upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
706 lines
20 KiB
706 lines
20 KiB
/*
|
|
* Copyright (C) 2006 Freescale Semiconductor, Inc.
|
|
*
|
|
* Dave Liu <daveliu@freescale.com>
|
|
* based on board/mpc8349emds/mpc8349emds.c
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <ioports.h>
|
|
#include <mpc83xx.h>
|
|
#include <i2c.h>
|
|
#include <spd.h>
|
|
#include <miiphy.h>
|
|
#include <command.h>
|
|
#if defined(CONFIG_PCI)
|
|
#include <pci.h>
|
|
#endif
|
|
#if defined(CONFIG_SPD_EEPROM)
|
|
#include <spd_sdram.h>
|
|
#else
|
|
#include <asm/mmu.h>
|
|
#endif
|
|
#if defined(CONFIG_OF_FLAT_TREE)
|
|
#include <ft_build.h>
|
|
#endif
|
|
#if defined(CONFIG_OF_LIBFDT)
|
|
#include <libfdt.h>
|
|
#include <libfdt_env.h>
|
|
#endif
|
|
|
|
const qe_iop_conf_t qe_iop_conf_tab[] = {
|
|
/* GETH1 */
|
|
{0, 3, 1, 0, 1}, /* TxD0 */
|
|
{0, 4, 1, 0, 1}, /* TxD1 */
|
|
{0, 5, 1, 0, 1}, /* TxD2 */
|
|
{0, 6, 1, 0, 1}, /* TxD3 */
|
|
{1, 6, 1, 0, 3}, /* TxD4 */
|
|
{1, 7, 1, 0, 1}, /* TxD5 */
|
|
{1, 9, 1, 0, 2}, /* TxD6 */
|
|
{1, 10, 1, 0, 2}, /* TxD7 */
|
|
{0, 9, 2, 0, 1}, /* RxD0 */
|
|
{0, 10, 2, 0, 1}, /* RxD1 */
|
|
{0, 11, 2, 0, 1}, /* RxD2 */
|
|
{0, 12, 2, 0, 1}, /* RxD3 */
|
|
{0, 13, 2, 0, 1}, /* RxD4 */
|
|
{1, 1, 2, 0, 2}, /* RxD5 */
|
|
{1, 0, 2, 0, 2}, /* RxD6 */
|
|
{1, 4, 2, 0, 2}, /* RxD7 */
|
|
{0, 7, 1, 0, 1}, /* TX_EN */
|
|
{0, 8, 1, 0, 1}, /* TX_ER */
|
|
{0, 15, 2, 0, 1}, /* RX_DV */
|
|
{0, 16, 2, 0, 1}, /* RX_ER */
|
|
{0, 0, 2, 0, 1}, /* RX_CLK */
|
|
{2, 9, 1, 0, 3}, /* GTX_CLK - CLK10 */
|
|
{2, 8, 2, 0, 1}, /* GTX125 - CLK9 */
|
|
/* GETH2 */
|
|
{0, 17, 1, 0, 1}, /* TxD0 */
|
|
{0, 18, 1, 0, 1}, /* TxD1 */
|
|
{0, 19, 1, 0, 1}, /* TxD2 */
|
|
{0, 20, 1, 0, 1}, /* TxD3 */
|
|
{1, 2, 1, 0, 1}, /* TxD4 */
|
|
{1, 3, 1, 0, 2}, /* TxD5 */
|
|
{1, 5, 1, 0, 3}, /* TxD6 */
|
|
{1, 8, 1, 0, 3}, /* TxD7 */
|
|
{0, 23, 2, 0, 1}, /* RxD0 */
|
|
{0, 24, 2, 0, 1}, /* RxD1 */
|
|
{0, 25, 2, 0, 1}, /* RxD2 */
|
|
{0, 26, 2, 0, 1}, /* RxD3 */
|
|
{0, 27, 2, 0, 1}, /* RxD4 */
|
|
{1, 12, 2, 0, 2}, /* RxD5 */
|
|
{1, 13, 2, 0, 3}, /* RxD6 */
|
|
{1, 11, 2, 0, 2}, /* RxD7 */
|
|
{0, 21, 1, 0, 1}, /* TX_EN */
|
|
{0, 22, 1, 0, 1}, /* TX_ER */
|
|
{0, 29, 2, 0, 1}, /* RX_DV */
|
|
{0, 30, 2, 0, 1}, /* RX_ER */
|
|
{0, 31, 2, 0, 1}, /* RX_CLK */
|
|
{2, 2, 1, 0, 2}, /* GTX_CLK = CLK10 */
|
|
{2, 3, 2, 0, 1}, /* GTX125 - CLK4 */
|
|
|
|
{0, 1, 3, 0, 2}, /* MDIO */
|
|
{0, 2, 1, 0, 1}, /* MDC */
|
|
|
|
{0, 0, 0, 0, QE_IOP_TAB_END}, /* END of table */
|
|
};
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
|
|
u8 *bcsr = (u8 *)CFG_BCSR;
|
|
const immap_t *immr = (immap_t *)CFG_IMMR;
|
