upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
328 lines
7.9 KiB
328 lines
7.9 KiB
/*
|
|
* (C) Copyright 2000-2002
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
/*
|
|
* This file contains all the macros and symbols which define
|
|
* a PowerPC assembly language environment.
|
|
*/
|
|
#ifndef __PPC_ASM_TMPL__
|
|
#define __PPC_ASM_TMPL__
|
|
|
|
#include <config.h>
|
|
|
|
/***************************************************************************
|
|
*
|
|
* These definitions simplify the ugly declarations necessary for GOT
|
|
* definitions.
|
|
*
|
|
* Stolen from prepboot/bootldr.h, (C) 1998 Gabriel Paubert, paubert@iram.es
|
|
*
|
|
* Uses r12 to access the GOT
|
|
*/
|
|
|
|
#define START_GOT \
|
|
.section ".got2","aw"; \
|
|
.LCTOC1 = .+32768
|
|
|
|
#define END_GOT \
|
|
.text
|
|
|
|
#define GET_GOT \
|
|
bl 1f ; \
|
|
.text 2 ; \
|
|
0: .long .LCTOC1-1f ; \
|
|
.text ; \
|
|
1: mflr r12 ; \
|
|
lwz r0,0b-1b(r12) ; \
|
|
add r12,r0,r12 ;
|
|
|
|
#define GOT_ENTRY(NAME) .L_ ## NAME = . - .LCTOC1 ; .long NAME
|
|
|
|
#define GOT(NAME) .L_ ## NAME (r12)
|
|
|
|
|
|
/***************************************************************************
|
|
* Register names
|
|
*/
|
|
#define r0 0
|
|
#define r1 1
|
|
#define r2 2
|
|
#define r3 3
|
|
#define r4 4
|
|
#define r5 5
|
|
#define r6 6
|
|
#define r7 7
|
|
#define r8 8
|
|
#define r9 9
|
|
#define r10 10
|
|
#define r11 11
|
|
#define r12 12
|
|
#define r13 13
|
|
#define r14 14
|
|
#define r15 15
|
|
#define r16 16
|
|
#define r17 17
|
|
#define r18 18
|
|
#define r19 19
|
|
#define r20 20
|
|
#define r21 21
|
|
#define r22 22
|
|
#define r23 23
|
|
#define r24 24
|
|
#define r25 25
|
|
#define r26 26
|
|
#define r27 27
|
|
#define r28 28
|
|
#define r29 29
|
|
#define r30 30
|
|
#define r31 31
|
|
|
|
|
|
#if defined(CONFIG_8xx)
|
|
|
|
/* Some special registers */
|
|
|
|
#define ICR 148 /* Interrupt Cause Register (37-44) */
|
|
#define DER 149
|
|
#define COUNTA 150 /* Breakpoint Counter (37-44) */
|
|
#define COUNTB 151 /* Breakpoint Counter (37-44) */
|
|
#define LCTRL1 156 /* Load/Store Support (37-40) */
|
|
#define LCTRL2 157 /* Load/Store Support (37-41) */
|
|
#define ICTRL 158
|
|
|
|
#endif /* CONFIG_8xx */
|
|
|
|
|
|
#if defined(CONFIG_5xx)
|
|
/* Some special purpose registers */
|
|
#define DER 149 /* Debug Enable Register */
|
|
#define COUNTA 150 /* Breakpoint Counter */
|
|
#define COUNTB 151 /* Breakpoint Counter */
|
|
#define LCTRL1 156 /* Load/Store Support */
|
|
#define LCTRL2 157 /* Load/Store Support */
|
|
#define ICTRL 158 /* I-Bus Support Control Register */
|
|
#define EID 81
|
|
#endif /* CONFIG_5xx */
|
|
|
|
#if defined(CONFIG_8xx)
|
|
|
|
/* Registers in the processor's internal memory map that we use.
