upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
535 lines
12 KiB
535 lines
12 KiB
/*
|
|
* Copyright (C) 2017 Marek Behun <marek.behun@nic.cz>
|
|
* Copyright (C) 2016 Tomas Hlavacek <tomas.hlavacek@nic.cz>
|
|
*
|
|
* Derived from the code for
|
|
* Marvell/db-88f6820-gp by Stefan Roese <sr@denx.de>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <i2c.h>
|
|
#include <miiphy.h>
|
|
#include <netdev.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/cpu.h>
|
|
#include <asm/arch/soc.h>
|
|
#include <dm/uclass.h>
|
|
#include <fdt_support.h>
|
|
#include <time.h>
|
|
|
|
#ifdef CONFIG_ATSHA204A
|
|
# include <atsha204a-i2c.h>
|
|
#endif
|
|
|
|
#ifdef CONFIG_WDT_ORION
|
|
# include <wdt.h>
|
|
#endif
|
|
|
|
#include "../drivers/ddr/marvell/a38x/ddr3_a38x_topology.h"
|
|
#include <../serdes/a38x/high_speed_env_spec.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define OMNIA_I2C_EEPROM_DM_NAME "i2c@0"
|
|
#define OMNIA_I2C_EEPROM 0x54
|
|
#define OMNIA_I2C_EEPROM_CONFIG_ADDR 0x0
|
|
#define OMNIA_I2C_EEPROM_ADDRLEN 2
|
|
#define OMNIA_I2C_EEPROM_MAGIC 0x0341a034
|
|
|
|
#define OMNIA_I2C_MCU_DM_NAME "i2c@0"
|
|
#define OMNIA_I2C_MCU_ADDR_STATUS 0x1
|
|
#define OMNIA_I2C_MCU_SATA 0x20
|
|
#define OMNIA_I2C_MCU_CARDDET 0x10
|
|
#define OMNIA_I2C_MCU 0x2a
|
|
#define OMNIA_I2C_MCU_WDT_ADDR 0x0b
|
|
|
|
#define OMNIA_ATSHA204_OTP_VERSION 0
|
|
#define OMNIA_ATSHA204_OTP_SERIAL 1
|
|
#define OMNIA_ATSHA204_OTP_MAC0 3
|
|
#define OMNIA_ATSHA204_OTP_MAC1 4
|
|
|
|
#define MVTWSI_ARMADA_DEBUG_REG 0x8c
|
|
|
|
/*
|
|
* Those values and defines are taken from the Marvell U-Boot version
|
|
* "u-boot-2013.01-2014_T3.0"
|
|
*/
|
|
#define OMNIA_GPP_OUT_ENA_LOW \
|
|
(~(BIT(1) | BIT(4) | BIT(6) | BIT(7) | BIT(8) | BIT(9) | \
|
|
BIT(10) | BIT(11) | BIT(19) | BIT(22) | BIT(23) | BIT(25) | \
|
|
BIT(26) | BIT(27) | BIT(29) | BIT(30) | BIT(31)))
|
|
#define OMNIA_GPP_OUT_ENA_MID \
|
|
(~(BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) | BIT(15) | \
|
|
BIT(16) | BIT(17) | BIT(18)))
|
|
|
|
#define OMNIA_GPP_OUT_VAL_LOW 0x0
|
|
#define OMNIA_GPP_OUT_VAL_MID 0x0
|
|
#define OMNIA_GPP_POL_LOW 0x0
|
|
#define OMNIA_GPP_POL_MID 0x0
|
|
|
|
static struct serdes_map board_serdes_map_pex[] = {
|
|
{PEX0, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0},
|
|
{USB3_HOST0, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0},
|
|
{PEX1, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0},
|
|
{USB3_HOST1, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0},
|
|
{PEX2, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0},
|
|
{SGMII2, SERDES_SPEED_1_25_GBPS, SERDES_DEFAULT_MODE, 0, 0}
|
|
};
|
|
|
|
static struct serdes_map board_serdes_map_sata[] = {
|
|
{SATA0, SERDES_SPEED_6_GBPS, SERDES_DEFAULT_MODE, 0, 0},
|
|
{USB3_HOST0, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0},
|
|
{PEX1, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0},