|
|
|
/* Enable flash write */
|
|
bcsr[0xa] &= ~0x04;
|
|
|
|
/* Disable G1TXCLK, G2TXCLK h/w buffers (rev.2 h/w bug workaround) */
|
|
if (immr->sysconf.spridr == SPR_8360_REV20 ||
|
|
immr->sysconf.spridr == SPR_8360E_REV20)
|
|
bcsr[0xe] = 0x30;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC)
|
|
extern void ddr_enable_ecc(unsigned int dram_size);
|
|
#endif
|
|
int fixed_sdram(void);
|
|
void sdram_init(void);
|
|
|
|
long int initdram(int board_type)
|
|
{
|
|
volatile immap_t *im = (immap_t *) CFG_IMMR;
|
|
u32 msize = 0;
|
|
|
|
if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im)
|
|
return -1;
|
|
|
|
/* DDR SDRAM - Main SODIMM */
|
|
im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR;
|
|
#if defined(CONFIG_SPD_EEPROM)
|
|
msize = spd_sdram();
|
|
#else
|
|
msize = fixed_sdram();
|
|
#endif
|
|
|
|
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC)
|
|
/*
|
|
* Initialize DDR ECC byte
|
|
*/
|
|
ddr_enable_ecc(msize * 1024 * 1024);
|
|
#endif
|
|
/*
|
|
* Initialize SDRAM if it is on local bus.
|
|
*/
|
|
sdram_init();
|
|
puts(" DDR RAM: ");
|
|
/* return total bus SDRAM size(bytes) -- DDR */
|
|
return (msize * 1024 * 1024);
|
|
}
|
|
|
|
#if !defined(CONFIG_SPD_EEPROM)
|
|
/*************************************************************************
|
|
* fixed sdram init -- doesn't use serial presence detect.
|
|
************************************************************************/
|
|
int fixed_sdram(void)
|
|
{
|
|
volatile immap_t *im = (immap_t *) CFG_IMMR;
|
|
u32 msize = 0;
|
|
u32 ddr_size;
|
|
u32 ddr_size_log2;
|
|
|
|
msize = CFG_DDR_SIZE;
|
|
for (ddr_size = msize << 20, ddr_size_log2 = 0;
|
|
(ddr_size > 1); ddr_size = ddr_size >> 1, ddr_size_log2++) {
|
|
if (ddr_size & 1) {
|
|
return -1;
|
|
}
|
|
}
|
|
im->sysconf.ddrlaw[0].ar =
|
|
LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
|
|
#if (CFG_DDR_SIZE != 256)
|
|
#warning Currenly any ddr size other than 256 is not supported
|
|
#endif
|
|
#ifdef CONFIG_DDR_II
|
|
im->ddr.csbnds[0].csbnds = CFG_DDR_CS0_BNDS;
|
|
im->ddr.cs_config[0] = CFG_DDR_CS0_CONFIG;
|
|
im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0;
|
|
im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
|
|
im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;
|
|
im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3;
|
|
im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG;
|
|
im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2;
|
|
im->ddr.sdram_mode = CFG_DDR_MODE;
|
|
im->ddr.sdram_mode2 = CFG_DDR_MODE2;
|
|
im->ddr.sdram_interval = CFG_DDR_INTERVAL;
|
|
im->ddr.sdram_clk_cntl = CFG_DDR_CLK_CNTL;
|
|
#else
