upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
99 lines
2.4 KiB
99 lines
2.4 KiB
/*
|
|
* Copyright 2015 Freescale Semiconductor, Inc.
|
|
*
|
|
* DWC3 controller driver
|
|
*
|
|
* Author: Ramneek Mehresh<ramneek.mehresh@freescale.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <linux/usb/dwc3.h>
|
|
|
|
void dwc3_set_mode(struct dwc3 *dwc3_reg, u32 mode)
|
|
{
|
|
clrsetbits_le32(&dwc3_reg->g_ctl,
|
|
DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG),
|
|
DWC3_GCTL_PRTCAPDIR(mode));
|
|
}
|
|
|
|
void dwc3_phy_reset(struct dwc3 *dwc3_reg)
|
|
{
|
|
/* Assert USB3 PHY reset */
|
|
setbits_le32(&dwc3_reg->g_usb3pipectl[0], DWC3_GUSB3PIPECTL_PHYSOFTRST);
|
|
|
|
/* Assert USB2 PHY reset */
|
|
setbits_le32(&dwc3_reg->g_usb2phycfg, DWC3_GUSB2PHYCFG_PHYSOFTRST);
|
|
|
|
mdelay(100);
|
|
|
|
/* Clear USB3 PHY reset */
|
|
clrbits_le32(&dwc3_reg->g_usb3pipectl[0], DWC3_GUSB3PIPECTL_PHYSOFTRST);
|
|
|
|
/* Clear USB2 PHY reset */
|
|
clrbits_le32(&dwc3_reg->g_usb2phycfg, DWC3_GUSB2PHYCFG_PHYSOFTRST);
|
|
}
|
|
|
|
void dwc3_core_soft_reset(struct dwc3 *dwc3_reg)
|
|
{
|
|
/* Before Resetting PHY, put Core in Reset */
|
|
setbits_le32(&dwc3_reg->g_ctl, DWC3_GCTL_CORESOFTRESET);
|
|
|
|
/* reset USB3 phy - if required */
|
|
dwc3_phy_reset(dwc3_reg);
|
|
|
|
mdelay(100);
|
|
|
|
/* After PHYs are stable we can take Core out of reset state */
|
|
clrbits_le32(&dwc3_reg->g_ctl, DWC3_GCTL_CORESOFTRESET);
|
|
}
|
|
|
|
int dwc3_core_init(struct dwc3 *dwc3_reg)
|
|
{
|
|
u32 reg;
|
|
u32 revision;
|
|
unsigned int dwc3_hwparams1;
|
|
|
|
revision = readl(&dwc3_reg->g_snpsid);
|
|
/* This should read as U3 followed by revision number */
|
|
if ((revision & DWC3_GSNPSID_MASK) != 0x55330000) {
|
|
puts("this is not a DesignWare USB3 DRD Core\n");
|
|
return -1;
|
|
}
|
|
|
|
dwc3_core_soft_reset(dwc3_reg);
|
|
|
|
dwc3_hwparams1 = readl(&dwc3_reg->g_hwparams1);
|
|
|
|
reg = readl(&dwc3_reg->g_ctl);
|
|
reg &= ~DWC3_GCTL_SCALEDOWN_MASK;
|
|
reg &= ~DWC3_GCTL_DISSCRAMBLE;
|
|
switch (DWC3_GHWPARAMS1_EN_PWROPT(dwc3_hwparams1)) {
|
|
case DWC3_GHWPARAMS1_EN_PWROPT_CLK:
|
|
reg &= ~DWC3_GCTL_DSBLCLKGTNG;
|
|
break;
|
|
default:
|
|
debug("No power optimization available\n");
|
|
}
|
|
|
|
/*
|
|
* WORKAROUND: DWC3 revisions <1.90a have a bug
|
|
* where the device can fail to connect at SuperSpeed
|
|
* and falls back to high-speed mode which causes
|
|
* the device to enter a Connect/Disconnect loop
|
|
*/
|
|
if ((revision & DWC3_REVISION_MASK) < 0x190a)
|
|
reg |= DWC3_GCTL_U2RSTECN;
|
|
|
|
writel(reg, &dwc3_reg->g_ctl);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void dwc3_set_fladj(struct dwc3 *dwc3_reg, u32 val)
|
|
{
|
|
setbits_le32(&dwc3_reg->g_fladj, GFLADJ_30MHZ_REG_SEL |
|
|
GFLADJ_30MHZ(val));
|
|
}
|
|
|