|
|
{USB3_HOST1, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0},
|
|
{PEX2, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0},
|
|
{SGMII2, SERDES_SPEED_1_25_GBPS, SERDES_DEFAULT_MODE, 0, 0}
|
|
};
|
|
|
|
static bool omnia_detect_sata(void)
|
|
{
|
|
struct udevice *bus, *dev;
|
|
int ret, retry = 3;
|
|
u16 mode;
|
|
|
|
puts("SERDES0 card detect: ");
|
|
|
|
if (uclass_get_device_by_name(UCLASS_I2C, OMNIA_I2C_MCU_DM_NAME, &bus)) {
|
|
puts("Cannot find MCU bus!\n");
|
|
return false;
|
|
}
|
|
|
|
ret = i2c_get_chip(bus, OMNIA_I2C_MCU, 1, &dev);
|
|
if (ret) {
|
|
puts("Cannot get MCU chip!\n");
|
|
return false;
|
|
}
|
|
|
|
for (; retry > 0; --retry) {
|
|
ret = dm_i2c_read(dev, OMNIA_I2C_MCU_ADDR_STATUS, (uchar *) &mode, 2);
|
|
if (!ret)
|
|
break;
|
|
}
|
|
|
|
if (!retry) {
|
|
puts("I2C read failed! Default PEX\n");
|
|
return false;
|
|
}
|
|
|
|
if (!(mode & OMNIA_I2C_MCU_CARDDET)) {
|
|
puts("NONE\n");
|
|
return false;
|
|
}
|
|
|
|
if (mode & OMNIA_I2C_MCU_SATA) {
|
|
puts("SATA\n");
|
|
return true;
|
|
} else {
|
|
puts("PEX\n");
|
|
return false;
|
|
}
|
|
}
|
|
|
|
int hws_board_topology_load(struct serdes_map **serdes_map_array, u8 *count)
|
|
{
|
|
if (omnia_detect_sata()) {
|
|
*serdes_map_array = board_serdes_map_sata;
|
|
*count = ARRAY_SIZE(board_serdes_map_sata);
|
|
} else {
|
|
*serdes_map_array = board_serdes_map_pex;
|
|
*count = ARRAY_SIZE(board_serdes_map_pex);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
struct omnia_eeprom {
|
|
u32 magic;
|
|
u32 ramsize;
|
|
char region[4];
|
|
u32 crc;
|
|
};
|
|
|
|
static bool omnia_read_eeprom(struct omnia_eeprom *oep)
|
|
{
|
|
struct udevice *bus, *dev;
|
|
int ret, crc, retry = 3;
|
|
|
|
if (uclass_get_device_by_name(UCLASS_I2C, OMNIA_I2C_EEPROM_DM_NAME, &bus)) {
|
|
puts("Cannot find EEPROM bus\n");
|
|
return false;
|
|
}
|
|
|
|
ret = i2c_get_chip(bus, OMNIA_I2C_EEPROM, OMNIA_I2C_EEPROM_ADDRLEN, &dev);
|
|
if (ret) {
|
|
puts("Cannot get EEPROM chip\n");
|
|
return false;
|
|
}
|
|
|
|
for (; retry > 0; --retry) {
|
|
ret = dm_i2c_read(dev, OMNIA_I2C_EEPROM_CONFIG_ADDR, (uchar *) oep, sizeof(struct omnia_eeprom));
|
|
if (ret)
|
|
continue;
|
|
|
|
if (oep->magic != OMNIA_I2C_EEPROM_MAGIC) {
|
|
puts("I2C EEPROM missing magic number!\n");
|
|
continue;
|
|
}
|
|
|
|
crc = crc32(0, (unsigned char *) oep,
|
|
sizeof(struct omnia_eeprom) - 4);
|
|
if (crc == oep->crc) {
|
|
break;
|
|
} else {
|
|
printf("CRC of EEPROM memory config failed! "
|
|
"calc=0x%04x saved=0x%04x\n", crc, oep->crc);
|
|
}
|
|
}
|
|
|
|
if (!retry) {
|
|
puts("I2C EEPROM read failed!\n");
|
|
return false;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
/*
|
|
* Define the DDR layout / topology here in the board file. This will
|
|
* be used by the DDR3 init code in the SPL U-Boot version to configure
|
|
* the DDR3 controller.
