upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
426 lines
9.8 KiB
426 lines
9.8 KiB
/*
|
|
* Copyright 2007-2010 Freescale Semiconductor, Inc.
|
|
*
|
|
* (C) Copyright 2003 Motorola Inc.
|
|
* Modified by Xianghua Xiao, X.Xiao@motorola.com
|
|
*
|
|
* (C) Copyright 2000
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <watchdog.h>
|
|
#include <asm/processor.h>
|
|
#include <ioports.h>
|
|
#include <sata.h>
|
|
#include <asm/io.h>
|
|
#include <asm/cache.h>
|
|
#include <asm/mmu.h>
|
|
#include <asm/fsl_law.h>
|
|
#include <asm/fsl_serdes.h>
|
|
#include "mp.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#ifdef CONFIG_QE
|
|
extern qe_iop_conf_t qe_iop_conf_tab[];
|
|
extern void qe_config_iopin(u8 port, u8 pin, int dir,
|
|
int open_drain, int assign);
|
|
extern void qe_init(uint qe_base);
|
|
extern void qe_reset(void);
|
|
|
|
static void config_qe_ioports(void)
|
|
{
|
|
u8 port, pin;
|
|
int dir, open_drain, assign;
|
|
int i;
|
|
|
|
for (i = 0; qe_iop_conf_tab[i].assign != QE_IOP_TAB_END; i++) {
|
|
port = qe_iop_conf_tab[i].port;
|
|
pin = qe_iop_conf_tab[i].pin;
|
|
dir = qe_iop_conf_tab[i].dir;
|
|
open_drain = qe_iop_conf_tab[i].open_drain;
|
|
assign = qe_iop_conf_tab[i].assign;
|
|
qe_config_iopin(port, pin, dir, open_drain, assign);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_CPM2
|
|
void config_8560_ioports (volatile ccsr_cpm_t * cpm)
|
|
{
|
|
int portnum;
|
|
|
|
for (portnum = 0; portnum < 4; portnum++) {
|
|
uint pmsk = 0,
|
|
ppar = 0,
|
|
psor = 0,
|
|
pdir = 0,
|
|
podr = 0,
|
|
pdat = 0;
|
|
iop_conf_t *iopc = (iop_conf_t *) & iop_conf_tab[portnum][0];
|
|
iop_conf_t *eiopc = iopc + 32;
|
|
uint msk = 1;
|
|
|
|
/*
|
|
* NOTE:
|
|
* index 0 refers to pin 31,
|
|
* index 31 refers to pin 0
|
|
*/
|
|
while (iopc < eiopc) {
|
|
if (iopc->conf) {
|
|
pmsk |= msk;
|
|
if (iopc->ppar)
|
|
ppar |= msk;
|
|
if (iopc->psor)
|
|
psor |= msk;
|
|
if (iopc->pdir)
|
|
pdir |= msk;
|
|
if (iopc->podr)
|
|
podr |= msk;
|
|
if (iopc->pdat)
|
|
pdat |= msk;
|
|
}
|
|
|
|
msk <<= 1;
|
|
iopc++;
|
|
}
|
|
|
|
if (pmsk != 0) {
|
|
volatile ioport_t *iop = ioport_addr (cpm, portnum);
|
|
uint tpmsk = ~pmsk;
|
|
|
|
/*
|
|
* the (somewhat confused) paragraph at the
|
|
* bottom of page 35-5 warns that there might
|
|
* be "unknown behaviour" when programming
|
|
* PSORx and PDIRx, if PPARx = 1, so I
|
|
* decided this meant I had to disable the
|
|
* dedicated function first, and enable it
|
|
* last.
