upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
3347 lines
172 KiB
3347 lines
172 KiB
/*----------------------------------------------------------------------------+
|
|
|
|
|
| This source code has been made available to you by IBM on an AS-IS
|
|
| basis. Anyone receiving this source is licensed under IBM
|
|
| copyrights to use it in any way he or she deems fit, including
|
|
| copying it, modifying it, compiling it, and redistributing it either
|
|
| with or without modifications. No license under IBM patents or
|
|
| patent applications is to be implied by the copyright license.
|
|
|
|
|
| Any user of this software should understand that IBM cannot provide
|
|
| technical support for this software and will not be responsible for
|
|
| any consequences resulting from the use of this software.
|
|
|
|
|
| Any person who transfers this source code or any derivative work
|
|
| must include the IBM copyright notice, this paragraph, and the
|
|
| preceding two paragraphs in the transferred software.
|
|
|
|
|
| COPYRIGHT I B M CORPORATION 1999
|
|
| LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
|
|
+----------------------------------------------------------------------------*/
|
|
|
|
#ifndef __PPC440_H__
|
|
#define __PPC440_H__
|
|
|
|
/*--------------------------------------------------------------------- */
|
|
/* Special Purpose Registers */
|
|
/*--------------------------------------------------------------------- */
|
|
#define xer_reg 0x001
|
|
#define lr_reg 0x008
|
|
#define dec 0x016 /* decrementer */
|
|
#define srr0 0x01a /* save/restore register 0 */
|
|
#define srr1 0x01b /* save/restore register 1 */
|
|
#define pid 0x030 /* process id */
|
|
#define decar 0x036 /* decrementer auto-reload */
|
|
#define csrr0 0x03a /* critical save/restore register 0 */
|
|
#define csrr1 0x03b /* critical save/restore register 1 */
|
|
#define dear 0x03d /* data exception address register */
|
|
#define esr 0x03e /* exception syndrome register */
|
|
#define ivpr 0x03f /* interrupt prefix register */
|
|
#define usprg0 0x100 /* user special purpose register general 0 */
|
|
#define usprg1 0x110 /* user special purpose register general 1 */
|
|
#define tblr 0x10c /* time base lower, read only */
|
|
#define tbur 0x10d /* time base upper, read only */
|
|
#define sprg1 0x111 /* special purpose register general 1 */
|
|
#define sprg2 0x112 /* special purpose register general 2 */
|
|
#define sprg3 0x113 /* special purpose register general 3 */
|
|
#define sprg4 0x114 /* special purpose register general 4 */
|
|
#define sprg5 0x115 /* special purpose register general 5 */
|
|
#define sprg6 0x116 /* special purpose register general 6 */
|
|
#define sprg7 0x117 /* special purpose register general 7 */
|
|
#define tbl 0x11c /* time base lower (supervisor)*/
|
|
#define tbu 0x11d /* time base upper (supervisor)*/
|
|
#define pir 0x11e /* processor id register */
|
|
/*#define pvr 0x11f processor version register */
|
|
#define dbsr 0x130 /* debug status register */
|
|
#define dbcr0 0x134 /* debug control register 0 */
|
|
#define dbcr1 0x135 /* debug control register 1 */
|
|
#define dbcr2 0x136 /* debug control register 2 */
|
|
#define iac1 0x138 /* instruction address compare 1 */
|
|
#define iac2 0x139 /* instruction address compare 2 */
|
|
#define iac3 0x13a /* instruction address compare 3 */
|
|
#define iac4 0x13b /* instruction address compare 4 */
|
|
#define dac1 0x13c /* data address compare 1 */
|
|
#define dac2 0x13d /* data address compare 2 */
|
|
#define dvc1 0x13e /* data value compare 1 */
|
|
#define dvc2 0x13f /* data value compare 2 */
|
|
#define tsr 0x150 /* timer status register */
|
|
#define tcr 0x154 /* timer control register */
|
|
#define ivor0 0x190 /* interrupt vector offset register 0 */
|
|
#define ivor1 0x191 /* interrupt vector offset register 1 */
|
|
#define ivor2 0x192 /* interrupt vector offset register 2 */
|
|
#define ivor3 0x193 /* interrupt vector offset register 3 */
|
|
#define ivor4 0x194 /* interrupt vector offset register 4 */
|
|
#define ivor5 0x195 /* interrupt vector offset register 5 */
|
|
#define ivor6 0x196 /* interrupt vector offset register 6 */
|
|
#define ivor7 0x197 /* interrupt vector offset register 7 */
|
|
#define ivor8 0x198 /* interrupt vector offset register 8 */
|
|
#define ivor9 0x199 /* interrupt vector offset register 9 */
|
|
#define ivor10 0x19a /* interrupt vector offset register 10 */
|
|
#define ivor11 0x19b /* interrupt vector offset register 11 */
|
|
#define ivor12 0x19c /* interrupt vector offset register 12 */
|
|
#define ivor13 0x19d /* interrupt vector offset register 13 */
|
|
#define ivor14 0x19e /* interrupt vector offset register 14 */
|
|
#define ivor15 0x19f /* interrupt vector offset register 15 */
|
|
#if defined(CONFIG_440GX) || \
|
|
defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
|
|
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
|
|
defined(CONFIG_440SP) || defined(CONFIG_440SPE)
|
|
#define mcsrr0 0x23a /* machine check save/restore register 0 */
|
|
#define mcsrr1 0x23b /* mahcine check save/restore register 1 */
|
|
#define mcsr 0x23c /* machine check status register */
|
|
#endif
|
|
#define inv0 0x370 /* instruction cache normal victim 0 */
|
|
#define inv1 0x371 /* instruction cache normal victim 1 */
|
|
#define inv2 0x372 /* instruction cache normal victim 2 */
|
|
#define inv3 0x373 /* instruction cache normal victim 3 */
|
|
#define itv0 0x374 /* instruction cache transient victim 0 */
|
|
#define itv1 0x375 /* instruction cache transient victim 1 */
|
|
#define itv2 0x376 /* instruction cache transient victim 2 */
|
|
#define itv3 0x377 /* instruction cache transient victim 3 */
|
|
#define dnv0 0x390 /* data cache normal victim 0 */
|
|
#define dnv1 0x391 /* data cache normal victim 1 */
|
|
#define dnv2 0x392 /* data cache normal victim 2 */
|
|
#define dnv3 0x393 /* data cache normal victim 3 */
|
|
#define dtv0 0x394 /* data cache transient victim 0 */
|
|
#define dtv1 0x395 /* data cache transient victim 1 */
|
|
#define dtv2 0x396 /* data cache transient victim 2 */
|
|
#define dtv3 0x397 /* data cache transient victim 3 */
|
|
#define dvlim 0x398 /* data cache victim limit */
|
|
#define ivlim 0x399 /* instruction cache victim limit */
|
|
#define rstcfg 0x39b /* reset configuration */
|
|
#define dcdbtrl 0x39c /* data cache debug tag register low */
|
|
#define dcdbtrh 0x39d /* data cache debug tag register high */
|
|
#define icdbtrl 0x39e /* instruction cache debug tag register low */
|
|
#define icdbtrh 0x39f /* instruction cache debug tag register high */
|
|
#define mmucr 0x3b2 /* mmu control register */
|
|
#define ccr0 0x3b3 /* core configuration register 0 */
|
|
#define ccr1 0x378 /* core configuration for 440x5 only */
|
|
#define icdbdr 0x3d3 /* instruction cache debug data register */
|
|
#define dbdr 0x3f3 /* debug data register */
|
|
|
|
/******************************************************************************
|
|
* DCRs & Related
|
|
******************************************************************************/
|
|
|
|
/*-----------------------------------------------------------------------------
|
|
| Clocking Controller
|
|
+----------------------------------------------------------------------------*/
|
|
#define CLOCKING_DCR_BASE 0x0c
|
|
#define clkcfga (CLOCKING_DCR_BASE+0x0)
|
|
#define clkcfgd (CLOCKING_DCR_BASE+0x1)
|
|
|
|
/* values for clkcfga register - indirect addressing of these regs */
|
|
#define clk_clkukpd 0x0020
|
|
#define clk_pllc 0x0040
|
|
#define clk_plld 0x0060
|
|
#define clk_primad 0x0080
|
|
#define clk_primbd 0x00a0
|
|
#define clk_opbd 0x00c0
|
|
#define clk_perd 0x00e0
|
|
#define clk_mald 0x0100
|
|
#define clk_spcid 0x0120
|
|
#define clk_icfg 0x0140
|
|
|
|
/* 440gx sdr register definations */
|
|
#define SDR_DCR_BASE 0x0e
|
|
#define sdrcfga (SDR_DCR_BASE+0x0)
|
|
#define sdrcfgd (SDR_DCR_BASE+0x1)
|
|
#define sdr_sdstp0 0x0020 /* */
|
|
#define sdr_sdstp1 0x0021 /* */
|
|
#define sdr_pinstp 0x0040
|
|
#define sdr_sdcs 0x0060
|
|
#define sdr_ecid0 0x0080
|
|
#define sdr_ecid1 0x0081
|
|
#define sdr_ecid2 0x0082
|
|
#define sdr_jtag 0x00c0
|
|
#if !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX)
|
|
#define sdr_ddrdl 0x00e0
|
|
#else
|
|
#define sdr_cfg 0x00e0
|
|
#define SDR_CFG_LT2_MASK 0x01000000 /* Leakage test 2*/
|
|
#define SDR_CFG_64_32BITS_MASK 0x01000000 /* Switch DDR 64 bits or 32 bits */
|
|
#define SDR_CFG_32BITS 0x00000000 /* 32 bits */
|
|
#define SDR_CFG_64BITS 0x01000000 /* 64 bits */
|
|
#define SDR_CFG_MC_V2518_MASK 0x02000000 /* Low VDD2518 (2.5 or 1.8V) */
|
|
#define SDR_CFG_MC_V25 0x00000000 /* 2.5 V */
|
|
#define SDR_CFG_MC_V18 0x02000000 /* 1.8 V */
|
|
#endif /* !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX) */
|
|
#define sdr_ebc 0x0100
|
|
#define sdr_uart0 0x0120 /* UART0 Config */
|
|
#define sdr_uart1 0x0121 /* UART1 Config */
|
|
#define sdr_uart2 0x0122 /* UART2 Config */
|
|
#define sdr_uart3 0x0123 /* UART3 Config */
|
|
#define sdr_cp440 0x0180
|
|
#define sdr_xcr 0x01c0
|
|
#define sdr_xpllc 0x01c1
|
|
#define sdr_xplld 0x01c2
|
|
#define sdr_srst 0x0200
|
|
#define sdr_slpipe 0x0220
|
|
#define sdr_amp0 0x0240 /* Override PLB4 prioritiy for up to 8 masters */
|
|
#define sdr_amp1 0x0241 /* Override PLB3 prioritiy for up to 8 masters */
|
|
#define sdr_mirq0 0x0260
|
|
#define sdr_mirq1 0x0261
|
|
#define sdr_maltbl 0x0280
|
|
#define sdr_malrbl 0x02a0
|
|
#define sdr_maltbs 0x02c0
|
|
#define sdr_malrbs 0x02e0
|
|
#define sdr_pci0 0x0300
|
|
#define sdr_usb0 0x0320
|
|
#define sdr_cust0 0x4000
|
|
#define sdr_cust1 0x4002
|
|
#define sdr_pfc0 0x4100 /* Pin Function 0 */
|
|
#define sdr_pfc1 0x4101 /* Pin Function 1 */
|
|
#define sdr_plbtr 0x4200
|
|
#define sdr_mfr 0x4300 /* SDR0_MFR reg */
|
|
|
|
#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) /* test-only!!!! */
|
|
#define DDR0_00 0x00
|
|
#define DDR0_01 0x01
|
|
#define DDR0_02 0x02
|
|
#define DDR0_03 0x03
|
|
#define DDR0_04 0x04
|
|
#define DDR0_05 0x05
|
|
#define DDR0_06 0x06
|
|
#define DDR0_07 0x07
|
|
#define DDR0_08 0x08
|
|
#define DDR0_09 0x09
|
|
#define DDR0_10 0x0A
|
|
#define DDR0_11 0x0B
|
|
#define DDR0_12 0x0C
|
|
#define DDR0_13 0x0D
|
|
#define DDR0_14 0x0E
|
|
#define DDR0_15 0x0F
|
|
#define DDR0_16 0x10
|
|
#define DDR0_17 0x11
|
|
#define DDR0_18 0x12
|
|
#define DDR0_19 0x13
|
|
#define DDR0_20 0x14
|
|
#define DDR0_21 0x15
|
|
#define DDR0_22 0x16
|
|
#define DDR0_23 0x17
|
|
#define DDR0_24 0x18
|
|
#define DDR0_25 0x19
|
|
#define DDR0_26 0x1A
|
|
#define DDR0_27 0x1B
|
|
#define DDR0_28 0x1C
|
|
#define DDR0_29 0x1D
|
|
#define DDR0_30 0x1E
|
|
#define DDR0_31 0x1F
|
|
#define DDR0_32 0x20
|
|
#define DDR0_33 0x21
|
|
#define DDR0_34 0x22
|
|
#define DDR0_35 0x23
|
|
#define DDR0_36 0x24
|
|
#define DDR0_37 0x25
|
|
#define DDR0_38 0x26
|
|
#define DDR0_39 0x27
|
|
#define DDR0_40 0x28
|
|
#define DDR0_41 0x29
|
|
#define DDR0_42 0x2A
|
|
#define DDR0_43 0x2B
|
|
#define DDR0_44 0x2C
|
|
#endif /*CONFIG_440EPX*/
|
|
|
|
/*-----------------------------------------------------------------------------
|
|
| SDRAM Controller
|
|
+----------------------------------------------------------------------------*/
|
|
#define SDRAM_DCR_BASE 0x10
|
|
#define memcfga (SDRAM_DCR_BASE+0x0) /* Memory configuration address reg */
|
|
#define memcfgd (SDRAM_DCR_BASE+0x1) /* Memory configuration data reg */
|
|
|
|
/* values for memcfga register - indirect addressing of these regs */
|
|
#define mem_besr0_clr 0x0000 /* bus error status reg 0 (clr) */
|
|
#define mem_besr0_set 0x0004 /* bus error status reg 0 (set) */
|
|
#define mem_besr1_clr 0x0008 /* bus error status reg 1 (clr) */
|
|
#define mem_besr1_set 0x000c /* bus error status reg 1 (set) */
|
|
#define mem_bear 0x0010 /* bus error address reg */
|
|
#define mem_mirq_clr 0x0011 /* bus master interrupt (clr) */
|
|
#define mem_mirq_set 0x0012 /* bus master interrupt (set) */
|
|
#define mem_slio 0x0018 /* ddr sdram slave interface options */
|
|
#define mem_cfg0 0x0020 /* ddr sdram options 0 */
|
|
#define mem_cfg1 0x0021 /* ddr sdram options 1 */
|
|
#define mem_devopt 0x0022 /* ddr sdram device options */
|
|
#define mem_mcsts 0x0024 /* memory controller status */
|
|
#define mem_rtr 0x0030 /* refresh timer register */
|
|
#define mem_pmit 0x0034 /* power management idle timer */
|
|
#define mem_uabba 0x0038 /* plb UABus base address */
|
|
#define mem_b0cr 0x0040 /* ddr sdram bank 0 configuration */
|
|
#define mem_b1cr 0x0044 /* ddr sdram bank 1 configuration */
|
|
#define mem_b2cr 0x0048 /* ddr sdram bank 2 configuration */
|
|
#define mem_b3cr 0x004c /* ddr sdram bank 3 configuration */
|
|
#define mem_tr0 0x0080 /* sdram timing register 0 */
|
|
#define mem_tr1 0x0081 /* sdram timing register 1 */
|
|
#define mem_clktr 0x0082 /* ddr clock timing register */
|
|
#define mem_wddctr 0x0083 /* write data/dm/dqs clock timing reg */
|
|
#define mem_dlycal 0x0084 /* delay line calibration register */
|
|
#define mem_eccesr 0x0098 /* ECC error status */
|
|
|
|
#ifdef CONFIG_440GX
|
|
#define sdr_amp 0x0240
|
|
#define sdr_xpllc 0x01c1
|
|
#define sdr_xplld 0x01c2
|
|
#define sdr_xcr 0x01c0
|
|
#define sdr_sdstp2 0x4001
|
|
#define sdr_sdstp3 0x4003
|
|
#endif /* CONFIG_440GX */
|
|
|
|
#ifdef CONFIG_440SPE
|
|
#undef sdr_sdstp2
|
|
#define sdr_sdstp2 0x0022
|
|
#undef sdr_sdstp3
|
|
#define sdr_sdstp3 0x0023
|
|
#define sdr_ddr0 0x00E1
|
|
#define sdr_uart2 0x0122
|
|
#define sdr_xcr0 0x01c0
|
|
/* #define sdr_xcr1 0x01c3 only one PCIX - SG */
|
|
/* #define sdr_xcr2 0x01c6 only one PCIX - SG */
|
|
#define sdr_xpllc0 0x01c1
|
|
#define sdr_xplld0 0x01c2
|
|
#define sdr_xpllc1 0x01c4 /*notRCW - SG */
|
|
#define sdr_xplld1 0x01c5 /*notRCW - SG */
|
|
#define sdr_xpllc2 0x01c7 /*notRCW - SG */
|
|
#define sdr_xplld2 0x01c8 /*notRCW - SG */
|
|
#define sdr_amp0 0x0240
|
|
#define sdr_amp1 0x0241
|
|
#define sdr_cust2 0x4004
|
|
#define sdr_cust3 0x4006
|
|
#define sdr_sdstp4 0x4001
|
|
#define sdr_sdstp5 0x4003
|
|
#define sdr_sdstp6 0x4005
|
|
#define sdr_sdstp7 0x4007
|
|
|
|
/*----------------------------------------------------------------------------+
|
|
| Core Configuration/MMU configuration for 440 (CCR1 for 440x5 only).
|
|
+----------------------------------------------------------------------------*/
|
|
#define CCR0_PRE 0x40000000
|
|
#define CCR0_CRPE 0x08000000
|
|
#define CCR0_DSTG 0x00200000
|
|
#define CCR0_DAPUIB 0x00100000
|
|
#define CCR0_DTB 0x00008000
|
|
#define CCR0_GICBT 0x00004000
|
|
#define CCR0_GDCBT 0x00002000
|
|
#define CCR0_FLSTA 0x00000100
|
|
#define CCR0_ICSLC_MASK 0x0000000C
|
|
#define CCR0_ICSLT_MASK 0x00000003
|
|
#define CCR1_TCS_MASK 0x00000080
|
|
#define CCR1_TCS_INTCLK 0x00000000
|
|
#define CCR1_TCS_EXTCLK 0x00000080
|
|
#define MMUCR_SEOA 0x01000000
|
|
#define MMUCR_U1TE 0x00400000
|
|
#define MMUCR_U2SWOAE 0x00200000
|
|
#define MMUCR_DULXE 0x00800000
|
|
#define MMUCR_IULXE 0x00400000
|
|
#define MMUCR_STS 0x00100000
|
|
#define MMUCR_STID_MASK 0x000000FF
|
|
|
|
#define SDR0_CFGADDR 0x00E
|
|
#define SDR0_CFGDATA 0x00F
|
|
|
|
/******************************************************************************
|
|
* PCI express defines
|
|
******************************************************************************/
|
|
#define SDR0_PE0UTLSET1 0x00000300 /* PE0 Upper transaction layer conf setting */
|
|
#define SDR0_PE0UTLSET2 0x00000301 /* PE0 Upper transaction layer conf setting 2 */
|
|
#define SDR0_PE0DLPSET 0x00000302 /* PE0 Data link & logical physical configuration */
|
|
#define SDR0_PE0LOOP 0x00000303 /* PE0 Loopback interface status */
|
|
#define SDR0_PE0RCSSET 0x00000304 /* PE0 Reset, clock & shutdown setting */
|
|
#define SDR0_PE0RCSSTS 0x00000305 /* PE0 Reset, clock & shutdown status */
|
|
#define SDR0_PE0HSSSET1L0 0x00000306 /* PE0 HSS Control Setting 1: Lane 0 */
|
|
#define SDR0_PE0HSSSET2L0 0x00000307 /* PE0 HSS Control Setting 2: Lane 0 */
|
|
#define SDR0_PE0HSSSTSL0 0x00000308 /* PE0 HSS Control Status : Lane 0 */
|
|
#define SDR0_PE0HSSSET1L1 0x00000309 /* PE0 HSS Control Setting 1: Lane 1 */
|
|
#define SDR0_PE0HSSSET2L1 0x0000030A /* PE0 HSS Control Setting 2: Lane 1 */
|
|
#define SDR0_PE0HSSSTSL1 0x0000030B /* PE0 HSS Control Status : Lane 1 */
|
|
#define SDR0_PE0HSSSET1L2 0x0000030C /* PE0 HSS Control Setting 1: Lane 2 */
|
|
#define SDR0_PE0HSSSET2L2 0x0000030D /* PE0 HSS Control Setting 2: Lane 2 */
|
|
#define SDR0_PE0HSSSTSL2 0x0000030E /* PE0 HSS Control Status : Lane 2 */
|
|
#define SDR0_PE0HSSSET1L3 0x0000030F /* PE0 HSS Control Setting 1: Lane 3 */
|
|
#define SDR0_PE0HSSSET2L3 0x00000310 /* PE0 HSS Control Setting 2: Lane 3 */
|
|
#define SDR0_PE0HSSSTSL3 0x00000311 /* PE0 HSS Control Status : Lane 3 */
|
|
#define SDR0_PE0HSSSET1L4 0x00000312 /* PE0 HSS Control Setting 1: Lane 4 */
|
|
#define SDR0_PE0HSSSET2L4 0x00000313 /* PE0 HSS Control Setting 2: Lane 4 */
|
|
#define SDR0_PE0HSSSTSL4 0x00000314 /* PE0 HSS Control Status : Lane 4 */
|
|
#define SDR0_PE0HSSSET1L5 0x00000315 /* PE0 HSS Control Setting 1: Lane 5 */
|
|
#define SDR0_PE0HSSSET2L5 0x00000316 /* PE0 HSS Control Setting 2: Lane 5 */
|
|
#define SDR0_PE0HSSSTSL5 0x00000317 /* PE0 HSS Control Status : Lane 5 */
|
|
#define SDR0_PE0HSSSET1L6 0x00000318 /* PE0 HSS Control Setting 1: Lane 6 */
|
|
#define SDR0_PE0HSSSET2L6 0x00000319 /* PE0 HSS Control Setting 2: Lane 6 */
|
|
#define SDR0_PE0HSSSTSL6 0x0000031A /* PE0 HSS Control Status : Lane 6 */
|
|
#define SDR0_PE0HSSSET1L7 0x0000031B /* PE0 HSS Control Setting 1: Lane 7 */
|
|
#define SDR0_PE0HSSSET2L7 0x0000031C /* PE0 HSS Control Setting 2: Lane 7 */
|
|
#define SDR0_PE0HSSSTSL7 0x0000031D /* PE0 HSS Control Status : Lane 7 */
|
|
#define SDR0_PE0HSSSEREN 0x0000031E /* PE0 Serdes Transmitter Enable */
|
|
#define SDR0_PE0LANEABCD 0x0000031F /* PE0 Lanes ABCD affectation */
|
|
#define SDR0_PE0LANEEFGH 0x00000320 /* PE0 Lanes EFGH affectation */
|
|
|
|
#define SDR0_PE1UTLSET1 0x00000340 /* PE1 Upper transaction layer conf setting */
|
|
#define SDR0_PE1UTLSET2 0x00000341 /* PE1 Upper transaction layer conf setting 2 */
|
|
#define SDR0_PE1DLPSET 0x00000342 /* PE1 Data link & logical physical configuration */
|
|
#define SDR0_PE1LOOP 0x00000343 /* PE1 Loopback interface status */
|
|
#define SDR0_PE1RCSSET 0x00000344 /* PE1 Reset, clock & shutdown setting */
|
|
#define SDR0_PE1RCSSTS 0x00000345 /* PE1 Reset, clock & shutdown status */
|
|
#define SDR0_PE1HSSSET1L0 0x00000346 /* PE1 HSS Control Setting 1: Lane 0 */
|
|
#define SDR0_PE1HSSSET2L0 0x00000347 /* PE1 HSS Control Setting 2: Lane 0 */
|
|
#define SDR0_PE1HSSSTSL0 0x00000348 /* PE1 HSS Control Status : Lane 0 */
|
|
#define SDR0_PE1HSSSET1L1 0x00000349 /* PE1 HSS Control Setting 1: Lane 1 */
|
|
#define SDR0_PE1HSSSET2L1 0x0000034A /* PE1 HSS Control Setting 2: Lane 1 */
|
|
#define SDR0_PE1HSSSTSL1 0x0000034B /* PE1 HSS Control Status : Lane 1 */
|
|
#define SDR0_PE1HSSSET1L2 0x0000034C /* PE1 HSS Control Setting 1: Lane 2 */
|
|
#define SDR0_PE1HSSSET2L2 0x0000034D /* PE1 HSS Control Setting 2: Lane 2 */
|
|
#define SDR0_PE1HSSSTSL2 0x0000034E /* PE1 HSS Control Status : Lane 2 */
|
|
#define SDR0_PE1HSSSET1L3 0x0000034F /* PE1 HSS Control Setting 1: Lane 3 */
|
|
#define SDR0_PE1HSSSET2L3 0x00000350 /* PE1 HSS Control Setting 2: Lane 3 */
|
|
#define SDR0_PE1HSSSTSL3 0x00000351 /* PE1 HSS Control Status : Lane 3 */
|
|
#define SDR0_PE1HSSSEREN 0x00000352 /* PE1 Serdes Transmitter Enable */
|
|
#define SDR0_PE1LANEABCD 0x00000353 /* PE1 Lanes ABCD affectation */
|
|
#define SDR0_PE2UTLSET1 0x00000370 /* PE2 Upper transaction layer conf setting */
|
|
#define SDR0_PE2UTLSET2 0x00000371 /* PE2 Upper transaction layer conf setting 2 */
|
|
#define SDR0_PE2DLPSET 0x00000372 /* PE2 Data link & logical physical configuration */
|
|
#define SDR0_PE2LOOP 0x00000373 /* PE2 Loopback interface status */
|
|
#define SDR0_PE2RCSSET 0x00000374 /* PE2 Reset, clock & shutdown setting */
|
|
#define SDR0_PE2RCSSTS 0x00000375 /* PE2 Reset, clock & shutdown status */
|
|
#define SDR0_PE2HSSSET1L0 0x00000376 /* PE2 HSS Control Setting 1: Lane 0 */
|
|
#define SDR0_PE2HSSSET2L0 0x00000377 /* PE2 HSS Control Setting 2: Lane 0 */
|
|
#define SDR0_PE2HSSSTSL0 0x00000378 /* PE2 HSS Control Status : Lane 0 */
|
|
#define SDR0_PE2HSSSET1L1 0x00000379 /* PE2 HSS Control Setting 1: Lane 1 */
|
|
#define SDR0_PE2HSSSET2L1 0x0000037A /* PE2 HSS Control Setting 2: Lane 1 */
|
|
#define SDR0_PE2HSSSTSL1 0x0000037B /* PE2 HSS Control Status : Lane 1 */
|
|
#define SDR0_PE2HSSSET1L2 0x0000037C /* PE2 HSS Control Setting 1: Lane 2 */
|
|
#define SDR0_PE2HSSSET2L2 0x0000037D /* PE2 HSS Control Setting 2: Lane 2 */
|
|
#define SDR0_PE2HSSSTSL2 0x0000037E /* PE2 HSS Control Status : Lane 2 */
|
|
#define SDR0_PE2HSSSET1L3 0x0000037F /* PE2 HSS Control Setting 1: Lane 3 */
|
|
#define SDR0_PE2HSSSET2L3 0x00000380 /* PE2 HSS Control Setting 2: Lane 3 */
|
|
#define SDR0_PE2HSSSTSL3 0x00000381 /* PE2 HSS Control Status : Lane 3 */
|
|
#define SDR0_PE2HSSSEREN 0x00000382 /* PE2 Serdes Transmitter Enable */
|
|
#define SDR0_PE2LANEABCD 0x00000383 /* PE2 Lanes ABCD affectation */
|
|
#define SDR0_PEGPLLSET1 0x000003A0 /* PE Pll LC Tank Setting1 */
|
|
#define SDR0_PEGPLLSET2 0x000003A1 /* PE Pll LC Tank Setting2 */
|
|
#define SDR0_PEGPLLSTS 0x000003A2 /* PE Pll LC Tank Status */
|
|
|
|
/*----------------------------------------------------------------------------+
|
|
| SDRAM Controller
|
|
+----------------------------------------------------------------------------*/
|
|
/*-----------------------------------------------------------------------------+
|
|
| SDRAM DLYCAL Options
|
|
+-----------------------------------------------------------------------------*/
|
|
#define SDRAM_DLYCAL_DLCV_MASK 0x000003FC
|
|
#define SDRAM_DLYCAL_DLCV_ENCODE(x) (((x)<<2) & SDRAM_DLYCAL_DLCV_MASK)
|
|
#define SDRAM_DLYCAL_DLCV_DECODE(x) (((x) & SDRAM_DLYCAL_DLCV_MASK)>>2)
|
|
|
|
/*----------------------------------------------------------------------------+