|
|
*/
|
|
static struct hws_topology_map board_topology_map_1g = {
|
|
0x1, /* active interfaces */
|
|
/* cs_mask, mirror, dqs_swap, ck_swap X PUPs */
|
|
{ { { {0x1, 0, 0, 0},
|
|
{0x1, 0, 0, 0},
|
|
{0x1, 0, 0, 0},
|
|
{0x1, 0, 0, 0},
|
|
{0x1, 0, 0, 0} },
|
|
SPEED_BIN_DDR_1600K, /* speed_bin */
|
|
BUS_WIDTH_16, /* memory_width */
|
|
MEM_4G, /* mem_size */
|
|
DDR_FREQ_800, /* frequency */
|
|
0, 0, /* cas_l cas_wl */
|
|
HWS_TEMP_NORMAL, /* temperature */
|
|
HWS_TIM_2T} }, /* timing (force 2t) */
|
|
5, /* Num Of Bus Per Interface*/
|
|
BUS_MASK_32BIT /* Busses mask */
|
|
};
|
|
|
|
static struct hws_topology_map board_topology_map_2g = {
|
|
0x1, /* active interfaces */
|
|
/* cs_mask, mirror, dqs_swap, ck_swap X PUPs */
|
|
{ { { {0x1, 0, 0, 0},
|
|
{0x1, 0, 0, 0},
|
|
{0x1, 0, 0, 0},
|
|
{0x1, 0, 0, 0},
|
|
{0x1, 0, 0, 0} },
|
|
SPEED_BIN_DDR_1600K, /* speed_bin */
|
|
BUS_WIDTH_16, /* memory_width */
|
|
MEM_8G, /* mem_size */
|
|
DDR_FREQ_800, /* frequency */
|
|
0, 0, /* cas_l cas_wl */
|
|
HWS_TEMP_NORMAL, /* temperature */
|
|
HWS_TIM_2T} }, /* timing (force 2t) */
|
|
5, /* Num Of Bus Per Interface*/
|
|
BUS_MASK_32BIT /* Busses mask */
|
|
};
|
|
|
|
struct hws_topology_map *ddr3_get_topology_map(void)
|
|
{
|
|
static int mem = 0;
|
|
struct omnia_eeprom oep;
|
|
|
|
/* Get the board config from EEPROM */
|
|
if (mem == 0) {
|
|
if(!omnia_read_eeprom(&oep))
|
|
goto out;
|
|
|
|
printf("Memory config in EEPROM: 0x%02x\n", oep.ramsize);
|
|
|
|
if (oep.ramsize == 0x2)
|
|
mem = 2;
|
|
else
|
|
mem = 1;
|
|
}
|
|
|
|
out:
|
|
/* Hardcoded fallback */
|
|
if (mem == 0) {
|
|
puts("WARNING: Memory config from EEPROM read failed.\n");
|
|
puts("Falling back to default 1GiB map.\n");
|
|
mem = 1;
|
|
}
|
|
|
|
/* Return the board topology as defined in the board code */
|
|
if (mem == 1)
|
|
return &board_topology_map_1g;
|
|
if (mem == 2)
|
|
return &board_topology_map_2g;
|
|
|
|
return &board_topology_map_1g;
|
|
}
|
|
|
|
#ifndef CONFIG_SPL_BUILD
|
|
static int set_regdomain(void)
|
|
{
|
|
struct omnia_eeprom oep;
|
|
char rd[3] = {' ', ' ', 0};
|
|
|
|
if (omnia_read_eeprom(&oep))
|
|
memcpy(rd, &oep.region, 2);
|
|
else
|
|
puts("EEPROM regdomain read failed.\n");
|
|
|
|
printf("Regdomain set to %s\n", rd);
|
|
return setenv("regdomain", rd);
|
|
}
|
|
#endif
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
u32 i2c_debug_reg;
|
|
|
|
/* Configure MPP */
|
|
writel(0x11111111, MVEBU_MPP_BASE + 0x00);
|
|
writel(0x11111111, MVEBU_MPP_BASE + 0x04);
|
|
writel(0x11244011, MVEBU_MPP_BASE + 0x08);
|
|
writel(0x22222111, MVEBU_MPP_BASE + 0x0c);
|
|
writel(0x22200002, MVEBU_MPP_BASE + 0x10);