|
|
im->ddr.csbnds[0].csbnds = 0x00000007;
|
|
im->ddr.csbnds[1].csbnds = 0x0008000f;
|
|
|
|
im->ddr.cs_config[0] = CFG_DDR_CONFIG;
|
|
im->ddr.cs_config[1] = CFG_DDR_CONFIG;
|
|
|
|
im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
|
|
im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;
|
|
im->ddr.sdram_cfg = CFG_DDR_CONTROL;
|
|
|
|
im->ddr.sdram_mode = CFG_DDR_MODE;
|
|
im->ddr.sdram_interval = CFG_DDR_INTERVAL;
|
|
#endif
|
|
udelay(200);
|
|
im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
|
|
|
|
return msize;
|
|
}
|
|
#endif /*!CFG_SPD_EEPROM */
|
|
|
|
int checkboard(void)
|
|
{
|
|
puts("Board: Freescale MPC8360EMDS\n");
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* if MPC8360EMDS is soldered with SDRAM
|
|
*/
|
|
#if defined(CFG_BR2_PRELIM) \
|
|
&& defined(CFG_OR2_PRELIM) \
|
|
&& defined(CFG_LBLAWBAR2_PRELIM) \
|
|
&& defined(CFG_LBLAWAR2_PRELIM)
|
|
/*
|
|
* Initialize SDRAM memory on the Local Bus.
|
|
*/
|
|
|
|
void sdram_init(void)
|
|
{
|
|
volatile immap_t *immap = (immap_t *) CFG_IMMR;
|
|
volatile lbus83xx_t *lbc = &immap->lbus;
|
|
uint *sdram_addr = (uint *) CFG_LBC_SDRAM_BASE;
|
|
|
|
puts("\n SDRAM on Local Bus: ");
|
|
print_size(CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
|
|
/*
|
|
* Setup SDRAM Base and Option Registers, already done in cpu_init.c
|
|
*/
|
|
/*setup mtrpt, lsrt and lbcr for LB bus */
|
|
lbc->lbcr = CFG_LBC_LBCR;
|
|
lbc->mrtpr = CFG_LBC_MRTPR;
|
|
lbc->lsrt = CFG_LBC_LSRT;
|
|
asm("sync");
|
|
|
|
/*
|
|
* Configure the SDRAM controller Machine Mode Register.
|
|
*/
|
|
lbc->lsdmr = CFG_LBC_LSDMR_5; /* Normal Operation */
|
|
lbc->lsdmr = CFG_LBC_LSDMR_1; /* Precharge All Banks */
|
|
asm("sync");
|
|
*sdram_addr = 0xff;
|
|
udelay(100);
|
|
|
|
/*
|
|
* We need do 8 times auto refresh operation.
|
|
*/
|
|
lbc->lsdmr = CFG_LBC_LSDMR_2;
|
|
asm("sync");
|
|
*sdram_addr = 0xff; /* 1 times */
|
|
udelay(100);
|
|
*sdram_addr = 0xff; /* 2 times */
|
|
udelay(100);
|
|
*sdram_addr = 0xff; /* 3 times */
|
|
udelay(100);
|
|
*sdram_addr = 0xff; /* 4 times */
|
|
udelay(100);
|
|
*sdram_addr = 0xff; /* 5 times */
|
|
udelay(100);
|
|
*sdram_addr = 0xff; /* 6 times */
|
|
udelay(100);
|
|
*sdram_addr = 0xff; /* 7 times */
|
|
udelay(100);
|
|
*sdram_addr = 0xff; /* 8 times */
|
|
udelay(100);
|
|
|
|
/* Mode register write operation */
|
|
lbc->lsdmr = CFG_LBC_LSDMR_4;
|
|
asm("sync");
|
|
*(sdram_addr + 0xcc) = 0xff;
|
|
udelay(100);
|
|
|
|
/* Normal operation */
|
|
lbc->lsdmr = CFG_LBC_LSDMR_5 | 0x40000000;
|
|
asm("sync");
|
|
*sdram_addr = 0xff;
|
|
udelay(100);
|
|
}
|
|
#else
|
|
void sdram_init(void)
|
|
{
|
|