|
|
*/
|
|
iop->ppar &= tpmsk;
|
|
iop->psor = (iop->psor & tpmsk) | psor;
|
|
iop->podr = (iop->podr & tpmsk) | podr;
|
|
iop->pdat = (iop->pdat & tpmsk) | pdat;
|
|
iop->pdir = (iop->pdir & tpmsk) | pdir;
|
|
iop->ppar |= ppar;
|
|
}
|
|
}
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_FSL_CPC
|
|
static void enable_cpc(void)
|
|
{
|
|
int i;
|
|
u32 size = 0;
|
|
|
|
cpc_corenet_t *cpc = (cpc_corenet_t *)CONFIG_SYS_FSL_CPC_ADDR;
|
|
|
|
for (i = 0; i < CONFIG_SYS_NUM_CPC; i++, cpc++) {
|
|
u32 cpccfg0 = in_be32(&cpc->cpccfg0);
|
|
size += CPC_CFG0_SZ_K(cpccfg0);
|
|
|
|
out_be32(&cpc->cpccsr0, CPC_CSR0_CE | CPC_CSR0_PE);
|
|
/* Read back to sync write */
|
|
in_be32(&cpc->cpccsr0);
|
|
|
|
}
|
|
|
|
printf("Corenet Platform Cache: %d KB enabled\n", size);
|
|
}
|
|
|
|
void invalidate_cpc(void)
|
|
{
|
|
int i;
|
|
cpc_corenet_t *cpc = (cpc_corenet_t *)CONFIG_SYS_FSL_CPC_ADDR;
|
|
|
|
for (i = 0; i < CONFIG_SYS_NUM_CPC; i++, cpc++) {
|
|
/* Flash invalidate the CPC and clear all the locks */
|
|
out_be32(&cpc->cpccsr0, CPC_CSR0_FI | CPC_CSR0_LFC);
|
|
while (in_be32(&cpc->cpccsr0) & (CPC_CSR0_FI | CPC_CSR0_LFC))
|
|
;
|
|
}
|
|
}
|
|
#else
|
|
#define enable_cpc()
|
|
#define invalidate_cpc()
|
|
#endif /* CONFIG_SYS_FSL_CPC */
|
|
|
|
/*
|
|
* Breathe some life into the CPU...
|
|
*
|
|
* Set up the memory map
|
|
* initialize a bunch of registers
|
|
*/
|
|
|
|
#ifdef CONFIG_FSL_CORENET
|
|
static void corenet_tb_init(void)
|
|
{
|
|
volatile ccsr_rcpm_t *rcpm =
|
|
(void *)(CONFIG_SYS_FSL_CORENET_RCPM_ADDR);
|
|
volatile ccsr_pic_t *pic =
|
|
(void *)(CONFIG_SYS_MPC85xx_PIC_ADDR);
|
|
u32 whoami = in_be32(&pic->whoami);
|
|
|
|
/* Enable the timebase register for this core */
|
|
out_be32(&rcpm->ctbenrl, (1 << whoami));
|
|
}
|
|
#endif
|
|
|
|
void cpu_init_f (void)
|
|
{
|
|
extern void m8560_cpm_reset (void);
|
|
#ifdef CONFIG_MPC8548
|
|
ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
|
|
uint svr = get_svr();
|
|
|
|
/*
|
|
* CPU2 errata workaround: A core hang possible while executing
|
|
* a msync instruction and a snoopable transaction from an I/O
|
|
* master tagged to make quick forward progress is present.
|
|
* Fixed in silicon rev 2.1.
|
|
*/
|
|
if ((SVR_MAJ(svr) == 1) || ((SVR_MAJ(svr) == 2 && SVR_MIN(svr) == 0x0)))
|
|
out_be32(&ecm->eebpcr, in_be32(&ecm->eebpcr) | (1 << 16));
|
|
#endif
|
|
|
|
disable_tlb(14);
|
|
disable_tlb(15);
|
|
|
|
#ifdef CONFIG_CPM2
|
|
config_8560_ioports((ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR);
|
|
#endif
|
|
|
|
init_early_memctl_regs();
|
|
|
|
#if defined(CONFIG_CPM2)
|
|
m8560_cpm_reset();
|
|
#endif
|
|
#ifdef CONFIG_QE
|
|
/* Config QE ioports */
|
|
config_qe_ioports();
|
|
#endif
|
|
#if defined(CONFIG_FSL_DMA)
|
|
dma_init();
|
|
#endif
|
|
#ifdef CONFIG_FSL_CORENET
|
|
corenet_tb_init();
|
|
#endif
|
|
init_used_tlb_cams();
|
|
|
|
/* Invalidate the CPC before DDR gets enabled */
|
|
invalidate_cpc();
|
|
}
|
|
|
|
|
|
/*
|
|
* Initialize L2 as cache.
