upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
126 lines
3.0 KiB
126 lines
3.0 KiB
/*
|
|
* Copyright 2009-2011 Freescale Semiconductor, Inc.
|
|
* Andy Fleming <afleming@gmail.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
* Some part is taken from tsec.c
|
|
*/
|
|
#include <common.h>
|
|
#include <miiphy.h>
|
|
#include <phy.h>
|
|
#include <asm/io.h>
|
|
#include <fsl_tgec.h>
|
|
#include <fm_eth.h>
|
|
|
|
/*
|
|
* Write value to the PHY for this device to the register at regnum, waiting
|
|
* until the write is done before it returns. All PHY configuration has to be
|
|
* done through the TSEC1 MIIM regs
|
|
*/
|
|
static int tgec_mdio_write(struct mii_dev *bus, int port_addr, int dev_addr,
|
|
int regnum, u16 value)
|
|
{
|
|
u32 mdio_ctl;
|
|
u32 stat_val;
|
|
struct tgec_mdio_controller *regs = bus->priv;
|
|
|
|
if (dev_addr == MDIO_DEVAD_NONE)
|
|
return 0;
|
|
|
|
/* Wait till the bus is free */
|
|
stat_val = MDIO_STAT_CLKDIV(100);
|
|
out_be32(®s->mdio_stat, stat_val);
|
|
while ((in_be32(®s->mdio_stat)) & MDIO_STAT_BSY)
|
|
;
|
|
|
|
/* Set the port and dev addr */
|
|
mdio_ctl = MDIO_CTL_PORT_ADDR(port_addr) | MDIO_CTL_DEV_ADDR(dev_addr);
|
|
out_be32(®s->mdio_ctl, mdio_ctl);
|
|
|
|
/* Set the register address */
|
|
out_be32(®s->mdio_addr, regnum & 0xffff);
|
|
|
|
/* Wait till the bus is free */
|
|
while ((in_be32(®s->mdio_stat)) & MDIO_STAT_BSY)
|
|
;
|
|
|
|
/* Write the value to the register */
|
|
out_be32(®s->mdio_data, MDIO_DATA(value));
|
|
|
|
/* Wait till the MDIO write is complete */
|
|
while ((in_be32(®s->mdio_data)) & MDIO_DATA_BSY)
|
|
;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Reads from register regnum in the PHY for device dev, returning the value.
|
|
* Clears miimcom first. All PHY configuration has to be done through the
|
|
* TSEC1 MIIM regs
|
|
*/
|
|
static int tgec_mdio_read(struct mii_dev *bus, int port_addr, int dev_addr,
|
|
int regnum)
|
|
{
|
|
u32 mdio_ctl;
|
|
u32 stat_val;
|
|
struct tgec_mdio_controller *regs = bus->priv;
|
|
|
|
if (dev_addr == MDIO_DEVAD_NONE)
|
|
return 0xffff;
|
|
|
|
stat_val = MDIO_STAT_CLKDIV(100);
|
|
out_be32(®s->mdio_stat, stat_val);
|
|
/* Wait till the bus is free */
|
|
while ((in_be32(®s->mdio_stat)) & MDIO_STAT_BSY)
|
|
;
|
|
|
|
/* Set the Port and Device Addrs */
|
|
mdio_ctl = MDIO_CTL_PORT_ADDR(port_addr) | MDIO_CTL_DEV_ADDR(dev_addr);
|
|
out_be32(®s->mdio_ctl, mdio_ctl);
|
|
|
|
/* Set the register address */
|
|
out_be32(®s->mdio_addr, regnum & 0xffff);
|
|
|
|
/* Wait till the bus is free */
|
|
while ((in_be32(®s->mdio_stat)) & MDIO_STAT_BSY)
|
|
;
|
|
|
|
/* Initiate the read */
|
|
mdio_ctl |= MDIO_CTL_READ;
|
|
out_be32(®s->mdio_ctl, mdio_ctl);
|
|
|
|
/* Wait till the MDIO write is complete */
|
|
while ((in_be32(®s->mdio_data)) & MDIO_DATA_BSY)
|
|
;
|
|
|
|
/* Return all Fs if nothing was there */
|
|
if (in_be32(®s->mdio_stat) & MDIO_STAT_RD_ER)
|
|
return 0xffff;
|
|
|
|
return in_be32(®s->mdio_data) & 0xffff;
|
|
}
|
|
|
|
static int tgec_mdio_reset(struct mii_dev *bus)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
int fm_tgec_mdio_init(bd_t *bis, struct tgec_mdio_info *info)
|
|
{
|
|
struct mii_dev *bus = mdio_alloc();
|
|
|
|
if (!bus) {
|
|
printf("Failed to allocate FM TGEC MDIO bus\n");
|
|
return -1;
|
|
}
|
|
|
|
bus->read = tgec_mdio_read;
|
|
bus->write = tgec_mdio_write;
|
|
bus->reset = tgec_mdio_reset;
|
|
strcpy(bus->name, info->name);
|
|
|
|
bus->priv = info->regs;
|
|
|
|
return mdio_register(bus);
|
|
}
|
|
|