puts("SDRAM on Local Bus is NOT available!\n");
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD)
|
|
/*
|
|
* ECC user commands
|
|
*/
|
|
void ecc_print_status(void)
|
|
{
|
|
volatile immap_t *immap = (immap_t *) CFG_IMMR;
|
|
volatile ddr83xx_t *ddr = &immap->ddr;
|
|
|
|
printf("\nECC mode: %s\n\n",
|
|
(ddr->sdram_cfg & SDRAM_CFG_ECC_EN) ? "ON" : "OFF");
|
|
|
|
/* Interrupts */
|
|
printf("Memory Error Interrupt Enable:\n");
|
|
printf(" Multiple-Bit Error Interrupt Enable: %d\n",
|
|
(ddr->err_int_en & ECC_ERR_INT_EN_MBEE) ? 1 : 0);
|
|
printf(" Single-Bit Error Interrupt Enable: %d\n",
|
|
(ddr->err_int_en & ECC_ERR_INT_EN_SBEE) ? 1 : 0);
|
|
printf(" Memory Select Error Interrupt Enable: %d\n\n",
|
|
(ddr->err_int_en & ECC_ERR_INT_EN_MSEE) ? 1 : 0);
|
|
|
|
/* Error disable */
|
|
printf("Memory Error Disable:\n");
|
|
printf(" Multiple-Bit Error Disable: %d\n",
|
|
(ddr->err_disable & ECC_ERROR_DISABLE_MBED) ? 1 : 0);
|
|
printf(" Sinle-Bit Error Disable: %d\n",
|
|
(ddr->err_disable & ECC_ERROR_DISABLE_SBED) ? 1 : 0);
|
|
printf(" Memory Select Error Disable: %d\n\n",
|
|
(ddr->err_disable & ECC_ERROR_DISABLE_MSED) ? 1 : 0);
|
|
|
|
/* Error injection */
|
|
printf("Memory Data Path Error Injection Mask High/Low: %08lx %08lx\n",
|
|
ddr->data_err_inject_hi, ddr->data_err_inject_lo);
|
|
|
|
printf("Memory Data Path Error Injection Mask ECC:\n");
|
|
printf(" ECC Mirror Byte: %d\n",
|
|
(ddr->ecc_err_inject & ECC_ERR_INJECT_EMB) ? 1 : 0);
|
|
printf(" ECC Injection Enable: %d\n",
|
|
(ddr->ecc_err_inject & ECC_ERR_INJECT_EIEN) ? 1 : 0);
|
|
printf(" ECC Error Injection Mask: 0x%02x\n\n",
|
|
ddr->ecc_err_inject & ECC_ERR_INJECT_EEIM);
|
|
|
|
/* SBE counter/threshold */
|
|
printf("Memory Single-Bit Error Management (0..255):\n");
|
|
printf(" Single-Bit Error Threshold: %d\n",
|
|
(ddr->err_sbe & ECC_ERROR_MAN_SBET) >> ECC_ERROR_MAN_SBET_SHIFT);
|
|
printf(" Single-Bit Error Counter: %d\n\n",
|
|
(ddr->err_sbe & ECC_ERROR_MAN_SBEC) >> ECC_ERROR_MAN_SBEC_SHIFT);
|
|
|
|
/* Error detect */
|
|
printf("Memory Error Detect:\n");
|
|
printf(" Multiple Memory Errors: %d\n",
|
|
(ddr->err_detect & ECC_ERROR_DETECT_MME) ? 1 : 0);
|
|
printf(" Multiple-Bit Error: %d\n",
|
|
(ddr->err_detect & ECC_ERROR_DETECT_MBE) ? 1 : 0);
|
|
printf(" Single-Bit Error: %d\n",
|
|
(ddr->err_detect & ECC_ERROR_DETECT_SBE) ? 1 : 0);
|
|
printf(" Memory Select Error: %d\n\n",
|
|
(ddr->err_detect & ECC_ERROR_DETECT_MSE) ? 1 : 0);
|
|
|
|
/* Capture data */
|
|
printf("Memory Error Address Capture: 0x%08lx\n", ddr->capture_address);
|
|
printf("Memory Data Path Read Capture High/Low: %08lx %08lx\n",
|
|