|
|
| Memory queue defines
|
|
+----------------------------------------------------------------------------*/
|
|
/* A REVOIR versus RWC - SG*/
|
|
#define SDRAMQ_DCR_BASE 0x040
|
|
|
|
#define SDRAM_R0BAS (SDRAMQ_DCR_BASE+0x0) /* rank 0 base address & size */
|
|
#define SDRAM_R1BAS (SDRAMQ_DCR_BASE+0x1) /* rank 1 base address & size */
|
|
#define SDRAM_R2BAS (SDRAMQ_DCR_BASE+0x2) /* rank 2 base address & size */
|
|
#define SDRAM_R3BAS (SDRAMQ_DCR_BASE+0x3) /* rank 3 base address & size */
|
|
#define SDRAM_CONF1HB (SDRAMQ_DCR_BASE+0x5) /* configuration 1 HB */
|
|
#define SDRAM_ERRSTATHB (SDRAMQ_DCR_BASE+0x7) /* error status HB */
|
|
#define SDRAM_ERRADDUHB (SDRAMQ_DCR_BASE+0x8) /* error address upper 32 HB */
|
|
#define SDRAM_ERRADDLHB (SDRAMQ_DCR_BASE+0x9) /* error address lower 32 HB */
|
|
#define SDRAM_PLBADDULL (SDRAMQ_DCR_BASE+0xA) /* PLB base address upper 32 LL */
|
|
#define SDRAM_CONF1LL (SDRAMQ_DCR_BASE+0xB) /* configuration 1 LL */
|
|
#define SDRAM_ERRSTATLL (SDRAMQ_DCR_BASE+0xC) /* error status LL */
|
|
#define SDRAM_ERRADDULL (SDRAMQ_DCR_BASE+0xD) /* error address upper 32 LL */
|
|
#define SDRAM_ERRADDLLL (SDRAMQ_DCR_BASE+0xE) /* error address lower 32 LL */
|
|
#define SDRAM_CONFPATHB (SDRAMQ_DCR_BASE+0xF) /* configuration between paths */
|
|
#define SDRAM_PLBADDUHB (SDRAMQ_DCR_BASE+0x10) /* PLB base address upper 32 LL */
|
|
|
|
/*-----------------------------------------------------------------------------+
|
|
| Memory Bank 0-7 configuration
|
|
+-----------------------------------------------------------------------------*/
|
|
#define SDRAM_RXBAS_SDBA_MASK 0xFF800000 /* Base address */
|
|
#define SDRAM_RXBAS_SDBA_ENCODE(n) ((((unsigned long)(n))&0xFFE00000)>>2)
|
|
#define SDRAM_RXBAS_SDBA_DECODE(n) ((((unsigned long)(n))&0xFFE00000)<<2)
|
|
#define SDRAM_RXBAS_SDSZ_MASK 0x0000FFC0 /* Size */
|
|
#define SDRAM_RXBAS_SDSZ_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<6)
|
|
#define SDRAM_RXBAS_SDSZ_DECODE(n) ((((unsigned long)(n))>>6)&0x3FF)
|
|
#define SDRAM_RXBAS_SDSZ_0 0x00000000 /* 0M */
|
|
#define SDRAM_RXBAS_SDSZ_8 0x0000FFC0 /* 8M */
|
|
#define SDRAM_RXBAS_SDSZ_16 0x0000FF80 /* 16M */
|
|
#define SDRAM_RXBAS_SDSZ_32 0x0000FF00 /* 32M */
|
|
#define SDRAM_RXBAS_SDSZ_64 0x0000FE00 /* 64M */
|
|
#define SDRAM_RXBAS_SDSZ_128 0x0000FC00 /* 128M */
|
|
#define SDRAM_RXBAS_SDSZ_256 0x0000F800 /* 256M */
|
|
#define SDRAM_RXBAS_SDSZ_512 0x0000F000 /* 512M */
|
|
#define SDRAM_RXBAS_SDSZ_1024 0x0000E000 /* 1024M */
|
|
#define SDRAM_RXBAS_SDSZ_2048 0x0000C000 /* 2048M */
|
|
#define SDRAM_RXBAS_SDSZ_4096 0x00008000 /* 4096M */
|
|
|
|
/*----------------------------------------------------------------------------+
|
|
| Memory controller defines
|
|
+----------------------------------------------------------------------------*/
|
|
#define SDRAMC_DCR_BASE 0x010
|
|
#define SDRAMC_CFGADDR (SDRAMC_DCR_BASE+0x0) /* Memory configuration add */
|
|
#define SDRAMC_CFGDATA (SDRAMC_DCR_BASE+0x1) /* Memory configuration data */
|
|
|
|
/* A REVOIR versus specs 4 bank - SG*/
|
|
#define SDRAM_MCSTAT 0x14 /* memory controller status */
|
|
#define SDRAM_MCOPT1 0x20 /* memory controller options 1 */
|
|
#define SDRAM_MCOPT2 0x21 /* memory controller options 2 */
|
|
#define SDRAM_MODT0 0x22 /* on die termination for bank 0 */
|
|
#define SDRAM_MODT1 0x23 /* on die termination for bank 1 */
|
|
#define SDRAM_MODT2 0x24 /* on die termination for bank 2 */
|
|
#define SDRAM_MODT3 0x25 /* on die termination for bank 3 */
|
|
#define SDRAM_CODT 0x26 /* on die termination for controller */
|
|
#define SDRAM_VVPR 0x27 /* variable VRef programmming */
|
|
#define SDRAM_OPARS 0x28 /* on chip driver control setup */
|
|
#define SDRAM_OPART 0x29 /* on chip driver control trigger */
|
|
#define SDRAM_RTR 0x30 /* refresh timer */
|
|
#define SDRAM_PMIT 0x34 /* power management idle timer */
|
|
#define SDRAM_MB0CF 0x40 /* memory bank 0 configuration */
|
|
#define SDRAM_MB1CF 0x44 /* memory bank 1 configuration */
|
|
#define SDRAM_MB2CF 0x48
|
|
#define SDRAM_MB3CF 0x4C
|
|
#define SDRAM_INITPLR0 0x50 /* manual initialization control */
|
|
#define SDRAM_INITPLR1 0x51 /* manual initialization control */
|
|
#define SDRAM_INITPLR2 0x52 /* manual initialization control */
|
|
#define SDRAM_INITPLR3 0x53 /* manual initialization control */
|
|
#define SDRAM_INITPLR4 0x54 /* manual initialization control */
|
|
#define SDRAM_INITPLR5 0x55 /* manual initialization control */
|
|
#define SDRAM_INITPLR6 0x56 /* manual initialization control */
|
|
#define SDRAM_INITPLR7 0x57 /* manual initialization control */
|
|
#define SDRAM_INITPLR8 0x58 /* manual initialization control */
|
|
#define SDRAM_INITPLR9 0x59 /* manual initialization control */
|
|
#define SDRAM_INITPLR10 0x5a /* manual initialization control */
|
|
#define SDRAM_INITPLR11 0x5b /* manual initialization control */
|
|
#define SDRAM_INITPLR12 0x5c /* manual initialization control */
|
|
#define SDRAM_INITPLR13 0x5d /* manual initialization control */
|
|
#define SDRAM_INITPLR14 0x5e /* manual initialization control */
|
|
#define SDRAM_INITPLR15 0x5f /* manual initialization control */
|
|
#define SDRAM_RQDC 0x70 /* read DQS delay control */
|
|
#define SDRAM_RFDC 0x74 /* read feedback delay control */
|
|
#define SDRAM_RDCC 0x78 /* read data capture control */
|
|
#define SDRAM_DLCR 0x7A /* delay line calibration */
|
|
#define SDRAM_CLKTR 0x80 /* DDR clock timing */
|
|
#define SDRAM_WRDTR 0x81 /* write data, DQS, DM clock, timing */
|
|
#define SDRAM_SDTR1 0x85 /* DDR SDRAM timing 1 */
|
|
#define SDRAM_SDTR2 0x86 /* DDR SDRAM timing 2 */
|
|
#define SDRAM_SDTR3 0x87 /* DDR SDRAM timing 3 */
|
|
#define SDRAM_MMODE 0x88 /* memory mode */
|
|
#define SDRAM_MEMODE 0x89 /* memory extended mode */
|
|
#define SDRAM_ECCCR 0x98 /* ECC error status */
|
|
#define SDRAM_CID 0xA4 /* core ID */
|
|
#define SDRAM_RID 0xA8 /* revision ID */
|
|
|
|
/*-----------------------------------------------------------------------------+
|
|
| Memory Controller Status
|
|
+-----------------------------------------------------------------------------*/
|
|
#define SDRAM_MCSTAT_MIC_MASK 0x80000000 /* Memory init status mask */
|
|
#define SDRAM_MCSTAT_MIC_NOTCOMP 0x00000000 /* Mem init not complete */
|
|
#define SDRAM_MCSTAT_MIC_COMP 0x80000000 /* Mem init complete */
|
|
#define SDRAM_MCSTAT_SRMS_MASK 0x40000000 /* Mem self refresh stat mask */
|
|
#define SDRAM_MCSTAT_SRMS_NOT_SF 0x00000000 /* Mem not in self refresh */
|
|
#define SDRAM_MCSTAT_SRMS_SF 0x40000000 /* Mem in self refresh */
|
|
#define SDRAM_MCSTAT_IDLE_MASK 0x20000000 /* Mem self refresh stat mask */
|
|
#define SDRAM_MCSTAT_IDLE_NOT 0x00000000 /* Mem contr not idle */
|
|
#define SDRAM_MCSTAT_IDLE 0x20000000 /* Mem contr idle */
|
|
|
|
/*-----------------------------------------------------------------------------+
|
|
| Memory Controller Options 1
|
|
+-----------------------------------------------------------------------------*/
|
|
#define SDRAM_MCOPT1_MCHK_MASK 0x30000000 /* Memory data err check mask*/
|
|
#define SDRAM_MCOPT1_MCHK_NON 0x00000000 /* No ECC generation */
|
|
#define SDRAM_MCOPT1_MCHK_GEN 0x20000000 /* ECC generation */
|
|
#define SDRAM_MCOPT1_MCHK_CHK 0x10000000 /* ECC generation and check */
|
|
#define SDRAM_MCOPT1_MCHK_CHK_REP 0x30000000 /* ECC generation, chk, report*/
|
|
#define SDRAM_MCOPT1_MCHK_CHK_DECODE(n) ((((unsigned long)(n))>>28)&0x3)
|
|
#define SDRAM_MCOPT1_RDEN_MASK 0x08000000 /* Registered DIMM mask */
|
|
#define SDRAM_MCOPT1_RDEN 0x08000000 /* Registered DIMM enable */
|
|
#define SDRAM_MCOPT1_PMU_MASK 0x06000000 /* Page management unit mask */
|
|
#define SDRAM_MCOPT1_PMU_CLOSE 0x00000000 /* PMU Close */
|
|
#define SDRAM_MCOPT1_PMU_OPEN 0x04000000 /* PMU Open */
|
|
#define SDRAM_MCOPT1_PMU_AUTOCLOSE 0x02000000 /* PMU AutoClose */
|
|
#define SDRAM_MCOPT1_DMWD_MASK 0x01000000 /* DRAM width mask */
|
|
#define SDRAM_MCOPT1_DMWD_32 0x00000000 /* 32 bits */
|
|
#define SDRAM_MCOPT1_DMWD_64 0x01000000 /* 64 bits */
|
|
#define SDRAM_MCOPT1_UIOS_MASK 0x00C00000 /* Unused IO State */
|
|
#define SDRAM_MCOPT1_BCNT_MASK 0x00200000 /* Bank count */
|
|
#define SDRAM_MCOPT1_4_BANKS 0x00000000 /* 4 Banks */
|
|
#define SDRAM_MCOPT1_8_BANKS 0x00200000 /* 8 Banks */
|
|
#define SDRAM_MCOPT1_DDR_TYPE_MASK 0x00100000 /* DDR Memory Type mask */
|
|
#define SDRAM_MCOPT1_DDR1_TYPE 0x00000000 /* DDR1 Memory Type */
|
|
#define SDRAM_MCOPT1_DDR2_TYPE 0x00100000 /* DDR2 Memory Type */
|
|
#define SDRAM_MCOPT1_QDEP 0x00020000 /* 4 commands deep */
|
|
#define SDRAM_MCOPT1_RWOO_MASK 0x00008000 /* Out of Order Read mask */
|
|
#define SDRAM_MCOPT1_RWOO_DISABLED 0x00000000 /* disabled */
|
|
#define SDRAM_MCOPT1_RWOO_ENABLED 0x00008000 /* enabled */
|
|
#define SDRAM_MCOPT1_WOOO_MASK 0x00004000 /* Out of Order Write mask */
|
|
#define SDRAM_MCOPT1_WOOO_DISABLED 0x00000000 /* disabled */
|
|
#define SDRAM_MCOPT1_WOOO_ENABLED 0x00004000 /* enabled */
|
|
#define SDRAM_MCOPT1_DCOO_MASK 0x00002000 /* All Out of Order mask */
|
|
#define SDRAM_MCOPT1_DCOO_DISABLED 0x00002000 /* disabled */
|
|
#define SDRAM_MCOPT1_DCOO_ENABLED 0x00000000 /* enabled */
|
|
#define SDRAM_MCOPT1_DREF_MASK 0x00001000 /* Deferred refresh mask */
|
|
#define SDRAM_MCOPT1_DREF_NORMAL 0x00000000 /* normal refresh */
|
|
#define SDRAM_MCOPT1_DREF_DEFER_4 0x00001000 /* defer up to 4 refresh cmd */
|
|
|
|
/*-----------------------------------------------------------------------------+
|
|
| Memory Controller Options 2
|
|
+-----------------------------------------------------------------------------*/
|
|
#define SDRAM_MCOPT2_SREN_MASK 0x80000000 /* Self Test mask */
|
|
#define SDRAM_MCOPT2_SREN_EXIT 0x00000000 /* Self Test exit */
|
|
#define SDRAM_MCOPT2_SREN_ENTER 0x80000000 /* Self Test enter */
|
|
#define SDRAM_MCOPT2_PMEN_MASK 0x40000000 /* Power Management mask */
|
|
#define SDRAM_MCOPT2_PMEN_DISABLE 0x00000000 /* disable */
|
|
#define SDRAM_MCOPT2_PMEN_ENABLE 0x40000000 /* enable */
|
|
#define SDRAM_MCOPT2_IPTR_MASK 0x20000000 /* Init Trigger Reg mask */
|
|
#define SDRAM_MCOPT2_IPTR_IDLE 0x00000000 /* idle */
|
|
#define SDRAM_MCOPT2_IPTR_EXECUTE 0x20000000 /* execute preloaded init */
|
|
#define SDRAM_MCOPT2_XSRP_MASK 0x10000000 /* Exit Self Refresh Prevent */
|
|
#define SDRAM_MCOPT2_XSRP_ALLOW 0x00000000 /* allow self refresh exit */
|
|
#define SDRAM_MCOPT2_XSRP_PREVENT 0x10000000 /* prevent self refresh exit */
|
|
#define SDRAM_MCOPT2_DCEN_MASK 0x08000000 /* SDRAM Controller Enable */
|
|
#define SDRAM_MCOPT2_DCEN_DISABLE 0x00000000 /* SDRAM Controller Enable */
|
|
#define SDRAM_MCOPT2_DCEN_ENABLE 0x08000000 /* SDRAM Controller Enable */
|
|
#define SDRAM_MCOPT2_ISIE_MASK 0x04000000 /* Init Seq Interruptable mas*/
|
|
#define SDRAM_MCOPT2_ISIE_DISABLE 0x00000000 /* disable */
|
|
#define SDRAM_MCOPT2_ISIE_ENABLE 0x04000000 /* enable */
|
|
|
|
/*-----------------------------------------------------------------------------+
|
|
| SDRAM Refresh Timer Register
|
|
+-----------------------------------------------------------------------------*/
|
|
#define SDRAM_RTR_RINT_MASK 0xFFF80000
|
|
#define SDRAM_RTR_RINT_ENCODE(n) ((((unsigned long)(n))&0xFFF8)<<16)
|
|
#define SDRAM_RTR_RINT_DECODE(n) ((((unsigned long)(n))>>16)&0xFFF8)
|
|
|
|
/*-----------------------------------------------------------------------------+
|
|
| SDRAM Read DQS Delay Control Register
|
|
+-----------------------------------------------------------------------------*/
|
|
#define SDRAM_RQDC_RQDE_MASK 0x80000000
|
|
#define SDRAM_RQDC_RQDE_DISABLE 0x00000000
|
|
#define SDRAM_RQDC_RQDE_ENABLE 0x80000000
|
|
#define SDRAM_RQDC_RQFD_MASK 0x000001FF
|
|
#define SDRAM_RQDC_RQFD_ENCODE(n) ((((unsigned long)(n))&0x1FF)<<0)
|
|
|
|
#define SDRAM_RQDC_RQFD_MAX 0x1FF
|
|
|
|
/*-----------------------------------------------------------------------------+
|
|
| SDRAM Read Data Capture Control Register
|
|
+-----------------------------------------------------------------------------*/
|
|
#define SDRAM_RDCC_RDSS_MASK 0xC0000000
|
|
#define SDRAM_RDCC_RDSS_T1 0x00000000
|
|
#define SDRAM_RDCC_RDSS_T2 0x40000000
|
|
#define SDRAM_RDCC_RDSS_T3 0x80000000
|
|
#define SDRAM_RDCC_RDSS_T4 0xC0000000
|
|
#define SDRAM_RDCC_RSAE_MASK 0x00000001
|
|
#define SDRAM_RDCC_RSAE_DISABLE 0x00000001
|
|
#define SDRAM_RDCC_RSAE_ENABLE 0x00000000
|
|
|
|
/*-----------------------------------------------------------------------------+
|
|
| SDRAM Read Feedback Delay Control Register
|
|
+-----------------------------------------------------------------------------*/
|
|
#define SDRAM_RFDC_ARSE_MASK 0x80000000
|
|
#define SDRAM_RFDC_ARSE_DISABLE 0x80000000
|
|
#define SDRAM_RFDC_ARSE_ENABLE 0x00000000
|
|
#define SDRAM_RFDC_RFOS_MASK 0x007F0000
|
|
#define SDRAM_RFDC_RFOS_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16)
|
|
#define SDRAM_RFDC_RFFD_MASK 0x000003FF
|
|
#define SDRAM_RFDC_RFFD_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<0)
|
|
|
|
#define SDRAM_RFDC_RFFD_MAX 0x7FF
|
|
|
|
/*-----------------------------------------------------------------------------+
|
|
| SDRAM Delay Line Calibration Register
|
|
+-----------------------------------------------------------------------------*/
|
|
#define SDRAM_DLCR_DCLM_MASK 0x80000000
|
|
#define SDRAM_DLCR_DCLM_MANUEL 0x80000000
|
|
#define SDRAM_DLCR_DCLM_AUTO 0x00000000
|
|
#define SDRAM_DLCR_DLCR_MASK 0x08000000
|
|
#define SDRAM_DLCR_DLCR_CALIBRATE 0x08000000
|
|
#define SDRAM_DLCR_DLCR_IDLE 0x00000000
|
|
#define SDRAM_DLCR_DLCS_MASK 0x07000000
|
|
#define SDRAM_DLCR_DLCS_NOT_RUN 0x00000000
|
|
#define SDRAM_DLCR_DLCS_IN_PROGRESS 0x01000000
|
|
#define SDRAM_DLCR_DLCS_COMPLETE 0x02000000
|
|
#define SDRAM_DLCR_DLCS_CONT_DONE 0x03000000
|
|
#define SDRAM_DLCR_DLCS_ERROR 0x04000000
|
|
#define SDRAM_DLCR_DLCV_MASK 0x000001FF
|
|
#define SDRAM_DLCR_DLCV_ENCODE(n) ((((unsigned long)(n))&0x1FF)<<0)
|
|
#define SDRAM_DLCR_DLCV_DECODE(n) ((((unsigned long)(n))>>0)&0x1FF)
|
|
|
|
/*-----------------------------------------------------------------------------+
|
|
| SDRAM Controller On Die Termination Register
|
|
+-----------------------------------------------------------------------------*/
|
|
#define SDRAM_CODT_ODT_ON 0x80000000
|
|
#define SDRAM_CODT_ODT_OFF 0x00000000
|
|
#define SDRAM_CODT_DQS_VOLTAGE_DDR_MASK 0x00000020
|
|
#define SDRAM_CODT_DQS_2_5_V_DDR1 0x00000000
|
|
#define SDRAM_CODT_DQS_1_8_V_DDR2 0x00000020
|
|
#define SDRAM_CODT_DQS_MASK 0x00000010
|
|
#define SDRAM_CODT_DQS_DIFFERENTIAL 0x00000000
|
|
#define SDRAM_CODT_DQS_SINGLE_END 0x00000010
|
|
#define SDRAM_CODT_CKSE_DIFFERENTIAL 0x00000000
|
|
#define SDRAM_CODT_CKSE_SINGLE_END 0x00000008
|
|
#define SDRAM_CODT_FEEBBACK_RCV_SINGLE_END 0x00000004
|
|
#define SDRAM_CODT_FEEBBACK_DRV_SINGLE_END 0x00000002
|
|
#define SDRAM_CODT_IO_HIZ 0x00000000
|
|
#define SDRAM_CODT_IO_NMODE 0x00000001
|
|
|
|
/*-----------------------------------------------------------------------------+
|
|
| SDRAM Mode Register
|
|
+-----------------------------------------------------------------------------*/
|
|
#define SDRAM_MMODE_WR_MASK 0x00000E00
|
|
#define SDRAM_MMODE_WR_DDR1 0x00000000
|
|
#define SDRAM_MMODE_WR_DDR2_3_CYC 0x00000400
|
|
#define SDRAM_MMODE_WR_DDR2_4_CYC 0x00000600
|
|
#define SDRAM_MMODE_WR_DDR2_5_CYC 0x00000800
|
|
#define SDRAM_MMODE_WR_DDR2_6_CYC 0x00000A00
|
|
#define SDRAM_MMODE_DCL_MASK 0x00000070
|
|
#define SDRAM_MMODE_DCL_DDR1_2_0_CLK 0x00000020
|
|
#define SDRAM_MMODE_DCL_DDR1_2_5_CLK 0x00000060
|
|
#define SDRAM_MMODE_DCL_DDR1_3_0_CLK 0x00000030
|
|
#define SDRAM_MMODE_DCL_DDR2_2_0_CLK 0x00000020
|
|
#define SDRAM_MMODE_DCL_DDR2_3_0_CLK 0x00000030
|
|
#define SDRAM_MMODE_DCL_DDR2_4_0_CLK 0x00000040
|
|
#define SDRAM_MMODE_DCL_DDR2_5_0_CLK 0x00000050
|
|
#define SDRAM_MMODE_DCL_DDR2_6_0_CLK 0x00000060
|
|
#define SDRAM_MMODE_DCL_DDR2_7_0_CLK 0x00000070
|
|
|
|
/*-----------------------------------------------------------------------------+
|
|
| SDRAM Extended Mode Register
|
|
+-----------------------------------------------------------------------------*/
|
|
#define SDRAM_MEMODE_DIC_MASK 0x00000002
|
|
#define SDRAM_MEMODE_DIC_NORMAL 0x00000000
|
|
#define SDRAM_MEMODE_DIC_WEAK 0x00000002
|
|
#define SDRAM_MEMODE_DLL_MASK 0x00000001
|
|
#define SDRAM_MEMODE_DLL_DISABLE 0x00000001
|
|
#define SDRAM_MEMODE_DLL_ENABLE 0x00000000
|
|
#define SDRAM_MEMODE_RTT_MASK 0x00000044
|
|
#define SDRAM_MEMODE_RTT_DISABLED 0x00000000
|
|
#define SDRAM_MEMODE_RTT_75OHM 0x00000004
|
|
#define SDRAM_MEMODE_RTT_150OHM 0x00000040
|
|
#define SDRAM_MEMODE_DQS_MASK 0x00000400
|
|
#define SDRAM_MEMODE_DQS_DISABLE 0x00000400
|
|
#define SDRAM_MEMODE_DQS_ENABLE 0x00000000
|
|
|
|
/*-----------------------------------------------------------------------------+
|
|
| SDRAM Clock Timing Register
|
|
+-----------------------------------------------------------------------------*/
|
|
#define SDRAM_CLKTR_CLKP_MASK 0xC0000000
|
|
#define SDRAM_CLKTR_CLKP_0_DEG 0x00000000
|
|
#define SDRAM_CLKTR_CLKP_180_DEG_ADV 0x80000000
|
|
|
|
/*-----------------------------------------------------------------------------+
|
|
| SDRAM Write Timing Register
|
|
+-----------------------------------------------------------------------------*/
|
|
#define SDRAM_WRDTR_LLWP_MASK 0x10000000
|
|
#define SDRAM_WRDTR_LLWP_DIS 0x10000000
|
|
#define SDRAM_WRDTR_LLWP_1_CYC 0x00000000
|
|
#define SDRAM_WRDTR_WTR_MASK 0x0E000000
|
|
#define SDRAM_WRDTR_WTR_0_DEG 0x06000000
|
|
#define SDRAM_WRDTR_WTR_90_DEG_ADV 0x04000000
|
|
#define SDRAM_WRDTR_WTR_180_DEG_ADV 0x02000000
|
|
#define SDRAM_WRDTR_WTR_270_DEG_ADV 0x00000000
|
|
|
|
/*-----------------------------------------------------------------------------+
|
|
| SDRAM SDTR1 Options
|
|
+-----------------------------------------------------------------------------*/
|
|
#define SDRAM_SDTR1_LDOF_MASK 0x80000000
|
|
#define SDRAM_SDTR1_LDOF_1_CLK 0x00000000
|
|
#define SDRAM_SDTR1_LDOF_2_CLK 0x80000000
|
|
#define SDRAM_SDTR1_RTW_MASK 0x00F00000
|
|
#define SDRAM_SDTR1_RTW_2_CLK 0x00200000
|
|
#define SDRAM_SDTR1_RTW_3_CLK 0x00300000
|
|
#define SDRAM_SDTR1_WTWO_MASK 0x000F0000
|
|
#define SDRAM_SDTR1_WTWO_0_CLK 0x00000000
|
|
#define SDRAM_SDTR1_WTWO_1_CLK 0x00010000
|
|
#define SDRAM_SDTR1_RTRO_MASK 0x0000F000
|
|
#define SDRAM_SDTR1_RTRO_1_CLK 0x00001000
|
|
#define SDRAM_SDTR1_RTRO_2_CLK 0x00002000
|
|
|
|
/*-----------------------------------------------------------------------------+
|
|
| SDRAM SDTR2 Options
|
|
+-----------------------------------------------------------------------------*/
|
|
#define SDRAM_SDTR2_RCD_MASK 0xF0000000
|
|
#define SDRAM_SDTR2_RCD_1_CLK 0x10000000
|
|
#define SDRAM_SDTR2_RCD_2_CLK 0x20000000
|
|
#define SDRAM_SDTR2_RCD_3_CLK 0x30000000
|
|
#define SDRAM_SDTR2_RCD_4_CLK 0x40000000
|
|
#define SDRAM_SDTR2_RCD_5_CLK 0x50000000
|
|
#define SDRAM_SDTR2_WTR_MASK 0x0F000000
|
|
#define SDRAM_SDTR2_WTR_1_CLK 0x01000000
|
|
#define SDRAM_SDTR2_WTR_2_CLK 0x02000000
|
|
#define SDRAM_SDTR2_WTR_3_CLK 0x03000000
|
|
#define SDRAM_SDTR2_WTR_4_CLK 0x04000000
|
|
#define SDRAM_SDTR3_WTR_ENCODE(n) ((((unsigned long)(n))&0xF)<<24)
|
|
#define SDRAM_SDTR2_XSNR_MASK 0x00FF0000
|
|
#define SDRAM_SDTR2_XSNR_8_CLK 0x00080000
|
|
#define SDRAM_SDTR2_XSNR_16_CLK 0x00100000
|
|
#define SDRAM_SDTR2_XSNR_32_CLK 0x00200000
|
|
#define SDRAM_SDTR2_XSNR_64_CLK 0x00400000
|
|
#define SDRAM_SDTR2_WPC_MASK 0x0000F000
|
|
#define SDRAM_SDTR2_WPC_2_CLK 0x00002000
|
|
#define SDRAM_SDTR2_WPC_3_CLK 0x00003000
|
|
#define SDRAM_SDTR2_WPC_4_CLK 0x00004000
|
|
#define SDRAM_SDTR2_WPC_5_CLK 0x00005000
|
|
#define SDRAM_SDTR2_WPC_6_CLK 0x00006000
|
|
#define SDRAM_SDTR3_WPC_ENCODE(n) ((((unsigned long)(n))&0xF)<<12)
|
|
#define SDRAM_SDTR2_RPC_MASK 0x00000F00
|
|
#define SDRAM_SDTR2_RPC_2_CLK 0x00000200
|
|
#define SDRAM_SDTR2_RPC_3_CLK 0x00000300
|
|
#define SDRAM_SDTR2_RPC_4_CLK 0x00000400
|
|
#define SDRAM_SDTR2_RP_MASK 0x000000F0
|
|
#define SDRAM_SDTR2_RP_3_CLK 0x00000030
|
|
#define SDRAM_SDTR2_RP_4_CLK 0x00000040
|
|
#define SDRAM_SDTR2_RP_5_CLK 0x00000050
|
|
#define SDRAM_SDTR2_RP_6_CLK 0x00000060
|
|
#define SDRAM_SDTR2_RP_7_CLK 0x00000070
|
|
#define SDRAM_SDTR2_RRD_MASK 0x0000000F
|
|
#define SDRAM_SDTR2_RRD_2_CLK 0x00000002
|
|
#define SDRAM_SDTR2_RRD_3_CLK 0x00000003
|
|
|
|
/*-----------------------------------------------------------------------------+
|
|
| SDRAM SDTR3 Options
|
|
+-----------------------------------------------------------------------------*/
|
|
#define SDRAM_SDTR3_RAS_MASK 0x1F000000
|
|
#define SDRAM_SDTR3_RAS_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24)
|
|
#define SDRAM_SDTR3_RC_MASK 0x001F0000
|
|
#define SDRAM_SDTR3_RC_ENCODE(n) ((((unsigned long)(n))&0x1F)<<16)
|
|
#define SDRAM_SDTR3_XCS_MASK 0x00001F00
|
|
#define SDRAM_SDTR3_XCS 0x00000D00
|
|
#define SDRAM_SDTR3_RFC_MASK 0x0000003F
|
|
#define SDRAM_SDTR3_RFC_ENCODE(n) ((((unsigned long)(n))&0x3F)<<0)
|
|
|
|
/*-----------------------------------------------------------------------------+
|
|
| Memory Bank 0-1 configuration
|
|
+-----------------------------------------------------------------------------*/
|
|
#define SDRAM_BXCF_M_AM_MASK 0x00000F00 /* Addressing mode */
|
|
#define SDRAM_BXCF_M_AM_0 0x00000000 /* Mode 0 */
|
|
#define SDRAM_BXCF_M_AM_1 0x00000100 /* Mode 1 */
|
|
#define SDRAM_BXCF_M_AM_2 0x00000200 /* Mode 2 */
|
|
#define SDRAM_BXCF_M_AM_3 0x00000300 /* Mode 3 */
|
|
#define SDRAM_BXCF_M_AM_4 0x00000400 /* Mode 4 */
|
|
#define SDRAM_BXCF_M_AM_5 0x00000500 /* Mode 5 */
|
|
#define SDRAM_BXCF_M_AM_6 0x00000600 /* Mode 6 */
|
|
#define SDRAM_BXCF_M_AM_7 0x00000700 /* Mode 7 */
|
|
#define SDRAM_BXCF_M_AM_8 0x00000800 /* Mode 8 */
|
|
#define SDRAM_BXCF_M_AM_9 0x00000900 /* Mode 9 */
|
|
#define SDRAM_BXCF_M_BE_MASK 0x00000001 /* Memory Bank Enable */
|
|
#define SDRAM_BXCF_M_BE_DISABLE 0x00000000 /* Memory Bank Enable */
|
|
#define SDRAM_BXCF_M_BE_ENABLE 0x00000001 /* Memory Bank Enable */
|
|
#endif /* CONFIG_440SPE */
|
|
|
|
/*-----------------------------------------------------------------------------
