upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/board/utx8245/utx8245.c

135 lines
3.7 KiB

/*
* (C) Copyright 2001
* Rob Taylor, Flying Pig Systems. robt@flyingpig.com.
*
* (C) Copyright 2002
* Gregory E. Allen, gallen@arlut.utexas.edu
* Matthew E. Karger, karger@arlut.utexas.edu
* Applied Research Laboratories, The University of Texas at Austin
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <mpc824x.h>
#include <asm/processor.h>
#include <asm/io.h>
#include <asm/mmu.h>
#include <pci.h>
#include <netdev.h>
#define SAVE_SZ 32
int checkboard(void)
{
ulong busfreq = get_bus_freq(0);
char buf[32];
printf("Board: UTX8245 Local Bus at %s MHz\n", strmhz(buf, busfreq));
return 0;
}
phys_size_t initdram(int board_type)
{
long size;
long new_bank0_end;
long new_bank1_end;
long mear1;
long emear1;
size = get_ram_size(CFG_SDRAM_BASE, CFG_MAX_RAM_SIZE);
new_bank0_end = size/2 - 1;
new_bank1_end = size - 1;
mear1 = mpc824x_mpc107_getreg(MEAR1);
emear1 = mpc824x_mpc107_getreg(EMEAR1);
mear1 = (mear1 & 0xFFFF0000) |
((new_bank0_end & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) |
((new_bank1_end & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT << 8);
emear1 = (emear1 & 0xFFFF0000) |
((new_bank0_end & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) |
((new_bank1_end & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT << 8);
mpc824x_mpc107_setreg(MEAR1, mear1);
mpc824x_mpc107_setreg(EMEAR1, emear1);
return (size);
}
/*
* Initialize PCI Devices, report devices found.
*/
static struct pci_config_table pci_utx8245_config_table[] = {
#ifndef CONFIG_PCI_PNP
{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x0C, PCI_ANY_ID,
pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
PCI_ENET0_MEMADDR,
PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }},
{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x0B, PCI_ANY_ID,
pci_cfgfunc_config_device, { PCI_FIREWIRE_IOADDR,
PCI_FIREWIRE_MEMADDR,
PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }},
#endif /*CONFIG_PCI_PNP*/
{ }
};
static void pci_utx8245_fixup_irq(struct pci_controller *hose, pci_dev_t dev)
{
if (PCI_DEV(dev) == 11)
/* assign serial interrupt line 9 (int25) to FireWire */
pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, 25);
else if (PCI_DEV(dev) == 12)
/* assign serial interrupt line 8 (int24) to Ethernet */
pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, 24);
else if (PCI_DEV(dev) == 14)
/* assign serial interrupt line 0 (int16) to PMC slot 0 */
pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, 16);
else if (PCI_DEV(dev) == 15)
/* assign serial interrupt line 1 (int17) to PMC slot 1 */
pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, 17);
}
static struct pci_controller utx8245_hose = {
#ifndef CONFIG_PCI_PNP
config_table: pci_utx8245_config_table,
fixup_irq: pci_utx8245_fixup_irq,
write_byte: pci_hose_write_config_byte
#endif /*CONFIG_PCI_PNP*/
};
void pci_init_board (void)
{
pci_mpc824x_init(&utx8245_hose);
icache_enable();
}
int board_eth_init(bd_t *bis)
{
return pci_eth_init(bis);
}