upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/board/dave/PPChameleonEVB/PPChameleonEVB.c

247 lines
5.9 KiB

/*
* (C) Copyright 2003
* DAVE Srl
* http://www.dave-tech.it
* http://www.wawnet.biz
* mailto:info@wawnet.biz
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/processor.h>
#include <command.h>
#include <malloc.h>
DECLARE_GLOBAL_DATA_PTR;
/* ------------------------------------------------------------------------- */
int board_early_init_f (void)
{
out32(GPIO0_OR, CONFIG_SYS_NAND0_CE); /* set initial outputs */
out32(GPIO0_OR, CONFIG_SYS_NAND1_CE); /* set initial outputs */
/*
* IRQ 0-15 405GP internally generated; active high; level sensitive
* IRQ 16 405GP internally generated; active low; level sensitive
* IRQ 17-24 RESERVED
* IRQ 25 (EXT IRQ 0)
* IRQ 26 (EXT IRQ 1)
* IRQ 27 (EXT IRQ 2)
* IRQ 28 (EXT IRQ 3)
* IRQ 29 (EXT IRQ 4)
* IRQ 30 (EXT IRQ 5)
* IRQ 31 (EXT IRQ 6)
*/
mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
mtdcr(UIC0ER, 0x00000000); /* disable all ints */
mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical*/
mtdcr(UIC0PR, 0xFFFFFF80); /* set int polarities */
mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */
mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority*/
mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
/*
* EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us
*/
#if 1 /* test-only */
mtebc (EBC0_CFG, 0xa8400000); /* ebc always driven */
#else
mtebc (EBC0_CFG, 0x28400000); /* ebc in high-z */
#endif
return 0;
}
/* ------------------------------------------------------------------------- */
int misc_init_f (void)
{
return 0; /* dummy implementation */
}
extern flash_info_t flash_info[]; /* info for FLASH chips */
int misc_init_r (void)
{
/* adjust flash start and size as well as the offset */
gd->bd->bi_flashstart = 0 - flash_info[0].size;
gd->bd->bi_flashoffset= flash_info[0].size - CONFIG_SYS_MONITOR_LEN;
#if 0
volatile unsigned short *fpga_mode =
(unsigned short *)((ulong)CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL);
volatile unsigned char *duart0_mcr =
(unsigned char *)((ulong)DUART0_BA + 4);
volatile unsigned char *duart1_mcr =
(unsigned char *)((ulong)DUART1_BA + 4);
bd_t *bd = gd->bd;
char * tmp; /* Temporary char pointer */
unsigned char *dst;
ulong len = sizeof(fpgadata);
int status;
int index;
int i;
unsigned long CPC0_CR0Reg;
dst = malloc(CONFIG_SYS_FPGA_MAX_SIZE);
if (gunzip (dst, CONFIG_SYS_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
printf ("GUNZIP ERROR - must RESET board to recover\n");
do_reset (NULL, 0, 0, NULL);
}
status = fpga_boot(dst, len);
if (status != 0) {
printf("\nFPGA: Booting failed ");
switch (status) {
case ERROR_FPGA_PRG_INIT_LOW:
printf("(Timeout: INIT not low after asserting PROGRAM*)\n ");
break;
case ERROR_FPGA_PRG_INIT_HIGH:
printf("(Timeout: INIT not high after deasserting PROGRAM*)\n ");
break;
case ERROR_FPGA_PRG_DONE:
printf("(Timeout: DONE not high after programming FPGA)\n ");
break;
}
/* display infos on fpgaimage */
index = 15;
for (i=0; i<4; i++) {
len = dst[index];
printf("FPGA: %s\n", &(dst[index+1]));
index += len+3;
}
putc ('\n');
/* delayed reboot */
for (i=20; i>0; i--) {
printf("Rebooting in %2d seconds \r",i);
for (index=0;index<1000;index++)
udelay(1000);
}
putc ('\n');
do_reset(NULL, 0, 0, NULL);
}
puts("FPGA: ");
/* display infos on fpgaimage */
index = 15;
for (i=0; i<4; i++) {
len = dst[index];
printf("%s ", &(dst[index+1]));
index += len+3;
}
putc ('\n');
free(dst);
/*
* Reset FPGA via FPGA_DATA pin
*/
SET_FPGA(FPGA_PRG | FPGA_CLK);
udelay(1000); /* wait 1ms */
SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);
udelay(1000); /* wait 1ms */
#endif
#if 0
/*
* Enable power on PS/2 interface
*/
*fpga_mode |= CONFIG_SYS_FPGA_CTRL_PS2_RESET;
/*
* Enable interrupts in exar duart mcr[3]
*/
*duart0_mcr = 0x08;
*duart1_mcr = 0x08;
#endif
return (0);
}
/*
* Check Board Identity:
*/
int checkboard (void)
{
char str[64];
int i = getenv_f("serial#", str, sizeof(str));
puts ("Board: ");
if (i == -1) {
puts ("### No HW ID - assuming PPChameleonEVB");
} else {
puts(str);
}
putc ('\n');
return 0;
}
/* ------------------------------------------------------------------------- */
int testdram (void)
{
/* TODO: XXX XXX XXX */
printf ("test: 16 MB - ok\n");
return (0);
}
/* ------------------------------------------------------------------------- */
#ifdef CONFIG_CFB_CONSOLE
# ifdef CONFIG_CONSOLE_EXTRA_INFO
# include <video_fb.h>
extern GraphicDevice smi;
void video_get_info_str (int line_number, char *info)
{
uint pvr = get_pvr ();
/* init video info strings for graphic console */
switch (line_number) {
case 1:
switch (pvr) {
case PVR_405EP_RB:
sprintf (info, " AMCC PowerPC 405EP Rev. B");
break;
default:
sprintf (info, " AMCC PowerPC 405EP Rev. <unknown>");
break;
}
return;
case 2:
sprintf (info, " DAVE Srl PPChameleonEVB - www.dave-tech.it");
return;
case 3:
sprintf (info, " %s", smi.modeIdent);
return;
}
/* no more info lines */
*info = 0;
return;
}
# endif /* CONFIG_CONSOLE_EXTRA_INFO */
#endif /* CONFIG_CFB_CONSOLE */