|
|
*
|
|
* The newer 8548, etc, parts have twice as much cache, but
|
|
* use the same bit-encoding as the older 8555, etc, parts.
|
|
*
|
|
*/
|
|
int cpu_init_r(void)
|
|
{
|
|
#ifdef CONFIG_SYS_LBC_LCRR
|
|
volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
|
|
#endif
|
|
|
|
#if defined(CONFIG_SYS_P4080_ERRATUM_CPU22)
|
|
flush_dcache();
|
|
mtspr(L1CSR2, (mfspr(L1CSR2) | L1CSR2_DCWS));
|
|
sync();
|
|
#endif
|
|
|
|
puts ("L2: ");
|
|
|
|
#if defined(CONFIG_L2_CACHE)
|
|
volatile ccsr_l2cache_t *l2cache = (void *)CONFIG_SYS_MPC85xx_L2_ADDR;
|
|
volatile uint cache_ctl;
|
|
uint svr, ver;
|
|
uint l2srbar;
|
|
u32 l2siz_field;
|
|
|
|
svr = get_svr();
|
|
ver = SVR_SOC_VER(svr);
|
|
|
|
asm("msync;isync");
|
|
cache_ctl = l2cache->l2ctl;
|
|
|
|
#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L2_ADDR)
|
|
if (cache_ctl & MPC85xx_L2CTL_L2E) {
|
|
/* Clear L2 SRAM memory-mapped base address */
|
|
out_be32(&l2cache->l2srbar0, 0x0);
|
|
out_be32(&l2cache->l2srbar1, 0x0);
|
|
|
|
/* set MBECCDIS=0, SBECCDIS=0 */
|
|
clrbits_be32(&l2cache->l2errdis,
|
|
(MPC85xx_L2ERRDIS_MBECC |
|
|
MPC85xx_L2ERRDIS_SBECC));
|
|
|
|
/* set L2E=0, L2SRAM=0 */
|
|
clrbits_be32(&l2cache->l2ctl,
|
|
(MPC85xx_L2CTL_L2E |
|
|
MPC85xx_L2CTL_L2SRAM_ENTIRE));
|
|
}
|
|
#endif
|
|
|
|
l2siz_field = (cache_ctl >> 28) & 0x3;
|
|
|
|
switch (l2siz_field) {
|
|
case 0x0:
|
|
printf(" unknown size (0x%08x)\n", cache_ctl);
|
|
return -1;
|
|
break;
|
|
case 0x1:
|
|
if (ver == SVR_8540 || ver == SVR_8560 ||
|
|
ver == SVR_8541 || ver == SVR_8541_E ||
|
|
ver == SVR_8555 || ver == SVR_8555_E) {
|
|
puts("128 KB ");
|
|
/* set L2E=1, L2I=1, & L2BLKSZ=1 (128 Kbyte) */
|
|
cache_ctl = 0xc4000000;
|
|
} else {
|
|
puts("256 KB ");
|
|
cache_ctl = 0xc0000000; /* set L2E=1, L2I=1, & L2SRAM=0 */
|
|
}
|
|
break;
|
|
case 0x2:
|
|
if (ver == SVR_8540 || ver == SVR_8560 ||
|
|
ver == SVR_8541 || ver == SVR_8541_E ||
|
|
ver == SVR_8555 || ver == SVR_8555_E) {
|
|
puts("256 KB ");
|
|
/* set L2E=1, L2I=1, & L2BLKSZ=2 (256 Kbyte) */
|
|
cache_ctl = 0xc8000000;
|
|
} else {
|
|
puts ("512 KB ");
|
|
/* set L2E=1, L2I=1, & L2SRAM=0 */
|
|
cache_ctl = 0xc0000000;
|
|
}
|
|
break;
|
|
case 0x3:
|
|
puts("1024 KB ");
|
|
/* set L2E=1, L2I=1, & L2SRAM=0 */
|
|
cache_ctl = 0xc0000000;
|
|
break;
|
|
}
|
|
|
|
if (l2cache->l2ctl & MPC85xx_L2CTL_L2E) {
|
|
puts("already enabled");
|
|
l2srbar = l2cache->l2srbar0;
|
|
#ifdef CONFIG_SYS_INIT_L2_ADDR
