upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
316 lines
6.5 KiB
316 lines
6.5 KiB
/*
|
|
* U-boot - start.S Startup file of u-boot for BF533/BF561
|
|
*
|
|
* Copyright (c) 2005-2007 Analog Devices Inc.
|
|
*
|
|
* This file is based on head.S
|
|
* Copyright (c) 2003 Metrowerks/Motorola
|
|
* Copyright (C) 1998 D. Jeff Dionne <jeff@ryeham.ee.ryerson.ca>,
|
|
* Kenneth Albanowski <kjahds@kjahds.com>,
|
|
* The Silver Hammer Group, Ltd.
|
|
* (c) 1995, Dionne & Associates
|
|
* (c) 1995, DKG Display Tech.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
|
|
* MA 02110-1301 USA
|
|
*/
|
|
|
|
/*
|
|
* Note: A change in this file subsequently requires a change in
|
|
* board/$(board_name)/config.mk for a valid u-boot.bin
|
|
*/
|
|
|
|
#define ASSEMBLY
|
|
|
|
#include <linux/config.h>
|
|
#include <config.h>
|
|
#include <asm/blackfin.h>
|
|
|
|
.global _stext;
|
|
.global __bss_start;
|
|
.global start;
|
|
.global _start;
|
|
.global _rambase;
|
|
.global _ramstart;
|
|
.global _ramend;
|
|
.global _bf533_data_dest;
|
|
.global _bf533_data_size;
|
|
.global edata;
|
|
.global _initialize;
|
|
.global _exit;
|
|
.global flashdataend;
|
|
.global init_sdram;
|
|
|
|
#if (CONFIG_CCLK_DIV == 1)
|
|
#define CONFIG_CCLK_ACT_DIV CCLK_DIV1
|
|
#endif
|
|
#if (CONFIG_CCLK_DIV == 2)
|
|
#define CONFIG_CCLK_ACT_DIV CCLK_DIV2
|
|
#endif
|
|
#if (CONFIG_CCLK_DIV == 4)
|
|
#define CONFIG_CCLK_ACT_DIV CCLK_DIV4
|
|
#endif
|
|
#if (CONFIG_CCLK_DIV == 8)
|
|
#define CONFIG_CCLK_ACT_DIV CCLK_DIV8
|
|
#endif
|
|
#ifndef CONFIG_CCLK_ACT_DIV
|
|
#define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly
|
|
#endif
|
|
|
|
.text
|
|
_start:
|
|
start:
|
|
_stext:
|
|
|
|
R0 = 0x32;
|
|
SYSCFG = R0;
|
|
SSYNC;
|
|
|
|
/* As per HW reference manual DAG registers,
|
|
* DATA and Address resgister shall be zero'd
|
|
* in initialization, after a reset state
|
|
*/
|
|
r1 = 0; /* Data registers zero'd */
|
|
r2 = 0;
|
|
r3 = 0;
|
|
r4 = 0;
|
|
r5 = 0;
|
|
r6 = 0;
|
|
r7 = 0;
|
|
|
|
p0 = 0; /* Address registers zero'd */
|
|
p1 = 0;
|
|
p2 = 0;
|
|
p3 = 0;
|
|
p4 = 0;
|
|
p5 = 0;
|
|
|
|
i0 = 0; /* DAG Registers zero'd */
|
|
i1 = 0;
|
|
i2 = 0;
|
|
i3 = 0;
|
|
m0 = 0;
|
|
m1 = 0;
|
|
m3 = 0;
|
|
m3 = 0;
|
|
l0 = 0;
|
|
l1 = 0;
|
|
l2 = 0;
|
|
l3 = 0;
|
|
b0 = 0;
|
|
b1 = 0;
|
|
b2 = 0;
|
|
b3 = 0;
|
|
|
|
/* Set loop counters to zero, to make sure that
|
|
* hw loops are disabled.