|
|
| External Bus Controller
|
|
+----------------------------------------------------------------------------*/
|
|
#define EBC_DCR_BASE 0x12
|
|
#define ebccfga (EBC_DCR_BASE+0x0) /* External bus controller addr reg */
|
|
#define ebccfgd (EBC_DCR_BASE+0x1) /* External bus controller data reg */
|
|
/* values for ebccfga register - indirect addressing of these regs */
|
|
#define pb0cr 0x00 /* periph bank 0 config reg */
|
|
#define pb1cr 0x01 /* periph bank 1 config reg */
|
|
#define pb2cr 0x02 /* periph bank 2 config reg */
|
|
#define pb3cr 0x03 /* periph bank 3 config reg */
|
|
#define pb4cr 0x04 /* periph bank 4 config reg */
|
|
#define pb5cr 0x05 /* periph bank 5 config reg */
|
|
#define pb6cr 0x06 /* periph bank 6 config reg */
|
|
#define pb7cr 0x07 /* periph bank 7 config reg */
|
|
#define pb0ap 0x10 /* periph bank 0 access parameters */
|
|
#define pb1ap 0x11 /* periph bank 1 access parameters */
|
|
#define pb2ap 0x12 /* periph bank 2 access parameters */
|
|
#define pb3ap 0x13 /* periph bank 3 access parameters */
|
|
#define pb4ap 0x14 /* periph bank 4 access parameters */
|
|
#define pb5ap 0x15 /* periph bank 5 access parameters */
|
|
#define pb6ap 0x16 /* periph bank 6 access parameters */
|
|
#define pb7ap 0x17 /* periph bank 7 access parameters */
|
|
#define pbear 0x20 /* periph bus error addr reg */
|
|
#define pbesr 0x21 /* periph bus error status reg */
|
|
#define xbcfg 0x23 /* external bus configuration reg */
|
|
#define EBC0_CFG 0x23 /* external bus configuration reg */
|
|
#define xbcid 0x24 /* external bus core id reg */
|
|
|
|
#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
|
|
defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
|
|
|
|
/* PLB4 to PLB3 Bridge OUT */
|
|
#define P4P3_DCR_BASE 0x020
|
|
#define p4p3_esr0_read (P4P3_DCR_BASE+0x0)
|
|
#define p4p3_esr0_write (P4P3_DCR_BASE+0x1)
|
|
#define p4p3_eadr (P4P3_DCR_BASE+0x2)
|
|
#define p4p3_euadr (P4P3_DCR_BASE+0x3)
|
|
#define p4p3_esr1_read (P4P3_DCR_BASE+0x4)
|
|
#define p4p3_esr1_write (P4P3_DCR_BASE+0x5)
|
|
#define p4p3_confg (P4P3_DCR_BASE+0x6)
|
|
#define p4p3_pic (P4P3_DCR_BASE+0x7)
|
|
#define p4p3_peir (P4P3_DCR_BASE+0x8)
|
|
#define p4p3_rev (P4P3_DCR_BASE+0xA)
|
|
|
|
/* PLB3 to PLB4 Bridge IN */
|
|
#define P3P4_DCR_BASE 0x030
|
|
#define p3p4_esr0_read (P3P4_DCR_BASE+0x0)
|
|
#define p3p4_esr0_write (P3P4_DCR_BASE+0x1)
|
|
#define p3p4_eadr (P3P4_DCR_BASE+0x2)
|
|
#define p3p4_euadr (P3P4_DCR_BASE+0x3)
|
|
#define p3p4_esr1_read (P3P4_DCR_BASE+0x4)
|
|
#define p3p4_esr1_write (P3P4_DCR_BASE+0x5)
|
|
#define p3p4_confg (P3P4_DCR_BASE+0x6)
|
|
#define p3p4_pic (P3P4_DCR_BASE+0x7)
|
|
#define p3p4_peir (P3P4_DCR_BASE+0x8)
|
|
#define p3p4_rev (P3P4_DCR_BASE+0xA)
|
|
|
|
/* PLB3 Arbiter */
|
|
#define PLB3_DCR_BASE 0x070
|
|
#define plb3_revid (PLB3_DCR_BASE+0x2)
|
|
#define plb3_besr (PLB3_DCR_BASE+0x3)
|
|
#define plb3_bear (PLB3_DCR_BASE+0x6)
|
|
#define plb3_acr (PLB3_DCR_BASE+0x7)
|
|
|
|
/* PLB4 Arbiter - PowerPC440EP Pass1 */
|
|
#define PLB4_DCR_BASE 0x080
|
|
#define plb4_acr (PLB4_DCR_BASE+0x1)
|
|
#define plb4_revid (PLB4_DCR_BASE+0x2)
|
|
#define plb4_besr (PLB4_DCR_BASE+0x4)
|
|
#define plb4_bearl (PLB4_DCR_BASE+0x6)
|
|
#define plb4_bearh (PLB4_DCR_BASE+0x7)
|
|
|
|
#define PLB4_ACR_WRP (0x80000000 >> 7)
|
|
|
|
/* Nebula PLB4 Arbiter - PowerPC440EP */
|
|
#define PLB_ARBITER_BASE 0x80
|
|
|
|
#define plb0_revid (PLB_ARBITER_BASE+ 0x00)
|
|
#define plb0_acr (PLB_ARBITER_BASE+ 0x01)
|
|
#define plb0_acr_ppm_mask 0xF0000000
|
|
#define plb0_acr_ppm_fixed 0x00000000
|
|
#define plb0_acr_ppm_fair 0xD0000000
|
|
#define plb0_acr_hbu_mask 0x08000000
|
|
#define plb0_acr_hbu_disabled 0x00000000
|
|
#define plb0_acr_hbu_enabled 0x08000000
|
|
#define plb0_acr_rdp_mask 0x06000000
|
|
#define plb0_acr_rdp_disabled 0x00000000
|
|
#define plb0_acr_rdp_2deep 0x02000000
|
|
#define plb0_acr_rdp_3deep 0x04000000
|
|
#define plb0_acr_rdp_4deep 0x06000000
|
|
#define plb0_acr_wrp_mask 0x01000000
|
|
#define plb0_acr_wrp_disabled 0x00000000
|
|
#define plb0_acr_wrp_2deep 0x01000000
|
|
|
|
#define plb0_besrl (PLB_ARBITER_BASE+ 0x02)
|
|
#define plb0_besrh (PLB_ARBITER_BASE+ 0x03)
|
|
#define plb0_bearl (PLB_ARBITER_BASE+ 0x04)
|
|
#define plb0_bearh (PLB_ARBITER_BASE+ 0x05)
|
|
#define plb0_ccr (PLB_ARBITER_BASE+ 0x08)
|
|
|
|
#define plb1_acr (PLB_ARBITER_BASE+ 0x09)
|
|
#define plb1_acr_ppm_mask 0xF0000000
|
|
#define plb1_acr_ppm_fixed 0x00000000
|
|
#define plb1_acr_ppm_fair 0xD0000000
|
|
#define plb1_acr_hbu_mask 0x08000000
|
|
#define plb1_acr_hbu_disabled 0x00000000
|
|
#define plb1_acr_hbu_enabled 0x08000000
|
|
#define plb1_acr_rdp_mask 0x06000000
|
|
#define plb1_acr_rdp_disabled 0x00000000
|
|
#define plb1_acr_rdp_2deep 0x02000000
|
|
#define plb1_acr_rdp_3deep 0x04000000
|
|
#define plb1_acr_rdp_4deep 0x06000000
|
|
#define plb1_acr_wrp_mask 0x01000000
|
|
#define plb1_acr_wrp_disabled 0x00000000
|
|
#define plb1_acr_wrp_2deep 0x01000000
|
|
|
|
#define plb1_besrl (PLB_ARBITER_BASE+ 0x0A)
|
|
#define plb1_besrh (PLB_ARBITER_BASE+ 0x0B)
|
|
#define plb1_bearl (PLB_ARBITER_BASE+ 0x0C)
|
|
#define plb1_bearh (PLB_ARBITER_BASE+ 0x0D)
|
|
|
|
#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
|
|
/* Pin Function Control Register 1 */
|
|
#define SDR0_PFC1 0x4101
|
|
#define SDR0_PFC1_U1ME_MASK 0x02000000 /* UART1 Mode Enable */
|
|
#define SDR0_PFC1_U1ME_DSR_DTR 0x00000000 /* UART1 in DSR/DTR Mode */
|
|
#define SDR0_PFC1_U1ME_CTS_RTS 0x02000000 /* UART1 in CTS/RTS Mode */
|
|
#define SDR0_PFC1_U0ME_MASK 0x00080000 /* UART0 Mode Enable */
|
|
#define SDR0_PFC1_U0ME_DSR_DTR 0x00000000 /* UART0 in DSR/DTR Mode */
|
|
#define SDR0_PFC1_U0ME_CTS_RTS 0x00080000 /* UART0 in CTS/RTS Mode */
|
|
#define SDR0_PFC1_U0IM_MASK 0x00040000 /* UART0 Interface Mode */
|
|
#define SDR0_PFC1_U0IM_8PINS 0x00000000 /* UART0 Interface Mode 8 pins */
|
|
#define SDR0_PFC1_U0IM_4PINS 0x00040000 /* UART0 Interface Mode 4 pins */
|
|
#define SDR0_PFC1_SIS_MASK 0x00020000 /* SCP or IIC1 Selection */
|
|
#define SDR0_PFC1_SIS_SCP_SEL 0x00000000 /* SCP Selected */
|
|
#define SDR0_PFC1_SIS_IIC1_SEL 0x00020000 /* IIC1 Selected */
|
|
#define SDR0_PFC1_UES_MASK 0x00010000 /* USB2D_RX_Active / EBC_Hold Req Selection */
|
|
#define SDR0_PFC1_UES_USB2D_SEL 0x00000000 /* USB2D_RX_Active Selected */
|
|
#define SDR0_PFC1_UES_EBCHR_SEL 0x00010000 /* EBC_Hold Req Selected */
|
|
#define SDR0_PFC1_DIS_MASK 0x00008000 /* DMA_Req(1) / UIC_IRQ(5) Selection */
|
|
#define SDR0_PFC1_DIS_DMAR_SEL 0x00000000 /* DMA_Req(1) Selected */
|
|
#define SDR0_PFC1_DIS_UICIRQ5_SEL 0x00008000 /* UIC_IRQ(5) Selected */
|
|
#define SDR0_PFC1_ERE_MASK 0x00004000 /* EBC Mast.Ext.Req.En./GPIO0(27) Selection */
|
|
#define SDR0_PFC1_ERE_EXTR_SEL 0x00000000 /* EBC Mast.Ext.Req.En. Selected */
|
|
#define SDR0_PFC1_ERE_GPIO0_27_SEL 0x00004000 /* GPIO0(27) Selected */
|
|
#define SDR0_PFC1_UPR_MASK 0x00002000 /* USB2 Device Packet Reject Selection */
|
|
#define SDR0_PFC1_UPR_DISABLE 0x00000000 /* USB2 Device Packet Reject Disable */
|
|
#define SDR0_PFC1_UPR_ENABLE 0x00002000 /* USB2 Device Packet Reject Enable */
|
|
|
|
#define SDR0_PFC1_PLB_PME_MASK 0x00001000 /* PLB3/PLB4 Perf. Monitor En. Selection */
|
|
#define SDR0_PFC1_PLB_PME_PLB3_SEL 0x00000000 /* PLB3 Performance Monitor Enable */
|
|
#define SDR0_PFC1_PLB_PME_PLB4_SEL 0x00001000 /* PLB3 Performance Monitor Enable */
|
|
#define SDR0_PFC1_GFGGI_MASK 0x0000000F /* GPT Frequency Generation Gated In */
|
|
|
|
/* USB Control Register */
|
|
#define SDR0_USB0 0x0320
|
|
#define SDR0_USB0_USB_DEVSEL_MASK 0x00000002 /* USB Device Selection */
|
|
#define SDR0_USB0_USB20D_DEVSEL 0x00000000 /* USB2.0 Device Selected */
|
|
#define SDR0_USB0_USB11D_DEVSEL 0x00000002 /* USB1.1 Device Selected */
|
|
#define SDR0_USB0_LEEN_MASK 0x00000001 /* Little Endian selection */
|
|
#define SDR0_USB0_LEEN_DISABLE 0x00000000 /* Little Endian Disable */
|
|
#define SDR0_USB0_LEEN_ENABLE 0x00000001 /* Little Endian Enable */
|
|
|
|
/* Miscealleneaous Function Reg. */
|
|
#define SDR0_MFR 0x4300
|
|
#define SDR0_MFR_ETH0_CLK_SEL_MASK 0x08000000 /* Ethernet0 Clock Select */
|
|
#define SDR0_MFR_ETH0_CLK_SEL_EXT 0x00000000
|
|
#define SDR0_MFR_ETH1_CLK_SEL_MASK 0x04000000 /* Ethernet1 Clock Select */
|
|
#define SDR0_MFR_ETH1_CLK_SEL_EXT 0x00000000
|
|
#define SDR0_MFR_ZMII_MODE_MASK 0x03000000 /* ZMII Mode Mask */
|
|
#define SDR0_MFR_ZMII_MODE_MII 0x00000000 /* ZMII Mode MII */
|
|
#define SDR0_MFR_ZMII_MODE_SMII 0x01000000 /* ZMII Mode SMII */
|
|
#define SDR0_MFR_ZMII_MODE_RMII_10M 0x02000000 /* ZMII Mode RMII - 10 Mbs */
|
|
#define SDR0_MFR_ZMII_MODE_RMII_100M 0x03000000 /* ZMII Mode RMII - 100 Mbs */
|
|
#define SDR0_MFR_ZMII_MODE_BIT0 0x02000000 /* ZMII Mode Bit0 */
|
|
#define SDR0_MFR_ZMII_MODE_BIT1 0x01000000 /* ZMII Mode Bit1 */
|
|
#define SDR0_MFR_ZM_ENCODE(n) ((((unsigned long)(n))&0x3)<<24)
|
|
#define SDR0_MFR_ZM_DECODE(n) ((((unsigned long)(n))<<24)&0x3)
|
|
|
|
#define SDR0_MFR_ERRATA3_EN0 0x00800000
|
|
#define SDR0_MFR_ERRATA3_EN1 0x00400000
|
|
#define SDR0_MFR_PKT_REJ_MASK 0x00180000 /* Pkt Rej. Enable Mask */
|
|
#define SDR0_MFR_PKT_REJ_EN 0x00180000 /* Pkt Rej. Enable on both EMAC3 0-1 */
|
|
#define SDR0_MFR_PKT_REJ_EN0 0x00100000 /* Pkt Rej. Enable on EMAC3(0) */
|
|
#define SDR0_MFR_PKT_REJ_EN1 0x00080000 /* Pkt Rej. Enable on EMAC3(1) */
|
|
#define SDR0_MFR_PKT_REJ_POL 0x00200000 /* Packet Reject Polarity */
|
|
|
|
#endif /* defined(CONFIG_440EP) || defined(CONFIG_440GR) */
|
|
|
|
#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
|
|
#define SDR_USB2D0CR 0x0320
|
|
#define SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK 0x00000004 /* USB 2.0 Device/EBC Master Selection */
|
|
#define SDR0_USB2D0CR_USB2DEV_SELECTION 0x00000004 /* USB 2.0 Device Selection */
|
|
#define SDR0_USB2D0CR_EBC_SELECTION 0x00000000 /* EBC Selection */
|
|
|
|
#define SDR0_USB2D0CR_USB_DEV_INT_SEL_MASK 0x00000002 /* USB Device Interface Selection */
|
|
#define SDR0_USB2D0CR_USB20D_DEVSEL 0x00000000 /* USB2.0 Device Selected */
|
|
#define SDR0_USB2D0CR_USB11D_DEVSEL 0x00000002 /* USB1.1 Device Selected */
|
|
|
|
#define SDR0_USB2D0CR_LEEN_MASK 0x00000001 /* Little Endian selection */
|
|
#define SDR0_USB2D0CR_LEEN_DISABLE 0x00000000 /* Little Endian Disable */
|
|
#define SDR0_USB2D0CR_LEEN_ENABLE 0x00000001 /* Little Endian Enable */
|
|
|
|
/* USB2 Host Control Register */
|
|
#define SDR0_USB2H0CR 0x0340
|
|
#define SDR0_USB2H0CR_WDINT_MASK 0x00000001 /* Host UTMI Word Interface */
|
|
#define SDR0_USB2H0CR_WDINT_8BIT_60MHZ 0x00000000 /* 8-bit/60MHz */
|
|
#define SDR0_USB2H0CR_WDINT_16BIT_30MHZ 0x00000001 /* 16-bit/30MHz */
|
|
#define SDR0_USB2H0CR_EFLADJ_MASK 0x0000007e /* EHCI Frame Length Adjustment */
|
|
|
|
/* Pin Function Control Register 1 */
|
|
#define SDR0_PFC1 0x4101
|
|
#define SDR0_PFC1_U1ME_MASK 0x02000000 /* UART1 Mode Enable */
|
|
#define SDR0_PFC1_U1ME_DSR_DTR 0x00000000 /* UART1 in DSR/DTR Mode */
|
|
#define SDR0_PFC1_U1ME_CTS_RTS 0x02000000 /* UART1 in CTS/RTS Mode */
|
|
|
|
#define SDR0_PFC1_SELECT_MASK 0x01C00000 /* Ethernet Pin Select EMAC 0 */
|
|
#define SDR0_PFC1_SELECT_CONFIG_1_1 0x00C00000 /* 1xMII using RGMII bridge */
|
|
#define SDR0_PFC1_SELECT_CONFIG_1_2 0x00000000 /* 1xMII using ZMII bridge */
|
|
#define SDR0_PFC1_SELECT_CONFIG_2 0x00C00000 /* 1xGMII using RGMII bridge */
|
|
#define SDR0_PFC1_SELECT_CONFIG_3 0x01000000 /* 1xTBI using RGMII bridge */
|
|
#define SDR0_PFC1_SELECT_CONFIG_4 0x01400000 /* 2xRGMII using RGMII bridge */
|
|
#define SDR0_PFC1_SELECT_CONFIG_5 0x01800000 /* 2xRTBI using RGMII bridge */
|
|
#define SDR0_PFC1_SELECT_CONFIG_6 0x00800000 /* 2xSMII using ZMII bridge */
|
|
|
|
#define SDR0_PFC1_U0ME_MASK 0x00080000 /* UART0 Mode Enable */
|
|
#define SDR0_PFC1_U0ME_DSR_DTR 0x00000000 /* UART0 in DSR/DTR Mode */
|
|
#define SDR0_PFC1_U0ME_CTS_RTS 0x00080000 /* UART0 in CTS/RTS Mode */
|
|
#define SDR0_PFC1_U0IM_MASK 0x00040000 /* UART0 Interface Mode */
|
|
#define SDR0_PFC1_U0IM_8PINS 0x00000000 /* UART0 Interface Mode 8 pins */
|
|
#define SDR0_PFC1_U0IM_4PINS 0x00040000 /* UART0 Interface Mode 4 pins */
|
|
#define SDR0_PFC1_SIS_MASK 0x00020000 /* SCP or IIC1 Selection */
|
|
#define SDR0_PFC1_SIS_SCP_SEL 0x00000000 /* SCP Selected */
|
|
#define SDR0_PFC1_SIS_IIC1_SEL 0x00020000 /* IIC1 Selected */
|
|
#define SDR0_PFC1_UES_MASK 0x00010000 /* USB2D_RX_Active / EBC_Hold Req Selection */
|
|
#define SDR0_PFC1_UES_USB2D_SEL 0x00000000 /* USB2D_RX_Active Selected */
|
|
#define SDR0_PFC1_UES_EBCHR_SEL 0x00010000 /* EBC_Hold Req Selected */
|
|
#define SDR0_PFC1_DIS_MASK 0x00008000 /* DMA_Req(1) / UIC_IRQ(5) Selection */
|
|
#define SDR0_PFC1_DIS_DMAR_SEL 0x00000000 /* DMA_Req(1) Selected */
|
|
#define SDR0_PFC1_DIS_UICIRQ5_SEL 0x00008000 /* UIC_IRQ(5) Selected */
|
|
#define SDR0_PFC1_ERE_MASK 0x00004000 /* EBC Mast.Ext.Req.En./GPIO0(27) Selection */
|
|
#define SDR0_PFC1_ERE_EXTR_SEL 0x00000000 /* EBC Mast.Ext.Req.En. Selected */
|
|
#define SDR0_PFC1_ERE_GPIO0_27_SEL 0x00004000 /* GPIO0(27) Selected */
|
|
#define SDR0_PFC1_UPR_MASK 0x00002000 /* USB2 Device Packet Reject Selection */
|
|
#define SDR0_PFC1_UPR_DISABLE 0x00000000 /* USB2 Device Packet Reject Disable */
|
|
#define SDR0_PFC1_UPR_ENABLE 0x00002000 /* USB2 Device Packet Reject Enable */
|
|
|
|
#define SDR0_PFC1_PLB_PME_MASK 0x00001000 /* PLB3/PLB4 Perf. Monitor En. Selection */
|
|
#define SDR0_PFC1_PLB_PME_PLB3_SEL 0x00000000 /* PLB3 Performance Monitor Enable */
|
|
#define SDR0_PFC1_PLB_PME_PLB4_SEL 0x00001000 /* PLB3 Performance Monitor Enable */
|
|
#define SDR0_PFC1_GFGGI_MASK 0x0000000F /* GPT Frequency Generation Gated In */
|
|
|
|
/* Ethernet PLL Configuration Register */
|
|
#define SDR0_PFC2 0x4102
|
|
#define SDR0_PFC2_TUNE_MASK 0x01FF8000 /* Loop stability tuning bits */
|
|
#define SDR0_PFC2_MULTI_MASK 0x00007C00 /* Frequency multiplication selector */
|
|
#define SDR0_PFC2_RANGEB_MASK 0x00000380 /* PLLOUTB/C frequency selector */
|
|
#define SDR0_PFC2_RANGEA_MASK 0x00000071 /* PLLOUTA frequency selector */
|
|
|
|
#define SDR0_PFC2_SELECT_MASK 0xE0000000 /* Ethernet Pin select EMAC1 */
|
|
#define SDR0_PFC2_SELECT_CONFIG_1_1 0x60000000 /* 1xMII using RGMII bridge */
|
|
#define SDR0_PFC2_SELECT_CONFIG_1_2 0x00000000 /* 1xMII using ZMII bridge */
|
|
#define SDR0_PFC2_SELECT_CONFIG_2 0x60000000 /* 1xGMII using RGMII bridge */
|
|
#define SDR0_PFC2_SELECT_CONFIG_3 0x80000000 /* 1xTBI using RGMII bridge */
|
|
#define SDR0_PFC2_SELECT_CONFIG_4 0xA0000000 /* 2xRGMII using RGMII bridge */
|
|
#define SDR0_PFC2_SELECT_CONFIG_5 0xC0000000 /* 2xRTBI using RGMII bridge */
|
|
#define SDR0_PFC2_SELECT_CONFIG_6 0x40000000 /* 2xSMII using ZMII bridge */
|
|
|
|
/* USB2PHY0 Control Register */
|
|
#define SDR0_USB2PHY0CR 0x4103
|
|
#define SDR0_USB2PHY0CR_UTMICN_MASK 0x00100000 /* PHY UTMI interface connection */
|
|
#define SDR0_USB2PHY0CR_UTMICN_DEV 0x00000000 /* Device support */
|
|
#define SDR0_USB2PHY0CR_UTMICN_HOST 0x00100000 /* Host support */
|
|
|
|
#define SDR0_USB2PHY0CR_DWNSTR_MASK 0x00400000 /* Select downstream port mode */
|
|
#define SDR0_USB2PHY0CR_DWNSTR_DEV 0x00000000 /* Device */
|
|
#define SDR0_USB2PHY0CR_DWNSTR_HOST 0x00400000 /* Host */
|
|
|
|
#define SDR0_USB2PHY0CR_DVBUS_MASK 0x00800000 /* VBus detect (Device mode only) */
|
|
#define SDR0_USB2PHY0CR_DVBUS_PURDIS 0x00000000 /* Pull-up resistance on D+ is disabled */
|
|
#define SDR0_USB2PHY0CR_DVBUS_PUREN 0x00800000 /* Pull-up resistance on D+ is enabled */
|
|
|
|
#define SDR0_USB2PHY0CR_WDINT_MASK 0x01000000 /* PHY UTMI data width and clock select */
|
|
#define SDR0_USB2PHY0CR_WDINT_8BIT_60MHZ 0x00000000 /* 8-bit data/60MHz */
|
|
#define SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ 0x01000000 /* 16-bit data/30MHz */
|
|
|
|
#define SDR0_USB2PHY0CR_LOOPEN_MASK 0x02000000 /* Loop back test enable */
|
|
#define SDR0_USB2PHY0CR_LOOP_ENABLE 0x00000000 /* Loop back disabled */
|
|
#define SDR0_USB2PHY0CR_LOOP_DISABLE 0x02000000 /* Loop back enabled (only test purposes) */
|
|
|
|
#define SDR0_USB2PHY0CR_XOON_MASK 0x04000000 /* Force XO block on during a suspend */
|
|
#define SDR0_USB2PHY0CR_XO_ON 0x00000000 /* PHY XO block is powered-on */
|
|
#define SDR0_USB2PHY0CR_XO_OFF 0x04000000 /* PHY XO block is powered-off when all ports are suspended */
|
|
|
|
#define SDR0_USB2PHY0CR_PWRSAV_MASK 0x08000000 /* Select PHY power-save mode */
|
|
#define SDR0_USB2PHY0CR_PWRSAV_OFF 0x00000000 /* Non-power-save mode */
|
|
#define SDR0_USB2PHY0CR_PWRSAV_ON 0x08000000 /* Power-save mode. Valid only for full-speed operation */
|
|
|
|
#define SDR0_USB2PHY0CR_XOREF_MASK 0x10000000 /* Select reference clock source */
|
|
#define SDR0_USB2PHY0CR_XOREF_INTERNAL 0x00000000 /* PHY PLL uses chip internal 48M clock as a reference */
|
|
#define SDR0_USB2PHY0CR_XOREF_XO 0x10000000 /* PHY PLL uses internal XO block output as a reference */
|
|
|
|
#define SDR0_USB2PHY0CR_XOCLK_MASK 0x20000000 /* Select clock for XO block */
|
|
#define SDR0_USB2PHY0CR_XOCLK_EXTERNAL 0x00000000 /* PHY macro used an external clock */
|
|
#define SDR0_USB2PHY0CR_XOCLK_CRYSTAL 0x20000000 /* PHY macro uses the clock from a crystal */
|
|
|
|
#define SDR0_USB2PHY0CR_CLKSEL_MASK 0xc0000000 /* Select ref clk freq */
|
|
#define SDR0_USB2PHY0CR_CLKSEL_12MHZ 0x00000000 /* Select ref clk freq = 12 MHz*/
|
|
#define SDR0_USB2PHY0CR_CLKSEL_48MHZ 0x40000000 /* Select ref clk freq = 48 MHz*/
|
|
#define SDR0_USB2PHY0CR_CLKSEL_24MHZ 0x80000000 /* Select ref clk freq = 24 MHz*/
|
|
|
|
/* Miscealleneaous Function Reg. */
|
|
#define SDR0_MFR 0x4300
|
|
#define SDR0_MFR_ETH0_CLK_SEL_MASK 0x08000000 /* Ethernet0 Clock Select */
|
|
#define SDR0_MFR_ETH0_CLK_SEL_EXT 0x00000000
|
|
#define SDR0_MFR_ETH1_CLK_SEL_MASK 0x04000000 /* Ethernet1 Clock Select */
|
|
#define SDR0_MFR_ETH1_CLK_SEL_EXT 0x00000000
|
|
#define SDR0_MFR_ZMII_MODE_MASK 0x03000000 /* ZMII Mode Mask */
|
|
#define SDR0_MFR_ZMII_MODE_MII 0x00000000 /* ZMII Mode MII */
|
|
#define SDR0_MFR_ZMII_MODE_SMII 0x01000000 /* ZMII Mode SMII */
|
|
#define SDR0_MFR_ZMII_MODE_BIT0 0x02000000 /* ZMII Mode Bit0 */
|
|
#define SDR0_MFR_ZMII_MODE_BIT1 0x01000000 /* ZMII Mode Bit1 */
|
|
#define SDR0_MFR_ZM_ENCODE(n) ((((unsigned long)(n))&0x3)<<24)
|
|
#define SDR0_MFR_ZM_DECODE(n) ((((unsigned long)(n))<<24)&0x3)
|
|
|
|
#define SDR0_MFR_ERRATA3_EN0 0x00800000
|
|
#define SDR0_MFR_ERRATA3_EN1 0x00400000
|
|
#define SDR0_MFR_PKT_REJ_MASK 0x00180000 /* Pkt Rej. Enable Mask */
|
|
#define SDR0_MFR_PKT_REJ_EN 0x00180000 /* Pkt Rej. Enable on both EMAC3 0-1 */
|
|
#define SDR0_MFR_PKT_REJ_EN0 0x00100000 /* Pkt Rej. Enable on EMAC3(0) */
|
|
#define SDR0_MFR_PKT_REJ_EN1 0x00080000 /* Pkt Rej. Enable on EMAC3(1) */
|
|
#define SDR0_MFR_PKT_REJ_POL 0x00200000 /* Packet Reject Polarity */
|
|
|
|
#endif /* defined(CONFIG_440EPX) || defined(CONFIG_440GRX) */
|
|
|
|
/* CUST0 Customer Configuration Register0 */
|
|
#define SDR0_CUST0 0x4000
|
|
#define SDR0_CUST0_MUX_E_N_G_MASK 0xC0000000 /* Mux_Emac_NDFC_GPIO */
|
|
#define SDR0_CUST0_MUX_EMAC_SEL 0x40000000 /* Emac Selection */
|
|
#define SDR0_CUST0_MUX_NDFC_SEL 0x80000000 /* NDFC Selection */
|
|
#define SDR0_CUST0_MUX_GPIO_SEL 0xC0000000 /* GPIO Selection */
|
|
|
|
#define SDR0_CUST0_NDFC_EN_MASK 0x20000000 /* NDFC Enable Mask */
|
|
#define SDR0_CUST0_NDFC_ENABLE 0x20000000 /* NDFC Enable */
|
|
#define SDR0_CUST0_NDFC_DISABLE 0x00000000 /* NDFC Disable */
|
|
|
|
#define SDR0_CUST0_NDFC_BW_MASK 0x10000000 /* NDFC Boot Width */
|
|
#define SDR0_CUST0_NDFC_BW_16_BIT 0x10000000 /* NDFC Boot Width = 16 Bit */
|
|
#define SDR0_CUST0_NDFC_BW_8_BIT 0x00000000 /* NDFC Boot Width = 8 Bit */
|
|
|
|
#define SDR0_CUST0_NDFC_BP_MASK 0x0F000000 /* NDFC Boot Page */
|
|
#define SDR0_CUST0_NDFC_BP_ENCODE(n) ((((unsigned long)(n))&0xF)<<24)
|
|
#define SDR0_CUST0_NDFC_BP_DECODE(n) ((((unsigned long)(n))>>24)&0x0F)
|
|
|
|
#define SDR0_CUST0_NDFC_BAC_MASK 0x00C00000 /* NDFC Boot Address Cycle */
|
|
#define SDR0_CUST0_NDFC_BAC_ENCODE(n) ((((unsigned long)(n))&0x3)<<22)
|
|
#define SDR0_CUST0_NDFC_BAC_DECODE(n) ((((unsigned long)(n))>>22)&0x03)
|
|
|
|
#define SDR0_CUST0_NDFC_ARE_MASK 0x00200000 /* NDFC Auto Read Enable */
|
|
#define SDR0_CUST0_NDFC_ARE_ENABLE 0x00200000 /* NDFC Auto Read Enable */
|
|
#define SDR0_CUST0_NDFC_ARE_DISABLE 0x00000000 /* NDFC Auto Read Disable */
|
|
|
|
#define SDR0_CUST0_NRB_MASK 0x00100000 /* NDFC Ready / Busy */
|
|
#define SDR0_CUST0_NRB_BUSY 0x00100000 /* Busy */
|
|
#define SDR0_CUST0_NRB_READY 0x00000000 /* Ready */
|
|
|
|
#define SDR0_CUST0_NDRSC_MASK 0x0000FFF0 /* NDFC Device Reset Count Mask */
|
|
#define SDR0_CUST0_NDRSC_ENCODE(n) ((((unsigned long)(n))&0xFFF)<<4)
|
|
#define SDR0_CUST0_NDRSC_DECODE(n) ((((unsigned long)(n))>>4)&0xFFF)
|
|
|
|
#define SDR0_CUST0_CHIPSELGAT_MASK 0x0000000F /* Chip Select Gating Mask */
|
|
#define SDR0_CUST0_CHIPSELGAT_DIS 0x00000000 /* Chip Select Gating Disable */
|
|
#define SDR0_CUST0_CHIPSELGAT_ENALL 0x0000000F /* All Chip Select Gating Enable */
|
|
#define SDR0_CUST0_CHIPSELGAT_EN0 0x00000008 /* Chip Select0 Gating Enable */
|
|
#define SDR0_CUST0_CHIPSELGAT_EN1 0x00000004 /* Chip Select1 Gating Enable */
|
|
#define SDR0_CUST0_CHIPSELGAT_EN2 0x00000002 /* Chip Select2 Gating Enable */
|
|
#define SDR0_CUST0_CHIPSELGAT_EN3 0x00000001 /* Chip Select3 Gating Enable */
|
|
|
|
/* CUST1 Customer Configuration Register1 */
|
|
#define SDR0_CUST1 0x4002
|
|
#define SDR0_CUST1_NDRSC_MASK 0xFFFF0000 /* NDRSC Device Read Count */
|
|
#define SDR0_CUST1_NDRSC_ENCODE(n) ((((unsigned long)(n))&0xFFFF)<<16)
|
|
#define SDR0_CUST1_NDRSC_DECODE(n) ((((unsigned long)(n))>>16)&0xFFFF)
|
|
|
|
/* Pin Function Control Register 0 */
|
|
#define SDR0_PFC0 0x4100
|
|
#define SDR0_PFC0_CPU_TR_EN_MASK 0x00000100 /* CPU Trace Enable Mask */
|
|
#define SDR0_PFC0_CPU_TRACE_EN 0x00000100 /* CPU Trace Enable */
|
|
#define SDR0_PFC0_CPU_TRACE_DIS 0x00000100 /* CPU Trace Disable */
|
|
#define SDR0_PFC0_CTE_ENCODE(n) ((((unsigned long)(n))&0x01)<<8)
|
|
