upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
94 lines
2.5 KiB
94 lines
2.5 KiB
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/cpu.h>
|
|
#include <asm/arch/clock.h>
|
|
|
|
#ifdef CONFIG_SPL_BUILD
|
|
void clock_init_safe(void)
|
|
{
|
|
struct sunxi_ccm_reg *const ccm =
|
|
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
|
|
clock_set_pll1(408000000);
|
|
|
|
writel(CCM_PLL6_DEFAULT, &ccm->pll6_cfg);
|
|
while (!(readl(&ccm->pll6_cfg) & CCM_PLL6_LOCK))
|
|
;
|
|
|
|
clrsetbits_le32(&ccm->cpu_axi_cfg, CCM_CPU_AXI_APB_MASK | CCM_CPU_AXI_AXI_MASK,
|
|
CCM_CPU_AXI_DEFAULT_FACTORS);
|
|
|
|
writel(CCM_PSI_AHB1_AHB2_DEFAULT, &ccm->psi_ahb1_ahb2_cfg);
|
|
writel(CCM_AHB3_DEFAULT, &ccm->ahb3_cfg);
|
|
writel(CCM_APB1_DEFAULT, &ccm->apb1_cfg);
|
|
|
|
/*
|
|
* The mux and factor are set, but the clock will be enabled in
|
|
* DRAM initialization code.
|
|
*/
|
|
writel(MBUS_CLK_SRC_PLL6X2 | MBUS_CLK_M(3), &ccm->mbus_cfg);
|
|
}
|
|
#endif
|
|
|
|
void clock_init_uart(void)
|
|
{
|
|
struct sunxi_ccm_reg *const ccm =
|
|
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
|
|
|
|
/* uart clock source is apb2 */
|
|
writel(APB2_CLK_SRC_OSC24M|
|
|
APB2_CLK_RATE_N_1|
|
|
APB2_CLK_RATE_M(1),
|
|
&ccm->apb2_cfg);
|
|
|
|
/* open the clock for uart */
|
|
setbits_le32(&ccm->uart_gate_reset,
|
|
1 << (CONFIG_CONS_INDEX - 1));
|
|
|
|
/* deassert uart reset */
|
|
setbits_le32(&ccm->uart_gate_reset,
|
|
1 << (RESET_SHIFT + CONFIG_CONS_INDEX - 1));
|
|
}
|
|
|
|
#ifdef CONFIG_SPL_BUILD
|
|
void clock_set_pll1(unsigned int clk)
|
|
{
|
|
struct sunxi_ccm_reg * const ccm =
|
|
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
|
|
u32 val;
|
|
|
|
/* Do not support clocks < 288MHz as they need factor P */
|
|
if (clk < 288000000) clk = 288000000;
|
|
|
|
/* Switch to 24MHz clock while changing PLL1 */
|
|
val = readl(&ccm->cpu_axi_cfg);
|
|
val &= ~CCM_CPU_AXI_MUX_MASK;
|
|
val |= CCM_CPU_AXI_MUX_OSC24M;
|
|
writel(val, &ccm->cpu_axi_cfg);
|
|
|
|
/* clk = 24*n/p, p is ignored if clock is >288MHz */
|
|
writel(CCM_PLL1_CTRL_EN | CCM_PLL1_LOCK_EN | CCM_PLL1_CLOCK_TIME_2 |
|
|
CCM_PLL1_CTRL_N(clk / 24000000), &ccm->pll1_cfg);
|
|
while (!(readl(&ccm->pll1_cfg) & CCM_PLL1_LOCK)) {}
|
|
|
|
/* Switch CPU to PLL1 */
|
|
val = readl(&ccm->cpu_axi_cfg);
|
|
val &= ~CCM_CPU_AXI_MUX_MASK;
|
|
val |= CCM_CPU_AXI_MUX_PLL_CPUX;
|
|
writel(val, &ccm->cpu_axi_cfg);
|
|
}
|
|
#endif
|
|
|
|
unsigned int clock_get_pll6(void)
|
|
{
|
|
struct sunxi_ccm_reg *const ccm =
|
|
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
|
|
|
|
uint32_t rval = readl(&ccm->pll6_cfg);
|
|
int n = ((rval & CCM_PLL6_CTRL_N_MASK) >> CCM_PLL6_CTRL_N_SHIFT);
|
|
int div1 = ((rval & CCM_PLL6_CTRL_DIV1_MASK) >>
|
|
CCM_PLL6_CTRL_DIV1_SHIFT) + 1;
|
|
int div2 = ((rval & CCM_PLL6_CTRL_DIV2_MASK) >>
|
|
CCM_PLL6_CTRL_DIV2_SHIFT) + 1;
|
|
/* The register defines PLL6-4X, not plain PLL6 */
|
|
return 24000000 / 4 * n / div1 / div2;
|
|
}
|
|
|