upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
339 lines
8.5 KiB
339 lines
8.5 KiB
/*
|
|
* video.c - run splash screen on lcd
|
|
*
|
|
* Copyright (c) 2007-2008 Analog Devices Inc.
|
|
*
|
|
* Licensed under the GPL-2 or later.
|
|
*/
|
|
|
|
#include <stdarg.h>
|
|
#include <common.h>
|
|
#include <config.h>
|
|
#include <malloc.h>
|
|
#include <asm/blackfin.h>
|
|
#include <asm/clock.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/portmux.h>
|
|
#include <asm/mach-common/bits/dma.h>
|
|
#include <i2c.h>
|
|
#include <linux/types.h>
|
|
#include <stdio_dev.h>
|
|
|
|
#include <lzma/LzmaTypes.h>
|
|
#include <lzma/LzmaDec.h>
|
|
#include <lzma/LzmaTools.h>
|
|
|
|
#define DMA_SIZE16 2
|
|
|
|
#include <asm/mach-common/bits/eppi.h>
|
|
|
|
#include EASYLOGO_HEADER
|
|
|
|
#define LCD_X_RES 480 /*Horizontal Resolution */
|
|
#define LCD_Y_RES 272 /* Vertical Resolution */
|
|
|
|
#define LCD_BPP 24 /* Bit Per Pixel */
|
|
#define LCD_PIXEL_SIZE (LCD_BPP / 8)
|
|
#define DMA_BUS_SIZE 32
|
|
#define ACTIVE_VIDEO_MEM_OFFSET 0
|
|
|
|
/* -- Horizontal synchronizing --
|
|
*
|
|
* Timing characteristics taken from the SHARP LQ043T1DG01 datasheet
|
|
* (LCY-W-06602A Page 9 of 22)
|
|
*
|
|
* Clock Frequency 1/Tc Min 7.83 Typ 9.00 Max 9.26 MHz
|
|
*
|
|
* Period TH - 525 - Clock
|
|
* Pulse width THp - 41 - Clock
|
|
* Horizontal period THd - 480 - Clock
|
|
* Back porch THb - 2 - Clock
|
|
* Front porch THf - 2 - Clock
|
|
*
|
|
* -- Vertical synchronizing --
|
|
* Period TV - 286 - Line
|
|
* Pulse width TVp - 10 - Line
|
|
* Vertical period TVd - 272 - Line
|
|
* Back porch TVb - 2 - Line
|
|
* Front porch TVf - 2 - Line
|
|
*/
|
|
|
|
#define LCD_CLK (8*1000*1000) /* 8MHz */
|
|
|
|
/* # active data to transfer after Horizontal Delay clock */
|
|
#define EPPI_HCOUNT LCD_X_RES
|
|
|
|
/* # active lines to transfer after Vertical Delay clock */
|
|
#define EPPI_VCOUNT LCD_Y_RES
|
|
|
|
/* Samples per Line = 480 (active data) + 45 (padding) */
|
|
#define EPPI_LINE 525
|
|
|
|
/* Lines per Frame = 272 (active data) + 14 (padding) */
|
|
#define EPPI_FRAME 286
|
|
|
|
/* FS1 (Hsync) Width (Typical)*/
|
|
#define EPPI_FS1W_HBL 41
|
|
|
|
/* FS1 (Hsync) Period (Typical) */
|
|
#define EPPI_FS1P_AVPL EPPI_LINE
|
|
|
|
/* Horizontal Delay clock after assertion of Hsync (Typical) */
|
|
#define EPPI_HDELAY 43
|
|
|
|
/* FS2 (Vsync) Width = FS1 (Hsync) Period * 10 */
|
|
#define EPPI_FS2W_LVB (EPPI_LINE * 10)
