = PORTMUX_PINS;
int ret;
/* Initialize sdh controller */
ret = peripheral_request_list(pins, "bfin_sdh");
if (ret < 0)
return ret;
#if defined(__ADSPBF54x__)
bfin_write_DMAC1_PERIMUX(bfin_read_DMAC1_PERIMUX() | 0x1);
#endif
bfin_write_SDH_CFG(bfin_read_SDH_CFG() | CLKS_EN);
/* Disable card detect pin */
bfin_write_SDH_CFG((bfin_read_SDH_CFG() & 0x1F) | 0x60);
#ifndef RSI_BLKSZ
bfin_write_SDH_PWR_CTL(PWR_ON | ROD_CTL);
#else
bfin_write_SDH_CFG(bfin_read_SDH_CFG() | PWR_ON);
#endif
return 0;
}
static const struct mmc_ops bfin_mmc_ops = {
.send_cmd = bfin_sdh_request,
.set_ios = bfin_sdh_set_ios,
.init = bfin_sdh_init,
};
static struct mmc_config bfin_mmc_cfg = {
.name = "Blackfin SDH",
.ops = &bfin_mmc_ops,
.host_caps = MMC_MODE_4BIT,
.voltages = MMC_VDD_32_33 | MMC_VDD_33_34,
.b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT,
};
int bfin_mmc_init(bd_t *bis)
{
struct mmc *mmc;
bfin_mmc_cfg.f_max = get_sclk();
bfin_mmc_cfg.f_min = bfin_mmc_cfg.f_max >> 9;
mmc = mmc_create(&bfin_mmc_cfg, NULL);
if (mmc == NULL)
return -1;
return 0;
}