#define SDR0_PFC0_CTE_DECODE(n) ((((unsigned long)(n))>>8)&0x01)
|
|
|
|
/* Pin Function Control Register 1 */
|
|
#define SDR0_PFC1 0x4101
|
|
#define SDR0_PFC1_U1ME_MASK 0x02000000 /* UART1 Mode Enable */
|
|
#define SDR0_PFC1_U1ME_DSR_DTR 0x00000000 /* UART1 in DSR/DTR Mode */
|
|
#define SDR0_PFC1_U1ME_CTS_RTS 0x02000000 /* UART1 in CTS/RTS Mode */
|
|
#define SDR0_PFC1_U0ME_MASK 0x00080000 /* UART0 Mode Enable */
|
|
#define SDR0_PFC1_U0ME_DSR_DTR 0x00000000 /* UART0 in DSR/DTR Mode */
|
|
#define SDR0_PFC1_U0ME_CTS_RTS 0x00080000 /* UART0 in CTS/RTS Mode */
|
|
#define SDR0_PFC1_U0IM_MASK 0x00040000 /* UART0 Interface Mode */
|
|
#define SDR0_PFC1_U0IM_8PINS 0x00000000 /* UART0 Interface Mode 8 pins */
|
|
#define SDR0_PFC1_U0IM_4PINS 0x00040000 /* UART0 Interface Mode 4 pins */
|
|
#define SDR0_PFC1_SIS_MASK 0x00020000 /* SCP or IIC1 Selection */
|
|
#define SDR0_PFC1_SIS_SCP_SEL 0x00000000 /* SCP Selected */
|
|
#define SDR0_PFC1_SIS_IIC1_SEL 0x00020000 /* IIC1 Selected */
|
|
#define SDR0_PFC1_UES_MASK 0x00010000 /* USB2D_RX_Active / EBC_Hold Req Selection */
|
|
#define SDR0_PFC1_UES_USB2D_SEL 0x00000000 /* USB2D_RX_Active Selected */
|
|
#define SDR0_PFC1_UES_EBCHR_SEL 0x00010000 /* EBC_Hold Req Selected */
|
|
#define SDR0_PFC1_DIS_MASK 0x00008000 /* DMA_Req(1) / UIC_IRQ(5) Selection */
|
|
#define SDR0_PFC1_DIS_DMAR_SEL 0x00000000 /* DMA_Req(1) Selected */
|
|
#define SDR0_PFC1_DIS_UICIRQ5_SEL 0x00008000 /* UIC_IRQ(5) Selected */
|
|
#define SDR0_PFC1_ERE_MASK 0x00004000 /* EBC Mast.Ext.Req.En./GPIO0(27) Selection */
|
|
#define SDR0_PFC1_ERE_EXTR_SEL 0x00000000 /* EBC Mast.Ext.Req.En. Selected */
|
|
#define SDR0_PFC1_ERE_GPIO0_27_SEL 0x00004000 /* GPIO0(27) Selected */
|
|
#define SDR0_PFC1_UPR_MASK 0x00002000 /* USB2 Device Packet Reject Selection */
|
|
#define SDR0_PFC1_UPR_DISABLE 0x00000000 /* USB2 Device Packet Reject Disable */
|
|
#define SDR0_PFC1_UPR_ENABLE 0x00002000 /* USB2 Device Packet Reject Enable */
|
|
|
|
#define SDR0_PFC1_PLB_PME_MASK 0x00001000 /* PLB3/PLB4 Perf. Monitor En. Selection */
|
|
#define SDR0_PFC1_PLB_PME_PLB3_SEL 0x00000000 /* PLB3 Performance Monitor Enable */
|
|
#define SDR0_PFC1_PLB_PME_PLB4_SEL 0x00001000 /* PLB3 Performance Monitor Enable */
|
|
#define SDR0_PFC1_GFGGI_MASK 0x0000000F /* GPT Frequency Generation Gated In */
|
|
|
|
/*-----------------------------------------------------------------------------
|
|
| Internal SRAM
|
|
+----------------------------------------------------------------------------*/
|
|
#define ISRAM0_DCR_BASE 0x380
|
|
#define isram0_sb0cr (ISRAM0_DCR_BASE+0x00) /* SRAM bank config 0*/
|
|
#define isram0_bear (ISRAM0_DCR_BASE+0x04) /* SRAM bus error addr reg */
|
|
#define isram0_besr0 (ISRAM0_DCR_BASE+0x05) /* SRAM bus error status reg 0 */
|
|
#define isram0_besr1 (ISRAM0_DCR_BASE+0x06) /* SRAM bus error status reg 1 */
|
|
#define isram0_pmeg (ISRAM0_DCR_BASE+0x07) /* SRAM power management */
|
|
#define isram0_cid (ISRAM0_DCR_BASE+0x08) /* SRAM bus core id reg */
|
|
#define isram0_revid (ISRAM0_DCR_BASE+0x09) /* SRAM bus revision id reg */
|
|
#define isram0_dpc (ISRAM0_DCR_BASE+0x0a) /* SRAM data parity check reg */
|
|
|
|
#else
|
|
|
|
/*-----------------------------------------------------------------------------
|
|
| Internal SRAM
|
|
+----------------------------------------------------------------------------*/
|
|
#define ISRAM0_DCR_BASE 0x020
|
|
#define isram0_sb0cr (ISRAM0_DCR_BASE+0x00) /* SRAM bank config 0*/
|
|
#define isram0_sb1cr (ISRAM0_DCR_BASE+0x01) /* SRAM bank config 1*/
|
|
#define isram0_sb2cr (ISRAM0_DCR_BASE+0x02) /* SRAM bank config 2*/
|
|
#define isram0_sb3cr (ISRAM0_DCR_BASE+0x03) /* SRAM bank config 3*/
|
|
#define isram0_bear (ISRAM0_DCR_BASE+0x04) /* SRAM bus error addr reg */
|
|
#define isram0_besr0 (ISRAM0_DCR_BASE+0x05) /* SRAM bus error status reg 0 */
|
|
#define isram0_besr1 (ISRAM0_DCR_BASE+0x06) /* SRAM bus error status reg 1 */
|
|
#define isram0_pmeg (ISRAM0_DCR_BASE+0x07) /* SRAM power management */
|
|
#define isram0_cid (ISRAM0_DCR_BASE+0x08) /* SRAM bus core id reg */
|
|
#define isram0_revid (ISRAM0_DCR_BASE+0x09) /* SRAM bus revision id reg */
|
|
#define isram0_dpc (ISRAM0_DCR_BASE+0x0a) /* SRAM data parity check reg */
|
|
|
|
/*-----------------------------------------------------------------------------
|
|
| L2 Cache
|
|
+----------------------------------------------------------------------------*/
|
|
#if defined (CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
|
|
#define L2_CACHE_BASE 0x030
|
|
#define l2_cache_cfg (L2_CACHE_BASE+0x00) /* L2 Cache Config */
|
|
#define l2_cache_cmd (L2_CACHE_BASE+0x01) /* L2 Cache Command */
|
|
#define l2_cache_addr (L2_CACHE_BASE+0x02) /* L2 Cache Address */
|
|
#define l2_cache_data (L2_CACHE_BASE+0x03) /* L2 Cache Data */
|
|
#define l2_cache_stat (L2_CACHE_BASE+0x04) /* L2 Cache Status */
|
|
#define l2_cache_cver (L2_CACHE_BASE+0x05) /* L2 Cache Revision ID */
|
|
#define l2_cache_snp0 (L2_CACHE_BASE+0x06) /* L2 Cache Snoop reg 0 */
|
|
#define l2_cache_snp1 (L2_CACHE_BASE+0x07) /* L2 Cache Snoop reg 1 */
|
|
|
|
#endif /* CONFIG_440GX */
|
|
#endif /* !CONFIG_440EP !CONFIG_440GR*/
|
|
|
|
/*-----------------------------------------------------------------------------
|
|
| On-Chip Buses
|
|
+----------------------------------------------------------------------------*/
|
|
/* TODO: as needed */
|
|
|
|
/*-----------------------------------------------------------------------------
|
|
| Clocking, Power Management and Chip Control
|
|
+----------------------------------------------------------------------------*/
|
|
#define CNTRL_DCR_BASE 0x0b0
|
|
#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
|
|
#define cpc0_er (CNTRL_DCR_BASE+0x00) /* CPM enable register */
|
|
#define cpc0_fr (CNTRL_DCR_BASE+0x01) /* CPM force register */
|
|
#define cpc0_sr (CNTRL_DCR_BASE+0x02) /* CPM status register */
|
|
#else
|
|
#define cpc0_sr (CNTRL_DCR_BASE+0x00) /* CPM status register */
|
|
#define cpc0_er (CNTRL_DCR_BASE+0x01) /* CPM enable register */
|
|
#define cpc0_fr (CNTRL_DCR_BASE+0x02) /* CPM force register */
|
|
#endif
|
|
|
|
#define cpc0_sys0 (CNTRL_DCR_BASE+0x30) /* System configuration reg 0 */
|
|
#define cpc0_sys1 (CNTRL_DCR_BASE+0x31) /* System configuration reg 1 */
|
|
#define cpc0_cust0 (CNTRL_DCR_BASE+0x32) /* Customer configuration reg 0 */
|
|
#define cpc0_cust1 (CNTRL_DCR_BASE+0x33) /* Customer configuration reg 1 */
|
|
|
|
#define cpc0_strp0 (CNTRL_DCR_BASE+0x34) /* Power-on config reg 0 (RO) */
|
|
#define cpc0_strp1 (CNTRL_DCR_BASE+0x35) /* Power-on config reg 1 (RO) */
|
|
#define cpc0_strp2 (CNTRL_DCR_BASE+0x36) /* Power-on config reg 2 (RO) */
|
|
#define cpc0_strp3 (CNTRL_DCR_BASE+0x37) /* Power-on config reg 3 (RO) */
|
|
|
|
#define cpc0_gpio (CNTRL_DCR_BASE+0x38) /* GPIO config reg (440GP) */
|
|
|
|
#define cntrl0 (CNTRL_DCR_BASE+0x3b) /* Control 0 register */
|
|
#define cntrl1 (CNTRL_DCR_BASE+0x3a) /* Control 1 register */
|
|
|
|
/*-----------------------------------------------------------------------------
|
|
| Universal interrupt controller
|
|
+----------------------------------------------------------------------------*/
|
|
#define UIC0_DCR_BASE 0xc0
|
|
#define uic0sr (UIC0_DCR_BASE+0x0) /* UIC0 status */
|
|
#define uic0er (UIC0_DCR_BASE+0x2) /* UIC0 enable */
|
|
#define uic0cr (UIC0_DCR_BASE+0x3) /* UIC0 critical */
|
|
#define uic0pr (UIC0_DCR_BASE+0x4) /* UIC0 polarity */
|
|
#define uic0tr (UIC0_DCR_BASE+0x5) /* UIC0 triggering */
|
|
#define uic0msr (UIC0_DCR_BASE+0x6) /* UIC0 masked status */
|
|
#define uic0vr (UIC0_DCR_BASE+0x7) /* UIC0 vector */
|
|
#define uic0vcr (UIC0_DCR_BASE+0x8) /* UIC0 vector configuration */
|
|
|
|
#define UIC1_DCR_BASE 0xd0
|
|
#define uic1sr (UIC1_DCR_BASE+0x0) /* UIC1 status */
|
|
#define uic1er (UIC1_DCR_BASE+0x2) /* UIC1 enable */
|
|
#define uic1cr (UIC1_DCR_BASE+0x3) /* UIC1 critical */
|
|
#define uic1pr (UIC1_DCR_BASE+0x4) /* UIC1 polarity */
|
|
#define uic1tr (UIC1_DCR_BASE+0x5) /* UIC1 triggering */
|
|
#define uic1msr (UIC1_DCR_BASE+0x6) /* UIC1 masked status */
|
|
#define uic1vr (UIC1_DCR_BASE+0x7) /* UIC1 vector */
|
|
#define uic1vcr (UIC1_DCR_BASE+0x8) /* UIC1 vector configuration */
|
|
|
|
#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
|
|
#define UIC2_DCR_BASE 0xe0
|
|
#define uic2sr (UIC2_DCR_BASE+0x0) /* UIC2 status-Read Clear */
|
|
#define uic2srs (UIC2_DCR_BASE+0x1) /* UIC2 status-Read Set */
|
|
#define uic2er (UIC2_DCR_BASE+0x2) /* UIC2 enable */
|
|
#define uic2cr (UIC2_DCR_BASE+0x3) /* UIC2 critical */
|
|
#define uic2pr (UIC2_DCR_BASE+0x4) /* UIC2 polarity */
|
|
#define uic2tr (UIC2_DCR_BASE+0x5) /* UIC2 triggering */
|
|
#define uic2msr (UIC2_DCR_BASE+0x6) /* UIC2 masked status */
|
|
#define uic2vr (UIC2_DCR_BASE+0x7) /* UIC2 vector */
|
|
#define uic2vcr (UIC2_DCR_BASE+0x8) /* UIC2 vector configuration */
|
|
|
|
#define UIC3_DCR_BASE 0xf0
|
|
#define uic3sr (UIC3_DCR_BASE+0x0) /* UIC3 status-Read Clear */
|
|
#define uic3srs (UIC3_DCR_BASE+0x1) /* UIC3 status-Read Set */
|
|
#define uic3er (UIC3_DCR_BASE+0x2) /* UIC3 enable */
|
|
#define uic3cr (UIC3_DCR_BASE+0x3) /* UIC3 critical */
|
|
#define uic3pr (UIC3_DCR_BASE+0x4) /* UIC3 polarity */
|
|
#define uic3tr (UIC3_DCR_BASE+0x5) /* UIC3 triggering */
|
|
#define uic3msr (UIC3_DCR_BASE+0x6) /* UIC3 masked status */
|
|
#define uic3vr (UIC3_DCR_BASE+0x7) /* UIC3 vector */
|
|
#define uic3vcr (UIC3_DCR_BASE+0x8) /* UIC3 vector configuration */
|
|
#endif /* CONFIG_440SPE */
|
|
|
|
#if defined(CONFIG_440GX)
|
|
#define UIC2_DCR_BASE 0x210
|
|
#define uic2sr (UIC2_DCR_BASE+0x0) /* UIC2 status */
|
|
#define uic2er (UIC2_DCR_BASE+0x2) /* UIC2 enable */
|
|
#define uic2cr (UIC2_DCR_BASE+0x3) /* UIC2 critical */
|
|
#define uic2pr (UIC2_DCR_BASE+0x4) /* UIC2 polarity */
|
|
#define uic2tr (UIC2_DCR_BASE+0x5) /* UIC2 triggering */
|
|
#define uic2msr (UIC2_DCR_BASE+0x6) /* UIC2 masked status */
|
|
#define uic2vr (UIC2_DCR_BASE+0x7) /* UIC2 vector */
|
|
#define uic2vcr (UIC2_DCR_BASE+0x8) /* UIC2 vector configuration */
|
|
|
|
|
|
#define UIC_DCR_BASE 0x200
|
|
#define uicb0sr (UIC_DCR_BASE+0x0) /* UIC Base Status Register */
|
|
#define uicb0er (UIC_DCR_BASE+0x2) /* UIC Base enable */
|
|
#define uicb0cr (UIC_DCR_BASE+0x3) /* UIC Base critical */
|
|
#define uicb0pr (UIC_DCR_BASE+0x4) /* UIC Base polarity */
|
|
#define uicb0tr (UIC_DCR_BASE+0x5) /* UIC Base triggering */
|
|
#define uicb0msr (UIC_DCR_BASE+0x6) /* UIC Base masked status */
|
|
#define uicb0vr (UIC_DCR_BASE+0x7) /* UIC Base vector */
|
|
#define uicb0vcr (UIC_DCR_BASE+0x8) /* UIC Base vector configuration */
|
|
#endif /* CONFIG_440GX */
|
|
|
|
/* The following is for compatibility with 405 code */
|
|
#define uicsr uic0sr
|
|
#define uicer uic0er
|
|
#define uiccr uic0cr
|
|
#define uicpr uic0pr
|
|
#define uictr uic0tr
|
|
#define uicmsr uic0msr
|
|
#define uicvr uic0vr
|
|
#define uicvcr uic0vcr
|
|
|
|
#if defined(CONFIG_440SPE)
|
|
/*----------------------------------------------------------------------------+
|
|
| Clock / Power-on-reset DCR's.
|
|
+----------------------------------------------------------------------------*/
|
|
#define CPR0_CFGADDR 0x00C
|
|
#define CPR0_CFGDATA 0x00D
|
|
|
|
#define CPR0_CLKUPD 0x20
|
|
#define CPR0_CLKUPD_BSY_MASK 0x80000000
|
|
#define CPR0_CLKUPD_BSY_COMPLETED 0x00000000
|
|
#define CPR0_CLKUPD_BSY_BUSY 0x80000000
|
|
#define CPR0_CLKUPD_CUI_MASK 0x80000000
|
|
#define CPR0_CLKUPD_CUI_DISABLE 0x00000000
|
|
#define CPR0_CLKUPD_CUI_ENABLE 0x80000000
|
|
#define CPR0_CLKUPD_CUD_MASK 0x40000000
|
|
#define CPR0_CLKUPD_CUD_DISABLE 0x00000000
|
|
#define CPR0_CLKUPD_CUD_ENABLE 0x40000000
|
|
|
|
#define CPR0_PLLC 0x40
|
|
#define CPR0_PLLC_RST_MASK 0x80000000
|
|
#define CPR0_PLLC_RST_PLLLOCKED 0x00000000
|
|
#define CPR0_PLLC_RST_PLLRESET 0x80000000
|
|
#define CPR0_PLLC_ENG_MASK 0x40000000
|
|
#define CPR0_PLLC_ENG_DISABLE 0x00000000
|
|
#define CPR0_PLLC_ENG_ENABLE 0x40000000
|
|
#define CPR0_PLLC_ENG_ENCODE(n) ((((unsigned long)(n))&0x01)<<30)
|
|
#define CPR0_PLLC_ENG_DECODE(n) ((((unsigned long)(n))>>30)&0x01)
|
|
#define CPR0_PLLC_SRC_MASK 0x20000000
|
|
#define CPR0_PLLC_SRC_PLLOUTA 0x00000000
|
|
#define CPR0_PLLC_SRC_PLLOUTB 0x20000000
|
|
#define CPR0_PLLC_SRC_ENCODE(n) ((((unsigned long)(n))&0x01)<<29)
|
|
#define CPR0_PLLC_SRC_DECODE(n) ((((unsigned long)(n))>>29)&0x01)
|
|
#define CPR0_PLLC_SEL_MASK 0x07000000
|
|
#define CPR0_PLLC_SEL_PLLOUT 0x00000000
|
|
#define CPR0_PLLC_SEL_CPU 0x01000000
|
|
#define CPR0_PLLC_SEL_EBC 0x05000000
|
|
#define CPR0_PLLC_SEL_ENCODE(n) ((((unsigned long)(n))&0x07)<<24)
|
|
#define CPR0_PLLC_SEL_DECODE(n) ((((unsigned long)(n))>>24)&0x07)
|
|
#define CPR0_PLLC_TUNE_MASK 0x000003FF
|
|
#define CPR0_PLLC_TUNE_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<0)
|
|
#define CPR0_PLLC_TUNE_DECODE(n) ((((unsigned long)(n))>>0)&0x3FF)
|
|
|
|
#define CPR0_PLLD 0x60
|
|
#define CPR0_PLLD_FBDV_MASK 0x1F000000
|
|
#define CPR0_PLLD_FBDV_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24)
|
|
#define CPR0_PLLD_FBDV_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x1F)+1)
|
|
#define CPR0_PLLD_FWDVA_MASK 0x000F0000
|
|
#define CPR0_PLLD_FWDVA_ENCODE(n) ((((unsigned long)(n))&0x0F)<<16)
|
|
#define CPR0_PLLD_FWDVA_DECODE(n) ((((((unsigned long)(n))>>16)-1)&0x0F)+1)
|
|
#define CPR0_PLLD_FWDVB_MASK 0x00000700
|
|
#define CPR0_PLLD_FWDVB_ENCODE(n) ((((unsigned long)(n))&0x07)<<8)
|
|
#define CPR0_PLLD_FWDVB_DECODE(n) ((((((unsigned long)(n))>>8)-1)&0x07)+1)
|
|
#define CPR0_PLLD_LFBDV_MASK 0x0000003F
|
|
#define CPR0_PLLD_LFBDV_ENCODE(n) ((((unsigned long)(n))&0x3F)<<0)
|
|
#define CPR0_PLLD_LFBDV_DECODE(n) ((((((unsigned long)(n))>>0)-1)&0x3F)+1)
|
|
|
|
#define CPR0_PRIMAD 0x80
|
|
#define CPR0_PRIMAD_PRADV0_MASK 0x07000000
|
|
#define CPR0_PRIMAD_PRADV0_ENCODE(n) ((((unsigned long)(n))&0x07)<<24)
|
|
#define CPR0_PRIMAD_PRADV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x07)+1)
|
|
|
|
#define CPR0_PRIMBD 0xA0
|
|
#define CPR0_PRIMBD_PRBDV0_MASK 0x07000000
|
|
#define CPR0_PRIMBD_PRBDV0_ENCODE(n) ((((unsigned long)(n))&0x07)<<24)
|
|
#define CPR0_PRIMBD_PRBDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x07)+1)
|
|
|
|
#define CPR0_OPBD 0xC0
|
|
#define CPR0_OPBD_OPBDV0_MASK 0x03000000
|
|
#define CPR0_OPBD_OPBDV0_ENCODE(n) ((((unsigned long)(n))&0x03)<<24)
|
|
#define CPR0_OPBD_OPBDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x03)+1)
|
|
|
|
#define CPR0_PERD 0xE0
|
|
#define CPR0_PERD_PERDV0_MASK 0x03000000
|
|
#define CPR0_PERD_PERDV0_ENCODE(n) ((((unsigned long)(n))&0x03)<<24)
|
|
#define CPR0_PERD_PERDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x03)+1)
|
|
|
|
#define CPR0_MALD 0x100
|
|
#define CPR0_MALD_MALDV0_MASK 0x03000000
|
|
#define CPR0_MALD_MALDV0_ENCODE(n) ((((unsigned long)(n))&0x03)<<24)
|
|
#define CPR0_MALD_MALDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x03)+1)
|
|
|
|
#define CPR0_ICFG 0x140
|
|
#define CPR0_ICFG_RLI_MASK 0x80000000
|
|
#define CPR0_ICFG_RLI_RESETCPR 0x00000000
|
|
#define CPR0_ICFG_RLI_PRESERVECPR 0x80000000
|
|
#define CPR0_ICFG_ICS_MASK 0x00000007
|
|
#define CPR0_ICFG_ICS_ENCODE(n) ((((unsigned long)(n))&0x3F)<<0)
|
|
#define CPR0_ICFG_ICS_DECODE(n) ((((((unsigned long)(n))>>0)-1)&0x3F)+1)
|
|
|
|
/************************/
|
|
/* IIC defines */
|
|
/************************/
|
|
#define IIC0_MMIO_BASE 0xA0000400
|
|
#define IIC1_MMIO_BASE 0xA0000500
|
|
|
|
#endif /* CONFIG_440SP */
|
|
|
|
/*-----------------------------------------------------------------------------
|
|
| DMA
|
|
+----------------------------------------------------------------------------*/
|
|
#define DMA_DCR_BASE 0x100
|
|
#define dmacr0 (DMA_DCR_BASE+0x00) /* DMA channel control register 0 */
|
|
#define dmact0 (DMA_DCR_BASE+0x01) /* DMA count register 0 */
|
|
#define dmasah0 (DMA_DCR_BASE+0x02) /* DMA source address high 0 */
|
|
#define dmasal0 (DMA_DCR_BASE+0x03) /* DMA source address low 0 */
|
|
#define dmadah0 (DMA_DCR_BASE+0x04) /* DMA destination address high 0 */
|
|
#define dmadal0 (DMA_DCR_BASE+0x05) /* DMA destination address low 0 */
|
|
#define dmasgh0 (DMA_DCR_BASE+0x06) /* DMA scatter/gather desc addr high 0 */
|
|
#define dmasgl0 (DMA_DCR_BASE+0x07) /* DMA scatter/gather desc addr low 0 */
|
|
#define dmacr1 (DMA_DCR_BASE+0x08) /* DMA channel control register 1 */
|
|
#define dmact1 (DMA_DCR_BASE+0x09) /* DMA count register 1 */
|
|
#define dmasah1 (DMA_DCR_BASE+0x0a) /* DMA source address high 1 */
|
|
#define dmasal1 (DMA_DCR_BASE+0x0b) /* DMA source address low 1 */
|
|
#define dmadah1 (DMA_DCR_BASE+0x0c) /* DMA destination address high 1 */
|
|
#define dmadal1 (DMA_DCR_BASE+0x0d) /* DMA destination address low 1 */
|
|
#define dmasgh1 (DMA_DCR_BASE+0x0e) /* DMA scatter/gather desc addr high 1 */
|
|
#define dmasgl1 (DMA_DCR_BASE+0x0f) /* DMA scatter/gather desc addr low 1 */
|
|
#define dmacr2 (DMA_DCR_BASE+0x10) /* DMA channel control register 2 */
|
|
#define dmact2 (DMA_DCR_BASE+0x11) /* DMA count register 2 */
|
|
#define dmasah2 (DMA_DCR_BASE+0x12) /* DMA source address high 2 */
|
|
#define dmasal2 (DMA_DCR_BASE+0x13) /* DMA source address low 2 */
|
|
#define dmadah2 (DMA_DCR_BASE+0x14) /* DMA destination address high 2 */
|
|
#define dmadal2 (DMA_DCR_BASE+0x15) /* DMA destination address low 2 */
|
|
#define dmasgh2 (DMA_DCR_BASE+0x16) /* DMA scatter/gather desc addr high 2 */
|
|
#define dmasgl2 (DMA_DCR_BASE+0x17) /* DMA scatter/gather desc addr low 2 */
|
|
#define dmacr3 (DMA_DCR_BASE+0x18) /* DMA channel control register 2 */
|
|
#define dmact3 (DMA_DCR_BASE+0x19) /* DMA count register 2 */
|
|
#define dmasah3 (DMA_DCR_BASE+0x1a) /* DMA source address high 2 */
|
|
#define dmasal3 (DMA_DCR_BASE+0x1b) /* DMA source address low 2 */
|
|
#define dmadah3 (DMA_DCR_BASE+0x1c) /* DMA destination address high 2 */
|
|
#define dmadal3 (DMA_DCR_BASE+0x1d) /* DMA destination address low 2 */
|
|
#define dmasgh3 (DMA_DCR_BASE+0x1e) /* DMA scatter/gather desc addr high 2 */
|
|
#define dmasgl3 (DMA_DCR_BASE+0x1f) /* DMA scatter/gather desc addr low 2 */
|
|
#define dmasr (DMA_DCR_BASE+0x20) /* DMA status register */
|
|
#define dmasgc (DMA_DCR_BASE+0x23) /* DMA scatter/gather command register */
|
|
#define dmaslp (DMA_DCR_BASE+0x25) /* DMA sleep mode register */
|
|
#define dmapol (DMA_DCR_BASE+0x26) /* DMA polarity configuration register */
|
|
|
|
/*-----------------------------------------------------------------------------
|
|
| Memory Access Layer
|
|
+----------------------------------------------------------------------------*/
|
|
#define MAL_DCR_BASE 0x180
|
|
#define malmcr (MAL_DCR_BASE+0x00) /* MAL Config reg */
|
|
#define malesr (MAL_DCR_BASE+0x01) /* Error Status reg (Read/Clear) */
|
|
#define malier (MAL_DCR_BASE+0x02) /* Interrupt enable reg */
|
|
#define maldbr (MAL_DCR_BASE+0x03) /* Mal Debug reg (Read only) */
|
|
#define maltxcasr (MAL_DCR_BASE+0x04) /* TX Channel active reg (set) */
|
|
#define maltxcarr (MAL_DCR_BASE+0x05) /* TX Channel active reg (Reset) */
|
|
#define maltxeobisr (MAL_DCR_BASE+0x06) /* TX End of buffer int status reg */
|
|
#define maltxdeir (MAL_DCR_BASE+0x07) /* TX Descr. Error Int reg */
|
|
#define maltxtattrr (MAL_DCR_BASE+0x08) /* TX PLB attribute reg */
|
|
#define maltxbattr (MAL_DCR_BASE+0x09) /* TX descriptor base addr reg */
|
|
#define malrxcasr (MAL_DCR_BASE+0x10) /* RX Channel active reg (set) */
|
|
#define malrxcarr (MAL_DCR_BASE+0x11) /* RX Channel active reg (Reset) */
|
|
#define malrxeobisr (MAL_DCR_BASE+0x12) /* RX End of buffer int status reg */
|
|
#define malrxdeir (MAL_DCR_BASE+0x13) /* RX Descr. Error Int reg */
|
|
#define malrxtattrr (MAL_DCR_BASE+0x14) /* RX PLB attribute reg */
|
|
#define malrxbattr (MAL_DCR_BASE+0x15) /* RX descriptor base addr reg */
|
|
#define maltxctp0r (MAL_DCR_BASE+0x20) /* TX 0 Channel table pointer reg */
|
|
#define maltxctp1r (MAL_DCR_BASE+0x21) /* TX 1 Channel table pointer reg */
|
|
#define maltxctp2r (MAL_DCR_BASE+0x22) /* TX 2 Channel table pointer reg */
|
|
#define maltxctp3r (MAL_DCR_BASE+0x23) /* TX 3 Channel table pointer reg */
|
|
#define malrxctp0r (MAL_DCR_BASE+0x40) /* RX 0 Channel table pointer reg */
|
|
#define malrxctp1r (MAL_DCR_BASE+0x41) /* RX 1 Channel table pointer reg */
|
|
#if defined(CONFIG_440GX)
|
|
#define malrxctp2r (MAL_DCR_BASE+0x42) /* RX 2 Channel table pointer reg */
|
|
#define malrxctp3r (MAL_DCR_BASE+0x43) /* RX 3 Channel table pointer reg */
|
|
#endif /* CONFIG_440GX */
|
|
#define malrcbs0 (MAL_DCR_BASE+0x60) /* RX 0 Channel buffer size reg */
|
|
#define malrcbs1 (MAL_DCR_BASE+0x61) /* RX 1 Channel buffer size reg */
|
|
#if defined(CONFIG_440GX)
|
|
#define malrcbs2 (MAL_DCR_BASE+0x62) /* RX 2 Channel buffer size reg */
|
|
#define malrcbs3 (MAL_DCR_BASE+0x63) /* RX 3 Channel buffer size reg */
|
|
#endif /* CONFIG_440GX */
|
|
|
|
|
|
/*---------------------------------------------------------------------------+
|
|
| Universal interrupt controller 0 interrupts (UIC0)
|
|
+---------------------------------------------------------------------------*/
|
|
#if defined(CONFIG_440SP)
|
|
#define UIC_U0 0x80000000 /* UART 0 */
|
|
#define UIC_U1 0x40000000 /* UART 1 */
|
|
#define UIC_IIC0 0x20000000 /* IIC */
|
|
#define UIC_IIC1 0x10000000 /* IIC */
|
|
#define UIC_PIM 0x08000000 /* PCI0 inbound message */
|
|
#define UIC_PCRW 0x04000000 /* PCI0 command write register */
|
|
#define UIC_PPM 0x02000000 /* PCI0 power management */
|
|
#define UIC_PVPD 0x01000000 /* PCI0 VPD Access */
|
|
#define UIC_MSI0 0x00800000 /* PCI0 MSI level 0 */
|
|
#define UIC_P1IM 0x00400000 /* PCI1 Inbound Message */
|
|
#define UIC_P1CRW 0x00200000 /* PCI1 command write register */
|
|
#define UIC_P1PM 0x00100000 /* PCI1 power management */
|
|
#define UIC_P1VPD 0x00080000 /* PCI1 VPD Access */
|
|
#define UIC_P1MSI0 0x00040000 /* PCI1 MSI level 0 */
|
|
#define UIC_P2IM 0x00020000 /* PCI2 inbound message */
|
|
#define UIC_P2CRW 0x00010000 /* PCI2 command register write */
|
|
#define UIC_P2PM 0x00008000 /* PCI2 power management */
|
|
