upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/arch/sparc/lib/bootm.c

184 lines
5.3 KiB

/* SPARC code for booting linux 2.6
*
* (C) Copyright 2007
* Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <command.h>
#include <asm/byteorder.h>
#include <asm/prom.h>
#include <asm/cache.h>
#include <image.h>
#define PRINT_KERNEL_HEADER
extern image_header_t header;
extern void srmmu_init_cpu(unsigned int entry);
extern void prepare_bootargs(char *bootargs);
#ifdef CONFIG_USB_UHCI
extern int usb_lowlevel_stop(int index);
#endif
/* sparc kernel argument (the ROM vector) */
struct linux_romvec *kernel_arg_promvec;
/* page szie is 4k */
#define PAGE_SIZE 0x1000
#define RAMDISK_IMAGE_START_MASK 0x07FF
#define RAMDISK_PROMPT_FLAG 0x8000
#define RAMDISK_LOAD_FLAG 0x4000
struct __attribute__ ((packed)) {
char traptable[PAGE_SIZE];
char swapper_pg_dir[PAGE_SIZE];
char pg0[PAGE_SIZE];
char pg1[PAGE_SIZE];
char pg2[PAGE_SIZE];
char pg3[PAGE_SIZE];
char empty_bad_page[PAGE_SIZE];
char empty_bad_page_table[PAGE_SIZE];
char empty_zero_page[PAGE_SIZE];
unsigned char hdr[4]; /* ascii "HdrS" */
/* 00.02.06.0b is for Linux kernel 2.6.11 */
unsigned char linuxver_mega_major;
unsigned char linuxver_major;
unsigned char linuxver_minor;
unsigned char linuxver_revision;
/* header version 0x0203 */
unsigned short hdr_ver;
union __attribute__ ((packed)) {
struct __attribute__ ((packed)) {
unsigned short root_flags;
unsigned short root_dev;
unsigned short ram_flags;
unsigned int sparc_ramdisk_image;
unsigned int sparc_ramdisk_size;
unsigned int reboot_command;
unsigned int resv[3];
unsigned int end;
} ver_0203;
} hdr_input;
} *linux_hdr;
/* temporary initrd image holder */
image_header_t ihdr;
void arch_lmb_reserve(struct lmb *lmb)
{
/* Reserve the space used by PROM and stack. This is done
* to avoid that the RAM image is copied over stack or
* PROM.
*/
lmb_reserve(lmb, CONFIG_SYS_RELOC_MONITOR_BASE, CONFIG_SYS_RAM_END);
}
/* boot the linux kernel */
int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t * images)
{
char *bootargs;
ulong rd_len;
void (*kernel) (struct linux_romvec *, void *);
int ret;
if ((flag != 0) && (flag != BOOTM_STATE_OS_GO))
return 1;
/* Get virtual address of kernel start */
linux_hdr = (void *)images->os.load;
/* */
kernel = (void (*)(struct linux_romvec *, void *))images->ep;
/* check for a SPARC kernel */
if ((linux_hdr->hdr[0] != 'H') ||
(linux_hdr->hdr[1] != 'd') ||
(linux_hdr->hdr[2] != 'r') || (linux_hdr->hdr[3] != 'S')) {
puts("Error reading header of SPARC Linux kernel, aborting\n");
goto error;
}
#ifdef PRINT_KERNEL_HEADER
printf("## Found SPARC Linux kernel %d.%d.%d ...\n",
linux_hdr->linuxver_major,
linux_hdr->linuxver_minor, linux_hdr->linuxver_revision);
#endif
#ifdef CONFIG_USB_UHCI
usb_lowlevel_stop();
#endif
/* set basic boot params in kernel header now that it has been
* extracted and is writeable.
*/
ret = image_setup_linux(images);
if (ret) {
puts("### Failed to relocate RAM disk\n");
goto error;
}
/* Calc length of RAM disk, if zero no ramdisk available */
rd_len = images->rd_end - images->rd_start;
if (rd_len) {
/* Update SPARC kernel header so that Linux knows
* what is going on and where to find RAM disk.
*
* Set INITRD Image address relative to RAM Start
*/
linux_hdr->hdr_input.ver_0203.sparc_ramdisk_image =
images->initrd_start - CONFIG_SYS_RAM_BASE;
linux_hdr->hdr_input.ver_0203.sparc_ramdisk_size = rd_len;
/* Clear READ ONLY flag if set to non-zero */
linux_hdr->hdr_input.ver_0203.root_flags = 1;
/* Set root device to: Root_RAM0 */
linux_hdr->hdr_input.ver_0203.root_dev = 0x100;
linux_hdr->hdr_input.ver_0203.ram_flags = 0;
} else {
/* NOT using RAMDISK image, overwriting kernel defaults */
linux_hdr->hdr_input.ver_0203.sparc_ramdisk_image = 0;
linux_hdr->hdr_input.ver_0203.sparc_ramdisk_size = 0;
/* Leave to kernel defaults
linux_hdr->hdr_input.ver_0203.root_flags = 1;
linux_hdr->hdr_input.ver_0203.root_dev = 0;
linux_hdr->hdr_input.ver_0203.ram_flags = 0;
*/
}
/* Copy bootargs from bootargs variable to kernel readable area */
bootargs = getenv("bootargs");
prepare_bootargs(bootargs);
/* turn on mmu & setup context table & page table for process 0 (kernel) */
srmmu_init_cpu((unsigned int)kernel);
/* Enter SPARC Linux kernel
* From now on the only code in u-boot that will be
* executed is the PROM code.
*/
kernel(kernel_arg_promvec, (void *)images->ep);
/* It will never come to this... */
while (1) ;
error:
return 1;
}