ddr->capture_data_hi, ddr->capture_data_lo);
|
|
printf("Memory Data Path Read Capture ECC: 0x%02x\n\n",
|
|
ddr->capture_ecc & CAPTURE_ECC_ECE);
|
|
|
|
printf("Memory Error Attributes Capture:\n");
|
|
printf(" Data Beat Number: %d\n",
|
|
(ddr->capture_attributes & ECC_CAPT_ATTR_BNUM) >>
|
|
ECC_CAPT_ATTR_BNUM_SHIFT);
|
|
printf(" Transaction Size: %d\n",
|
|
(ddr->capture_attributes & ECC_CAPT_ATTR_TSIZ) >>
|
|
ECC_CAPT_ATTR_TSIZ_SHIFT);
|
|
printf(" Transaction Source: %d\n",
|
|
(ddr->capture_attributes & ECC_CAPT_ATTR_TSRC) >>
|
|
ECC_CAPT_ATTR_TSRC_SHIFT);
|
|
printf(" Transaction Type: %d\n",
|
|
(ddr->capture_attributes & ECC_CAPT_ATTR_TTYP) >>
|
|
ECC_CAPT_ATTR_TTYP_SHIFT);
|
|
printf(" Error Information Valid: %d\n\n",
|
|
ddr->capture_attributes & ECC_CAPT_ATTR_VLD);
|
|
}
|
|
|
|
int do_ecc(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
|
|
{
|
|
volatile immap_t *immap = (immap_t *) CFG_IMMR;
|
|
volatile ddr83xx_t *ddr = &immap->ddr;
|
|
volatile u32 val;
|
|
u64 *addr;
|
|
u32 count;
|
|
register u64 *i;
|
|
u32 ret[2];
|
|
u32 pattern[2];
|
|
u32 writeback[2];
|
|
|
|
/* The pattern is written into memory to generate error */
|
|
pattern[0] = 0xfedcba98UL;
|
|
pattern[1] = 0x76543210UL;
|
|
|
|
/* After injecting error, re-initialize the memory with the value */
|
|
writeback[0] = 0x01234567UL;
|
|
writeback[1] = 0x89abcdefUL;
|
|
|
|
if (argc > 4) {
|
|
printf("Usage:\n%s\n", cmdtp->usage);
|
|
return 1;
|
|
}
|
|
|
|
if (argc == 2) {
|
|
if (strcmp(argv[1], "status") == 0) {
|
|
ecc_print_status();
|
|
return 0;
|
|
} else if (strcmp(argv[1], "captureclear") == 0) {
|
|
ddr->capture_address = 0;
|
|
ddr->capture_data_hi = 0;
|
|
ddr->capture_data_lo = 0;
|
|
ddr->capture_ecc = 0;
|
|
ddr->capture_attributes = 0;
|
|
return 0;
|
|
}
|
|
}
|
|
if (argc == 3) {
|
|
if (strcmp(argv[1], "sbecnt") == 0) {
|
|
val = simple_strtoul(argv[2], NULL, 10);
|
|
if (val > 255) {
|
|
printf("Incorrect Counter value, "
|
|
"should be 0..255\n");
|
|
return 1;
|
|
}
|
|
|
|
val = (val << ECC_ERROR_MAN_SBEC_SHIFT);
|
|
val |= (ddr->err_sbe & ECC_ERROR_MAN_SBET);
|
|
|
|
ddr->err_sbe = val;
|
|
return 0;
|
|
} else if (strcmp(argv[1], "sbethr") == 0) {
|
|
val = simple_strtoul(argv[2], NULL, 10);
|
|
if (val > 255) {
|
|
printf("Incorrect Counter value, "
|
|
"should be 0..255\n");
|
|
return 1;
|
|
}
|
|
|
|
val = (val << ECC_ERROR_MAN_SBET_SHIFT);
|
|
val |= (ddr->err_sbe & ECC_ERROR_MAN_SBEC);
|
|
|
|
ddr->err_sbe = val;
|
|
return 0;
|
|
} else if (strcmp(argv[1], "errdisable") == 0) {
|
|
val = ddr->err_disable;
|
|
|
|
if (strcmp(argv[2], "+sbe") == 0) {
|
|
val |= ECC_ERROR_DISABLE_SBED;
|
|
} else if (strcmp(argv[2], "+mbe") == 0) {