#define UIC_P2VPD 0x00004000 /* PCI2 VPD access */
|
|
#define UIC_P2MSI0 0x00002000 /* PCI2 MSI level 0 */
|
|
#define UIC_D0CPF 0x00001000 /* DMA0 command pointer */
|
|
#define UIC_D0CSF 0x00000800 /* DMA0 command status */
|
|
#define UIC_D1CPF 0x00000400 /* DMA1 command pointer */
|
|
#define UIC_D1CSF 0x00000200 /* DMA1 command status */
|
|
#define UIC_I2OID 0x00000100 /* I2O inbound doorbell */
|
|
#define UIC_I2OPLF 0x00000080 /* I2O inbound post list */
|
|
#define UIC_I2O0LL 0x00000040 /* I2O0 low latency PLB write */
|
|
#define UIC_I2O1LL 0x00000020 /* I2O1 low latency PLB write */
|
|
#define UIC_I2O0HB 0x00000010 /* I2O0 high bandwidth PLB write */
|
|
#define UIC_I2O1HB 0x00000008 /* I2O1 high bandwidth PLB write */
|
|
#define UIC_GPTCT 0x00000004 /* GPT count timer */
|
|
#define UIC_UIC1NC 0x00000002 /* UIC1 non-critical interrupt */
|
|
#define UIC_UIC1C 0x00000001 /* UIC1 critical interrupt */
|
|
#elif defined(CONFIG_440GX) || defined(CONFIG_440EP)
|
|
#define UIC_U0 0x80000000 /* UART 0 */
|
|
#define UIC_U1 0x40000000 /* UART 1 */
|
|
#define UIC_IIC0 0x20000000 /* IIC */
|
|
#define UIC_IIC1 0x10000000 /* IIC */
|
|
#define UIC_PIM 0x08000000 /* PCI inbound message */
|
|
#define UIC_PCRW 0x04000000 /* PCI command register write */
|
|
#define UIC_PPM 0x02000000 /* PCI power management */
|
|
#define UIC_MSI0 0x01000000 /* PCI MSI level 0 */
|
|
#define UIC_MSI1 0x00800000 /* PCI MSI level 1 */
|
|
#define UIC_MSI2 0x00400000 /* PCI MSI level 2 */
|
|
#define UIC_MTE 0x00200000 /* MAL TXEOB */
|
|
#define UIC_MRE 0x00100000 /* MAL RXEOB */
|
|
#define UIC_D0 0x00080000 /* DMA channel 0 */
|
|
#define UIC_D1 0x00040000 /* DMA channel 1 */
|
|
#define UIC_D2 0x00020000 /* DMA channel 2 */
|
|
#define UIC_D3 0x00010000 /* DMA channel 3 */
|
|
#define UIC_RSVD0 0x00008000 /* Reserved */
|
|
#define UIC_RSVD1 0x00004000 /* Reserved */
|
|
#define UIC_CT0 0x00002000 /* GPT compare timer 0 */
|
|
#define UIC_CT1 0x00001000 /* GPT compare timer 1 */
|
|
#define UIC_CT2 0x00000800 /* GPT compare timer 2 */
|
|
#define UIC_CT3 0x00000400 /* GPT compare timer 3 */
|
|
#define UIC_CT4 0x00000200 /* GPT compare timer 4 */
|
|
#define UIC_EIR0 0x00000100 /* External interrupt 0 */
|
|
#define UIC_EIR1 0x00000080 /* External interrupt 1 */
|
|
#define UIC_EIR2 0x00000040 /* External interrupt 2 */
|
|
#define UIC_EIR3 0x00000020 /* External interrupt 3 */
|
|
#define UIC_EIR4 0x00000010 /* External interrupt 4 */
|
|
#define UIC_EIR5 0x00000008 /* External interrupt 5 */
|
|
#define UIC_EIR6 0x00000004 /* External interrupt 6 */
|
|
#define UIC_UIC1NC 0x00000002 /* UIC1 non-critical interrupt */
|
|
#define UIC_UIC1C 0x00000001 /* UIC1 critical interrupt */
|
|
|
|
#elif defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
|
|
|
|
#define UIC_U0 0x80000000 /* UART 0 */
|
|
#define UIC_U1 0x40000000 /* UART 1 */
|
|
#define UIC_IIC0 0x20000000 /* IIC */
|
|
#define UIC_KRD 0x10000000 /* Kasumi Ready for data */
|
|
#define UIC_KDA 0x08000000 /* Kasumi Data Available */
|
|
#define UIC_PCRW 0x04000000 /* PCI command register write */
|
|
#define UIC_PPM 0x02000000 /* PCI power management */
|
|
#define UIC_IIC1 0x01000000 /* IIC */
|
|
#define UIC_SPI 0x00800000 /* SPI */
|
|
#define UIC_EPCISER 0x00400000 /* External PCI SERR */
|
|
#define UIC_MTE 0x00200000 /* MAL TXEOB */
|
|
#define UIC_MRE 0x00100000 /* MAL RXEOB */
|
|
#define UIC_D0 0x00080000 /* DMA channel 0 */
|
|
#define UIC_D1 0x00040000 /* DMA channel 1 */
|
|
#define UIC_D2 0x00020000 /* DMA channel 2 */
|
|
#define UIC_D3 0x00010000 /* DMA channel 3 */
|
|
#define UIC_UD0 0x00008000 /* UDMA irq 0 */
|
|
#define UIC_UD1 0x00004000 /* UDMA irq 1 */
|
|
#define UIC_UD2 0x00002000 /* UDMA irq 2 */
|
|
#define UIC_UD3 0x00001000 /* UDMA irq 3 */
|
|
#define UIC_HSB2D 0x00000800 /* USB2.0 Device */
|
|
#define UIC_OHCI1 0x00000400 /* USB2.0 Host OHCI irq 1 */
|
|
#define UIC_OHCI2 0x00000200 /* USB2.0 Host OHCI irq 2 */
|
|
#define UIC_EIP94 0x00000100 /* Security EIP94 */
|
|
#define UIC_ETH0 0x00000080 /* Emac 0 */
|
|
#define UIC_ETH1 0x00000040 /* Emac 1 */
|
|
#define UIC_EHCI 0x00000020 /* USB2.0 Host EHCI */
|
|
#define UIC_EIR4 0x00000010 /* External interrupt 4 */
|
|
#define UIC_UIC2NC 0x00000008 /* UIC2 non-critical interrupt */
|
|
#define UIC_UIC2C 0x00000004 /* UIC2 critical interrupt */
|
|
#define UIC_UIC1NC 0x00000002 /* UIC1 non-critical interrupt */
|
|
#define UIC_UIC1C 0x00000001 /* UIC1 critical interrupt */
|
|
|
|
/* For compatibility with 405 code */
|
|
#define UIC_MAL_TXEOB UIC_MTE
|
|
#define UIC_MAL_RXEOB UIC_MRE
|
|
|
|
#elif !defined(CONFIG_440SPE)
|
|
#define UIC_U0 0x80000000 /* UART 0 */
|
|
#define UIC_U1 0x40000000 /* UART 1 */
|
|
#define UIC_IIC0 0x20000000 /* IIC */
|
|
#define UIC_IIC1 0x10000000 /* IIC */
|
|
#define UIC_PIM 0x08000000 /* PCI inbound message */
|
|
#define UIC_PCRW 0x04000000 /* PCI command register write */
|
|
#define UIC_PPM 0x02000000 /* PCI power management */
|
|
#define UIC_MSI0 0x01000000 /* PCI MSI level 0 */
|
|
#define UIC_MSI1 0x00800000 /* PCI MSI level 1 */
|
|
#define UIC_MSI2 0x00400000 /* PCI MSI level 2 */
|
|
#define UIC_MTE 0x00200000 /* MAL TXEOB */
|
|
#define UIC_MRE 0x00100000 /* MAL RXEOB */
|
|
#define UIC_D0 0x00080000 /* DMA channel 0 */
|
|
#define UIC_D1 0x00040000 /* DMA channel 1 */
|
|
#define UIC_D2 0x00020000 /* DMA channel 2 */
|
|
#define UIC_D3 0x00010000 /* DMA channel 3 */
|
|
#define UIC_RSVD0 0x00008000 /* Reserved */
|
|
#define UIC_RSVD1 0x00004000 /* Reserved */
|
|
#define UIC_CT0 0x00002000 /* GPT compare timer 0 */
|
|
#define UIC_CT1 0x00001000 /* GPT compare timer 1 */
|
|
#define UIC_CT2 0x00000800 /* GPT compare timer 2 */
|
|
#define UIC_CT3 0x00000400 /* GPT compare timer 3 */
|
|
#define UIC_CT4 0x00000200 /* GPT compare timer 4 */
|
|
#define UIC_EIR0 0x00000100 /* External interrupt 0 */
|
|
#define UIC_EIR1 0x00000080 /* External interrupt 1 */
|
|
#define UIC_EIR2 0x00000040 /* External interrupt 2 */
|
|
#define UIC_EIR3 0x00000020 /* External interrupt 3 */
|
|
#define UIC_EIR4 0x00000010 /* External interrupt 4 */
|
|
#define UIC_EIR5 0x00000008 /* External interrupt 5 */
|
|
#define UIC_EIR6 0x00000004 /* External interrupt 6 */
|
|
#define UIC_UIC1NC 0x00000002 /* UIC1 non-critical interrupt */
|
|
#define UIC_UIC1C 0x00000001 /* UIC1 critical interrupt */
|
|
#endif /* CONFIG_440GX */
|
|
|
|
/* For compatibility with 405 code */
|
|
#define UIC_MAL_TXEOB UIC_MTE
|
|
#define UIC_MAL_RXEOB UIC_MRE
|
|
|
|
/*---------------------------------------------------------------------------+
|
|
| Universal interrupt controller 1 interrupts (UIC1)
|
|
+---------------------------------------------------------------------------*/
|
|
#if defined(CONFIG_440SP)
|
|
#define UIC_EIR0 0x80000000 /* External interrupt 0 */
|
|
#define UIC_MS 0x40000000 /* MAL SERR */
|
|
#define UIC_MTDE 0x20000000 /* MAL TXDE */
|
|
#define UIC_MRDE 0x10000000 /* MAL RXDE */
|
|
#define UIC_DECE 0x08000000 /* DDR SDRAM correctible error */
|
|
#define UIC_EBCO 0x04000000 /* EBCO interrupt status */
|
|
#define UIC_MTE 0x02000000 /* MAL TXEOB */
|
|
#define UIC_MRE 0x01000000 /* MAL RXEOB */
|
|
#define UIC_P0MSI1 0x00800000 /* PCI0 MSI level 1 */
|
|
#define UIC_P1MSI1 0x00400000 /* PCI1 MSI level 1 */
|
|
#define UIC_P2MSI1 0x00200000 /* PCI2 MSI level 1 */
|
|
#define UIC_L2C 0x00100000 /* L2 cache */
|
|
#define UIC_CT0 0x00080000 /* GPT compare timer 0 */
|
|
#define UIC_CT1 0x00040000 /* GPT compare timer 1 */
|
|
#define UIC_CT2 0x00020000 /* GPT compare timer 2 */
|
|
#define UIC_CT3 0x00010000 /* GPT compare timer 3 */
|
|
#define UIC_CT4 0x00008000 /* GPT compare timer 4 */
|
|
#define UIC_EIR1 0x00004000 /* External interrupt 1 */
|
|
#define UIC_EIR2 0x00002000 /* External interrupt 2 */
|
|
#define UIC_EIR3 0x00001000 /* External interrupt 3 */
|
|
#define UIC_EIR4 0x00000800 /* External interrupt 4 */
|
|
#define UIC_EIR5 0x00000400 /* External interrupt 5 */
|
|
#define UIC_DMAE 0x00000200 /* DMA error */
|
|
#define UIC_I2OE 0x00000100 /* I2O error */
|
|
#define UIC_SRE 0x00000080 /* Serial ROM error */
|
|
#define UIC_P0AE 0x00000040 /* PCI0 asynchronous error */
|
|
#define UIC_P1AE 0x00000020 /* PCI1 asynchronous error */
|
|
#define UIC_P2AE 0x00000010 /* PCI2 asynchronous error */
|
|
#define UIC_ETH0 0x00000008 /* Ethernet 0 */
|
|
#define UIC_EWU0 0x00000004 /* Ethernet 0 wakeup */
|
|
#define UIC_ETH1 0x00000002 /* Reserved */
|
|
#define UIC_XOR 0x00000001 /* XOR */
|
|
#elif defined(CONFIG_440GX) || defined(CONFIG_440EP)
|
|
#define UIC_MS 0x80000000 /* MAL SERR */
|
|
#define UIC_MTDE 0x40000000 /* MAL TXDE */
|
|
#define UIC_MRDE 0x20000000 /* MAL RXDE */
|
|
#define UIC_DEUE 0x10000000 /* DDR SDRAM ECC uncorrectible error*/
|
|
#define UIC_DECE 0x08000000 /* DDR SDRAM correctible error */
|
|
#define UIC_EBCO 0x04000000 /* EBCO interrupt status */
|
|
#define UIC_EBMI 0x02000000 /* EBMI interrupt status */
|
|
#define UIC_OPB 0x01000000 /* OPB to PLB bridge interrupt stat */
|
|
#define UIC_MSI3 0x00800000 /* PCI MSI level 3 */
|
|
#define UIC_MSI4 0x00400000 /* PCI MSI level 4 */
|
|
#define UIC_MSI5 0x00200000 /* PCI MSI level 5 */
|
|
#define UIC_MSI6 0x00100000 /* PCI MSI level 6 */
|
|
#define UIC_MSI7 0x00080000 /* PCI MSI level 7 */
|
|
#define UIC_MSI8 0x00040000 /* PCI MSI level 8 */
|
|
#define UIC_MSI9 0x00020000 /* PCI MSI level 9 */
|
|
#define UIC_MSI10 0x00010000 /* PCI MSI level 10 */
|
|
#define UIC_MSI11 0x00008000 /* PCI MSI level 11 */
|
|
#define UIC_PPMI 0x00004000 /* PPM interrupt status */
|
|
#define UIC_EIR7 0x00002000 /* External interrupt 7 */
|
|
#define UIC_EIR8 0x00001000 /* External interrupt 8 */
|
|
#define UIC_EIR9 0x00000800 /* External interrupt 9 */
|
|
#define UIC_EIR10 0x00000400 /* External interrupt 10 */
|
|
#define UIC_EIR11 0x00000200 /* External interrupt 11 */
|
|
#define UIC_EIR12 0x00000100 /* External interrupt 12 */
|
|
#define UIC_SRE 0x00000080 /* Serial ROM error */
|
|
#define UIC_RSVD2 0x00000040 /* Reserved */
|
|
#define UIC_RSVD3 0x00000020 /* Reserved */
|
|
#define UIC_PAE 0x00000010 /* PCI asynchronous error */
|
|
#define UIC_ETH0 0x00000008 /* Ethernet 0 */
|
|
#define UIC_EWU0 0x00000004 /* Ethernet 0 wakeup */
|
|
#define UIC_ETH1 0x00000002 /* Ethernet 1 */
|
|
#define UIC_EWU1 0x00000001 /* Ethernet 1 wakeup */
|
|
|
|
#elif defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
|
|
|
|
#define UIC_MS 0x80000000 /* MAL SERR */
|
|
#define UIC_MTDE 0x40000000 /* MAL TXDE */
|
|
#define UIC_MRDE 0x20000000 /* MAL RXDE */
|
|
#define UIC_U2 0x10000000 /* UART 2 */
|
|
#define UIC_U3 0x08000000 /* UART 3 */
|
|
#define UIC_EBCO 0x04000000 /* EBCO interrupt status */
|
|
#define UIC_NDFC 0x02000000 /* NDFC */
|
|
#define UIC_KSLE 0x01000000 /* KASUMI slave error */
|
|
#define UIC_CT5 0x00800000 /* GPT compare timer 5 */
|
|
#define UIC_CT6 0x00400000 /* GPT compare timer 6 */
|
|
#define UIC_PLB34I0 0x00200000 /* PLB3X4X MIRQ0 */
|
|
#define UIC_PLB34I1 0x00100000 /* PLB3X4X MIRQ1 */
|
|
#define UIC_PLB34I2 0x00080000 /* PLB3X4X MIRQ2 */
|
|
#define UIC_PLB34I3 0x00040000 /* PLB3X4X MIRQ3 */
|
|
#define UIC_PLB34I4 0x00020000 /* PLB3X4X MIRQ4 */
|
|
#define UIC_PLB34I5 0x00010000 /* PLB3X4X MIRQ5 */
|
|
#define UIC_CT0 0x00008000 /* GPT compare timer 0 */
|
|
#define UIC_CT1 0x00004000 /* GPT compare timer 1 */
|
|
#define UIC_EIR7 0x00002000 /* External interrupt 7 */
|
|
#define UIC_EIR8 0x00001000 /* External interrupt 8 */
|
|
#define UIC_EIR9 0x00000800 /* External interrupt 9 */
|
|
#define UIC_CT2 0x00000400 /* GPT compare timer 2 */
|
|
#define UIC_CT3 0x00000200 /* GPT compare timer 3 */
|
|
#define UIC_CT4 0x00000100 /* GPT compare timer 4 */
|
|
#define UIC_SRE 0x00000080 /* Serial ROM error */
|
|
#define UIC_GPTDC 0x00000040 /* GPT decrementer pulse */
|
|
#define UIC_RSVD0 0x00000020 /* Reserved */
|
|
#define UIC_EPCIPER 0x00000010 /* External PCI PERR */
|
|
#define UIC_EIR0 0x00000008 /* External interrupt 0 */
|
|
#define UIC_EWU0 0x00000004 /* Ethernet 0 wakeup */
|
|
#define UIC_EIR1 0x00000002 /* External interrupt 1 */
|
|
#define UIC_EWU1 0x00000001 /* Ethernet 1 wakeup */
|
|
|
|
/* For compatibility with 405 code */
|
|
#define UIC_MAL_SERR UIC_MS
|
|
#define UIC_MAL_TXDE UIC_MTDE
|
|
#define UIC_MAL_RXDE UIC_MRDE
|
|
#define UIC_ENET UIC_ETH0
|
|
|
|
#elif !defined(CONFIG_440SPE)
|
|
#define UIC_MS 0x80000000 /* MAL SERR */
|
|
#define UIC_MTDE 0x40000000 /* MAL TXDE */
|
|
#define UIC_MRDE 0x20000000 /* MAL RXDE */
|
|
#define UIC_DEUE 0x10000000 /* DDR SDRAM ECC uncorrectible error*/
|
|
#define UIC_DECE 0x08000000 /* DDR SDRAM correctible error */
|
|
#define UIC_EBCO 0x04000000 /* EBCO interrupt status */
|
|
#define UIC_EBMI 0x02000000 /* EBMI interrupt status */
|
|
#define UIC_OPB 0x01000000 /* OPB to PLB bridge interrupt stat */
|
|
#define UIC_MSI3 0x00800000 /* PCI MSI level 3 */
|
|
#define UIC_MSI4 0x00400000 /* PCI MSI level 4 */
|
|
#define UIC_MSI5 0x00200000 /* PCI MSI level 5 */
|
|
#define UIC_MSI6 0x00100000 /* PCI MSI level 6 */
|
|
#define UIC_MSI7 0x00080000 /* PCI MSI level 7 */
|
|
#define UIC_MSI8 0x00040000 /* PCI MSI level 8 */
|
|
#define UIC_MSI9 0x00020000 /* PCI MSI level 9 */
|
|
#define UIC_MSI10 0x00010000 /* PCI MSI level 10 */
|
|
#define UIC_MSI11 0x00008000 /* PCI MSI level 11 */
|
|
#define UIC_PPMI 0x00004000 /* PPM interrupt status */
|
|
#define UIC_EIR7 0x00002000 /* External interrupt 7 */
|
|
#define UIC_EIR8 0x00001000 /* External interrupt 8 */
|
|
#define UIC_EIR9 0x00000800 /* External interrupt 9 */
|
|
#define UIC_EIR10 0x00000400 /* External interrupt 10 */
|
|
#define UIC_EIR11 0x00000200 /* External interrupt 11 */
|
|
#define UIC_EIR12 0x00000100 /* External interrupt 12 */
|
|
#define UIC_SRE 0x00000080 /* Serial ROM error */
|
|
#define UIC_RSVD2 0x00000040 /* Reserved */
|
|
#define UIC_RSVD3 0x00000020 /* Reserved */
|
|
#define UIC_PAE 0x00000010 /* PCI asynchronous error */
|
|
#define UIC_ETH0 0x00000008 /* Ethernet 0 */
|
|
#define UIC_EWU0 0x00000004 /* Ethernet 0 wakeup */
|
|
#define UIC_ETH1 0x00000002 /* Ethernet 1 */
|
|
#define UIC_EWU1 0x00000001 /* Ethernet 1 wakeup */
|
|
#endif /* CONFIG_440SP */
|
|
|
|
/* For compatibility with 405 code */
|
|
#define UIC_MAL_SERR UIC_MS
|
|
#define UIC_MAL_TXDE UIC_MTDE
|
|
#define UIC_MAL_RXDE UIC_MRDE
|
|
#define UIC_ENET UIC_ETH0
|
|
|
|
/*---------------------------------------------------------------------------+
|
|
| Universal interrupt controller 2 interrupts (UIC2)
|
|
+---------------------------------------------------------------------------*/
|
|
#if defined(CONFIG_440GX)
|
|
#define UIC_ETH2 0x80000000 /* Ethernet 2 */
|
|
#define UIC_EWU2 0x40000000 /* Ethernet 2 wakeup */
|
|
#define UIC_ETH3 0x20000000 /* Ethernet 3 */
|
|
#define UIC_EWU3 0x10000000 /* Ethernet 3 wakeup */
|
|
#define UIC_TAH0 0x08000000 /* TAH 0 */
|
|
#define UIC_TAH1 0x04000000 /* TAH 1 */
|
|
#define UIC_IMUOBFQ 0x02000000 /* IMU outbound free queue */
|
|
#define UIC_IMUIBPQ 0x01000000 /* IMU inbound post queue */
|
|
#define UIC_IMUIRQDB 0x00800000 /* IMU irq doorbell */
|
|
#define UIC_IMUIBDB 0x00400000 /* IMU inbound doorbell */
|
|
#define UIC_IMUMSG0 0x00200000 /* IMU inbound message 0 */
|
|
#define UIC_IMUMSG1 0x00100000 /* IMU inbound message 1 */
|
|
#define UIC_IMUTO 0x00080000 /* IMU timeout */
|
|
#define UIC_MSI12 0x00040000 /* PCI MSI level 12 */
|
|
#define UIC_MSI13 0x00020000 /* PCI MSI level 13 */
|
|
#define UIC_MSI14 0x00010000 /* PCI MSI level 14 */
|
|
#define UIC_MSI15 0x00008000 /* PCI MSI level 15 */
|
|
#define UIC_EIR13 0x00004000 /* External interrupt 13 */
|
|
#define UIC_EIR14 0x00002000 /* External interrupt 14 */
|
|
#define UIC_EIR15 0x00001000 /* External interrupt 15 */
|
|
#define UIC_EIR16 0x00000800 /* External interrupt 16 */
|
|
#define UIC_EIR17 0x00000400 /* External interrupt 17 */
|
|
#define UIC_PCIVPD 0x00000200 /* PCI VPD */
|
|
#define UIC_L2C 0x00000100 /* L2 Cache */
|
|
#define UIC_ETH2PCS 0x00000080 /* Ethernet 2 PCS */
|
|
#define UIC_ETH3PCS 0x00000040 /* Ethernet 3 PCS */
|
|
#define UIC_RSVD26 0x00000020 /* Reserved */
|
|
#define UIC_RSVD27 0x00000010 /* Reserved */
|
|
#define UIC_RSVD28 0x00000008 /* Reserved */
|
|
#define UIC_RSVD29 0x00000004 /* Reserved */
|
|
#define UIC_RSVD30 0x00000002 /* Reserved */
|
|
#define UIC_RSVD31 0x00000001 /* Reserved */
|
|
|
|
#elif defined(CONFIG_440EPX) || defined(CONFIG_440GRX) /* UIC2 */
|
|
|
|
#define UIC_EIR5 0x80000000 /* External interrupt 5 */
|
|
#define UIC_EIR6 0x40000000 /* External interrupt 6 */
|
|
#define UIC_OPB 0x20000000 /* OPB to PLB bridge interrupt stat */
|
|
#define UIC_EIR2 0x10000000 /* External interrupt 2 */
|
|
#define UIC_EIR3 0x08000000 /* External interrupt 3 */
|
|
#define UIC_DDR2 0x04000000 /* DDR2 sdram */
|
|
#define UIC_MCTX0 0x02000000 /* MAl intp coalescence TX0 */
|
|
#define UIC_MCTX1 0x01000000 /* MAl intp coalescence TX1 */
|
|
#define UIC_MCTR0 0x00800000 /* MAl intp coalescence TR0 */
|
|
#define UIC_MCTR1 0x00400000 /* MAl intp coalescence TR1 */
|
|
|
|
#endif /* CONFIG_440GX */
|
|
|
|
/*---------------------------------------------------------------------------+
|
|
| Universal interrupt controller Base 0 interrupts (UICB0)
|
|
+---------------------------------------------------------------------------*/
|
|
#if defined(CONFIG_440GX)
|
|
#define UICB0_UIC0CI 0x80000000 /* UIC0 Critical Interrupt */
|
|
#define UICB0_UIC0NCI 0x40000000 /* UIC0 Noncritical Interrupt */
|
|
#define UICB0_UIC1CI 0x20000000 /* UIC1 Critical Interrupt */
|
|
#define UICB0_UIC1NCI 0x10000000 /* UIC1 Noncritical Interrupt */
|
|
#define UICB0_UIC2CI 0x08000000 /* UIC2 Critical Interrupt */
|
|
#define UICB0_UIC2NCI 0x04000000 /* UIC2 Noncritical Interrupt */
|
|
|
|
#define UICB0_ALL (UICB0_UIC0CI | UICB0_UIC0NCI | UICB0_UIC1CI | \
|
|
UICB0_UIC1NCI | UICB0_UIC2CI | UICB0_UIC2NCI)
|
|
|
|
#elif defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
|
|
|
|
#define UICB0_UIC1CI 0x00000000 /* UIC1 Critical Interrupt */
|
|
#define UICB0_UIC1NCI 0x00000000 /* UIC1 Noncritical Interrupt */
|
|
#define UICB0_UIC2CI 0x00000000 /* UIC2 Critical Interrupt */
|
|
#define UICB0_UIC2NCI 0x00000000 /* UIC2 Noncritical Interrupt */
|
|
|
|
#define UICB0_ALL (UICB0_UIC1CI | UICB0_UIC1NCI | \
|
|
UICB0_UIC1CI | UICB0_UIC2NCI)
|
|
|
|
#endif /* CONFIG_440GX */
|
|
/*---------------------------------------------------------------------------+
|
|
| Universal interrupt controller interrupts
|
|
+---------------------------------------------------------------------------*/
|
|
#if defined(CONFIG_440SPE)
|
|
/*#define UICB0_UIC0CI 0x80000000*/ /* UIC0 Critical Interrupt */
|
|
/*#define UICB0_UIC0NCI 0x40000000*/ /* UIC0 Noncritical Interrupt */
|
|
#define UICB0_UIC1CI 0x00000002 /* UIC1 Critical Interrupt */
|
|
#define UICB0_UIC1NCI 0x00000001 /* UIC1 Noncritical Interrupt */
|
|
#define UICB0_UIC2CI 0x00200000 /* UIC2 Critical Interrupt */
|
|
#define UICB0_UIC2NCI 0x00100000 /* UIC2 Noncritical Interrupt */
|
|
#define UICB0_UIC3CI 0x00008000 /* UIC3 Critical Interrupt */
|
|
#define UICB0_UIC3NCI 0x00004000 /* UIC3 Noncritical Interrupt */
|
|
|
|
#define UICB0_ALL (UICB0_UIC1CI | UICB0_UIC1NCI | UICB0_UIC2CI | \
|
|
UICB0_UIC2NCI | UICB0_UIC3CI | UICB0_UIC3NCI)
|
|
/*---------------------------------------------------------------------------+
|
|
| Universal interrupt controller 0 interrupts (UIC0)
|
|
+---------------------------------------------------------------------------*/
|
|
#define UIC_U0 0x80000000 /* UART 0 */
|
|
#define UIC_U1 0x40000000 /* UART 1 */
|
|
#define UIC_IIC0 0x20000000 /* IIC */
|
|
#define UIC_IIC1 0x10000000 /* IIC */
|
|
#define UIC_PIM 0x08000000 /* PCI inbound message */
|
|
#define UIC_PCRW 0x04000000 /* PCI command register write */
|
|
#define UIC_PPM 0x02000000 /* PCI power management */
|
|
#define UIC_PVPDA 0x01000000 /* PCIx 0 vpd access */
|
|
#define UIC_MSI0 0x00800000 /* PCIx MSI level 0 */
|
|
#define UIC_EIR15 0x00400000 /* External intp 15 */
|
|
#define UIC_PEMSI0 0x00080000 /* PCIe MSI level 0 */
|
|
#define UIC_PEMSI1 0x00040000 /* PCIe MSI level 1 */
|
|
#define UIC_PEMSI2 0x00020000 /* PCIe MSI level 2 */
|
|
#define UIC_PEMSI3 0x00010000 /* PCIe MSI level 3 */
|
|
#define UIC_EIR14 0x00002000 /* External interrupt 14 */
|
|
#define UIC_D0CPFF 0x00001000 /* DMA0 cp fifo full */
|
|
#define UIC_D0CSNS 0x00000800 /* DMA0 cs fifo needs service */
|
|
#define UIC_D1CPFF 0x00000400 /* DMA1 cp fifo full */
|
|
#define UIC_D1CSNS 0x00000200 /* DMA1 cs fifo needs service */
|
|
#define UIC_I2OID 0x00000100 /* I2O inbound door bell */
|
|
#define UIC_I2OLNE 0x00000080 /* I2O Inbound Post List FIFO Not Empty */
|
|
#define UIC_I20R0LL 0x00000040 /* I2O Region 0 Low Latency PLB Write */
|
|
#define UIC_I2OR1LL 0x00000020 /* I2O Region 1 Low Latency PLB Write */
|
|
#define UIC_I20R0HB 0x00000010 /* I2O Region 0 High Bandwidth PLB Write */
|
|
#define UIC_I2OR1HB 0x00000008 /* I2O Region 1 High Bandwidth PLB Write */
|
|
#define UIC_CPTCNT 0x00000004 /* GPT Count Timer */
|
|
/*---------------------------------------------------------------------------+
|
|
| Universal interrupt controller 1 interrupts (UIC1)
|
|
+---------------------------------------------------------------------------*/
|
|
#define UIC_EIR13 0x80000000 /* externei intp 13 */
|
|
#define UIC_MS 0x40000000 /* MAL SERR */
|
|
#define UIC_MTDE 0x20000000 /* MAL TXDE */
|
|
#define UIC_MRDE 0x10000000 /* MAL RXDE */
|
|
#define UIC_DEUE 0x08000000 /* DDR SDRAM ECC correct/uncorrectable error */
|
|
#define UIC_EBCO 0x04000000 /* EBCO interrupt status */
|
|
#define UIC_MTE 0x02000000 /* MAL TXEOB */
|
|
#define UIC_MRE 0x01000000 /* MAL RXEOB */
|
|
#define UIC_MSI1 0x00800000 /* PCI MSI level 1 */
|
|
#define UIC_MSI2 0x00400000 /* PCI MSI level 2 */
|
|
#define UIC_MSI3 0x00200000 /* PCI MSI level 3 */
|
|
#define UIC_L2C 0x00100000 /* L2 cache */
|
|
#define UIC_CT0 0x00080000 /* GPT compare timer 0 */
|
|