|
|
|
|
/* FS2 (Vsync) Period = FS1 (Hsync) Period * Lines per Frame */
|
|
#define EPPI_FS2P_LAVF (EPPI_LINE * EPPI_FRAME)
|
|
|
|
/* Vertical Delay after assertion of Vsync (2 Lines) */
|
|
#define EPPI_VDELAY 12
|
|
|
|
#define EPPI_CLIP 0xFF00FF00
|
|
|
|
/* EPPI Control register configuration value for RGB out
|
|
* - EPPI as Output
|
|
* GP 2 frame sync mode,
|
|
* Internal Clock generation disabled, Internal FS generation enabled,
|
|
* Receives samples on EPPI_CLK raising edge, Transmits samples on EPPI_CLK falling edge,
|
|
* FS1 & FS2 are active high,
|
|
* DLEN = 6 (24 bits for RGB888 out) or 5 (18 bits for RGB666 out)
|
|
* DMA Unpacking disabled when RGB Formating is enabled, otherwise DMA unpacking enabled
|
|
* Swapping Enabled,
|
|
* One (DMA) Channel Mode,
|
|
* RGB Formatting Enabled for RGB666 output, disabled for RGB888 output
|
|
* Regular watermark - when FIFO is 100% full,
|
|
* Urgent watermark - when FIFO is 75% full
|
|
*/
|
|
|
|
#define EPPI_CONTROL (0x20136E2E)
|
|
|
|
static inline u16 get_eppi_clkdiv(u32 target_ppi_clk)
|
|
{
|
|
u32 sclk = get_sclk();
|
|
|
|
/* EPPI_CLK = (SCLK) / (2 * (EPPI_CLKDIV[15:0] + 1)) */
|
|
|
|
return (((sclk / target_ppi_clk) / 2) - 1);
|
|
}
|
|
|
|
void Init_PPI(void)
|
|
{
|
|
u16 eppi_clkdiv = get_eppi_clkdiv(LCD_CLK);
|
|
|
|
bfin_write_EPPI0_FS1W_HBL(EPPI_FS1W_HBL);
|
|
bfin_write_EPPI0_FS1P_AVPL(EPPI_FS1P_AVPL);
|
|
bfin_write_EPPI0_FS2W_LVB(EPPI_FS2W_LVB);
|
|
bfin_write_EPPI0_FS2P_LAVF(EPPI_FS2P_LAVF);
|
|
bfin_write_EPPI0_CLIP(EPPI_CLIP);
|
|
|
|
bfin_write_EPPI0_FRAME(EPPI_FRAME);
|
|
bfin_write_EPPI0_LINE(EPPI_LINE);
|
|
|
|
bfin_write_EPPI0_HCOUNT(EPPI_HCOUNT);
|
|
bfin_write_EPPI0_HDELAY(EPPI_HDELAY);
|
|
bfin_write_EPPI0_VCOUNT(EPPI_VCOUNT);
|
|
bfin_write_EPPI0_VDELAY(EPPI_VDELAY);
|
|
|
|
bfin_write_EPPI0_CLKDIV(eppi_clkdiv);
|
|
|
|
/*
|
|
* DLEN = 6 (24 bits for RGB888 out) or 5 (18 bits for RGB666 out)
|
|
* RGB Formatting Enabled for RGB666 output, disabled for RGB888 output
|
|
*/
|
|
#if defined(CONFIG_VIDEO_RGB666)
|
|
bfin_write_EPPI0_CONTROL((EPPI_CONTROL & ~DLENGTH) | DLEN_18 |
|
|
RGB_FMT_EN);
|
|
#else
|
|
bfin_write_EPPI0_CONTROL(((EPPI_CONTROL & ~DLENGTH) | DLEN_24) &
|
|
~RGB_FMT_EN);
|
|
#endif
|
|
|
|
}
|
|
|
|
#define DEB2_URGENT 0x2000 /* DEB2 Urgent */
|
|
|
|
void Init_DMA(void *dst)
|
|
{
|
|
#if defined(CONFIG_DEB_DMA_URGENT)
|
|
bfin_write_EBIU_DDRQUE(bfin_read_EBIU_DDRQUE() | DEB2_URGENT);
|
|