|
|
*/
|
|
#define SYPCR 0x00000004
|
|
#define BR0 0x00000100
|
|
#define OR0 0x00000104
|
|
#define BR1 0x00000108
|
|
#define OR1 0x0000010c
|
|
#define BR2 0x00000110
|
|
#define OR2 0x00000114
|
|
#define BR3 0x00000118
|
|
#define OR3 0x0000011c
|
|
#define BR4 0x00000120
|
|
#define OR4 0x00000124
|
|
|
|
#define MAR 0x00000164
|
|
#define MCR 0x00000168
|
|
#define MAMR 0x00000170
|
|
#define MBMR 0x00000174
|
|
#define MSTAT 0x00000178
|
|
#define MPTPR 0x0000017a
|
|
#define MDR 0x0000017c
|
|
|
|
#define TBSCR 0x00000200
|
|
#define TBREFF0 0x00000204
|
|
|
|
#define PLPRCR 0x00000284
|
|
|
|
#elif defined(CONFIG_MPC8260)
|
|
|
|
#define HID2 1011
|
|
|
|
#define HID0_IFEM (1<<7)
|
|
|
|
#define HID0_ICE_BITPOS 16
|
|
#define HID0_DCE_BITPOS 17
|
|
|
|
#define IM_REGBASE 0x10000
|
|
#define IM_SYPCR (IM_REGBASE+0x0004)
|
|
#define IM_SWSR (IM_REGBASE+0x000e)
|
|
#define IM_BR0 (IM_REGBASE+0x0100)
|
|
#define IM_OR0 (IM_REGBASE+0x0104)
|
|
#define IM_BR1 (IM_REGBASE+0x0108)
|
|
#define IM_OR1 (IM_REGBASE+0x010c)
|
|
#define IM_BR2 (IM_REGBASE+0x0110)
|
|
#define IM_OR2 (IM_REGBASE+0x0114)
|
|
#define IM_MPTPR (IM_REGBASE+0x0184)
|
|
#define IM_PSDMR (IM_REGBASE+0x0190)
|
|
#define IM_PSRT (IM_REGBASE+0x019c)
|
|
#define IM_IMMR (IM_REGBASE+0x01a8)
|
|
#define IM_SCCR (IM_REGBASE+0x0c80)
|
|
|
|
#elif defined(CONFIG_MPC5xxx)
|
|
|
|
#define HID0_ICE_BITPOS 16
|
|
#define HID0_DCE_BITPOS 17
|
|
|
|
#endif
|
|
|
|
#define curptr r2
|
|
|
|
#define SYNC \
|
|
sync; \
|
|
isync
|
|
|
|
/*
|
|
* Macros for storing registers into and loading registers from
|
|
* exception frames.
|
|
*/
|
|
#define SAVE_GPR(n, base) stw n,GPR0+4*(n)(base)
|
|
#define SAVE_2GPRS(n, base) SAVE_GPR(n, base); SAVE_GPR(n+1, base)
|
|
#define SAVE_4GPRS(n, base) SAVE_2GPRS(n, base); SAVE_2GPRS(n+2, base)
|
|
#define SAVE_8GPRS(n, base) SAVE_4GPRS(n, base); SAVE_4GPRS(n+4, base)
|
|
#define SAVE_10GPRS(n, base) SAVE_8GPRS(n, base); SAVE_2GPRS(n+8, base)
|
|
#define REST_GPR(n, base) lwz n,GPR0+4*(n)(base)
|
|
#define REST_2GPRS(n, base) REST_GPR(n, base); REST_GPR(n+1, base)
|
|
#define REST_4GPRS(n, base) REST_2GPRS(n, base); REST_2GPRS(n+2, base)
|
|
#define REST_8GPRS(n, base) REST_4GPRS(n, base); REST_4GPRS(n+4, base)
|
|
#define REST_10GPRS(n, base) REST_8GPRS(n, base); REST_2GPRS(n+8, base)
|
|
|
|
/*
|
|
* GCC sometimes accesses words at negative offsets from the stack
|
|
* pointer, although the SysV ABI says it shouldn't. To cope with
|
|
* this, we leave this much untouched space on the stack on exception
|
|
* entry.
|
|
*/
|
|
#define STACK_UNDERHEAD 64
|
|
|
|
/*
|
|
* Exception entry code. This code runs with address translation
|
|
* turned off, i.e. using physical addresses.
|
|
* We assume sprg3 has the physical address of the current
|
|
* task's thread_struct.
|
|
*/
|
|
#define EXCEPTION_PROLOG(reg1, reg2) \
|
|
mtspr SPRG0,r20; \
|
|
mtspr SPRG1,r21; \
|
|
mfcr r20; \
|
|
subi r21,r1,INT_FRAME_SIZE+STACK_UNDERHEAD; /* alloc exc. frame */\
|
|
stw r20,_CCR(r21); /* save registers */ \
|
|
stw r22,GPR22(r21); \
|
|
stw r23,GPR23(r21); \
|
|
mfspr r20,SPRG0; \
|
|
stw r20,GPR20(r21); \
|
|
mfspr r22,SPRG1; \
|
|
stw r22,GPR21(r21); \
|
|
mflr r20; \
|
|
stw r20,_LINK(r21); \
|
|
mfctr r22; \
|
|
stw r22,_CTR(r21); \
|
|
mfspr r20,XER; \
|
|
stw r20,_XER(r21); \
|
|
mfspr r20, DAR_DEAR; \
|
|
stw r20,_DAR(r21); \
|
|
mfspr r22,reg1; \
|
|
mfspr r23,reg2; \
|
|
stw r0,GPR0(r21); \
|
|
stw r1,GPR1(r21); \
|
|
stw r2,GPR2(r21); \
|
|
stw r1,0(r21); \
|
|
mr r1,r21; /* set new kernel sp */ \
|
|
SAVE_4GPRS(3, r21);
|
|
/*
|
|
* Note: code which follows this uses cr0.eq (set if from kernel),
|
|
* r21, r22 (SRR0), and r23 (SRR1).
