upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
147 lines
3.0 KiB
147 lines
3.0 KiB
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* (c) 2015 Purna Chandra Mandal <purna.mandal@microchip.com>
|
|
*
|
|
*/
|
|
|
|
#ifndef __MICROCHIP_DDR2_REGS_H
|
|
#define __MICROCHIP_DDR2_REGS_H
|
|
|
|
#include <linux/bitops.h>
|
|
|
|
/* DDR2 Controller */
|
|
struct ddr2_ctrl_regs {
|
|
u32 tsel;
|
|
u32 minlim;
|
|
u32 reqprd;
|
|
u32 mincmd;
|
|
u32 memcon;
|
|
u32 memcfg0;
|
|
u32 memcfg1;
|
|
u32 memcfg2;
|
|
u32 memcfg3;
|
|
u32 memcfg4;
|
|
u32 refcfg;
|
|
u32 pwrcfg;
|
|
u32 dlycfg0;
|
|
u32 dlycfg1;
|
|
u32 dlycfg2;
|
|
u32 dlycfg3;
|
|
u32 odtcfg;
|
|
u32 xfercfg;
|
|
u32 cmdissue;
|
|
u32 odtencfg;
|
|
u32 memwidth;
|
|
u32 unused[11];
|
|
u32 cmd10[16];
|
|
u32 cmd20[16];
|
|
};
|
|
|
|
/* Arbiter Config */
|
|
#define MIN_LIM_WIDTH 5
|
|
#define RQST_PERIOD_WIDTH 8
|
|
#define MIN_CMDACPT_WIDTH 8
|
|
|
|
/* Refresh Config */
|
|
#define REFCNT_CLK(x) (x)
|
|
#define REFDLY_CLK(x) ((x) << 16)
|
|
#define MAX_PEND_REF(x) ((x) << 24)
|
|
|
|
/* Power Config */
|
|
#define PRECH_PWR_DN_ONLY(x) ((x) << 22)
|
|
#define SELF_REF_DLY(x) ((x) << 12)
|
|
#define PWR_DN_DLY(x) ((x) << 4)
|
|
#define EN_AUTO_SELF_REF(x) ((x) << 3)
|
|
#define EN_AUTO_PWR_DN(x) ((x) << 2)
|
|
#define ERR_CORR_EN(x) ((x) << 1)
|
|
#define ECC_EN(x) (x)
|
|
|
|
/* Memory Width */
|
|
#define HALF_RATE_MODE BIT(3)
|
|
|
|
/* Delay Config */
|
|
#define ODTWLEN(x) ((x) << 20)
|
|
#define ODTRLEN(x) ((x) << 16)
|
|
#define ODTWDLY(x) ((x) << 12)
|
|
#define ODTRDLY(x) ((x) << 8)
|
|
|
|
/* Xfer Config */
|
|
#define BIG_ENDIAN(x) ((x) << 31)
|
|
#define MAX_BURST(x) ((x) << 24)
|
|
#define RDATENDLY(x) ((x) << 16)
|
|
#define NXDATAVDLY(x) ((x) << 4)
|
|
#define NXTDATRQDLY(x) ((x) << 0)
|
|
|
|
/* Host Commands */
|
|
#define IDLE_NOP 0x00ffffff
|
|
#define PRECH_ALL_CMD 0x00fff401
|
|
#define REF_CMD 0x00fff801
|
|
#define LOAD_MODE_CMD 0x00fff001
|
|
#define CKE_LOW 0x00ffeffe
|
|
|
|
#define NUM_HOST_CMDS 12
|
|
|
|
/* Host CMD Issue */
|
|
#define CMD_VALID BIT(4)
|
|
#define NUMHOSTCMD(x) (x)
|
|
|
|
/* Memory Control */
|
|
#define INIT_DONE BIT(1)
|
|
#define INIT_START BIT(0)
|
|
|
|
/* Address Control */
|
|
#define EN_AUTO_PRECH 0
|
|
#define SB_PRI 1
|
|
|
|
/* DDR2 Phy Register */
|
|
struct ddr2_phy_regs {
|
|
u32 scl_start;
|
|
u32 unused1[2];
|
|
u32 scl_latency;
|
|
u32 unused2[2];
|
|
u32 scl_config_1;
|
|
u32 scl_config_2;
|
|
u32 pad_ctrl;
|
|
u32 dll_recalib;
|
|
};
|
|
|
|
/* PHY PAD CONTROL */
|
|
#define ODT_SEL BIT(0)
|
|
#define ODT_EN BIT(1)
|
|
#define DRIVE_SEL(x) ((x) << 2)
|
|
#define ODT_PULLDOWN(x) ((x) << 4)
|
|
#define ODT_PULLUP(x) ((x) << 6)
|
|
#define EXTRA_OEN_CLK(x) ((x) << 8)
|
|
#define NOEXT_DLL BIT(9)
|
|
#define DLR_DFT_WRCMD BIT(13)
|
|
#define HALF_RATE BIT(14)
|
|
#define DRVSTR_PFET(x) ((x) << 16)
|
|
#define DRVSTR_NFET(x) ((x) << 20)
|
|
#define RCVR_EN BIT(28)
|
|
#define PREAMBLE_DLY(x) ((x) << 29)
|
|
|
|
/* PHY DLL RECALIBRATE */
|
|
#define RECALIB_CNT(x) ((x) << 8)
|
|
#define DISABLE_RECALIB(x) ((x) << 26)
|
|
#define DELAY_START_VAL(x) ((x) << 28)
|
|
|
|
/* PHY SCL CONFIG1 */
|
|
#define SCL_BURST8 BIT(0)
|
|
#define SCL_DDR_CONNECTED BIT(1)
|
|
#define SCL_RCAS_LAT(x) ((x) << 4)
|
|
#define SCL_ODTCSWW BIT(24)
|
|
|
|
/* PHY SCL CONFIG2 */
|
|
#define SCL_CSEN BIT(0)
|
|
#define SCL_WCAS_LAT(x) ((x) << 8)
|
|
|
|
/* PHY SCL Latency */
|
|
#define SCL_CAPCLKDLY(x) ((x) << 0)
|
|
#define SCL_DDRCLKDLY(x) ((x) << 4)
|
|
|
|
/* PHY SCL START */
|
|
#define SCL_START BIT(28)
|
|
#define SCL_EN BIT(26)
|
|
#define SCL_LUBPASS (BIT(1) | BIT(0))
|
|
|
|
#endif /* __MICROCHIP_DDR2_REGS_H */
|
|
|