#endif
|
|
|
|
bfin_write_DMA12_START_ADDR(dst);
|
|
|
|
/* X count */
|
|
bfin_write_DMA12_X_COUNT((LCD_X_RES * LCD_BPP) / DMA_BUS_SIZE);
|
|
bfin_write_DMA12_X_MODIFY(DMA_BUS_SIZE / 8);
|
|
|
|
/* Y count */
|
|
bfin_write_DMA12_Y_COUNT(LCD_Y_RES);
|
|
bfin_write_DMA12_Y_MODIFY(DMA_BUS_SIZE / 8);
|
|
|
|
/* DMA Config */
|
|
bfin_write_DMA12_CONFIG(
|
|
WDSIZE_32 | /* 32 bit DMA */
|
|
DMA2D | /* 2D DMA */
|
|
FLOW_AUTO /* autobuffer mode */
|
|
);
|
|
}
|
|
|
|
void Init_Ports(void)
|
|
{
|
|
const unsigned short pins[] = {
|
|
P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3, P_PPI0_D4,
|
|
P_PPI0_D5, P_PPI0_D6, P_PPI0_D7, P_PPI0_D8, P_PPI0_D9,
|
|
P_PPI0_D10, P_PPI0_D11, P_PPI0_D12, P_PPI0_D13, P_PPI0_D14,
|
|
P_PPI0_D15, P_PPI0_D16, P_PPI0_D17,
|
|
#if !defined(CONFIG_VIDEO_RGB666)
|
|
P_PPI0_D18, P_PPI0_D19, P_PPI0_D20, P_PPI0_D21, P_PPI0_D22,
|
|
P_PPI0_D23,
|
|
#endif
|
|
P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2, 0,
|
|
};
|
|
peripheral_request_list(pins, "lcd");
|
|
|
|
gpio_request(GPIO_PE3, "lcd-disp");
|
|
gpio_direction_output(GPIO_PE3, 1);
|
|
}
|
|
|
|
void EnableDMA(void)
|
|
{
|
|
bfin_write_DMA12_CONFIG(bfin_read_DMA12_CONFIG() | DMAEN);
|
|
}
|
|
|
|
void DisableDMA(void)
|
|
{
|
|
bfin_write_DMA12_CONFIG(bfin_read_DMA12_CONFIG() & ~DMAEN);
|
|
}
|
|
|
|
/* enable and disable PPI functions */
|
|
void EnablePPI(void)
|
|
{
|
|
bfin_write_EPPI0_CONTROL(bfin_read_EPPI0_CONTROL() | EPPI_EN);
|
|
}
|
|
|
|
void DisablePPI(void)
|
|
{
|
|
bfin_write_EPPI0_CONTROL(bfin_read_EPPI0_CONTROL() & ~EPPI_EN);
|
|
}
|
|
|
|
int video_init(void *dst)
|
|
{
|
|
Init_Ports();
|
|
Init_DMA(dst);
|
|
EnableDMA();
|
|
Init_PPI();
|
|
EnablePPI();
|
|
|
|
return 0;
|
|
}
|
|
|
|
void video_stop(void)
|
|
{
|
|
DisablePPI();
|
|
DisableDMA();
|
|
}
|
|
|
|
static void dma_bitblit(void *dst, fastimage_t *logo, int x, int y)
|
|
{
|
|
if (dcache_status())
|
|
blackfin_dcache_flush_range(logo->data,
|
|
logo->data + logo->size);
|
|
|
|
bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR);
|
|
|
|
/* Setup destination start address */
|
|
bfin_write_MDMA_D0_START_ADDR(dst + ((x & -2) * LCD_PIXEL_SIZE)
|
|
+ (y * LCD_X_RES * LCD_PIXEL_SIZE));
|
|
/* Setup destination xcount */
|
|
bfin_write_MDMA_D0_X_COUNT(logo->width * LCD_PIXEL_SIZE / DMA_SIZE16);
|
|
/* Setup destination xmodify */
|
|
bfin_write_MDMA_D0_X_MODIFY(DMA_SIZE16);
|
|
|
|
/* Setup destination ycount */
|
|