#define UIC_CT1 0x00040000 /* GPT compare timer 1 */
|
|
#define UIC_CT2 0x00020000 /* GPT compare timer 2 */
|
|
#define UIC_CT3 0x00010000 /* GPT compare timer 3 */
|
|
#define UIC_CT4 0x00008000 /* GPT compare timer 4 */
|
|
#define UIC_EIR12 0x00004000 /* External interrupt 12 */
|
|
#define UIC_EIR11 0x00002000 /* External interrupt 11 */
|
|
#define UIC_EIR10 0x00001000 /* External interrupt 10 */
|
|
#define UIC_EIR9 0x00000800 /* External interrupt 9 */
|
|
#define UIC_EIR8 0x00000400 /* External interrupt 8 */
|
|
#define UIC_DMAE 0x00000200 /* dma error */
|
|
#define UIC_I2OE 0x00000100 /* i2o error */
|
|
#define UIC_SRE 0x00000080 /* Serial ROM error */
|
|
#define UIC_PCIXAE 0x00000040 /* Pcix0 async error */
|
|
#define UIC_EIR7 0x00000020 /* External interrupt 7 */
|
|
#define UIC_EIR6 0x00000010 /* External interrupt 6 */
|
|
#define UIC_ETH0 0x00000008 /* Ethernet 0 */
|
|
#define UIC_EWU0 0x00000004 /* Ethernet 0 wakeup */
|
|
#define UIC_ETH1 0x00000002 /* reserved */
|
|
#define UIC_XOR 0x00000001 /* xor */
|
|
|
|
/*---------------------------------------------------------------------------+
|
|
| Universal interrupt controller 2 interrupts (UIC2)
|
|
+---------------------------------------------------------------------------*/
|
|
#define UIC_PEOAL 0x80000000 /* PE0 AL */
|
|
#define UIC_PEOVA 0x40000000 /* PE0 VPD access */
|
|
#define UIC_PEOHRR 0x20000000 /* PE0 Host reset request rising */
|
|
#define UIC_PE0HRF 0x10000000 /* PE0 Host reset request falling */
|
|
#define UIC_PE0TCR 0x08000000 /* PE0 TCR */
|
|
#define UIC_PE0BVCO 0x04000000 /* PE0 Busmaster VCO */
|
|
#define UIC_PE0DCRE 0x02000000 /* PE0 DCR error */
|
|
#define UIC_PE1AL 0x00800000 /* PE1 AL */
|
|
#define UIC_PE1VA 0x00400000 /* PE1 VPD access */
|
|
#define UIC_PE1HRR 0x00200000 /* PE1 Host reset request rising */
|
|
#define UIC_PE1HRF 0x00100000 /* PE1 Host reset request falling */
|
|
#define UIC_PE1TCR 0x00080000 /* PE1 TCR */
|
|
#define UIC_PE1BVCO 0x00040000 /* PE1 Busmaster VCO */
|
|
#define UIC_PE1DCRE 0x00020000 /* PE1 DCR error */
|
|
#define UIC_PE2AL 0x00008000 /* PE2 AL */
|
|
#define UIC_PE2VA 0x00004000 /* PE2 VPD access */
|
|
#define UIC_PE2HRR 0x00002000 /* PE2 Host reset request rising */
|
|
#define UIC_PE2HRF 0x00001000 /* PE2 Host reset request falling */
|
|
#define UIC_PE2TCR 0x00000800 /* PE2 TCR */
|
|
#define UIC_PE2BVCO 0x00000400 /* PE2 Busmaster VCO */
|
|
#define UIC_PE2DCRE 0x00000200 /* PE2 DCR error */
|
|
#define UIC_EIR5 0x00000080 /* External interrupt 5 */
|
|
#define UIC_EIR4 0x00000040 /* External interrupt 4 */
|
|
#define UIC_EIR3 0x00000020 /* External interrupt 3 */
|
|
#define UIC_EIR2 0x00000010 /* External interrupt 2 */
|
|
#define UIC_EIR1 0x00000008 /* External interrupt 1 */
|
|
#define UIC_EIR0 0x00000004 /* External interrupt 0 */
|
|
#endif /* CONFIG_440SPE */
|
|
|
|
/*-----------------------------------------------------------------------------+
|
|
| External Bus Controller Bit Settings
|
|
+-----------------------------------------------------------------------------*/
|
|
#define EBC_CFGADDR_MASK 0x0000003F
|
|
|
|
#define EBC_BXCR_BAS_ENCODE(n) ((((unsigned long)(n))&0xFFF00000)<<0)
|
|
#define EBC_BXCR_BS_MASK 0x000E0000
|
|
#define EBC_BXCR_BS_1MB 0x00000000
|
|
#define EBC_BXCR_BS_2MB 0x00020000
|
|
#define EBC_BXCR_BS_4MB 0x00040000
|
|
#define EBC_BXCR_BS_8MB 0x00060000
|
|
#define EBC_BXCR_BS_16MB 0x00080000
|
|
#define EBC_BXCR_BS_32MB 0x000A0000
|
|
#define EBC_BXCR_BS_64MB 0x000C0000
|
|
#define EBC_BXCR_BS_128MB 0x000E0000
|
|
#define EBC_BXCR_BU_MASK 0x00018000
|
|
#define EBC_BXCR_BU_R 0x00008000
|
|
#define EBC_BXCR_BU_W 0x00010000
|
|
#define EBC_BXCR_BU_RW 0x00018000
|
|
#define EBC_BXCR_BW_MASK 0x00006000
|
|
#define EBC_BXCR_BW_8BIT 0x00000000
|
|
#define EBC_BXCR_BW_16BIT 0x00002000
|
|
#define EBC_BXCR_BW_32BIT 0x00006000
|
|
#define EBC_BXAP_BME_ENABLED 0x80000000
|
|
#define EBC_BXAP_BME_DISABLED 0x00000000
|
|
#define EBC_BXAP_TWT_ENCODE(n) ((((unsigned long)(n))&0xFF)<<23)
|
|
#define EBC_BXAP_BCE_DISABLE 0x00000000
|
|
#define EBC_BXAP_BCE_ENABLE 0x00400000
|
|
#define EBC_BXAP_BCT_MASK 0x00300000
|
|
#define EBC_BXAP_BCT_2TRANS 0x00000000
|
|
#define EBC_BXAP_BCT_4TRANS 0x00100000
|
|
#define EBC_BXAP_BCT_8TRANS 0x00200000
|
|
#define EBC_BXAP_BCT_16TRANS 0x00300000
|
|
#define EBC_BXAP_CSN_ENCODE(n) ((((unsigned long)(n))&0x3)<<18)
|
|
#define EBC_BXAP_OEN_ENCODE(n) ((((unsigned long)(n))&0x3)<<16)
|
|
#define EBC_BXAP_WBN_ENCODE(n) ((((unsigned long)(n))&0x3)<<14)
|
|
#define EBC_BXAP_WBF_ENCODE(n) ((((unsigned long)(n))&0x3)<<12)
|
|
#define EBC_BXAP_TH_ENCODE(n) ((((unsigned long)(n))&0x7)<<9)
|
|
#define EBC_BXAP_RE_ENABLED 0x00000100
|
|
#define EBC_BXAP_RE_DISABLED 0x00000000
|
|
#define EBC_BXAP_SOR_DELAYED 0x00000000
|
|
#define EBC_BXAP_SOR_NONDELAYED 0x00000080
|
|
#define EBC_BXAP_BEM_WRITEONLY 0x00000000
|
|
#define EBC_BXAP_BEM_RW 0x00000040
|
|
#define EBC_BXAP_PEN_DISABLED 0x00000000
|
|
|
|
#define EBC_CFG_LE_MASK 0x80000000
|
|
#define EBC_CFG_LE_UNLOCK 0x00000000
|
|
#define EBC_CFG_LE_LOCK 0x80000000
|
|
#define EBC_CFG_PTD_MASK 0x40000000
|
|
#define EBC_CFG_PTD_ENABLE 0x00000000
|
|
#define EBC_CFG_PTD_DISABLE 0x40000000
|
|
#define EBC_CFG_RTC_MASK 0x38000000
|
|
#define EBC_CFG_RTC_16PERCLK 0x00000000
|
|
#define EBC_CFG_RTC_32PERCLK 0x08000000
|
|
#define EBC_CFG_RTC_64PERCLK 0x10000000
|
|
#define EBC_CFG_RTC_128PERCLK 0x18000000
|
|
#define EBC_CFG_RTC_256PERCLK 0x20000000
|
|
#define EBC_CFG_RTC_512PERCLK 0x28000000
|
|
#define EBC_CFG_RTC_1024PERCLK 0x30000000
|
|
#define EBC_CFG_RTC_2048PERCLK 0x38000000
|
|
#define EBC_CFG_ATC_MASK 0x04000000
|
|
#define EBC_CFG_ATC_HI 0x00000000
|
|
#define EBC_CFG_ATC_PREVIOUS 0x04000000
|
|
#define EBC_CFG_DTC_MASK 0x02000000
|
|
#define EBC_CFG_DTC_HI 0x00000000
|
|
#define EBC_CFG_DTC_PREVIOUS 0x02000000
|
|
#define EBC_CFG_CTC_MASK 0x01000000
|
|
#define EBC_CFG_CTC_HI 0x00000000
|
|
#define EBC_CFG_CTC_PREVIOUS 0x01000000
|
|
#define EBC_CFG_OEO_MASK 0x00800000
|
|
#define EBC_CFG_OEO_HI 0x00000000
|
|
#define EBC_CFG_OEO_PREVIOUS 0x00800000
|
|
#define EBC_CFG_EMC_MASK 0x00400000
|
|
#define EBC_CFG_EMC_NONDEFAULT 0x00000000
|
|
#define EBC_CFG_EMC_DEFAULT 0x00400000
|
|
#define EBC_CFG_PME_MASK 0x00200000
|
|
#define EBC_CFG_PME_DISABLE 0x00000000
|
|
#define EBC_CFG_PME_ENABLE 0x00200000
|
|
#define EBC_CFG_PMT_MASK 0x001F0000
|
|
#define EBC_CFG_PMT_ENCODE(n) ((((unsigned long)(n))&0x1F)<<12)
|
|
#define EBC_CFG_PR_MASK 0x0000C000
|
|
#define EBC_CFG_PR_16 0x00000000
|
|
#define EBC_CFG_PR_32 0x00004000
|
|
#define EBC_CFG_PR_64 0x00008000
|
|
#define EBC_CFG_PR_128 0x0000C000
|
|
|
|
/*-----------------------------------------------------------------------------+
|
|
| SDR0 Bit Settings
|
|
+-----------------------------------------------------------------------------*/
|
|
#if defined(CONFIG_440SPE)
|
|
#define SDR0_CP440 0x0180
|
|
#define SDR0_CP440_ERPN_MASK 0x30000000
|
|
#define SDR0_CP440_ERPN_MASK_HI 0x3000
|
|
#define SDR0_CP440_ERPN_MASK_LO 0x0000
|
|
#define SDR0_CP440_ERPN_EBC 0x10000000
|
|
#define SDR0_CP440_ERPN_EBC_HI 0x1000
|
|
#define SDR0_CP440_ERPN_EBC_LO 0x0000
|
|
#define SDR0_CP440_ERPN_PCI 0x20000000
|
|
#define SDR0_CP440_ERPN_PCI_HI 0x2000
|
|
#define SDR0_CP440_ERPN_PCI_LO 0x0000
|
|
#define SDR0_CP440_ERPN_ENCODE(n) ((((unsigned long)(n))&0x03)<<28)
|
|
#define SDR0_CP440_ERPN_DECODE(n) ((((unsigned long)(n))>>28)&0x03)
|
|
#define SDR0_CP440_NTO1_MASK 0x00000002
|
|
#define SDR0_CP440_NTO1_NTOP 0x00000000
|
|
#define SDR0_CP440_NTO1_NTO1 0x00000002
|
|
#define SDR0_CP440_NTO1_ENCODE(n) ((((unsigned long)(n))&0x01)<<1)
|
|
#define SDR0_CP440_NTO1_DECODE(n) ((((unsigned long)(n))>>1)&0x01)
|
|
#define SDR0_CFGADDR 0x00E /*already defined line 277 */
|
|
#define SDR0_CFGDATA 0x00F
|
|
|
|
|
|
#define SDR0_SDSTP0 0x0020
|
|
#define SDR0_SDSTP0_ENG_MASK 0x80000000
|
|
#define SDR0_SDSTP0_ENG_PLLDIS 0x00000000
|
|
#define SDR0_SDSTP0_ENG_PLLENAB 0x80000000
|
|
#define SDR0_SDSTP0_ENG_ENCODE(n) ((((unsigned long)(n))&0x01)<<31)
|
|
#define SDR0_SDSTP0_ENG_DECODE(n) ((((unsigned long)(n))>>31)&0x01)
|
|
#define SDR0_SDSTP0_SRC_MASK 0x40000000
|
|
#define SDR0_SDSTP0_SRC_PLLOUTA 0x00000000
|
|
#define SDR0_SDSTP0_SRC_PLLOUTB 0x40000000
|
|
#define SDR0_SDSTP0_SRC_ENCODE(n) ((((unsigned long)(n))&0x01)<<30)
|
|
#define SDR0_SDSTP0_SRC_DECODE(n) ((((unsigned long)(n))>>30)&0x01)
|
|
#define SDR0_SDSTP0_SEL_MASK 0x38000000
|
|
#define SDR0_SDSTP0_SEL_PLLOUT 0x00000000
|
|
#define SDR0_SDSTP0_SEL_CPU 0x08000000
|
|
#define SDR0_SDSTP0_SEL_EBC 0x28000000
|
|
#define SDR0_SDSTP0_SEL_ENCODE(n) ((((unsigned long)(n))&0x07)<<27)
|
|
#define SDR0_SDSTP0_SEL_DECODE(n) ((((unsigned long)(n))>>27)&0x07)
|
|
#define SDR0_SDSTP0_TUNE_MASK 0x07FE0000
|
|
#define SDR0_SDSTP0_TUNE_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<17)
|
|
#define SDR0_SDSTP0_TUNE_DECODE(n) ((((unsigned long)(n))>>17)&0x3FF)
|
|
#define SDR0_SDSTP0_FBDV_MASK 0x0001F000
|
|
#define SDR0_SDSTP0_FBDV_ENCODE(n) ((((unsigned long)(n))&0x1F)<<12)
|
|
#define SDR0_SDSTP0_FBDV_DECODE(n) ((((((unsigned long)(n))>>12)-1)&0x1F)+1)
|
|
#define SDR0_SDSTP0_FWDVA_MASK 0x00000F00
|
|
#define SDR0_SDSTP0_FWDVA_ENCODE(n) ((((unsigned long)(n))&0x0F)<<8)
|
|
#define SDR0_SDSTP0_FWDVA_DECODE(n) ((((((unsigned long)(n))>>8)-1)&0x0F)+1)
|
|
#define SDR0_SDSTP0_FWDVB_MASK 0x000000E0
|
|
#define SDR0_SDSTP0_FWDVB_ENCODE(n) ((((unsigned long)(n))&0x07)<<5)
|
|
#define SDR0_SDSTP0_FWDVB_DECODE(n) ((((((unsigned long)(n))>>5)-1)&0x07)+1)
|
|
#define SDR0_SDSTP0_PRBDV0_MASK 0x0000001C
|
|
#define SDR0_SDSTP0_PRBDV0_ENCODE(n) ((((unsigned long)(n))&0x07)<<2)
|
|
#define SDR0_SDSTP0_PRBDV0_DECODE(n) ((((((unsigned long)(n))>>2)-1)&0x07)+1)
|
|
#define SDR0_SDSTP0_OPBDV0_MASK 0x00000003
|
|
#define SDR0_SDSTP0_OPBDV0_ENCODE(n) ((((unsigned long)(n))&0x03)<<0)
|
|
#define SDR0_SDSTP0_OPBDV0_DECODE(n) ((((((unsigned long)(n))>>0)-1)&0x03)+1)
|
|
|
|
|
|
#define SDR0_SDSTP1 0x0021
|
|
#define SDR0_SDSTP1_LFBDV_MASK 0xFC000000
|
|
#define SDR0_SDSTP1_LFBDV_ENCODE(n) ((((unsigned long)(n))&0x3F)<<26)
|
|
#define SDR0_SDSTP1_LFBDV_DECODE(n) ((((unsigned long)(n))>>26)&0x3F)
|
|
#define SDR0_SDSTP1_PERDV0_MASK 0x03000000
|
|
#define SDR0_SDSTP1_PERDV0_ENCODE(n) ((((unsigned long)(n))&0x03)<<24)
|
|
#define SDR0_SDSTP1_PERDV0_DECODE(n) ((((unsigned long)(n))>>24)&0x03)
|
|
#define SDR0_SDSTP1_MALDV0_MASK 0x00C00000
|
|
#define SDR0_SDSTP1_MALDV0_ENCODE(n) ((((unsigned long)(n))&0x03)<<22)
|
|
#define SDR0_SDSTP1_MALDV0_DECODE(n) ((((unsigned long)(n))>>22)&0x03)
|
|
#define SDR0_SDSTP1_DDR_MODE_MASK 0x00300000
|
|
#define SDR0_SDSTP1_DDR1_MODE 0x00100000
|
|
#define SDR0_SDSTP1_DDR2_MODE 0x00200000
|
|
#define SDR0_SDSTP1_DDR_ENCODE(n) ((((unsigned long)(n))&0x03)<<20)
|
|
#define SDR0_SDSTP1_DDR_DECODE(n) ((((unsigned long)(n))>>20)&0x03)
|
|
#define SDR0_SDSTP1_ERPN_MASK 0x00080000
|
|
#define SDR0_SDSTP1_ERPN_EBC 0x00000000
|
|
#define SDR0_SDSTP1_ERPN_PCI 0x00080000
|
|
#define SDR0_SDSTP1_PAE_MASK 0x00040000
|
|
#define SDR0_SDSTP1_PAE_DISABLE 0x00000000
|
|
#define SDR0_SDSTP1_PAE_ENABLE 0x00040000
|
|
#define SDR0_SDSTP1_PAE_ENCODE(n) ((((unsigned long)(n))&0x01)<<18)
|
|
#define SDR0_SDSTP1_PAE_DECODE(n) ((((unsigned long)(n))>>18)&0x01)
|
|
#define SDR0_SDSTP1_PHCE_MASK 0x00020000
|
|
#define SDR0_SDSTP1_PHCE_DISABLE 0x00000000
|
|
#define SDR0_SDSTP1_PHCE_ENABLE 0x00020000
|
|
#define SDR0_SDSTP1_PHCE_ENCODE(n) ((((unsigned long)(n))&0x01)<<17)
|
|
#define SDR0_SDSTP1_PHCE_DECODE(n) ((((unsigned long)(n))>>17)&0x01)
|
|
#define SDR0_SDSTP1_PISE_MASK 0x00010000
|
|
#define SDR0_SDSTP1_PISE_DISABLE 0x00000000
|
|
#define SDR0_SDSTP1_PISE_ENABLE 0x00001000
|
|
#define SDR0_SDSTP1_PISE_ENCODE(n) ((((unsigned long)(n))&0x01)<<16)
|
|
#define SDR0_SDSTP1_PISE_DECODE(n) ((((unsigned long)(n))>>16)&0x01)
|
|
#define SDR0_SDSTP1_PCWE_MASK 0x00008000
|
|
#define SDR0_SDSTP1_PCWE_DISABLE 0x00000000
|
|
#define SDR0_SDSTP1_PCWE_ENABLE 0x00008000
|
|
#define SDR0_SDSTP1_PCWE_ENCODE(n) ((((unsigned long)(n))&0x01)<<15)
|
|
#define SDR0_SDSTP1_PCWE_DECODE(n) ((((unsigned long)(n))>>15)&0x01)
|
|
#define SDR0_SDSTP1_PPIM_MASK 0x00007800
|
|
#define SDR0_SDSTP1_PPIM_ENCODE(n) ((((unsigned long)(n))&0x0F)<<11)
|
|
#define SDR0_SDSTP1_PPIM_DECODE(n) ((((unsigned long)(n))>>11)&0x0F)
|
|
#define SDR0_SDSTP1_PR64E_MASK 0x00000400
|
|
#define SDR0_SDSTP1_PR64E_DISABLE 0x00000000
|
|
#define SDR0_SDSTP1_PR64E_ENABLE 0x00000400
|
|
#define SDR0_SDSTP1_PR64E_ENCODE(n) ((((unsigned long)(n))&0x01)<<10)
|
|
#define SDR0_SDSTP1_PR64E_DECODE(n) ((((unsigned long)(n))>>10)&0x01)
|
|
#define SDR0_SDSTP1_PXFS_MASK 0x00000300
|
|
#define SDR0_SDSTP1_PXFS_100_133 0x00000000
|
|
#define SDR0_SDSTP1_PXFS_66_100 0x00000100
|
|
#define SDR0_SDSTP1_PXFS_50_66 0x00000200
|
|
#define SDR0_SDSTP1_PXFS_0_50 0x00000300
|
|
#define SDR0_SDSTP1_PXFS_ENCODE(n) ((((unsigned long)(n))&0x03)<<8)
|
|
#define SDR0_SDSTP1_PXFS_DECODE(n) ((((unsigned long)(n))>>8)&0x03)
|
|
#define SDR0_SDSTP1_EBCW_MASK 0x00000080 /* SOP */
|
|
#define SDR0_SDSTP1_EBCW_8_BITS 0x00000000 /* SOP */
|
|
#define SDR0_SDSTP1_EBCW_16_BITS 0x00000080 /* SOP */
|
|
#define SDR0_SDSTP1_DBGEN_MASK 0x00000030 /* $218C */
|
|
#define SDR0_SDSTP1_DBGEN_FUNC 0x00000000
|
|
#define SDR0_SDSTP1_DBGEN_TRACE 0x00000010
|
|
#define SDR0_SDSTP1_DBGEN_ENCODE(n) ((((unsigned long)(n))&0x03)<<4) /* $218C */
|
|
#define SDR0_SDSTP1_DBGEN_DECODE(n) ((((unsigned long)(n))>>4)&0x03) /* $218C */
|
|
#define SDR0_SDSTP1_ETH_MASK 0x00000004
|
|
#define SDR0_SDSTP1_ETH_10_100 0x00000000
|
|
#define SDR0_SDSTP1_ETH_GIGA 0x00000004
|
|
#define SDR0_SDSTP1_ETH_ENCODE(n) ((((unsigned long)(n))&0x01)<<2)
|
|
#define SDR0_SDSTP1_ETH_DECODE(n) ((((unsigned long)(n))>>2)&0x01)
|
|
#define SDR0_SDSTP1_NTO1_MASK 0x00000001
|
|
#define SDR0_SDSTP1_NTO1_DISABLE 0x00000000
|
|
#define SDR0_SDSTP1_NTO1_ENABLE 0x00000001
|
|
#define SDR0_SDSTP1_NTO1_ENCODE(n) ((((unsigned long)(n))&0x01)<<0)
|
|
#define SDR0_SDSTP1_NTO1_DECODE(n) ((((unsigned long)(n))>>0)&0x01)
|
|
|
|
#define SDR0_SDSTP2 0x0022
|
|
#define SDR0_SDSTP2_P1AE_MASK 0x80000000
|
|
#define SDR0_SDSTP2_P1AE_DISABLE 0x00000000
|
|
#define SDR0_SDSTP2_P1AE_ENABLE 0x80000000
|
|
#define SDR0_SDSTP2_P1AE_ENCODE(n) ((((unsigned long)(n))&0x01)<<31)
|
|
#define SDR0_SDSTP2_P1AE_DECODE(n) ((((unsigned long)(n))>>31)&0x01)
|
|
#define SDR0_SDSTP2_P1HCE_MASK 0x40000000
|
|
#define SDR0_SDSTP2_P1HCE_DISABLE 0x00000000
|
|
#define SDR0_SDSTP2_P1HCE_ENABLE 0x40000000
|
|
#define SDR0_SDSTP2_P1HCE_ENCODE(n) ((((unsigned long)(n))&0x01)<<30)
|
|
#define SDR0_SDSTP2_P1HCE_DECODE(n) ((((unsigned long)(n))>>30)&0x01)
|
|
#define SDR0_SDSTP2_P1ISE_MASK 0x20000000
|
|
#define SDR0_SDSTP2_P1ISE_DISABLE 0x00000000
|
|
#define SDR0_SDSTP2_P1ISE_ENABLE 0x20000000
|
|
#define SDR0_SDSTP2_P1ISE_ENCODE(n) ((((unsigned long)(n))&0x01)<<29)
|
|
#define SDR0_SDSTP2_P1ISE_DECODE(n) ((((unsigned long)(n))>>29)&0x01)
|
|
#define SDR0_SDSTP2_P1CWE_MASK 0x10000000
|
|
#define SDR0_SDSTP2_P1CWE_DISABLE 0x00000000
|
|
#define SDR0_SDSTP2_P1CWE_ENABLE 0x10000000
|
|
#define SDR0_SDSTP2_P1CWE_ENCODE(n) ((((unsigned long)(n))&0x01)<<28)
|
|
#define SDR0_SDSTP2_P1CWE_DECODE(n) ((((unsigned long)(n))>>28)&0x01)
|
|
#define SDR0_SDSTP2_P1PIM_MASK 0x0F000000
|
|
#define SDR0_SDSTP2_P1PIM_ENCODE(n) ((((unsigned long)(n))&0x0F)<<24)
|
|
#define SDR0_SDSTP2_P1PIM_DECODE(n) ((((unsigned long)(n))>>24)&0x0F)
|
|
#define SDR0_SDSTP2_P1R64E_MASK 0x00800000
|
|
#define SDR0_SDSTP2_P1R64E_DISABLE 0x00000000
|
|
#define SDR0_SDSTP2_P1R64E_ENABLE 0x00800000
|
|
#define SDR0_SDSTP2_P1R64E_ENCODE(n) ((((unsigned long)(n))&0x01)<<23)
|
|
#define SDR0_SDSTP2_P1R64E_DECODE(n) ((((unsigned long)(n))>>23)&0x01)
|
|
#define SDR0_SDSTP2_P1XFS_MASK 0x00600000
|
|
#define SDR0_SDSTP2_P1XFS_100_133 0x00000000
|
|
#define SDR0_SDSTP2_P1XFS_66_100 0x00200000
|
|
#define SDR0_SDSTP2_P1XFS_50_66 0x00400000
|
|
#define SDR0_SDSTP2_P1XFS_0_50 0x00600000
|
|
#define SDR0_SDSTP2_P1XFS_ENCODE(n) ((((unsigned long)(n))&0x03)<<21)
|
|
#define SDR0_SDSTP2_P1XFS_DECODE(n) ((((unsigned long)(n))>>21)&0x03)
|
|
#define SDR0_SDSTP2_P2AE_MASK 0x00040000
|
|
#define SDR0_SDSTP2_P2AE_DISABLE 0x00000000
|
|
#define SDR0_SDSTP2_P2AE_ENABLE 0x00040000
|
|
#define SDR0_SDSTP2_P2AE_ENCODE(n) ((((unsigned long)(n))&0x01)<<18)
|
|
#define SDR0_SDSTP2_P2AE_DECODE(n) ((((unsigned long)(n))>>18)&0x01)
|
|
#define SDR0_SDSTP2_P2HCE_MASK 0x00020000
|
|
#define SDR0_SDSTP2_P2HCE_DISABLE 0x00000000
|
|
#define SDR0_SDSTP2_P2HCE_ENABLE 0x00020000
|
|
#define SDR0_SDSTP2_P2HCE_ENCODE(n) ((((unsigned long)(n))&0x01)<<17)
|
|
#define SDR0_SDSTP2_P2HCE_DECODE(n) ((((unsigned long)(n))>>17)&0x01)
|
|
#define SDR0_SDSTP2_P2ISE_MASK 0x00010000
|
|
#define SDR0_SDSTP2_P2ISE_DISABLE 0x00000000
|
|
#define SDR0_SDSTP2_P2ISE_ENABLE 0x00010000
|
|
#define SDR0_SDSTP2_P2ISE_ENCODE(n) ((((unsigned long)(n))&0x01)<<16)
|
|
#define SDR0_SDSTP2_P2ISE_DECODE(n) ((((unsigned long)(n))>>16)&0x01)
|
|
#define SDR0_SDSTP2_P2CWE_MASK 0x00008000
|
|
#define SDR0_SDSTP2_P2CWE_DISABLE 0x00000000
|
|
#define SDR0_SDSTP2_P2CWE_ENABLE 0x00008000
|
|
#define SDR0_SDSTP2_P2CWE_ENCODE(n) ((((unsigned long)(n))&0x01)<<15)
|
|
#define SDR0_SDSTP2_P2CWE_DECODE(n) ((((unsigned long)(n))>>15)&0x01)
|
|
#define SDR0_SDSTP2_P2PIM_MASK 0x00007800
|
|
#define SDR0_SDSTP2_P2PIM_ENCODE(n) ((((unsigned long)(n))&0x0F)<<11)
|
|
#define SDR0_SDSTP2_P2PIM_DECODE(n) ((((unsigned long)(n))>>11)&0x0F)
|
|
#define SDR0_SDSTP2_P2XFS_MASK 0x00000300
|
|
#define SDR0_SDSTP2_P2XFS_100_133 0x00000000
|
|
#define SDR0_SDSTP2_P2XFS_66_100 0x00000100
|
|
#define SDR0_SDSTP2_P2XFS_50_66 0x00000200
|
|
#define SDR0_SDSTP2_P2XFS_0_50 0x00000100
|
|
#define SDR0_SDSTP2_P2XFS_ENCODE(n) ((((unsigned long)(n))&0x03)<<8)
|
|
#define SDR0_SDSTP2_P2XFS_DECODE(n) ((((unsigned long)(n))>>8)&0x03)
|
|
|
|
#define SDR0_SDSTP3 0x0023
|
|
|
|
#define SDR0_PINSTP 0x0040
|
|
#define SDR0_PINSTP_BOOTSTRAP_MASK 0xC0000000 /* Strap Bits */
|
|
#define SDR0_PINSTP_BOOTSTRAP_SETTINGS0 0x00000000 /* Default strap settings 0 (EBC boot) */
|
|
#define SDR0_PINSTP_BOOTSTRAP_SETTINGS1 0x40000000 /* Default strap settings 1 (PCI boot) */
|
|
#define SDR0_PINSTP_BOOTSTRAP_IIC_54_EN 0x80000000 /* Serial Device Enabled - Addr = 0x54 */
|
|
#define SDR0_PINSTP_BOOTSTRAP_IIC_50_EN 0xC0000000 /* Serial Device Enabled - Addr = 0x50 */
|
|
#define SDR0_SDCS 0x0060
|
|
#define SDR0_ECID0 0x0080
|
|
#define SDR0_ECID1 0x0081
|
|
#define SDR0_ECID2 0x0082
|
|
#define SDR0_JTAG 0x00C0
|
|
|
|
#define SDR0_DDR0 0x00E1
|
|
#define SDR0_DDR0_DPLLRST 0x80000000
|
|
#define SDR0_DDR0_DDRM_MASK 0x60000000
|
|
#define SDR0_DDR0_DDRM_DDR1 0x20000000
|
|
#define SDR0_DDR0_DDRM_DDR2 0x40000000
|
|
#define SDR0_DDR0_DDRM_ENCODE(n) ((((unsigned long)(n))&0x03)<<29)
|
|
#define SDR0_DDR0_DDRM_DECODE(n) ((((unsigned long)(n))>>29)&0x03)
|
|
#define SDR0_DDR0_TUNE_ENCODE(n) ((((unsigned long)(n))&0x2FF)<<0)
|
|
#define SDR0_DDR0_TUNE_DECODE(n) ((((unsigned long)(n))>>0)&0x2FF)
|
|
|
|
#define SDR0_UART0 0x0120
|
|
#define SDR0_UART1 0x0121
|
|
#define SDR0_UART2 0x0122
|
|
#define SDR0_UARTX_UXICS_MASK 0xF0000000
|
|
#define SDR0_UARTX_UXICS_PLB 0x20000000
|
|
#define SDR0_UARTX_UXEC_MASK 0x00800000
|
|
#define SDR0_UARTX_UXEC_INT 0x00000000
|
|
#define SDR0_UARTX_UXEC_EXT 0x00800000
|
|
#define SDR0_UARTX_UXDIV_MASK 0x000000FF
|
|
#define SDR0_UARTX_UXDIV_ENCODE(n) ((((unsigned long)(n))&0xFF)<<0)
|
|
#define SDR0_UARTX_UXDIV_DECODE(n) ((((((unsigned long)(n))>>0)-1)&0xFF)+1)
|
|
|
|
#define SDR0_CP440 0x0180
|
|
#define SDR0_CP440_ERPN_MASK 0x30000000
|
|
#define SDR0_CP440_ERPN_MASK_HI 0x3000
|
|
#define SDR0_CP440_ERPN_MASK_LO 0x0000
|
|
#define SDR0_CP440_ERPN_EBC 0x10000000
|
|
#define SDR0_CP440_ERPN_EBC_HI 0x1000
|
|
#define SDR0_CP440_ERPN_EBC_LO 0x0000
|
|
#define SDR0_CP440_ERPN_PCI 0x20000000
|
|
#define SDR0_CP440_ERPN_PCI_HI 0x2000
|
|
#define SDR0_CP440_ERPN_PCI_LO 0x0000
|
|
#define SDR0_CP440_ERPN_ENCODE(n) ((((unsigned long)(n))&0x03)<<28)
|
|
#define SDR0_CP440_ERPN_DECODE(n) ((((unsigned long)(n))>>28)&0x03)
|
|
#define SDR0_CP440_NTO1_MASK 0x00000002
|
|
#define SDR0_CP440_NTO1_NTOP 0x00000000
|
|
#define SDR0_CP440_NTO1_NTO1 0x00000002
|
|
#define SDR0_CP440_NTO1_ENCODE(n) ((((unsigned long)(n))&0x01)<<1)
|
|
#define SDR0_CP440_NTO1_DECODE(n) ((((unsigned long)(n))>>1)&0x01)
|
|
|
|
#define SDR0_XCR0 0x01C0
|
|
#define SDR0_XCR1 0x01C3
|
|
#define SDR0_XCR2 0x01C6
|
|
#define SDR0_XCRn_PAE_MASK 0x80000000
|
|
#define SDR0_XCRn_PAE_DISABLE 0x00000000
|
|
#define SDR0_XCRn_PAE_ENABLE 0x80000000
|
|
#define SDR0_XCRn_PAE_ENCODE(n) ((((unsigned long)(n))&0x01)<<31)
|
|
#define SDR0_XCRn_PAE_DECODE(n) ((((unsigned long)(n))>>31)&0x01)
|
|
#define SDR0_XCRn_PHCE_MASK 0x40000000
|
|
#define SDR0_XCRn_PHCE_DISABLE 0x00000000
|
|
#define SDR0_XCRn_PHCE_ENABLE 0x40000000
|
|
#define SDR0_XCRn_PHCE_ENCODE(n) ((((unsigned long)(n))&0x01)<<30)
|
|
#define SDR0_XCRn_PHCE_DECODE(n) ((((unsigned long)(n))>>30)&0x01)
|
|
#define SDR0_XCRn_PISE_MASK 0x20000000
|
|
#define SDR0_XCRn_PISE_DISABLE 0x00000000
|
|
#define SDR0_XCRn_PISE_ENABLE 0x20000000
|
|
#define SDR0_XCRn_PISE_ENCODE(n) ((((unsigned long)(n))&0x01)<<29)
|
|
#define SDR0_XCRn_PISE_DECODE(n) ((((unsigned long)(n))>>29)&0x01)
|
|
#define SDR0_XCRn_PCWE_MASK 0x10000000
|
|
#define SDR0_XCRn_PCWE_DISABLE 0x00000000
|
|
#define SDR0_XCRn_PCWE_ENABLE 0x10000000
|
|
#define SDR0_XCRn_PCWE_ENCODE(n) ((((unsigned long)(n))&0x01)<<28)
|
|
#define SDR0_XCRn_PCWE_DECODE(n) ((((unsigned long)(n))>>28)&0x01)
|
|
#define SDR0_XCRn_PPIM_MASK 0x0F000000
|
|
#define SDR0_XCRn_PPIM_ENCODE(n) ((((unsigned long)(n))&0x0F)<<24)
|
|
#define SDR0_XCRn_PPIM_DECODE(n) ((((unsigned long)(n))>>24)&0x0F)
|
|
#define SDR0_XCRn_PR64E_MASK 0x00800000
|
|
#define SDR0_XCRn_PR64E_DISABLE 0x00000000
|
|
#define SDR0_XCRn_PR64E_ENABLE 0x00800000
|
|
#define SDR0_XCRn_PR64E_ENCODE(n) ((((unsigned long)(n))&0x01)<<23)
|
|
#define SDR0_XCRn_PR64E_DECODE(n) ((((unsigned long)(n))>>23)&0x01)
|
|
#define SDR0_XCRn_PXFS_MASK 0x00600000
|
|
#define SDR0_XCRn_PXFS_100_133 0x00000000