|
|
writel(0x30042022, MVEBU_MPP_BASE + 0x14);
|
|
writel(0x55550555, MVEBU_MPP_BASE + 0x18);
|
|
writel(0x00005550, MVEBU_MPP_BASE + 0x1c);
|
|
|
|
/* Set GPP Out value */
|
|
writel(OMNIA_GPP_OUT_VAL_LOW, MVEBU_GPIO0_BASE + 0x00);
|
|
writel(OMNIA_GPP_OUT_VAL_MID, MVEBU_GPIO1_BASE + 0x00);
|
|
|
|
/* Set GPP Polarity */
|
|
writel(OMNIA_GPP_POL_LOW, MVEBU_GPIO0_BASE + 0x0c);
|
|
writel(OMNIA_GPP_POL_MID, MVEBU_GPIO1_BASE + 0x0c);
|
|
|
|
/* Set GPP Out Enable */
|
|
writel(OMNIA_GPP_OUT_ENA_LOW, MVEBU_GPIO0_BASE + 0x04);
|
|
writel(OMNIA_GPP_OUT_ENA_MID, MVEBU_GPIO1_BASE + 0x04);
|
|
|
|
/* Disable I2C debug mode blocking 0x64 I2C address */
|
|
i2c_debug_reg = readl(MVEBU_TWSI_BASE + MVTWSI_ARMADA_DEBUG_REG);
|
|
i2c_debug_reg &= ~(1<<18);
|
|
writel(i2c_debug_reg, MVEBU_TWSI_BASE + MVTWSI_ARMADA_DEBUG_REG);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifndef CONFIG_SPL_BUILD
|
|
static bool disable_mcu_watchdog(void)
|
|
{
|
|
struct udevice *bus, *dev;
|
|
int ret, retry = 3;
|
|
uchar buf[1] = {0x0};
|
|
|
|
if (uclass_get_device_by_name(UCLASS_I2C, OMNIA_I2C_MCU_DM_NAME, &bus)) {
|
|
puts("Cannot find MCU bus! Can not disable MCU WDT.\n");
|
|
return false;
|
|
}
|
|
|
|
ret = i2c_get_chip(bus, OMNIA_I2C_MCU, 1, &dev);
|
|
if (ret) {
|
|
puts("Cannot get MCU chip! Can not disable MCU WDT.\n");
|
|
return false;
|
|
}
|
|
|
|
for (; retry > 0; --retry)
|
|
if (!dm_i2c_write(dev, OMNIA_I2C_MCU_WDT_ADDR, (uchar *) buf, 1))
|
|
break;
|
|
|
|
if (retry <= 0) {
|
|
puts("I2C MCU watchdog failed to disable!\n");
|
|
return false;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
#endif
|
|
|
|
#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_WDT_ORION)
|
|
static struct udevice *watchdog_dev = NULL;
|
|
#endif
|
|
|
|
int board_init(void)
|
|
{
|
|
/* adress of boot parameters */
|
|
gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
|
|
|
|
#ifndef CONFIG_SPL_BUILD
|
|
# ifdef CONFIG_WDT_ORION
|
|
if (uclass_get_device(UCLASS_WDT, 0, &watchdog_dev)) {
|
|
puts("Cannot find Armada 385 watchdog!\n");
|
|
} else {
|
|
puts("Enabling Armada 385 watchdog.\n");
|
|
wdt_start(watchdog_dev, (u32) 25000000 * 120, 0);
|
|
}
|
|
# endif
|
|
|
|
if (disable_mcu_watchdog())
|
|
puts("Disabled MCU startup watchdog.\n");
|
|
|
|
set_regdomain();
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_WATCHDOG
|
|
/* Called by macro WATCHDOG_RESET */
|
|
void watchdog_reset(void)
|
|
{
|
|
# if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_WDT_ORION)
|
|
static ulong next_reset = 0;
|
|
ulong now;
|
|
|
|
if (!watchdog_dev)
|
|
return;
|
|
|
|
now = timer_get_us();