|
|
val |= ECC_ERROR_DISABLE_MBED;
|
|
} else if (strcmp(argv[2], "+mse") == 0) {
|
|
val |= ECC_ERROR_DISABLE_MSED;
|
|
} else if (strcmp(argv[2], "+all") == 0) {
|
|
val |= (ECC_ERROR_DISABLE_SBED |
|
|
ECC_ERROR_DISABLE_MBED |
|
|
ECC_ERROR_DISABLE_MSED);
|
|
} else if (strcmp(argv[2], "-sbe") == 0) {
|
|
val &= ~ECC_ERROR_DISABLE_SBED;
|
|
} else if (strcmp(argv[2], "-mbe") == 0) {
|
|
val &= ~ECC_ERROR_DISABLE_MBED;
|
|
} else if (strcmp(argv[2], "-mse") == 0) {
|
|
val &= ~ECC_ERROR_DISABLE_MSED;
|
|
} else if (strcmp(argv[2], "-all") == 0) {
|
|
val &= ~(ECC_ERROR_DISABLE_SBED |
|
|
ECC_ERROR_DISABLE_MBED |
|
|
ECC_ERROR_DISABLE_MSED);
|
|
} else {
|
|
printf("Incorrect err_disable field\n");
|
|
return 1;
|
|
}
|
|
|
|
ddr->err_disable = val;
|
|
__asm__ __volatile__("sync");
|
|
__asm__ __volatile__("isync");
|
|
return 0;
|
|
} else if (strcmp(argv[1], "errdetectclr") == 0) {
|
|
val = ddr->err_detect;
|
|
|
|
if (strcmp(argv[2], "mme") == 0) {
|
|
val |= ECC_ERROR_DETECT_MME;
|
|
} else if (strcmp(argv[2], "sbe") == 0) {
|
|
val |= ECC_ERROR_DETECT_SBE;
|
|
} else if (strcmp(argv[2], "mbe") == 0) {
|
|
val |= ECC_ERROR_DETECT_MBE;
|
|
} else if (strcmp(argv[2], "mse") == 0) {
|
|
val |= ECC_ERROR_DETECT_MSE;
|
|
} else if (strcmp(argv[2], "all") == 0) {
|
|
val |= (ECC_ERROR_DETECT_MME |
|
|
ECC_ERROR_DETECT_MBE |
|
|
ECC_ERROR_DETECT_SBE |
|
|
ECC_ERROR_DETECT_MSE);
|
|
} else {
|
|
printf("Incorrect err_detect field\n");
|
|
return 1;
|
|
}
|
|
|
|
ddr->err_detect = val;
|
|
return 0;
|
|
} else if (strcmp(argv[1], "injectdatahi") == 0) {
|
|
val = simple_strtoul(argv[2], NULL, 16);
|
|
|
|
ddr->data_err_inject_hi = val;
|
|
return 0;
|
|
} else if (strcmp(argv[1], "injectdatalo") == 0) {
|
|
val = simple_strtoul(argv[2], NULL, 16);
|
|
|
|
ddr->data_err_inject_lo = val;
|
|
return 0;
|
|
} else if (strcmp(argv[1], "injectecc") == 0) {
|
|
val = simple_strtoul(argv[2], NULL, 16);
|
|
if (val > 0xff) {
|
|
printf("Incorrect ECC inject mask, "
|
|
"should be 0x00..0xff\n");
|
|
return 1;
|
|
}
|
|
val |= (ddr->ecc_err_inject & ~ECC_ERR_INJECT_EEIM);
|
|
|
|
ddr->ecc_err_inject = val;
|
|
return 0;
|
|
} else if (strcmp(argv[1], "inject") == 0) {
|
|
val = ddr->ecc_err_inject;
|
|
|
|
if (strcmp(argv[2], "en") == 0)
|
|
val |= ECC_ERR_INJECT_EIEN;
|
|
else if (strcmp(argv[2], "dis") == 0)
|
|
val &= ~ECC_ERR_INJECT_EIEN;
|
|
else
|
|
printf("Incorrect command\n");
|
|
|
|
ddr->ecc_err_inject = val;
|
|
__asm__ __volatile__("sync");
|
|
__asm__ __volatile__("isync");
|
|
return 0;
|
|
} else if (strcmp(argv[1], "mirror") == 0) {
|
|
val = ddr->ecc_err_inject;
|
|
|
|
