upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
194 lines
5.6 KiB
194 lines
5.6 KiB
/*
|
|
* Copyright 2018 Armadeus Systems <support@armadeus.com>
|
|
*
|
|
* This file is dual-licensed: you can use it either under the terms
|
|
* of the GPL or the X11 license, at your option. Note that this dual
|
|
* licensing only applies to this file, and not this project as a
|
|
* whole.
|
|
*
|
|
* a) This file is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This file is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public
|
|
* License along with this file; if not, write to the Free
|
|
* Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
|
|
* MA 02110-1301 USA
|
|
*
|
|
* Or, alternatively,
|
|
*
|
|
* b) Permission is hereby granted, free of charge, to any person
|
|
* obtaining a copy of this software and associated documentation
|
|
* files (the "Software"), to deal in the Software without
|
|
* restriction, including without limitation the rights to use,
|
|
* copy, modify, merge, publish, distribute, sublicense, and/or
|
|
* sell copies of the Software, and to permit persons to whom the
|
|
* Software is furnished to do so, subject to the following
|
|
* conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be
|
|
* included in all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
|
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
|
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
|
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
* OTHER DEALINGS IN THE SOFTWARE.
|
|
*/
|
|
|
|
#include "imx6ul.dtsi"
|
|
|
|
/ {
|
|
memory {
|
|
reg = <0x80000000 0>; /* will be filled by U-Boot */
|
|
};
|
|
|
|
reg_3v3: regulator-3v3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "3V3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
usdhc3_pwrseq: usdhc3-pwrseq {
|
|
compatible = "mmc-pwrseq-simple";
|
|
reset-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
&fec1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_enet1>;
|
|
phy-mode = "rmii";
|
|
phy-reset-duration = <1>;
|
|
phy-reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
|
|
phy-handle = <ðphy1>;
|
|
phy-supply = <®_3v3>;
|
|
status = "okay";
|
|
|
|
mdio: mdio {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
ethphy1: ethernet-phy@1 {
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
reg = <1>;
|
|
interrupt-parent = <&gpio4>;
|
|
interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
|
|
status = "okay";
|
|
};
|
|
};
|
|
};
|
|
|
|
/* Bluetooth */
|
|
&uart8 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart8>;
|
|
uart-has-rtscts;
|
|
status = "okay";
|
|
};
|
|
|
|
/* eMMC */
|
|
&usdhc1 {
|
|
u-boot,dm-spl;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usdhc1>;
|
|
bus-width = <8>;
|
|
no-1-8-v;
|
|
non-removable;
|
|
status = "okay";
|
|
};
|
|
|
|
/* WiFi */
|
|
&usdhc2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usdhc2>;
|
|
bus-width = <4>;
|
|
no-1-8-v;
|
|
non-removable;
|
|
mmc-pwrseq = <&usdhc3_pwrseq>;
|
|
status = "okay";
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
brcmf: bcrmf@1 {
|
|
compatible = "brcm,bcm4329-fmac";
|
|
reg = <1>;
|
|
interrupt-parent = <&gpio2>;
|
|
interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
|
|
interrupt-names = "host-wake";
|
|
};
|
|
};
|
|
|
|
&iomuxc {
|
|
pinctrl_enet1: enet1grp {
|
|
fsl,pins = <
|
|
MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0
|
|
MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0
|
|
MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x130b0
|
|
MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x130b0
|
|
MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x130b0
|
|
MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x130b0
|
|
MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
|
|
MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
|
|
MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0
|
|
/* INT# */
|
|
MX6UL_PAD_NAND_DQS__GPIO4_IO16 0x1b0b0
|
|
/* RST# */
|
|
MX6UL_PAD_NAND_DATA00__GPIO4_IO02 0x130b0
|
|
MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart8: uart8grp {
|
|
fsl,pins = <
|
|
MX6UL_PAD_ENET2_TX_EN__UART8_DCE_RX 0x1b0b0
|
|
MX6UL_PAD_ENET2_TX_DATA1__UART8_DCE_TX 0x1b0b0
|
|
MX6UL_PAD_ENET2_RX_ER__UART8_DCE_RTS 0x1b0b0
|
|
MX6UL_PAD_ENET2_TX_CLK__UART8_DCE_CTS 0x1b0b0
|
|
/* BT_REG_ON */
|
|
MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10 0x130b0
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc1: usdhc1grp {
|
|
u-boot,dm-spl;
|
|
fsl,pins = <
|
|
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
|
|
MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059
|
|
MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
|
|
MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
|
|
MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
|
|
MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
|
|
MX6UL_PAD_NAND_READY_B__USDHC1_DATA4 0x17059
|
|
MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5 0x17059
|
|
MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6 0x17059
|
|
MX6UL_PAD_NAND_CLE__USDHC1_DATA7 0x17059
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc2: usdhc2grp {
|
|
fsl,pins = <
|
|
MX6UL_PAD_LCD_DATA18__USDHC2_CMD 0x1b0b0
|
|
MX6UL_PAD_LCD_DATA19__USDHC2_CLK 0x100b0
|
|
MX6UL_PAD_LCD_DATA20__USDHC2_DATA0 0x1b0b0
|
|
MX6UL_PAD_LCD_DATA21__USDHC2_DATA1 0x1b0b0
|
|
MX6UL_PAD_LCD_DATA22__USDHC2_DATA2 0x1b0b0
|
|
MX6UL_PAD_LCD_DATA23__USDHC2_DATA3 0x1b0b0
|
|
/* WL_REG_ON */
|
|
MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09 0x130b0
|
|
/* WL_IRQ */
|
|
MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08 0x1b0b0
|
|
>;
|
|
};
|
|
};
|
|
|