|
|
#define SDR0_XCRn_PXFS_66_100 0x00200000
|
|
#define SDR0_XCRn_PXFS_50_66 0x00400000
|
|
#define SDR0_XCRn_PXFS_0_33 0x00600000
|
|
#define SDR0_XCRn_PXFS_ENCODE(n) ((((unsigned long)(n))&0x03)<<21)
|
|
#define SDR0_XCRn_PXFS_DECODE(n) ((((unsigned long)(n))>>21)&0x03)
|
|
|
|
#define SDR0_XPLLC0 0x01C1
|
|
#define SDR0_XPLLD0 0x01C2
|
|
#define SDR0_XPLLC1 0x01C4
|
|
#define SDR0_XPLLD1 0x01C5
|
|
#define SDR0_XPLLC2 0x01C7
|
|
#define SDR0_XPLLD2 0x01C8
|
|
#define SDR0_SRST 0x0200
|
|
#define SDR0_SLPIPE 0x0220
|
|
|
|
#define SDR0_AMP0 0x0240
|
|
#define SDR0_AMP0_PRIORITY 0xFFFF0000
|
|
#define SDR0_AMP0_ALTERNATE_PRIORITY 0x0000FF00
|
|
#define SDR0_AMP0_RESERVED_BITS_MASK 0x000000FF
|
|
|
|
#define SDR0_AMP1 0x0241
|
|
#define SDR0_AMP1_PRIORITY 0xFC000000
|
|
#define SDR0_AMP1_ALTERNATE_PRIORITY 0x0000E000
|
|
#define SDR0_AMP1_RESERVED_BITS_MASK 0x03FF1FFF
|
|
|
|
#define SDR0_MIRQ0 0x0260
|
|
#define SDR0_MIRQ1 0x0261
|
|
#define SDR0_MALTBL 0x0280
|
|
#define SDR0_MALRBL 0x02A0
|
|
#define SDR0_MALTBS 0x02C0
|
|
#define SDR0_MALRBS 0x02E0
|
|
|
|
/* Reserved for Customer Use */
|
|
#define SDR0_CUST0 0x4000
|
|
#define SDR0_CUST0_AUTONEG_MASK 0x8000000
|
|
#define SDR0_CUST0_NO_AUTONEG 0x0000000
|
|
#define SDR0_CUST0_AUTONEG 0x8000000
|
|
#define SDR0_CUST0_ETH_FORCE_MASK 0x6000000
|
|
#define SDR0_CUST0_ETH_FORCE_10MHZ 0x0000000
|
|
#define SDR0_CUST0_ETH_FORCE_100MHZ 0x2000000
|
|
#define SDR0_CUST0_ETH_FORCE_1000MHZ 0x4000000
|
|
#define SDR0_CUST0_ETH_DUPLEX_MASK 0x1000000
|
|
#define SDR0_CUST0_ETH_HALF_DUPLEX 0x0000000
|
|
#define SDR0_CUST0_ETH_FULL_DUPLEX 0x1000000
|
|
|
|
#define SDR0_SDSTP4 0x4001
|
|
#define SDR0_CUST1 0x4002
|
|
#define SDR0_SDSTP5 0x4003
|
|
#define SDR0_CUST2 0x4004
|
|
#define SDR0_SDSTP6 0x4005
|
|
#define SDR0_CUST3 0x4006
|
|
#define SDR0_SDSTP7 0x4007
|
|
|
|
#define SDR0_PFC0 0x4100
|
|
#define SDR0_PFC0_GPIO_0 0x80000000
|
|
#define SDR0_PFC0_PCIX0REQ2_N 0x00000000
|
|
#define SDR0_PFC0_GPIO_1 0x40000000
|
|
#define SDR0_PFC0_PCIX0REQ3_N 0x00000000
|
|
#define SDR0_PFC0_GPIO_2 0x20000000
|
|
#define SDR0_PFC0_PCIX0GNT2_N 0x00000000
|
|
#define SDR0_PFC0_GPIO_3 0x10000000
|
|
#define SDR0_PFC0_PCIX0GNT3_N 0x00000000
|
|
#define SDR0_PFC0_GPIO_4 0x08000000
|
|
#define SDR0_PFC0_PCIX1REQ2_N 0x00000000
|
|
#define SDR0_PFC0_GPIO_5 0x04000000
|
|
#define SDR0_PFC0_PCIX1REQ3_N 0x00000000
|
|
#define SDR0_PFC0_GPIO_6 0x02000000
|
|
#define SDR0_PFC0_PCIX1GNT2_N 0x00000000
|
|
#define SDR0_PFC0_GPIO_7 0x01000000
|
|
#define SDR0_PFC0_PCIX1GNT3_N 0x00000000
|
|
#define SDR0_PFC0_GPIO_8 0x00800000
|
|
#define SDR0_PFC0_PERREADY 0x00000000
|
|
#define SDR0_PFC0_GPIO_9 0x00400000
|
|
#define SDR0_PFC0_PERCS1_N 0x00000000
|
|
#define SDR0_PFC0_GPIO_10 0x00200000
|
|
#define SDR0_PFC0_PERCS2_N 0x00000000
|
|
#define SDR0_PFC0_GPIO_11 0x00100000
|
|
#define SDR0_PFC0_IRQ0 0x00000000
|
|
#define SDR0_PFC0_GPIO_12 0x00080000
|
|
#define SDR0_PFC0_IRQ1 0x00000000
|
|
#define SDR0_PFC0_GPIO_13 0x00040000
|
|
#define SDR0_PFC0_IRQ2 0x00000000
|
|
#define SDR0_PFC0_GPIO_14 0x00020000
|
|
#define SDR0_PFC0_IRQ3 0x00000000
|
|
#define SDR0_PFC0_GPIO_15 0x00010000
|
|
#define SDR0_PFC0_IRQ4 0x00000000
|
|
#define SDR0_PFC0_GPIO_16 0x00008000
|
|
#define SDR0_PFC0_IRQ5 0x00000000
|
|
#define SDR0_PFC0_GPIO_17 0x00004000
|
|
#define SDR0_PFC0_PERBE0_N 0x00000000
|
|
#define SDR0_PFC0_GPIO_18 0x00002000
|
|
#define SDR0_PFC0_PCI0GNT0_N 0x00000000
|
|
#define SDR0_PFC0_GPIO_19 0x00001000
|
|
#define SDR0_PFC0_PCI0GNT1_N 0x00000000
|
|
#define SDR0_PFC0_GPIO_20 0x00000800
|
|
#define SDR0_PFC0_PCI0REQ0_N 0x00000000
|
|
#define SDR0_PFC0_GPIO_21 0x00000400
|
|
#define SDR0_PFC0_PCI0REQ1_N 0x00000000
|
|
#define SDR0_PFC0_GPIO_22 0x00000200
|
|
#define SDR0_PFC0_PCI1GNT0_N 0x00000000
|
|
#define SDR0_PFC0_GPIO_23 0x00000100
|
|
#define SDR0_PFC0_PCI1GNT1_N 0x00000000
|
|
#define SDR0_PFC0_GPIO_24 0x00000080
|
|
#define SDR0_PFC0_PCI1REQ0_N 0x00000000
|
|
#define SDR0_PFC0_GPIO_25 0x00000040
|
|
#define SDR0_PFC0_PCI1REQ1_N 0x00000000
|
|
#define SDR0_PFC0_GPIO_26 0x00000020
|
|
#define SDR0_PFC0_PCI2GNT0_N 0x00000000
|
|
#define SDR0_PFC0_GPIO_27 0x00000010
|
|
#define SDR0_PFC0_PCI2GNT1_N 0x00000000
|
|
#define SDR0_PFC0_GPIO_28 0x00000008
|
|
#define SDR0_PFC0_PCI2REQ0_N 0x00000000
|
|
#define SDR0_PFC0_GPIO_29 0x00000004
|
|
#define SDR0_PFC0_PCI2REQ1_N 0x00000000
|
|
#define SDR0_PFC0_GPIO_30 0x00000002
|
|
#define SDR0_PFC0_UART1RX 0x00000000
|
|
#define SDR0_PFC0_GPIO_31 0x00000001
|
|
#define SDR0_PFC0_UART1TX 0x00000000
|
|
|
|
#define SDR0_PFC1 0x4101
|
|
#define SDR0_PFC1_UART1_CTS_RTS_MASK 0x02000000
|
|
#define SDR0_PFC1_UART1_DSR_DTR 0x00000000
|
|
#define SDR0_PFC1_UART1_CTS_RTS 0x02000000
|
|
#define SDR0_PFC1_UART2_IN_SERVICE_MASK 0x01000000
|
|
#define SDR0_PFC1_UART2_NOT_IN_SERVICE 0x00000000
|
|
#define SDR0_PFC1_UART2_IN_SERVICE 0x01000000
|
|
#define SDR0_PFC1_ETH_GIGA_MASK 0x00200000
|
|
#define SDR0_PFC1_ETH_10_100 0x00000000
|
|
#define SDR0_PFC1_ETH_GIGA 0x00200000
|
|
#define SDR0_PFC1_ETH_GIGA_ENCODE(n) ((((unsigned long)(n))&0x1)<<21)
|
|
#define SDR0_PFC1_ETH_GIGA_DECODE(n) ((((unsigned long)(n))>>21)&0x01)
|
|
#define SDR0_PFC1_CPU_TRACE_MASK 0x00180000 /* $218C */
|
|
#define SDR0_PFC1_CPU_NO_TRACE 0x00000000
|
|
#define SDR0_PFC1_CPU_TRACE 0x00080000
|
|
#define SDR0_PFC1_CPU_TRACE_ENCODE(n) ((((unsigned long)(n))&0x3)<<19) /* $218C */
|
|
#define SDR0_PFC1_CPU_TRACE_DECODE(n) ((((unsigned long)(n))>>19)&0x03) /* $218C */
|
|
|
|
#define SDR0_MFR 0x4300
|
|
#endif /* CONFIG_440SPE */
|
|
|
|
|
|
#define SDR0_SDCS_SDD (0x80000000 >> 31)
|
|
|
|
#if defined(CONFIG_440GP)
|
|
#define CPC0_STRP1_PAE_MASK (0x80000000 >> 11)
|
|
#define CPC0_STRP1_PISE_MASK (0x80000000 >> 13)
|
|
#endif /* defined(CONFIG_440GP) */
|
|
#if defined(CONFIG_440GX) || defined(CONFIG_440SP)
|
|
#define SDR0_SDSTP1_PAE_MASK (0x80000000 >> 13)
|
|
#define SDR0_SDSTP1_PISE_MASK (0x80000000 >> 15)
|
|
#endif /* defined(CONFIG_440GX) || defined(CONFIG_440SP) */
|
|
#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
|
|
defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
|
|
#define SDR0_SDSTP1_PAE_MASK (0x80000000 >> 21)
|
|
#define SDR0_SDSTP1_PAME_MASK (0x80000000 >> 27)
|
|
#endif /* defined(CONFIG_440EP) || defined(CONFIG_440GR) */
|
|
|
|
#define SDR0_UARTX_UXICS_MASK 0xF0000000
|
|
#define SDR0_UARTX_UXICS_PLB 0x20000000
|
|
#define SDR0_UARTX_UXEC_MASK 0x00800000
|
|
#define SDR0_UARTX_UXEC_INT 0x00000000
|
|
#define SDR0_UARTX_UXEC_EXT 0x00800000
|
|
#define SDR0_UARTX_UXDTE_MASK 0x00400000
|
|
#define SDR0_UARTX_UXDTE_DISABLE 0x00000000
|
|
#define SDR0_UARTX_UXDTE_ENABLE 0x00400000
|
|
#define SDR0_UARTX_UXDRE_MASK 0x00200000
|
|
#define SDR0_UARTX_UXDRE_DISABLE 0x00000000
|
|
#define SDR0_UARTX_UXDRE_ENABLE 0x00200000
|
|
#define SDR0_UARTX_UXDC_MASK 0x00100000
|
|
#define SDR0_UARTX_UXDC_NOTCLEARED 0x00000000
|
|
#define SDR0_UARTX_UXDC_CLEARED 0x00100000
|
|
#define SDR0_UARTX_UXDIV_MASK 0x000000FF
|
|
#define SDR0_UARTX_UXDIV_ENCODE(n) ((((unsigned long)(n))&0xFF)<<0)
|
|
#define SDR0_UARTX_UXDIV_DECODE(n) ((((((unsigned long)(n))>>0)-1)&0xFF)+1)
|
|
|
|
#define SDR0_CPU440_EARV_MASK 0x30000000
|
|
#define SDR0_CPU440_EARV_EBC 0x10000000
|
|
#define SDR0_CPU440_EARV_PCI 0x20000000
|
|
#define SDR0_CPU440_EARV_ENCODE(n) ((((unsigned long)(n))&0x03)<<28)
|
|
#define SDR0_CPU440_EARV_DECODE(n) ((((unsigned long)(n))>>28)&0x03)
|
|
#define SDR0_CPU440_NTO1_MASK 0x00000002
|
|
#define SDR0_CPU440_NTO1_NTOP 0x00000000
|
|
#define SDR0_CPU440_NTO1_NTO1 0x00000002
|
|
#define SDR0_CPU440_NTO1_ENCODE(n) ((((unsigned long)(n))&0x01)<<1)
|
|
#define SDR0_CPU440_NTO1_DECODE(n) ((((unsigned long)(n))>>1)&0x01)
|
|
|
|
#define SDR0_XCR_PAE_MASK 0x80000000
|
|
#define SDR0_XCR_PAE_DISABLE 0x00000000
|
|
#define SDR0_XCR_PAE_ENABLE 0x80000000
|
|
#define SDR0_XCR_PAE_ENCODE(n) ((((unsigned long)(n))&0x01)<<31)
|
|
#define SDR0_XCR_PAE_DECODE(n) ((((unsigned long)(n))>>31)&0x01)
|
|
#define SDR0_XCR_PHCE_MASK 0x40000000
|
|
#define SDR0_XCR_PHCE_DISABLE 0x00000000
|
|
#define SDR0_XCR_PHCE_ENABLE 0x40000000
|
|
#define SDR0_XCR_PHCE_ENCODE(n) ((((unsigned long)(n))&0x01)<<30)
|
|
#define SDR0_XCR_PHCE_DECODE(n) ((((unsigned long)(n))>>30)&0x01)
|
|
#define SDR0_XCR_PISE_MASK 0x20000000
|
|
#define SDR0_XCR_PISE_DISABLE 0x00000000
|
|
#define SDR0_XCR_PISE_ENABLE 0x20000000
|
|
#define SDR0_XCR_PISE_ENCODE(n) ((((unsigned long)(n))&0x01)<<29)
|
|
#define SDR0_XCR_PISE_DECODE(n) ((((unsigned long)(n))>>29)&0x01)
|
|
#define SDR0_XCR_PCWE_MASK 0x10000000
|
|
#define SDR0_XCR_PCWE_DISABLE 0x00000000
|
|
#define SDR0_XCR_PCWE_ENABLE 0x10000000
|
|
#define SDR0_XCR_PCWE_ENCODE(n) ((((unsigned long)(n))&0x01)<<28)
|
|
#define SDR0_XCR_PCWE_DECODE(n) ((((unsigned long)(n))>>28)&0x01)
|
|
#define SDR0_XCR_PPIM_MASK 0x0F000000
|
|
#define SDR0_XCR_PPIM_ENCODE(n) ((((unsigned long)(n))&0x0F)<<24)
|
|
#define SDR0_XCR_PPIM_DECODE(n) ((((unsigned long)(n))>>24)&0x0F)
|
|
#define SDR0_XCR_PR64E_MASK 0x00800000
|
|
#define SDR0_XCR_PR64E_DISABLE 0x00000000
|
|
#define SDR0_XCR_PR64E_ENABLE 0x00800000
|
|
#define SDR0_XCR_PR64E_ENCODE(n) ((((unsigned long)(n))&0x01)<<23)
|
|
#define SDR0_XCR_PR64E_DECODE(n) ((((unsigned long)(n))>>23)&0x01)
|
|
#define SDR0_XCR_PXFS_MASK 0x00600000
|
|
#define SDR0_XCR_PXFS_HIGH 0x00000000
|
|
#define SDR0_XCR_PXFS_MED 0x00200000
|
|
#define SDR0_XCR_PXFS_LOW 0x00400000
|
|
#define SDR0_XCR_PXFS_ENCODE(n) ((((unsigned long)(n))&0x03)<<21)
|
|
#define SDR0_XCR_PXFS_DECODE(n) ((((unsigned long)(n))>>21)&0x03)
|
|
#define SDR0_XCR_PDM_MASK 0x00000040
|
|
#define SDR0_XCR_PDM_MULTIPOINT 0x00000000
|
|
#define SDR0_XCR_PDM_P2P 0x00000040
|
|
#define SDR0_XCR_PDM_ENCODE(n) ((((unsigned long)(n))&0x01)<<19)
|
|
#define SDR0_XCR_PDM_DECODE(n) ((((unsigned long)(n))>>19)&0x01)
|
|
|
|
#define SDR0_PFC0_UART1_DSR_CTS_EN_MASK 0x00030000
|
|
#define SDR0_PFC0_GEIE_MASK 0x00003E00
|
|
#define SDR0_PFC0_GEIE_TRE 0x00003E00
|
|
#define SDR0_PFC0_GEIE_NOTRE 0x00000000
|
|
#define SDR0_PFC0_TRE_MASK 0x00000100
|
|
#define SDR0_PFC0_TRE_DISABLE 0x00000000
|
|
#define SDR0_PFC0_TRE_ENABLE 0x00000100
|
|
#define SDR0_PFC0_TRE_ENCODE(n) ((((unsigned long)(n))&0x01)<<8)
|
|
#define SDR0_PFC0_TRE_DECODE(n) ((((unsigned long)(n))>>8)&0x01)
|
|
|
|
#define SDR0_PFC1_UART1_DSR_CTS_MASK 0x02000000
|
|
#define SDR0_PFC1_EPS_MASK 0x01C00000
|
|
#define SDR0_PFC1_EPS_GROUP0 0x00000000
|
|
#define SDR0_PFC1_EPS_GROUP1 0x00400000
|
|
#define SDR0_PFC1_EPS_GROUP2 0x00800000
|
|
#define SDR0_PFC1_EPS_GROUP3 0x00C00000
|
|
#define SDR0_PFC1_EPS_GROUP4 0x01000000
|
|
#define SDR0_PFC1_EPS_GROUP5 0x01400000
|
|
#define SDR0_PFC1_EPS_GROUP6 0x01800000
|
|
#define SDR0_PFC1_EPS_GROUP7 0x01C00000
|
|
#define SDR0_PFC1_EPS_ENCODE(n) ((((unsigned long)(n))&0x07)<<22)
|
|
#define SDR0_PFC1_EPS_DECODE(n) ((((unsigned long)(n))>>22)&0x07)
|
|
#define SDR0_PFC1_RMII_MASK 0x00200000
|
|
#define SDR0_PFC1_RMII_100MBIT 0x00000000
|
|
#define SDR0_PFC1_RMII_10MBIT 0x00200000
|
|
#define SDR0_PFC1_RMII_ENCODE(n) ((((unsigned long)(n))&0x01)<<21)
|
|
#define SDR0_PFC1_RMII_DECODE(n) ((((unsigned long)(n))>>21)&0x01)
|
|
#define SDR0_PFC1_CTEMS_MASK 0x00100000
|
|
#define SDR0_PFC1_CTEMS_EMS 0x00000000
|
|
#define SDR0_PFC1_CTEMS_CPUTRACE 0x00100000
|
|
|
|
#define SDR0_MFR_TAH0_MASK 0x80000000
|
|
#define SDR0_MFR_TAH0_ENABLE 0x00000000
|
|
#define SDR0_MFR_TAH0_DISABLE 0x80000000
|
|
#define SDR0_MFR_TAH1_MASK 0x40000000
|
|
#define SDR0_MFR_TAH1_ENABLE 0x00000000
|
|
#define SDR0_MFR_TAH1_DISABLE 0x40000000
|
|
#define SDR0_MFR_PCM_MASK 0x20000000
|
|
#define SDR0_MFR_PCM_PPC440GX 0x00000000
|
|
#define SDR0_MFR_PCM_PPC440GP 0x20000000
|
|
#define SDR0_MFR_ECS_MASK 0x10000000
|
|
#define SDR0_MFR_ECS_INTERNAL 0x10000000
|
|
|
|
#define SDR0_MFR_ETH0_CLK_SEL 0x08000000 /* Ethernet0 Clock Select */
|
|
#define SDR0_MFR_ETH1_CLK_SEL 0x04000000 /* Ethernet1 Clock Select */
|
|
#define SDR0_MFR_ZMII_MODE_MASK 0x03000000 /* ZMII Mode Mask */
|
|
#define SDR0_MFR_ZMII_MODE_MII 0x00000000 /* ZMII Mode MII */
|
|
#define SDR0_MFR_ZMII_MODE_SMII 0x01000000 /* ZMII Mode SMII */
|
|
#define SDR0_MFR_ZMII_MODE_RMII_10M 0x02000000 /* ZMII Mode RMII - 10 Mbs */
|
|
#define SDR0_MFR_ZMII_MODE_RMII_100M 0x03000000 /* ZMII Mode RMII - 100 Mbs */
|
|
#define SDR0_MFR_ZMII_MODE_BIT0 0x02000000 /* ZMII Mode Bit0 */
|
|
#define SDR0_MFR_ZMII_MODE_BIT1 0x01000000 /* ZMII Mode Bit1 */
|
|
#define SDR0_MFR_ERRATA3_EN0 0x00800000
|
|
#define SDR0_MFR_ERRATA3_EN1 0x00400000
|
|
#if defined(CONFIG_440GX) /* test-only: only 440GX or 440SPE??? */
|
|
#define SDR0_MFR_PKT_REJ_MASK 0x00300000 /* Pkt Rej. Enable Mask */
|
|
#define SDR0_MFR_PKT_REJ_EN 0x00300000 /* Pkt Rej. Enable on both EMAC3 0-1 */
|
|
#define SDR0_MFR_PKT_REJ_EN0 0x00200000 /* Pkt Rej. Enable on EMAC3(0) */
|
|
#define SDR0_MFR_PKT_REJ_EN1 0x00100000 /* Pkt Rej. Enable on EMAC3(1) */
|
|
#define SDR0_MFR_PKT_REJ_POL 0x00080000 /* Packet Reject Polarity */
|
|
#endif
|
|
|
|
#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
|
|
#define SDR0_PFC1_EPS_ENCODE(n) ((((unsigned long)(n))&0x07)<<22)
|
|
#define SDR0_PFC1_EPS_DECODE(n) ((((unsigned long)(n))>>22)&0x07)
|
|
#define SDR0_PFC2_EPS_ENCODE(n) ((((unsigned long)(n))&0x07)<<29)
|
|
#define SDR0_PFC2_EPS_DECODE(n) ((((unsigned long)(n))>>29)&0x07)
|
|
#endif
|
|
|
|
#define SDR0_MFR_ECS_MASK 0x10000000
|
|
#define SDR0_MFR_ECS_INTERNAL 0x10000000
|
|
|
|
#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
|
|
#define SDR0_SRST0 0x200
|
|
#define SDR0_SRST0_BGO 0x80000000 /* PLB to OPB bridge */
|
|
#define SDR0_SRST0_PLB4 0x40000000 /* PLB4 arbiter */
|
|
#define SDR0_SRST0_EBC 0x20000000 /* External bus controller */
|
|
#define SDR0_SRST0_OPB 0x10000000 /* OPB arbiter */
|
|
#define SDR0_SRST0_UART0 0x08000000 /* Universal asynchronous receiver/transmitter 0 */
|
|
#define SDR0_SRST0_UART1 0x04000000 /* Universal asynchronous receiver/transmitter 1 */
|
|
#define SDR0_SRST0_IIC0 0x02000000 /* Inter integrated circuit 0 */
|
|
#define SDR0_SRST0_USB2H 0x01000000 /* USB2.0 Host */
|
|
#define SDR0_SRST0_GPIO 0x00800000 /* General purpose I/O */
|
|
#define SDR0_SRST0_GPT 0x00400000 /* General purpose timer */
|
|
#define SDR0_SRST0_DMC 0x00200000 /* DDR SDRAM memory controller */
|
|
#define SDR0_SRST0_PCI 0x00100000 /* PCI */
|
|
#define SDR0_SRST0_EMAC0 0x00080000 /* Ethernet media access controller 0 */
|
|
#define SDR0_SRST0_EMAC1 0x00040000 /* Ethernet media access controller 1 */
|
|
#define SDR0_SRST0_CPM0 0x00020000 /* Clock and power management */
|
|
#define SDR0_SRST0_ZMII 0x00010000 /* ZMII bridge */
|
|
#define SDR0_SRST0_UIC0 0x00008000 /* Universal interrupt controller 0 */
|
|
#define SDR0_SRST0_UIC1 0x00004000 /* Universal interrupt controller 1 */
|
|
#define SDR0_SRST0_IIC1 0x00002000 /* Inter integrated circuit 1 */
|
|
#define SDR0_SRST0_SCP 0x00001000 /* Serial communications port */
|
|
#define SDR0_SRST0_BGI 0x00000800 /* OPB to PLB bridge */
|
|
#define SDR0_SRST0_DMA 0x00000400 /* Direct memory access controller */
|
|
#define SDR0_SRST0_DMAC 0x00000200 /* DMA channel */
|
|
#define SDR0_SRST0_MAL 0x00000100 /* Media access layer */
|
|
#define SDR0_SRST0_USB2D 0x00000080 /* USB2.0 device */
|
|
#define SDR0_SRST0_GPTR 0x00000040 /* General purpose timer */
|
|
#define SDR0_SRST0_P4P3 0x00000010 /* PLB4 to PLB3 bridge */
|
|
#define SDR0_SRST0_P3P4 0x00000008 /* PLB3 to PLB4 bridge */
|
|
#define SDR0_SRST0_PLB3 0x00000004 /* PLB3 arbiter */
|
|
#define SDR0_SRST0_UART2 0x00000002 /* Universal asynchronous receiver/transmitter 2 */
|
|
#define SDR0_SRST0_UART3 0x00000001 /* Universal asynchronous receiver/transmitter 3 */
|
|
|
|
#define SDR0_SRST1 0x201
|
|
#define SDR0_SRST1_NDFC 0x80000000 /* Nand flash controller */
|
|
#define SDR0_SRST1_OPBA1 0x40000000 /* OPB Arbiter attached to PLB4 */
|
|
#define SDR0_SRST1_P4OPB0 0x20000000 /* PLB4 to OPB Bridge0 */
|
|
#define SDR0_SRST1_PLB42OPB0 SDR0_SRST1_P4OPB0
|
|
#define SDR0_SRST1_DMA4 0x10000000 /* DMA to PLB4 */
|
|
#define SDR0_SRST1_DMA4CH 0x08000000 /* DMA Channel to PLB4 */
|
|
#define SDR0_SRST1_OPBA2 0x04000000 /* OPB Arbiter attached to PLB4 USB 2.0 Host */
|
|
#define SDR0_SRST1_OPB2PLB40 0x02000000 /* OPB to PLB4 Bridge attached to USB 2.0 Host */
|
|
#define SDR0_SRST1_PLB42OPB1 0x01000000 /* PLB4 to OPB Bridge attached to USB 2.0 Host */
|
|
#define SDR0_SRST1_CPM1 0x00800000 /* Clock and Power management 1 */
|
|
#define SDR0_SRST1_UIC2 0x00400000 /* Universal Interrupt Controller 2 */
|
|
#define SDR0_SRST1_CRYP0 0x00200000 /* Security Engine */
|
|
#define SDR0_SRST1_USB20PHY 0x00100000 /* USB 2.0 Phy */
|
|
#define SDR0_SRST1_USB2HUTMI 0x00080000 /* USB 2.0 Host UTMI Interface */
|
|
#define SDR0_SRST1_USB2HPHY 0x00040000 /* USB 2.0 Host Phy Interface */
|
|
#define SDR0_SRST1_SRAM0 0x00020000 /* Internal SRAM Controller */
|
|
#define SDR0_SRST1_RGMII0 0x00010000 /* RGMII Bridge */
|
|
#define SDR0_SRST1_ETHPLL 0x00008000 /* Ethernet PLL */
|
|
#define SDR0_SRST1_FPU 0x00004000 /* Floating Point Unit */
|
|
#define SDR0_SRST1_KASU0 0x00002000 /* Kasumi Engine */
|
|
|
|
#else
|
|
|
|
#define SDR0_SRST_BGO 0x80000000
|
|
#define SDR0_SRST_PLB 0x40000000
|
|
#define SDR0_SRST_EBC 0x20000000
|
|
#define SDR0_SRST_OPB 0x10000000
|
|
#define SDR0_SRST_UART0 0x08000000
|
|
#define SDR0_SRST_UART1 0x04000000
|
|
#define SDR0_SRST_IIC0 0x02000000
|
|
#define SDR0_SRST_IIC1 0x01000000
|
|
#define SDR0_SRST_GPIO 0x00800000
|
|
#define SDR0_SRST_GPT 0x00400000
|
|
#define SDR0_SRST_DMC 0x00200000
|
|
#define SDR0_SRST_PCI 0x00100000
|
|
#define SDR0_SRST_EMAC0 0x00080000
|
|
#define SDR0_SRST_EMAC1 0x00040000
|
|
#define SDR0_SRST_CPM 0x00020000
|
|
#define SDR0_SRST_IMU 0x00010000
|
|
#define SDR0_SRST_UIC01 0x00008000
|
|
#define SDR0_SRST_UICB2 0x00004000
|
|
#define SDR0_SRST_SRAM 0x00002000
|
|
#define SDR0_SRST_EBM 0x00001000
|
|
#define SDR0_SRST_BGI 0x00000800
|
|
#define SDR0_SRST_DMA 0x00000400
|
|
#define SDR0_SRST_DMAC 0x00000200
|
|
#define SDR0_SRST_MAL 0x00000100
|
|
#define SDR0_SRST_ZMII 0x00000080
|
|
#define SDR0_SRST_GPTR 0x00000040
|
|
#define SDR0_SRST_PPM 0x00000020
|
|
#define SDR0_SRST_EMAC2 0x00000010
|
|
#define SDR0_SRST_EMAC3 0x00000008
|
|
#define SDR0_SRST_RGMII 0x00000001
|
|
|
|
#endif
|
|
|
|
/*-----------------------------------------------------------------------------+
|
|
| Clocking
|
|
+-----------------------------------------------------------------------------*/
|
|
#if !defined (CONFIG_440GX) && \
|
|
!defined(CONFIG_440EP) && !defined(CONFIG_440GR) && \
|
|
!defined(CONFIG_440EPX) && !defined(CONFIG_440GRX) && \
|
|
!defined(CONFIG_440SP) && !defined(CONFIG_440SPE)
|
|
#define PLLSYS0_TUNE_MASK 0xffc00000 /* PLL TUNE bits */
|
|
#define PLLSYS0_FB_DIV_MASK 0x003c0000 /* Feedback divisor */
|
|
#define PLLSYS0_FWD_DIV_A_MASK 0x00038000 /* Forward divisor A */
|
|
#define PLLSYS0_FWD_DIV_B_MASK 0x00007000 /* Forward divisor B */
|
|
#define PLLSYS0_OPB_DIV_MASK 0x00000c00 /* OPB divisor */
|
|
#define PLLSYS0_EPB_DIV_MASK 0x00000300 /* EPB divisor */
|
|
#define PLLSYS0_EXTSL_MASK 0x00000080 /* PerClk feedback path */
|
|
#define PLLSYS0_RW_MASK 0x00000060 /* ROM width */
|
|
#define PLLSYS0_RL_MASK 0x00000010 /* ROM location */
|
|
#define PLLSYS0_ZMII_SEL_MASK 0x0000000c /* ZMII selection */
|
|
#define PLLSYS0_BYPASS_MASK 0x00000002 /* Bypass PLL */
|
|
#define PLLSYS0_NTO1_MASK 0x00000001 /* CPU:PLB N-to-1 ratio */
|
|
|
|
#define PLL_VCO_FREQ_MIN 500 /* Min VCO freq (MHz) */
|
|
#define PLL_VCO_FREQ_MAX 1000 /* Max VCO freq (MHz) */
|
|
#define PLL_CPU_FREQ_MAX 400 /* Max CPU freq (MHz) */
|
|
#define PLL_PLB_FREQ_MAX 133 /* Max PLB freq (MHz) */
|
|
#else /* !CONFIG_440GX or CONFIG_440EP or CONFIG_440GR */
|
|
#define PLLSYS0_ENG_MASK 0x80000000 /* 0 = SysClk, 1 = PLL VCO */
|
|
#define PLLSYS0_SRC_MASK 0x40000000 /* 0 = PLL A, 1 = PLL B */
|
|
#define PLLSYS0_SEL_MASK 0x38000000 /* 0 = PLL, 1 = CPU, 5 = PerClk */
|
|
#define PLLSYS0_TUNE_MASK 0x07fe0000 /* PLL Tune bits */
|
|
#define PLLSYS0_FB_DIV_MASK 0x0001f000 /* Feedback divisor */
|
|
#define PLLSYS0_FWD_DIV_A_MASK 0x00000f00 /* Fwd Div A */
|
|
#define PLLSYS0_FWD_DIV_B_MASK 0x000000e0 /* Fwd Div B */
|
|
#define PLLSYS0_PRI_DIV_B_MASK 0x0000001c /* PLL Primary Divisor B */
|
|
#define PLLSYS0_OPB_DIV_MASK 0x00000003 /* OPB Divisor */
|
|
|
|
#define PLLC_ENG_MASK 0x20000000 /* PLL primary forward divisor source */
|
|
#define PLLC_SRC_MASK 0x20000000 /* PLL feedback source */
|
|
#define PLLD_FBDV_MASK 0x1f000000 /* PLL Feedback Divisor */
|
|
#define PLLD_FWDVA_MASK 0x000f0000 /* PLL Forward Divisor A */
|
|
#define PLLD_FWDVB_MASK 0x00000700 /* PLL Forward Divisor B */
|
|
#define PLLD_LFBDV_MASK 0x0000003f /* PLL Local Feedback Divisor */
|
|
|
|
#define OPBDDV_MASK 0x03000000 /* OPB Clock Divisor Register */
|
|
#define PERDV_MASK 0x07000000 /* Periferal Clock Divisor */
|
|
#define PRADV_MASK 0x07000000 /* Primary Divisor A */
|
|
#define PRBDV_MASK 0x07000000 /* Primary Divisor B */
|
|
#define SPCID_MASK 0x03000000 /* Sync PCI Divisor */
|
|
|
|
#define PLL_VCO_FREQ_MIN 500 /* Min VCO freq (MHz) */
|
|
#define PLL_VCO_FREQ_MAX 1000 /* Max VCO freq (MHz) */
|
|
#define PLL_CPU_FREQ_MAX 400 /* Max CPU freq (MHz) */
|
|
#define PLL_PLB_FREQ_MAX 133 /* Max PLB freq (MHz) */
|
|
|
|
/* Strap 1 Register */
|
|
#define PLLSYS1_LF_DIV_MASK 0xfc000000 /* PLL Local Feedback Divisor */
|
|
#define PLLSYS1_PERCLK_DIV_MASK 0x03000000 /* Peripheral Clk Divisor */
|
|
#define PLLSYS1_MAL_DIV_MASK 0x00c00000 /* MAL Clk Divisor */
|
|
#define PLLSYS1_RW_MASK 0x00300000 /* ROM width */
|
|
#define PLLSYS1_EAR_MASK 0x00080000 /* ERAP Addres reset vector */
|
|
#define PLLSYS1_PAE_MASK 0x00040000 /* PCI arbitor enable */
|
|
#define PLLSYS1_PCHE_MASK 0x00020000 /* PCI host config enable */
|
|
#define PLLSYS1_PISE_MASK 0x00010000 /* PCI init seq. enable */
|
|
#define PLLSYS1_PCWE_MASK 0x00008000 /* PCI local cpu wait enable */
|
|
#define PLLSYS1_PPIM_MASK 0x00007800 /* PCI inbound map */
|
|
#define PLLSYS1_PR64E_MASK 0x00000400 /* PCI init Req64 enable */
