upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
74 lines
2.2 KiB
74 lines
2.2 KiB
/*
|
|
* TI's Davinci platform specific USB wrapper functions.
|
|
*
|
|
* Copyright (c) 2008 Texas Instruments
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*
|
|
* Author: Thomas Abraham t-abraham@ti.com, Texas Instruments
|
|
*/
|
|
|
|
#ifndef __DAVINCI_USB_H__
|
|
#define __DAVINCI_USB_H__
|
|
|
|
#include <asm/arch/hardware.h>
|
|
#include "musb_core.h"
|
|
|
|
/* Base address of DAVINCI usb0 wrapper */
|
|
#define DAVINCI_USB0_BASE 0x01C64000
|
|
|
|
/* Base address of DAVINCI musb core */
|
|
#define MENTOR_USB0_BASE (DAVINCI_USB0_BASE+0x400)
|
|
|
|
/*
|
|
* Davinci platform USB wrapper register overlay. Note: Only the required
|
|
* registers are included in this structure. It can be expanded as required.
|
|
*/
|
|
struct davinci_usb_regs {
|
|
u32 version;
|
|
u32 ctrlr;
|
|
u32 reserved[0x20];
|
|
u32 intclrr;
|
|
u32 intmskr;
|
|
u32 intmsksetr;
|
|
};
|
|
|
|
#define DAVINCI_USB_TX_ENDPTS_MASK 0x1f /* ep0 + 4 tx */
|
|
#define DAVINCI_USB_RX_ENDPTS_MASK 0x1e /* 4 rx */
|
|
#define DAVINCI_USB_USBINT_SHIFT 16
|
|
#define DAVINCI_USB_TXINT_SHIFT 0
|
|
#define DAVINCI_USB_RXINT_SHIFT 8
|
|
#define DAVINCI_INTR_DRVVBUS 0x0100
|
|
|
|
#define DAVINCI_USB_USBINT_MASK 0x01ff0000 /* 8 Mentor, DRVVBUS */
|
|
#define DAVINCI_USB_TXINT_MASK \
|
|
(DAVINCI_USB_TX_ENDPTS_MASK << DAVINCI_USB_TXINT_SHIFT)
|
|
#define DAVINCI_USB_RXINT_MASK \
|
|
(DAVINCI_USB_RX_ENDPTS_MASK << DAVINCI_USB_RXINT_SHIFT)
|
|
#define MGC_BUSCTL_OFFSET(_bEnd, _bOffset) \
|
|
(0x80 + (8*(_bEnd)) + (_bOffset))
|
|
|
|
/* Integrated highspeed/otg PHY */
|
|
#define USBPHY_CTL_PADDR (DAVINCI_SYSTEM_MODULE_BASE + 0x34)
|
|
#define USBPHY_PHY24MHZ (1 << 13)
|
|
#define USBPHY_PHYCLKGD (1 << 8)
|
|
#define USBPHY_SESNDEN (1 << 7) /* v(sess_end) comparator */
|
|
#define USBPHY_VBDTCTEN (1 << 6) /* v(bus) comparator */
|
|
#define USBPHY_PHYPLLON (1 << 4) /* override pll suspend */
|
|
#define USBPHY_CLKO1SEL (1 << 3)
|
|
#define USBPHY_OSCPDWN (1 << 2)
|
|
#define USBPHY_PHYPDWN (1 << 0)
|
|
|
|
/* Timeout for Davinci USB module */
|
|
#define DAVINCI_USB_TIMEOUT 0x3FFFFFF
|
|
|
|
/* IO Expander I2C address and VBUS enable mask */
|
|
#define IOEXP_I2C_ADDR 0x3A
|
|
#define IOEXP_VBUSEN_MASK 1
|
|
|
|
/* extern functions */
|
|
extern void lpsc_on(unsigned int id);
|
|
extern int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len);
|
|
extern int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len);
|
|
extern void enable_vbus(void);
|
|
#endif /* __DAVINCI_USB_H__ */
|
|
|