if (strcmp(argv[2], "en") == 0)
|
|
val |= ECC_ERR_INJECT_EMB;
|
|
else if (strcmp(argv[2], "dis") == 0)
|
|
val &= ~ECC_ERR_INJECT_EMB;
|
|
else
|
|
printf("Incorrect command\n");
|
|
|
|
ddr->ecc_err_inject = val;
|
|
return 0;
|
|
}
|
|
}
|
|
if (argc == 4) {
|
|
if (strcmp(argv[1], "testdw") == 0) {
|
|
addr = (u64 *) simple_strtoul(argv[2], NULL, 16);
|
|
count = simple_strtoul(argv[3], NULL, 16);
|
|
|
|
if ((u32) addr % 8) {
|
|
printf("Address not alligned on "
|
|
"double word boundary\n");
|
|
return 1;
|
|
}
|
|
disable_interrupts();
|
|
|
|
for (i = addr; i < addr + count; i++) {
|
|
|
|
/* enable injects */
|
|
ddr->ecc_err_inject |= ECC_ERR_INJECT_EIEN;
|
|
__asm__ __volatile__("sync");
|
|
__asm__ __volatile__("isync");
|
|
|
|
/* write memory location injecting errors */
|
|
ppcDWstore((u32 *) i, pattern);
|
|
__asm__ __volatile__("sync");
|
|
|
|
/* disable injects */
|
|
ddr->ecc_err_inject &= ~ECC_ERR_INJECT_EIEN;
|
|
__asm__ __volatile__("sync");
|
|
__asm__ __volatile__("isync");
|
|
|
|
/* read data, this generates ECC error */
|
|
ppcDWload((u32 *) i, ret);
|
|
__asm__ __volatile__("sync");
|
|
|
|
/* re-initialize memory, double word write the location again,
|
|
* generates new ECC code this time */
|
|
ppcDWstore((u32 *) i, writeback);
|
|
__asm__ __volatile__("sync");
|
|
}
|
|
enable_interrupts();
|
|
return 0;
|
|
}
|
|
if (strcmp(argv[1], "testword") == 0) {
|
|
addr = (u64 *) simple_strtoul(argv[2], NULL, 16);
|
|
count = simple_strtoul(argv[3], NULL, 16);
|
|
|
|
if ((u32) addr % 8) {
|
|
printf("Address not alligned on "
|
|
"double word boundary\n");
|
|
return 1;
|
|
}
|
|
disable_interrupts();
|
|
|
|
for (i = addr; i < addr + count; i++) {
|
|
|
|
/* enable injects */
|
|
ddr->ecc_err_inject |= ECC_ERR_INJECT_EIEN;
|
|
__asm__ __volatile__("sync");
|
|
__asm__ __volatile__("isync");
|
|
|
|
/* write memory location injecting errors */
|
|
*(u32 *) i = 0xfedcba98UL;
|
|
__asm__ __volatile__("sync");
|
|
|
|
/* sub double word write,
|
|
* bus will read-modify-write,
|
|
* generates ECC error */
|
|
*((u32 *) i + 1) = 0x76543210UL;
|
|
__asm__ __volatile__("sync");
|
|
|
|
/* disable injects */
|
|
ddr->ecc_err_inject &= ~ECC_ERR_INJECT_EIEN;
|
|
__asm__ __volatile__("sync");
|
|
__asm__ __volatile__("isync");
|
|
|
|
/* re-initialize memory,
|
|
* double word write the location again,
|
|
* generates new ECC code this time */
|
|
ppcDWstore((u32 *) i, writeback);
|
|
__asm__ __volatile__("sync");
|
|
}
|
|
enable_interrupts();
|
|
return 0;
|
|
}
|
|
}
|
|
printf("Usage:\n%s\n", cmdtp->usage);
|
|
return 1;
|
|
}
|
|
|
|
U_BOOT_CMD(ecc, 4, 0, do_ecc,
|
|
"ecc - support for DDR ECC features\n",