|
|
if (l2cache->l2ctl & MPC85xx_L2CTL_L2SRAM_ENTIRE
|
|
&& l2srbar >= CONFIG_SYS_FLASH_BASE) {
|
|
l2srbar = CONFIG_SYS_INIT_L2_ADDR;
|
|
l2cache->l2srbar0 = l2srbar;
|
|
printf("moving to 0x%08x", CONFIG_SYS_INIT_L2_ADDR);
|
|
}
|
|
#endif /* CONFIG_SYS_INIT_L2_ADDR */
|
|
puts("\n");
|
|
} else {
|
|
asm("msync;isync");
|
|
l2cache->l2ctl = cache_ctl; /* invalidate & enable */
|
|
asm("msync;isync");
|
|
puts("enabled\n");
|
|
}
|
|
#elif defined(CONFIG_BACKSIDE_L2_CACHE)
|
|
u32 l2cfg0 = mfspr(SPRN_L2CFG0);
|
|
|
|
/* invalidate the L2 cache */
|
|
mtspr(SPRN_L2CSR0, (L2CSR0_L2FI|L2CSR0_L2LFC));
|
|
while (mfspr(SPRN_L2CSR0) & (L2CSR0_L2FI|L2CSR0_L2LFC))
|
|
;
|
|
|
|
#ifdef CONFIG_SYS_CACHE_STASHING
|
|
/* set stash id to (coreID) * 2 + 32 + L2 (1) */
|
|
mtspr(SPRN_L2CSR1, (32 + 1));
|
|
#endif
|
|
|
|
/* enable the cache */
|
|
mtspr(SPRN_L2CSR0, CONFIG_SYS_INIT_L2CSR0);
|
|
|
|
if (CONFIG_SYS_INIT_L2CSR0 & L2CSR0_L2E) {
|
|
while (!(mfspr(SPRN_L2CSR0) & L2CSR0_L2E))
|
|
;
|
|
printf("%d KB enabled\n", (l2cfg0 & 0x3fff) * 64);
|
|
}
|
|
#else
|
|
puts("disabled\n");
|
|
#endif
|
|
|
|
enable_cpc();
|
|
|
|
#ifdef CONFIG_QE
|
|
uint qe_base = CONFIG_SYS_IMMR + 0x00080000; /* QE immr base */
|
|
qe_init(qe_base);
|
|
qe_reset();
|
|
#endif
|
|
|
|
#if defined(CONFIG_SYS_HAS_SERDES)
|
|
/* needs to be in ram since code uses global static vars */
|
|
fsl_serdes_init();
|
|
#endif
|
|
|
|
#if defined(CONFIG_MP)
|
|
setup_mp();
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_LBC_LCRR
|
|
/*
|
|
* Modify the CLKDIV field of LCRR register to improve the writing
|
|
* speed for NOR flash.
|
|
*/
|
|
clrsetbits_be32(&lbc->lcrr, LCRR_CLKDIV, CONFIG_SYS_LBC_LCRR);
|
|
__raw_readl(&lbc->lcrr);
|
|
isync();
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
extern void setup_ivors(void);
|
|
|
|
void arch_preboot_os(void)
|
|
{
|
|
u32 msr;
|
|
|
|
/*
|
|
* We are changing interrupt offsets and are about to boot the OS so
|
|
* we need to make sure we disable all async interrupts. EE is already
|
|
* disabled by the time we get called.
|
|
*/
|
|
msr = mfmsr();
|
|
msr &= ~(MSR_ME|MSR_CE|MSR_DE);
|
|
mtmsr(msr);
|
|
|
|
setup_ivors();
|
|
}
|
|
|
|
#if defined(CONFIG_CMD_SATA) && defined(CONFIG_FSL_SATA)
|
|
int sata_initialize(void)
|
|
{
|
|
if (is_serdes_configured(SATA1) || is_serdes_configured(SATA2))
|
|
return __sata_initialize();
|
|
|
|
return 1;
|
|
}
|
|
#endif
|
|
|