|
|
#define PLLSYS1_PXFS_MASK 0x00000300 /* PCI-X Freq Sel */
|
|
#define PLLSYS1_RSVD_MASK 0x00000080 /* RSVD */
|
|
#define PLLSYS1_PDM_MASK 0x00000040 /* PCI-X Driver Mode */
|
|
#define PLLSYS1_EPS_MASK 0x00000038 /* Ethernet Pin Select */
|
|
#define PLLSYS1_RMII_MASK 0x00000004 /* RMII Mode */
|
|
#define PLLSYS1_TRE_MASK 0x00000002 /* GPIO Trace Enable */
|
|
#define PLLSYS1_NTO1_MASK 0x00000001 /* CPU:PLB N-to-1 ratio */
|
|
#endif /* CONFIG_440GX */
|
|
|
|
#if defined (CONFIG_440EPX) || defined (CONFIG_440GRX)
|
|
/*--------------------------------------*/
|
|
#define CPR0_PLLC 0x40
|
|
#define CPR0_PLLC_RST_MASK 0x80000000
|
|
#define CPR0_PLLC_RST_PLLLOCKED 0x00000000
|
|
#define CPR0_PLLC_RST_PLLRESET 0x80000000
|
|
#define CPR0_PLLC_ENG_MASK 0x40000000
|
|
#define CPR0_PLLC_ENG_DISABLE 0x00000000
|
|
#define CPR0_PLLC_ENG_ENABLE 0x40000000
|
|
#define CPR0_PLLC_ENG_ENCODE(n) ((((unsigned long)(n))&0x01)<<30)
|
|
#define CPR0_PLLC_ENG_DECODE(n) ((((unsigned long)(n))>>30)&0x01)
|
|
#define CPR0_PLLC_SRC_MASK 0x20000000
|
|
#define CPR0_PLLC_SRC_PLLOUTA 0x00000000
|
|
#define CPR0_PLLC_SRC_PLLOUTB 0x20000000
|
|
#define CPR0_PLLC_SRC_ENCODE(n) ((((unsigned long)(n))&0x01)<<29)
|
|
#define CPR0_PLLC_SRC_DECODE(n) ((((unsigned long)(n))>>29)&0x01)
|
|
#define CPR0_PLLC_SEL_MASK 0x07000000
|
|
#define CPR0_PLLC_SEL_PLL 0x00000000
|
|
#define CPR0_PLLC_SEL_CPU 0x01000000
|
|
#define CPR0_PLLC_SEL_PER 0x05000000
|
|
#define CPR0_PLLC_SEL_ENCODE(n) ((((unsigned long)(n))&0x07)<<24)
|
|
#define CPR0_PLLC_SEL_DECODE(n) ((((unsigned long)(n))>>24)&0x07)
|
|
#define CPR0_PLLC_TUNE_MASK 0x000003FF
|
|
#define CPR0_PLLC_TUNE_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<0)
|
|
#define CPR0_PLLC_TUNE_DECODE(n) ((((unsigned long)(n))>>0)&0x3FF)
|
|
/*--------------------------------------*/
|
|
#define CPR0_PLLD 0x60
|
|
#define CPR0_PLLD_FBDV_MASK 0x1F000000
|
|
#define CPR0_PLLD_FBDV_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24)
|
|
#define CPR0_PLLD_FBDV_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x1F)+1)
|
|
#define CPR0_PLLD_FWDVA_MASK 0x000F0000
|
|
#define CPR0_PLLD_FWDVA_ENCODE(n) ((((unsigned long)(n))&0x0F)<<16)
|
|
#define CPR0_PLLD_FWDVA_DECODE(n) ((((((unsigned long)(n))>>16)-1)&0x0F)+1)
|
|
#define CPR0_PLLD_FWDVB_MASK 0x00000700
|
|
#define CPR0_PLLD_FWDVB_ENCODE(n) ((((unsigned long)(n))&0x07)<<8)
|
|
#define CPR0_PLLD_FWDVB_DECODE(n) ((((((unsigned long)(n))>>8)-1)&0x07)+1)
|
|
#define CPR0_PLLD_LFBDV_MASK 0x0000003F
|
|
#define CPR0_PLLD_LFBDV_ENCODE(n) ((((unsigned long)(n))&0x3F)<<0)
|
|
#define CPR0_PLLD_LFBDV_DECODE(n) ((((((unsigned long)(n))>>0)-1)&0x3F)+1)
|
|
/*--------------------------------------*/
|
|
#define CPR0_PRIMAD 0x80
|
|
#define CPR0_PRIMAD_PRADV0_MASK 0x07000000
|
|
#define CPR0_PRIMAD_PRADV0_ENCODE(n) ((((unsigned long)(n))&0x07)<<24)
|
|
#define CPR0_PRIMAD_PRADV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x07)+1)
|
|
/*--------------------------------------*/
|
|
#define CPR0_PRIMBD 0xA0
|
|
#define CPR0_PRIMBD_PRBDV0_MASK 0x07000000
|
|
#define CPR0_PRIMBD_PRBDV0_ENCODE(n) ((((unsigned long)(n))&0x07)<<24)
|
|
#define CPR0_PRIMBD_PRBDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x07)+1)
|
|
/*--------------------------------------*/
|
|
#if 0
|
|
#define CPR0_CPM0_ER 0xB0 /* CPM Enable Register */
|
|
#define CPR0_CPM0_FR 0xB1 /* CPM Force Register */
|
|
#define CPR0_CPM0_SR 0xB2 /* CPM Status Register */
|
|
#define CPR0_CPM0_IIC0 0x80000000 /* Inter-Intergrated Circuit0 */
|
|
#define CPR0_CPM0_IIC1 0x40000000 /* Inter-Intergrated Circuit1 */
|
|
#define CPR0_CPM0_PCI 0x20000000 /* Peripheral Component Interconnect */
|
|
#define CPR0_CPM0_USB1H 0x08000000 /* USB1.1 Host */
|
|
#define CPR0_CPM0_FPU 0x04000000 /* PPC440 FPU */
|
|
#define CPR0_CPM0_CPU 0x02000000 /* PPC440x5 Processor Core */
|
|
#define CPR0_CPM0_DMA 0x01000000 /* Direct Memory Access Controller */
|
|
#define CPR0_CPM0_BGO 0x00800000 /* PLB to OPB Bridge */
|
|
#define CPR0_CPM0_BGI 0x00400000 /* OPB to PLB Bridge */
|
|
#define CPR0_CPM0_EBC 0x00200000 /* External Bus Controller */
|
|
#define CPR0_CPM0_NDFC 0x00100000 /* Nand Flash Controller */
|
|
#define CPR0_CPM0_MADMAL 0x00080000 /* DDR SDRAM Controller or MADMAL ??? */
|
|
#define CPR0_CPM0_DMC 0x00080000 /* DDR SDRAM Controller or MADMAL ??? */
|
|
#define CPR0_CPM0_PLB4 0x00040000 /* PLB4 Arbiter */
|
|
#define CPR0_CPM0_PLB4x3x 0x00020000 /* PLB4 to PLB3 */
|
|
#define CPR0_CPM0_PLB3x4x 0x00010000 /* PLB3 to PLB4 */
|
|
#define CPR0_CPM0_PLB3 0x00008000 /* PLB3 Arbiter */
|
|
#define CPR0_CPM0_PPM 0x00002000 /* PLB Performance Monitor */
|
|
#define CPR0_CPM0_UIC1 0x00001000 /* Universal Interrupt Controller 1 */
|
|
#define CPR0_CPM0_GPIO 0x00000800 /* General Purpose IO */
|
|
#define CPR0_CPM0_GPT 0x00000400 /* General Purpose Timer */
|
|
#define CPR0_CPM0_UART0 0x00000200 /* Universal Asynchronous Rcver/Xmitter 0 */
|
|
#define CPR0_CPM0_UART1 0x00000100 /* Universal Asynchronous Rcver/Xmitter 1 */
|
|
#define CPR0_CPM0_UIC0 0x00000080 /* Universal Interrupt Controller 0 */
|
|
#define CPR0_CPM0_TMRCLK 0x00000040 /* CPU Timer */
|
|
#define CPR0_CPM0_EMC0 0x00000020 /* Ethernet 0 */
|
|
#define CPR0_CPM0_EMC1 0x00000010 /* Ethernet 1 */
|
|
#define CPR0_CPM0_UART2 0x00000008 /* Universal Asynchronous Rcver/Xmitter 2 */
|
|
#define CPR0_CPM0_UART3 0x00000004 /* Universal Asynchronous Rcver/Xmitter 3 */
|
|
#define CPR0_CPM0_USB2D 0x00000002 /* USB2.0 Device */
|
|
#define CPR0_CPM0_USB2H 0x00000001 /* USB2.0 Host */
|
|
#endif
|
|
/*--------------------------------------*/
|
|
#define CPR0_OPBD 0xC0
|
|
#define CPR0_OPBD_OPBDV0_MASK 0x03000000
|
|
#define CPR0_OPBD_OPBDV0_ENCODE(n) ((((unsigned long)(n))&0x03)<<24)
|
|
#define CPR0_OPBD_OPBDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x03)+1)
|
|
/*--------------------------------------*/
|
|
#define CPR0_PERD 0xE0
|
|
#define CPR0_PERD_PERDV0_MASK 0x07000000
|
|
#define CPR0_PERD_PERDV0_ENCODE(n) ((((unsigned long)(n))&0x07)<<24)
|
|
#define CPR0_PERD_PERDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x07)+1)
|
|
/*--------------------------------------*/
|
|
#define CPR0_MALD 0x100
|
|
#define CPR0_MALD_MALDV0_MASK 0x03000000
|
|
#define CPR0_MALD_MALDV0_ENCODE(n) ((((unsigned long)(n))&0x03)<<24)
|
|
#define CPR0_MALD_MALDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x03)+1)
|
|
/*--------------------------------------*/
|
|
#define CPR0_SPCID 0x120
|
|
#define CPR0_SPCID_SPCIDV0_MASK 0x03000000
|
|
#define CPR0_SPCID_SPCIDV0_ENCODE(n) ((((unsigned long)(n))&0x03)<<24)
|
|
#define CPR0_SPCID_SPCIDV0_DECODE(n) ((((((unsigned long)(n))>>24)-1)&0x03)+1)
|
|
/*--------------------------------------*/
|
|
#define CPR0_ICFG 0x140
|
|
#define CPR0_ICFG_RLI_MASK 0x80000000
|
|
#define CPR0_ICFG_RLI_RESETCPR 0x00000000
|
|
#define CPR0_ICFG_RLI_PRESERVECPR 0x80000000
|
|
#define CPR0_ICFG_ICS_MASK 0x00000007
|
|
#endif /* defined (CONFIG_440EPX) || defined (CONFIG_440GRX) */
|
|
|
|
/*-----------------------------------------------------------------------------
|
|
| IIC Register Offsets
|
|
'----------------------------------------------------------------------------*/
|
|
#define IICMDBUF 0x00
|
|
#define IICSDBUF 0x02
|
|
#define IICLMADR 0x04
|
|
#define IICHMADR 0x05
|
|
#define IICCNTL 0x06
|
|
#define IICMDCNTL 0x07
|
|
#define IICSTS 0x08
|
|
#define IICEXTSTS 0x09
|
|
#define IICLSADR 0x0A
|
|
#define IICHSADR 0x0B
|
|
#define IICCLKDIV 0x0C
|
|
#define IICINTRMSK 0x0D
|
|
#define IICXFRCNT 0x0E
|
|
#define IICXTCNTLSS 0x0F
|
|
#define IICDIRECTCNTL 0x10
|
|
|
|
/*-----------------------------------------------------------------------------
|
|
| UART Register Offsets
|
|
'----------------------------------------------------------------------------*/
|
|
#define DATA_REG 0x00
|
|
#define DL_LSB 0x00
|
|
#define DL_MSB 0x01
|
|
#define INT_ENABLE 0x01
|
|
#define FIFO_CONTROL 0x02
|
|
#define LINE_CONTROL 0x03
|
|
#define MODEM_CONTROL 0x04
|
|
#define LINE_STATUS 0x05
|
|
#define MODEM_STATUS 0x06
|
|
#define SCRATCH 0x07
|
|
|
|
/*-----------------------------------------------------------------------------
|
|
| PCI Internal Registers et. al. (accessed via plb)
|
|
+----------------------------------------------------------------------------*/
|
|
#define PCIX0_CFGADR (CFG_PCI_BASE + 0x0ec00000)
|
|
#define PCIX0_CFGDATA (CFG_PCI_BASE + 0x0ec00004)
|
|
#define PCIX0_CFGBASE (CFG_PCI_BASE + 0x0ec80000)
|
|
#define PCIX0_IOBASE (CFG_PCI_BASE + 0x08000000)
|
|
|
|
#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
|
|
defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
|
|
|
|
/* PCI Local Configuration Registers
|
|
--------------------------------- */
|
|
#define PCI_MMIO_LCR_BASE (CFG_PCI_BASE + 0x0f400000) /* Real => 0x0EF400000 */
|
|
|
|
/* PCI Master Local Configuration Registers */
|
|
#define PCIX0_PMM0LA (PCI_MMIO_LCR_BASE + 0x00) /* PMM0 Local Address */
|
|
#define PCIX0_PMM0MA (PCI_MMIO_LCR_BASE + 0x04) /* PMM0 Mask/Attribute */
|
|
#define PCIX0_PMM0PCILA (PCI_MMIO_LCR_BASE + 0x08) /* PMM0 PCI Low Address */
|
|
#define PCIX0_PMM0PCIHA (PCI_MMIO_LCR_BASE + 0x0C) /* PMM0 PCI High Address */
|
|
#define PCIX0_PMM1LA (PCI_MMIO_LCR_BASE + 0x10) /* PMM1 Local Address */
|
|
#define PCIX0_PMM1MA (PCI_MMIO_LCR_BASE + 0x14) /* PMM1 Mask/Attribute */
|
|
#define PCIX0_PMM1PCILA (PCI_MMIO_LCR_BASE + 0x18) /* PMM1 PCI Low Address */
|
|
#define PCIX0_PMM1PCIHA (PCI_MMIO_LCR_BASE + 0x1C) /* PMM1 PCI High Address */
|
|
#define PCIX0_PMM2LA (PCI_MMIO_LCR_BASE + 0x20) /* PMM2 Local Address */
|
|
#define PCIX0_PMM2MA (PCI_MMIO_LCR_BASE + 0x24) /* PMM2 Mask/Attribute */
|
|
#define PCIX0_PMM2PCILA (PCI_MMIO_LCR_BASE + 0x28) /* PMM2 PCI Low Address */
|
|
#define PCIX0_PMM2PCIHA (PCI_MMIO_LCR_BASE + 0x2C) /* PMM2 PCI High Address */
|
|
|
|
/* PCI Target Local Configuration Registers */
|
|
#define PCIX0_PTM1MS (PCI_MMIO_LCR_BASE + 0x30) /* PTM1 Memory Size/Attribute */
|
|
#define PCIX0_PTM1LA (PCI_MMIO_LCR_BASE + 0x34) /* PTM1 Local Addr. Reg */
|
|
#define PCIX0_PTM2MS (PCI_MMIO_LCR_BASE + 0x38) /* PTM2 Memory Size/Attribute */
|
|
#define PCIX0_PTM2LA (PCI_MMIO_LCR_BASE + 0x3C) /* PTM2 Local Addr. Reg */
|
|
|
|
#else
|
|
|
|
#define PCIX0_VENDID (PCIX0_CFGBASE + PCI_VENDOR_ID )
|
|
#define PCIX0_DEVID (PCIX0_CFGBASE + PCI_DEVICE_ID )
|
|
#define PCIX0_CMD (PCIX0_CFGBASE + PCI_COMMAND )
|
|
#define PCIX0_STATUS (PCIX0_CFGBASE + PCI_STATUS )
|
|
#define PCIX0_REVID (PCIX0_CFGBASE + PCI_REVISION_ID )
|
|
#define PCIX0_CLS (PCIX0_CFGBASE + PCI_CLASS_CODE)
|
|
#define PCIX0_CACHELS (PCIX0_CFGBASE + PCI_CACHE_LINE_SIZE )
|
|
#define PCIX0_LATTIM (PCIX0_CFGBASE + PCI_LATENCY_TIMER )
|
|
#define PCIX0_HDTYPE (PCIX0_CFGBASE + PCI_HEADER_TYPE )
|
|
#define PCIX0_BIST (PCIX0_CFGBASE + PCI_BIST )
|
|
#define PCIX0_BAR0 (PCIX0_CFGBASE + PCI_BASE_ADDRESS_0 )
|
|
#define PCIX0_BAR1 (PCIX0_CFGBASE + PCI_BASE_ADDRESS_1 )
|
|
#define PCIX0_BAR2 (PCIX0_CFGBASE + PCI_BASE_ADDRESS_2 )
|
|
#define PCIX0_BAR3 (PCIX0_CFGBASE + PCI_BASE_ADDRESS_3 )
|
|
#define PCIX0_BAR4 (PCIX0_CFGBASE + PCI_BASE_ADDRESS_4 )
|
|
#define PCIX0_BAR5 (PCIX0_CFGBASE + PCI_BASE_ADDRESS_5 )
|
|
#define PCIX0_CISPTR (PCIX0_CFGBASE + PCI_CARDBUS_CIS )
|
|
#define PCIX0_SBSYSVID (PCIX0_CFGBASE + PCI_SUBSYSTEM_VENDOR_ID )
|
|
#define PCIX0_SBSYSID (PCIX0_CFGBASE + PCI_SUBSYSTEM_ID )
|
|
#define PCIX0_EROMBA (PCIX0_CFGBASE + PCI_ROM_ADDRESS )
|
|
#define PCIX0_CAP (PCIX0_CFGBASE + PCI_CAPABILITY_LIST )
|
|
#define PCIX0_RES0 (PCIX0_CFGBASE + 0x0035 )
|
|
#define PCIX0_RES1 (PCIX0_CFGBASE + 0x0036 )
|
|
#define PCIX0_RES2 (PCIX0_CFGBASE + 0x0038 )
|
|
#define PCIX0_INTLN (PCIX0_CFGBASE + PCI_INTERRUPT_LINE )
|
|
#define PCIX0_INTPN (PCIX0_CFGBASE + PCI_INTERRUPT_PIN )
|
|
#define PCIX0_MINGNT (PCIX0_CFGBASE + PCI_MIN_GNT )
|
|
#define PCIX0_MAXLTNCY (PCIX0_CFGBASE + PCI_MAX_LAT )
|
|
|
|
#define PCIX0_BRDGOPT1 (PCIX0_CFGBASE + 0x0040)
|
|
#define PCIX0_BRDGOPT2 (PCIX0_CFGBASE + 0x0044)
|
|
|
|
#define PCIX0_POM0LAL (PCIX0_CFGBASE + 0x0068)
|
|
#define PCIX0_POM0LAH (PCIX0_CFGBASE + 0x006c)
|
|
#define PCIX0_POM0SA (PCIX0_CFGBASE + 0x0070)
|
|
#define PCIX0_POM0PCIAL (PCIX0_CFGBASE + 0x0074)
|
|
#define PCIX0_POM0PCIAH (PCIX0_CFGBASE + 0x0078)
|
|
#define PCIX0_POM1LAL (PCIX0_CFGBASE + 0x007c)
|
|
#define PCIX0_POM1LAH (PCIX0_CFGBASE + 0x0080)
|
|
#define PCIX0_POM1SA (PCIX0_CFGBASE + 0x0084)
|
|
#define PCIX0_POM1PCIAL (PCIX0_CFGBASE + 0x0088)
|
|
#define PCIX0_POM1PCIAH (PCIX0_CFGBASE + 0x008c)
|
|
#define PCIX0_POM2SA (PCIX0_CFGBASE + 0x0090)
|
|
|
|
#define PCIX0_PIM0SA (PCIX0_CFGBASE + 0x0098)
|
|
#define PCIX0_PIM0LAL (PCIX0_CFGBASE + 0x009c)
|
|
#define PCIX0_PIM0LAH (PCIX0_CFGBASE + 0x00a0)
|
|
#define PCIX0_PIM1SA (PCIX0_CFGBASE + 0x00a4)
|
|
#define PCIX0_PIM1LAL (PCIX0_CFGBASE + 0x00a8)
|
|
#define PCIX0_PIM1LAH (PCIX0_CFGBASE + 0x00ac)
|
|
#define PCIX0_PIM2SA (PCIX0_CFGBASE + 0x00b0)
|
|
#define PCIX0_PIM2LAL (PCIX0_CFGBASE + 0x00b4)
|
|
#define PCIX0_PIM2LAH (PCIX0_CFGBASE + 0x00b8)
|
|
|
|
#define PCIX0_STS (PCIX0_CFGBASE + 0x00e0)
|
|
|
|
#endif /* !defined(CONFIG_440EP) !defined(CONFIG_440GR) */
|
|
|
|
#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
|
|
|
|
/* USB2.0 Device */
|
|
#define USB2D0_BASE CFG_USB2D0_BASE
|
|
|
|
#define USB2D0_INTRIN (USB2D0_BASE + 0x00000000)
|
|
|
|
#define USB2D0_INTRIN (USB2D0_BASE + 0x00000000) /* Interrupt register for Endpoint 0 plus IN Endpoints 1 to 3 */
|
|
#define USB2D0_POWER (USB2D0_BASE + 0x00000000) /* Power management register */
|
|
#define USB2D0_FADDR (USB2D0_BASE + 0x00000000) /* Function address register */
|
|
#define USB2D0_INTRINE (USB2D0_BASE + 0x00000000) /* Interrupt enable register for USB2D0_INTRIN */
|
|
#define USB2D0_INTROUT (USB2D0_BASE + 0x00000000) /* Interrupt register for OUT Endpoints 1 to 3 */
|
|
#define USB2D0_INTRUSBE (USB2D0_BASE + 0x00000000) /* Interrupt enable register for USB2D0_INTRUSB */
|
|
#define USB2D0_INTRUSB (USB2D0_BASE + 0x00000000) /* Interrupt register for common USB interrupts */
|
|
#define USB2D0_INTROUTE (USB2D0_BASE + 0x00000000) /* Interrupt enable register for IntrOut */
|
|
#define USB2D0_TSTMODE (USB2D0_BASE + 0x00000000) /* Enables the USB 2.0 test modes */
|
|
#define USB2D0_INDEX (USB2D0_BASE + 0x00000000) /* Index register for selecting the Endpoint status/control registers */
|
|
#define USB2D0_FRAME (USB2D0_BASE + 0x00000000) /* Frame number */
|
|
#define USB2D0_INCSR0 (USB2D0_BASE + 0x00000000) /* Control Status register for Endpoint 0. (Index register set to select Endpoint 0) */
|
|
#define USB2D0_INCSR (USB2D0_BASE + 0x00000000) /* Control Status register for IN Endpoint. (Index register set to select Endpoints 13) */
|
|
#define USB2D0_INMAXP (USB2D0_BASE + 0x00000000) /* Maximum packet size for IN Endpoint. (Index register set to select Endpoints 13) */
|
|
#define USB2D0_OUTCSR (USB2D0_BASE + 0x00000000) /* Control Status register for OUT Endpoint. (Index register set to select Endpoints 13) */
|
|
#define USB2D0_OUTMAXP (USB2D0_BASE + 0x00000000) /* Maximum packet size for OUT Endpoint. (Index register set to select Endpoints 13) */
|
|
#define USB2D0_OUTCOUNT0 (USB2D0_BASE + 0x00000000) /* Number of received bytes in Endpoint 0 FIFO. (Index register set to select Endpoint 0) */
|
|
#define USB2D0_OUTCOUNT (USB2D0_BASE + 0x00000000) /* Number of bytes in OUT Endpoint FIFO. (Index register set to select Endpoints 13) */
|
|
#endif
|
|
|
|
/******************************************************************************
|
|
* GPIO macro register defines
|
|
******************************************************************************/
|
|
#define GPIO0 0
|
|
#define GPIO1 1
|
|
|
|
#if defined(CONFIG_440GP) || defined(CONFIG_440GX) || \
|
|
defined(CONFIG_440SP) || defined(CONFIG_440SPE)
|
|
#define GPIO0_BASE (CFG_PERIPHERAL_BASE+0x00000700)
|
|
|
|
#define GPIO0_OR (GPIO0_BASE+0x0)
|
|
#define GPIO0_TCR (GPIO0_BASE+0x4)
|
|
#define GPIO0_ODR (GPIO0_BASE+0x18)
|
|
#define GPIO0_IR (GPIO0_BASE+0x1C)
|
|
#endif /* CONFIG_440GP */
|
|
|
|
#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
|
|
defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
|
|
#define GPIO0_BASE (CFG_PERIPHERAL_BASE+0x00000B00)
|
|
#define GPIO1_BASE (CFG_PERIPHERAL_BASE+0x00000C00)
|
|
|
|
/* Offsets */
|
|
#define GPIOx_OR 0x00 /* GPIO Output Register */
|
|
#define GPIOx_TCR 0x04 /* GPIO Three-State Control Register */
|
|
#define GPIOx_OSL 0x08 /* GPIO Output Select Register (Bits 0-31) */
|
|
#define GPIOx_OSH 0x0C /* GPIO Ouput Select Register (Bits 32-63) */
|
|
#define GPIOx_TSL 0x10 /* GPIO Three-State Select Register (Bits 0-31) */
|
|
#define GPIOx_TSH 0x14 /* GPIO Three-State Select Register (Bits 32-63) */
|
|
#define GPIOx_ODR 0x18 /* GPIO Open drain Register */
|
|
#define GPIOx_IR 0x1C /* GPIO Input Register */
|
|
#define GPIOx_RR1 0x20 /* GPIO Receive Register 1 */
|
|
#define GPIOx_RR2 0x24 /* GPIO Receive Register 2 */
|
|
#define GPIOx_RR3 0x28 /* GPIO Receive Register 3 */
|
|
#define GPIOx_IS1L 0x30 /* GPIO Input Select Register 1 (Bits 0-31) */
|
|
#define GPIOx_IS1H 0x34 /* GPIO Input Select Register 1 (Bits 32-63) */
|
|
#define GPIOx_IS2L 0x38 /* GPIO Input Select Register 2 (Bits 0-31) */
|
|
#define GPIOx_IS2H 0x3C /* GPIO Input Select Register 2 (Bits 32-63) */
|
|
#define GPIOx_IS3L 0x40 /* GPIO Input Select Register 3 (Bits 0-31) */
|
|
#define GPIOx_IS3H 0x44 /* GPIO Input Select Register 3 (Bits 32-63) */
|
|
|
|
#define GPIO_OS(x) (x+GPIOx_OSL) /* GPIO Output Register High or Low */
|
|
#define GPIO_TS(x) (x+GPIOx_TSL) /* GPIO Three-state Control Reg High or Low */
|
|
#define GPIO_IS1(x) (x+GPIOx_IS1L) /* GPIO Input register1 High or Low */
|
|
#define GPIO_IS2(x) (x+GPIOx_IS2L) /* GPIO Input register2 High or Low */
|
|
#define GPIO_IS3(x) (x+GPIOx_IS3L) /* GPIO Input register3 High or Low */
|
|
|
|
#define GPIO0_OR (GPIO0_BASE+0x0)
|
|
#define GPIO0_TCR (GPIO0_BASE+0x4)
|
|
#define GPIO0_OSRL (GPIO0_BASE+0x8)
|
|
#define GPIO0_OSRH (GPIO0_BASE+0xC)
|
|
#define GPIO0_TSRL (GPIO0_BASE+0x10)
|
|
#define GPIO0_TSRH (GPIO0_BASE+0x14)
|
|
#define GPIO0_ODR (GPIO0_BASE+0x18)
|
|
#define GPIO0_IR (GPIO0_BASE+0x1C)
|
|
#define GPIO0_RR1 (GPIO0_BASE+0x20)
|
|
#define GPIO0_RR2 (GPIO0_BASE+0x24)
|
|
#define GPIO0_RR3 (GPIO0_BASE+0x28)
|
|
#define GPIO0_ISR1L (GPIO0_BASE+0x30)
|
|
#define GPIO0_ISR1H (GPIO0_BASE+0x34)
|
|
#define GPIO0_ISR2L (GPIO0_BASE+0x38)
|
|
#define GPIO0_ISR2H (GPIO0_BASE+0x3C)
|
|
#define GPIO0_ISR3L (GPIO0_BASE+0x40)
|
|
#define GPIO0_ISR3H (GPIO0_BASE+0x44)
|
|
|
|
#define GPIO1_OR (GPIO1_BASE+0x0)
|
|
#define GPIO1_TCR (GPIO1_BASE+0x4)
|
|
#define GPIO1_OSRL (GPIO1_BASE+0x8)
|
|
#define GPIO1_OSRH (GPIO1_BASE+0xC)
|
|
#define GPIO1_TSRL (GPIO1_BASE+0x10)
|
|
#define GPIO1_TSRH (GPIO1_BASE+0x14)
|
|
#define GPIO1_ODR (GPIO1_BASE+0x18)
|
|
#define GPIO1_IR (GPIO1_BASE+0x1C)
|
|
#define GPIO1_RR1 (GPIO1_BASE+0x20)
|
|
#define GPIO1_RR2 (GPIO1_BASE+0x24)
|
|
#define GPIO1_RR3 (GPIO1_BASE+0x28)
|
|
#define GPIO1_ISR1L (GPIO1_BASE+0x30)
|
|
#define GPIO1_ISR1H (GPIO1_BASE+0x34)
|
|
#define GPIO1_ISR2L (GPIO1_BASE+0x38)
|
|
#define GPIO1_ISR2H (GPIO1_BASE+0x3C)
|
|
#define GPIO1_ISR3L (GPIO1_BASE+0x40)
|
|
#define GPIO1_ISR3H (GPIO1_BASE+0x44)
|
|
#endif
|
|
|
|
#define GPIO_GROUP_MAX 2
|
|
#define GPIO_MAX 32
|
|
#define GPIO_ALT1_SEL 0x40000000 /* GPIO_OUT value put in GPIO_TSx for the GPIO nb 0 */
|
|
#define GPIO_ALT2_SEL 0x80000000 /* GPIO_OUT value put in GPIO_TSx for the GPIO nb 1 */
|
|
#define GPIO_ALT3_SEL 0xC0000000 /* GPIO_OUT value put in GPIO_TSx for the GPIO nb 2 */
|
|
#define GPIO_MASK 0xC0000000 /* GPIO_MASK */
|
|
#define GPIO_IN_SEL 0x40000000 /* GPIO_IN value put in GPIO_ISx for the GPIO nb 0 */
|
|
/* For the other GPIO number, you must shift */
|
|
|
|
#define GPIO_VAL(gpio) (0x80000000 >> (gpio))
|
|
|
|
#ifndef __ASSEMBLY__
|
|
|
|
typedef enum gpio_select { GPIO_SEL, GPIO_ALT1, GPIO_ALT2, GPIO_ALT3 } gpio_select_t;
|
|
typedef enum gpio_driver { GPIO_DIS, GPIO_IN, GPIO_OUT, GPIO_BI } gpio_driver_t;
|
|
|
|
typedef struct { unsigned long add; /* gpio core base address */
|
|
gpio_driver_t in_out; /* Driver Setting */
|
|
gpio_select_t alt_nb; /* Selected Alternate */
|
|
} gpio_param_s;
|
|
|
|
#endif /* __ASSEMBLY__ */
|
|
|
|
/*
|
|
* Macros for accessing the indirect EBC registers
|
|
*/
|
|
#define mtebc(reg, data) { mtdcr(ebccfga,reg);mtdcr(ebccfgd,data); }
|
|
#define mfebc(reg, data) { mtdcr(ebccfga,reg);data = mfdcr(ebccfgd); }
|
|
|
|
/*
|
|
* Macros for accessing the indirect SDRAM controller registers
|
|
*/
|
|
#define mtsdram(reg, data) { mtdcr(memcfga,reg);mtdcr(memcfgd,data); }
|
|
#define mfsdram(reg, data) { mtdcr(memcfga,reg);data = mfdcr(memcfgd); }
|
|
|
|
/*
|
|
* Macros for accessing the indirect clocking controller registers
|
|
*/
|
|
#define mtclk(reg, data) { mtdcr(clkcfga,reg);mtdcr(clkcfgd,data); }
|
|
#define mfclk(reg, data) { mtdcr(clkcfga,reg);data = mfdcr(clkcfgd); }
|
|
|
|
/*
|
|
* Macros for accessing the sdr controller registers
|
|
*/
|
|
#define mtsdr(reg, data) { mtdcr(sdrcfga,reg);mtdcr(sdrcfgd,data); }
|
|
#define mfsdr(reg, data) { mtdcr(sdrcfga,reg);data = mfdcr(sdrcfgd); }
|
|
|
|
|
|
#ifndef __ASSEMBLY__
|
|
|
|
typedef struct {
|
|
unsigned long pllFwdDivA;
|
|
unsigned long pllFwdDivB;
|
|
unsigned long pllFbkDiv;
|
|
unsigned long pllOpbDiv;
|
|
unsigned long pllPciDiv;
|
|
unsigned long pllExtBusDiv;
|
|
unsigned long freqVCOMhz; /* in MHz */
|
|
unsigned long freqProcessor;
|
|
unsigned long freqTmrClk;
|
|
unsigned long freqPLB;
|
|
unsigned long freqOPB;
|
|
unsigned long freqEPB;
|
|
unsigned long freqPCI;
|
|
#ifdef CONFIG_440SPE
|
|
unsigned long freqDDR;
|
|
#endif
|
|
unsigned long pciIntArbEn; /* Internal PCI arbiter is enabled */
|
|
unsigned long pciClkSync; /* PCI clock is synchronous */
|
|
} PPC440_SYS_INFO;
|
|
|
|
#endif /* _ASMLANGUAGE */
|
|
|
|
#define RESET_VECTOR 0xfffffffc
|
|
#define CACHELINE_MASK (CFG_CACHELINE_SIZE - 1) /* Address mask for */
|
|
/* cache line aligned data. */
|
|
|
|
#endif /* __PPC440_H__ */
|
|
|