|
|
"status - print out status info\n"
|
|
"ecc captureclear - clear capture regs data\n"
|
|
"ecc sbecnt <val> - set Single-Bit Error counter\n"
|
|
"ecc sbethr <val> - set Single-Bit Threshold\n"
|
|
"ecc errdisable <flag> - clear/set disable Memory Error Disable, flag:\n"
|
|
" [-|+]sbe - Single-Bit Error\n"
|
|
" [-|+]mbe - Multiple-Bit Error\n"
|
|
" [-|+]mse - Memory Select Error\n"
|
|
" [-|+]all - all errors\n"
|
|
"ecc errdetectclr <flag> - clear Memory Error Detect, flag:\n"
|
|
" mme - Multiple Memory Errors\n"
|
|
" sbe - Single-Bit Error\n"
|
|
" mbe - Multiple-Bit Error\n"
|
|
" mse - Memory Select Error\n"
|
|
" all - all errors\n"
|
|
"ecc injectdatahi <hi> - set Memory Data Path Error Injection Mask High\n"
|
|
"ecc injectdatalo <lo> - set Memory Data Path Error Injection Mask Low\n"
|
|
"ecc injectecc <ecc> - set ECC Error Injection Mask\n"
|
|
"ecc inject <en|dis> - enable/disable error injection\n"
|
|
"ecc mirror <en|dis> - enable/disable mirror byte\n"
|
|
"ecc testdw <addr> <cnt> - test mem region with double word access:\n"
|
|
" - enables injects\n"
|
|
" - writes pattern injecting errors with double word access\n"
|
|
" - disables injects\n"
|
|
" - reads pattern back with double word access, generates error\n"
|
|
" - re-inits memory\n"
|
|
"ecc testword <addr> <cnt> - test mem region with word access:\n"
|
|
" - enables injects\n"
|
|
" - writes pattern injecting errors with word access\n"
|
|
" - writes pattern with word access, generates error\n"
|
|
" - disables injects\n" " - re-inits memory");
|
|
#endif /* if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD) */
|
|
|
|
#if (defined(CONFIG_OF_FLAT_TREE) || defined(CONFIG_OF_LIBFDT)) \
|
|
&& defined(CONFIG_OF_BOARD_SETUP)
|
|
|
|
/*
|
|
* Prototypes of functions that we use.
|
|
*/
|
|
void ft_cpu_setup(void *blob, bd_t *bd);
|
|
|
|
#ifdef CONFIG_PCI
|
|
void ft_pci_setup(void *blob, bd_t *bd);
|
|
#endif
|
|
|
|
void
|
|
ft_board_setup(void *blob, bd_t *bd)
|
|
{
|
|
#if defined(CONFIG_OF_LIBFDT)
|
|
int nodeoffset;
|
|
int tmp[2];
|
|
|
|
nodeoffset = fdt_path_offset (fdt, "/memory");
|
|
if (nodeoffset >= 0) {
|
|
tmp[0] = cpu_to_be32(bd->bi_memstart);
|
|
tmp[1] = cpu_to_be32(bd->bi_memsize);
|
|
fdt_setprop(fdt, nodeoffset, "reg", tmp, sizeof(tmp));
|
|
}
|
|
#else
|
|
u32 *p;
|
|
int len;
|
|
|
|
p = ft_get_prop(blob, "/memory/reg", &len);
|
|
if (p != NULL) {
|
|
*p++ = cpu_to_be32(bd->bi_memstart);
|
|
*p = cpu_to_be32(bd->bi_memsize);
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_PCI
|
|
ft_pci_setup(blob, bd);
|
|
#endif
|
|
ft_cpu_setup(blob, bd);
|
|
}
|
|
#endif /* CONFIG_OF_x */
|
|
|