|
|
*/
|
|
|
|
/*
|
|
* Exception vectors.
|
|
*
|
|
* The data words for `hdlr' and `int_return' are initialized with
|
|
* OFFSET values only; they must be relocated first before they can
|
|
* be used!
|
|
*/
|
|
#define COPY_EE(d, s) rlwimi d,s,0,16,16
|
|
#define NOCOPY(d, s)
|
|
|
|
#ifdef CONFIG_E500
|
|
#define EXC_XFER_TEMPLATE(n, label, hdlr, msr, copyee) \
|
|
stw r22,_NIP(r21); \
|
|
stw r23,_MSR(r21); \
|
|
li r23,n; \
|
|
stw r23,TRAP(r21); \
|
|
li r20,msr; \
|
|
copyee(r20,r23); \
|
|
rlwimi r20,r23,0,25,25; \
|
|
mtmsr r20; \
|
|
bl 1f; \
|
|
1: mflr r23; \
|
|
addis r23,r23,(hdlr - 1b)@ha; \
|
|
addi r23,r23,(hdlr - 1b)@l; \
|
|
b transfer_to_handler
|
|
|
|
#define STD_EXCEPTION(n, label, hdlr) \
|
|
.align 4; \
|
|
label: \
|
|
EXCEPTION_PROLOG(SRR0, SRR1); \
|
|
addi r3,r1,STACK_FRAME_OVERHEAD; \
|
|
EXC_XFER_TEMPLATE(n, label, hdlr, MSR_KERNEL, NOCOPY) \
|
|
|
|
#define CRIT_EXCEPTION(n, label, hdlr) \
|
|
.align 4; \
|
|
label: \
|
|
EXCEPTION_PROLOG(CSRR0, CSRR1); \
|
|
addi r3,r1,STACK_FRAME_OVERHEAD; \
|
|
EXC_XFER_TEMPLATE(n, label, hdlr, \
|
|
MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE), NOCOPY) \
|
|
|
|
#define MCK_EXCEPTION(n, label, hdlr) \
|
|
.align 4; \
|
|
label: \
|
|
EXCEPTION_PROLOG(MCSRR0, MCSRR1); \
|
|
addi r3,r1,STACK_FRAME_OVERHEAD; \
|
|
EXC_XFER_TEMPLATE(n, label, hdlr, \
|
|
MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE), NOCOPY) \
|
|
|
|
#else /* !E500 */
|
|
|
|
#define EXC_XFER_TEMPLATE(label, hdlr, msr, copyee) \
|
|
bl 1f; \
|
|
1: mflr r20; \
|
|
lwz r20,(.L_ ## label)-1b+8(r20); \
|
|
mtlr r20; \
|
|
li r20,msr; \
|
|
copyee(r20,r23); \
|
|
rlwimi r20,r23,0,25,25; \
|
|
blrl; \
|
|
.L_ ## label : \
|
|
.long hdlr - _start + _START_OFFSET; \
|
|
.long int_return - _start + _START_OFFSET; \
|
|
.long transfer_to_handler - _start + _START_OFFSET
|
|
|
|
#define STD_EXCEPTION(n, label, hdlr) \
|
|
. = n; \
|
|
label: \
|
|
EXCEPTION_PROLOG(SRR0, SRR1); \
|
|
addi r3,r1,STACK_FRAME_OVERHEAD; \
|
|
EXC_XFER_TEMPLATE(label, hdlr, MSR_KERNEL, NOCOPY) \
|
|
|
|
#define CRIT_EXCEPTION(n, label, hdlr) \
|
|
. = n; \
|
|
label: \
|
|
EXCEPTION_PROLOG(CSRR0, CSRR1); \
|
|
addi r3,r1,STACK_FRAME_OVERHEAD; \
|
|
EXC_XFER_TEMPLATE(label, hdlr, \
|
|
MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE), NOCOPY) \
|
|
|
|
#define MCK_EXCEPTION(n, label, hdlr) \
|
|
. = n; \
|
|
label: \
|
|
EXCEPTION_PROLOG(MCSRR0, MCSRR1); \
|
|
addi r3,r1,STACK_FRAME_OVERHEAD; \
|
|
EXC_XFER_TEMPLATE(label, hdlr, \
|
|
MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE), NOCOPY) \
|
|
|
|
#endif /* !E500 */
|
|
#endif /* __PPC_ASM_TMPL__ */
|
|
|