|
|
|
|
/* Do not reset the watchdog too often */
|
|
if (now > next_reset) {
|
|
wdt_reset(watchdog_dev);
|
|
next_reset = now + 1000;
|
|
}
|
|
# endif
|
|
}
|
|
#endif
|
|
|
|
int board_late_init(void)
|
|
{
|
|
#ifndef CONFIG_SPL_BUILD
|
|
set_regdomain();
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_ATSHA204A
|
|
static struct udevice *get_atsha204a_dev(void)
|
|
{
|
|
static struct udevice *dev = NULL;
|
|
|
|
if (dev != NULL)
|
|
return dev;
|
|
|
|
if (uclass_get_device_by_name(UCLASS_MISC, "atsha204a@64", &dev)) {
|
|
puts("Cannot find ATSHA204A on I2C bus!\n");
|
|
dev = NULL;
|
|
}
|
|
|
|
return dev;
|
|
}
|
|
#endif
|
|
|
|
int checkboard(void)
|
|
{
|
|
u32 version_num, serial_num;
|
|
int err = 1;
|
|
|
|
#ifdef CONFIG_ATSHA204A
|
|
struct udevice *dev = get_atsha204a_dev();
|
|
|
|
if (dev) {
|
|
err = atsha204a_wakeup(dev);
|
|
if (err)
|
|
goto out;
|
|
|
|
err = atsha204a_read(dev, ATSHA204A_ZONE_OTP, false,
|
|
OMNIA_ATSHA204_OTP_VERSION,
|
|
(u8 *) &version_num);
|
|
if (err)
|
|
goto out;
|
|
|
|
err = atsha204a_read(dev, ATSHA204A_ZONE_OTP, false,
|
|
OMNIA_ATSHA204_OTP_SERIAL,
|
|
(u8 *) &serial_num);
|
|
if (err)
|
|
goto out;
|
|
|
|
atsha204a_sleep(dev);
|
|
}
|
|
|
|
out:
|
|
#endif
|
|
|
|
if (err)
|
|
printf("Board: Turris Omnia (ver N/A). SN: N/A\n");
|
|
else
|
|
printf("Board: Turris Omnia SNL %08X%08X\n",
|
|
be32_to_cpu(version_num), be32_to_cpu(serial_num));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void increment_mac(u8 *mac)
|
|
{
|
|
int i;
|
|
|
|
for (i = 5; i >= 3; i--) {
|
|
mac[i] += 1;
|
|
if (mac[i])
|
|
break;
|
|
}
|
|
}
|
|
|
|
int misc_init_r(void)
|
|
{
|
|
#ifdef CONFIG_ATSHA204A
|
|
int err;
|
|
struct udevice *dev = get_atsha204a_dev();
|
|
u8 mac0[4], mac1[4], mac[6];
|
|
|
|
if (!dev)
|
|
goto out;
|
|
|
|
err = atsha204a_wakeup(dev);
|
|
if (err)
|
|
goto out;
|
|
|
|
err = atsha204a_read(dev, ATSHA204A_ZONE_OTP, false,
|
|
OMNIA_ATSHA204_OTP_MAC0, mac0);
|
|
if (err)
|
|
goto out;
|
|
|
|
err = atsha204a_read(dev, ATSHA204A_ZONE_OTP, false,
|
|
OMNIA_ATSHA204_OTP_MAC1, mac1);
|
|
if (err)
|
|
goto out;
|
|
|
|
atsha204a_sleep(dev);
|
|
|
|
mac[0] = mac0[1];
|
|
mac[1] = mac0[2];
|
|
mac[2] = mac0[3];
|
|
mac[3] = mac1[1];
|
|
mac[4] = mac1[2];
|
|
mac[5] = mac1[3];
|
|
|
|
if (is_valid_ethaddr(mac))
|
|
eth_setenv_enetaddr("ethaddr", mac);
|
|
|
|
increment_mac(mac);
|
|
|
|
if (is_valid_ethaddr(mac))
|
|
eth_setenv_enetaddr("eth1addr", mac);
|
|
|
|
increment_mac(mac);
|
|
|
|
if (is_valid_ethaddr(mac))
|
|
eth_setenv_enetaddr("eth2addr", mac);
|
|
|
|
out:
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
|