|
|
*/
|
|
r0 = 0;
|
|
lc0 = r0;
|
|
lc1 = r0;
|
|
|
|
SSYNC;
|
|
|
|
/* Check soft reset status */
|
|
p0.h = SWRST >> 16;
|
|
p0.l = SWRST & 0xFFFF;
|
|
r0.l = w[p0];
|
|
|
|
cc = bittst(r0, 15);
|
|
if !cc jump no_soft_reset;
|
|
|
|
/* Clear Soft reset */
|
|
r0 = 0x0000;
|
|
w[p0] = r0;
|
|
ssync;
|
|
|
|
no_soft_reset:
|
|
nop;
|
|
|
|
/* Clear EVT registers */
|
|
p0.h = (EVT_EMULATION_ADDR >> 16);
|
|
p0.l = (EVT_EMULATION_ADDR & 0xFFFF);
|
|
p0 += 8;
|
|
p1 = 14;
|
|
r1 = 0;
|
|
LSETUP(4,4) lc0 = p1;
|
|
[ p0 ++ ] = r1;
|
|
|
|
p0.h = hi(SIC_IWR);
|
|
p0.l = lo(SIC_IWR);
|
|
r0.l = 0x1;
|
|
w[p0] = r0.l;
|
|
SSYNC;
|
|
|
|
sp.l = (0xffb01000 & 0xFFFF);
|
|
sp.h = (0xffb01000 >> 16);
|
|
|
|
call init_sdram;
|
|
|
|
/* relocate into to RAM */
|
|
call get_pc;
|
|
offset:
|
|
r2.l = offset;
|
|
r2.h = offset;
|
|
r3.l = start;
|
|
r3.h = start;
|
|
r1 = r2 - r3;
|
|
|
|
r0 = r0 - r1;
|
|
p1 = r0;
|
|
|
|
p2.l = (CFG_MONITOR_BASE & 0xffff);
|
|
p2.h = (CFG_MONITOR_BASE >> 16);
|
|
|
|
p3 = 0x04;
|
|
p4.l = ((CFG_MONITOR_BASE + CFG_MONITOR_LEN) & 0xffff);
|
|
p4.h = ((CFG_MONITOR_BASE + CFG_MONITOR_LEN) >> 16);
|
|
loop1:
|
|
r1 = [p1 ++ p3];
|
|
[p2 ++ p3] = r1;
|
|
cc=p2==p4;
|
|
if !cc jump loop1;
|
|
/*
|
|
* configure STACK
|
|
*/
|
|
r0.h = (CONFIG_STACKBASE >> 16);
|
|
r0.l = (CONFIG_STACKBASE & 0xFFFF);
|
|
sp = r0;
|
|
fp = sp;
|
|
|
|
/*
|
|
* This next section keeps the processor in supervisor mode
|
|
* during kernel boot. Switches to user mode at end of boot.
|
|
* See page 3-9 of Hardware Reference manual for documentation.
|
|
*/
|
|
|
|
/* To keep ourselves in the supervisor mode */
|
|
p0.l = (EVT_IVG15_ADDR & 0xFFFF);
|
|
p0.h = (EVT_IVG15_ADDR >> 16);
|
|
|
|
p1.l = _real_start;
|
|
p1.h = _real_start;
|
|
[p0] = p1;
|
|
|
|
p0.l = (IMASK & 0xFFFF);
|
|
p0.h = (IMASK >> 16);
|
|
r0.l = LO(IVG15_POS);
|
|
r0.h = HI(IVG15_POS);
|
|
[p0] = r0;
|
|
raise 15;
|
|
p0.l = WAIT_HERE;
|
|
p0.h = WAIT_HERE;
|
|
reti = p0;
|
|
rti;
|
|
|
|
WAIT_HERE:
|
|
jump WAIT_HERE;
|
|
|
|
.global _real_start;
|
|
_real_start:
|
|
[ -- sp ] = reti;
|
|
|
|
/* DMA reset code to Hi of L1 SRAM */
|
|
copy:
|
|
/* P1 Points to the beginning of SYSTEM MMR Space */
|
|
P1.H = hi(SYSMMR_BASE);
|
|
P1.L = lo(SYSMMR_BASE);