bfin_write_MDMA_D0_Y_COUNT(logo->height);
|
|
/* Setup destination ymodify */
|
|
bfin_write_MDMA_D0_Y_MODIFY((LCD_X_RES - logo->width) * LCD_PIXEL_SIZE +
|
|
DMA_SIZE16);
|
|
|
|
/* Setup Source start address */
|
|
bfin_write_MDMA_S0_START_ADDR(logo->data);
|
|
/* Setup Source xcount */
|
|
bfin_write_MDMA_S0_X_COUNT(logo->width * LCD_PIXEL_SIZE / DMA_SIZE16);
|
|
/* Setup Source xmodify */
|
|
bfin_write_MDMA_S0_X_MODIFY(DMA_SIZE16);
|
|
|
|
/* Setup Source ycount */
|
|
bfin_write_MDMA_S0_Y_COUNT(logo->height);
|
|
/* Setup Source ymodify */
|
|
bfin_write_MDMA_S0_Y_MODIFY(DMA_SIZE16);
|
|
|
|
/* Enable source DMA */
|
|
bfin_write_MDMA_S0_CONFIG(DMAEN | WDSIZE_16 | DMA2D);
|
|
SSYNC();
|
|
bfin_write_MDMA_D0_CONFIG(WNR | DMAEN | WDSIZE_16 | DMA2D);
|
|
|
|
while (bfin_read_MDMA_D0_IRQ_STATUS() & DMA_RUN) ;
|
|
|
|
bfin_write_MDMA_S0_IRQ_STATUS(bfin_read_MDMA_S0_IRQ_STATUS() | DMA_DONE
|
|
| DMA_ERR);
|
|
bfin_write_MDMA_D0_IRQ_STATUS(bfin_read_MDMA_D0_IRQ_STATUS() | DMA_DONE
|
|
| DMA_ERR);
|
|
|
|
}
|
|
|
|
int drv_video_init(void)
|
|
{
|
|
int error, devices = 1;
|
|
struct stdio_dev videodev;
|
|
|
|
u8 *dst;
|
|
u32 fbmem_size =
|
|
LCD_X_RES * LCD_Y_RES * LCD_PIXEL_SIZE + ACTIVE_VIDEO_MEM_OFFSET;
|
|
|
|
dst = malloc(fbmem_size);
|
|
|
|
if (dst == NULL) {
|
|
printf("Failed to alloc FB memory\n");
|
|
return -1;
|
|
}
|
|
|
|
#ifdef EASYLOGO_ENABLE_GZIP
|
|
unsigned char *data = EASYLOGO_DECOMP_BUFFER;
|
|
unsigned long src_len = EASYLOGO_ENABLE_GZIP;
|
|
error = gunzip(data, bfin_logo.size, bfin_logo.data, &src_len);
|
|
bfin_logo.data = data;
|
|
#elif defined(EASYLOGO_ENABLE_LZMA)
|
|
unsigned char *data = EASYLOGO_DECOMP_BUFFER;
|
|
SizeT lzma_len = bfin_logo.size;
|
|
error = lzmaBuffToBuffDecompress(data, &lzma_len,
|
|
bfin_logo.data, EASYLOGO_ENABLE_LZMA);
|
|
bfin_logo.data = data;
|
|
#else
|
|
error = 0;
|
|
#endif
|
|
|
|
if (error) {
|
|
puts("Failed to decompress logo\n");
|
|
free(dst);
|
|
return -1;
|
|
}
|
|
|
|
memset(dst + ACTIVE_VIDEO_MEM_OFFSET, bfin_logo.data[0],
|
|
fbmem_size - ACTIVE_VIDEO_MEM_OFFSET);
|
|
|
|
dma_bitblit(dst + ACTIVE_VIDEO_MEM_OFFSET, &bfin_logo,
|
|
(LCD_X_RES - bfin_logo.width) / 2,
|
|
(LCD_Y_RES - bfin_logo.height) / 2);
|
|
|
|
video_init(dst); /* Video initialization */
|
|
|
|
memset(&videodev, 0, sizeof(videodev));
|
|
|
|
strcpy(videodev.name, "video");
|
|
|
|
error = stdio_register(&videodev);
|
|
|
|
return (error == 0) ? devices : error;
|
|
}
|
|
|