|
|
|
|
R0.H = reset_start; /* Source Address (high) */
|
|
R0.L = reset_start; /* Source Address (low) */
|
|
R1.H = reset_end;
|
|
R1.L = reset_end;
|
|
R2 = R1 - R0; /* Count */
|
|
R1.H = hi(L1_ISRAM); /* Destination Address (high) */
|
|
R1.L = lo(L1_ISRAM); /* Destination Address (low) */
|
|
R3.L = DMAEN; /* Source DMAConfig Value (8-bit words) */
|
|
/* Destination DMAConfig Value (8-bit words) */
|
|
R4.L = (DI_EN | WNR | DMAEN);
|
|
|
|
DMA:
|
|
R6 = 0x1 (Z);
|
|
W[P1+OFFSET_(MDMA_S0_X_MODIFY)] = R6; /* Source Modify = 1 */
|
|
W[P1+OFFSET_(MDMA_D0_X_MODIFY)] = R6; /* Destination Modify = 1 */
|
|
|
|
[P1+OFFSET_(MDMA_S0_START_ADDR)] = R0; /* Set Source Base Address */
|
|
W[P1+OFFSET_(MDMA_S0_X_COUNT)] = R2; /* Set Source Count */
|
|
/* Set Source DMAConfig = DMA Enable,
|
|
Memory Read, 8-Bit Transfers, 1-D DMA, Flow - Stop */
|
|
W[P1+OFFSET_(MDMA_S0_CONFIG)] = R3;
|
|
|
|
/* Set Destination Base Address */
|
|
[P1+OFFSET_(MDMA_D0_START_ADDR)] = R1;
|
|
W[P1+OFFSET_(MDMA_D0_X_COUNT)] = R2; /* Set Destination Count */
|
|
/* Set Destination DMAConfig = DMA Enable,
|
|
Memory Write, 8-Bit Transfers, 1-D DMA, Flow - Stop, IOC */
|
|
W[P1+OFFSET_(MDMA_D0_CONFIG)] = R4;
|
|
|
|
WAIT_DMA_DONE:
|
|
p0.h = hi(MDMA_D0_IRQ_STATUS);
|
|
p0.l = lo(MDMA_D0_IRQ_STATUS);
|
|
R0 = W[P0](Z);
|
|
CC = BITTST(R0, 0);
|
|
if ! CC jump WAIT_DMA_DONE
|
|
|
|
R0 = 0x1;
|
|
|
|
/* Write 1 to clear DMA interrupt */
|
|
W[P1+OFFSET_(MDMA_D0_IRQ_STATUS)] = R0;
|
|
|
|
/* Initialize BSS Section with 0 s */
|
|
p1.l = __bss_start;
|
|
p1.h = __bss_start;
|
|
p2.l = _end;
|
|
p2.h = _end;
|
|
r1 = p1;
|
|
r2 = p2;
|
|
r3 = r2 - r1;
|
|
r3 = r3 >> 2;
|
|
p3 = r3;
|
|
lsetup (_clear_bss, _clear_bss_end ) lc1 = p3;
|
|
CC = p2<=p1;
|
|
if CC jump _clear_bss_skip;
|
|
r0 = 0;
|
|
_clear_bss:
|
|
_clear_bss_end:
|
|
[p1++] = r0;
|
|
_clear_bss_skip:
|
|
|
|
p0.l = _start1;
|
|
p0.h = _start1;
|
|
jump (p0);
|
|
|
|
reset_start:
|
|
p0.h = WDOG_CNT >> 16;
|
|
p0.l = WDOG_CNT & 0xffff;
|
|
r0 = 0x0010;
|
|
w[p0] = r0;
|
|
p0.h = WDOG_CTL >> 16;
|
|
p0.l = WDOG_CTL & 0xffff;
|
|
r0 = 0x0000;
|
|
w[p0] = r0;
|
|
reset_wait:
|
|
jump reset_wait;
|
|
|
|
reset_end: nop;
|
|
|
|
_exit:
|
|
jump.s _exit;
|
|
get_pc:
|
|
r0 = rets;
|
|
rts;
|
|
|