upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/board/samsung/universal_c210/universal.c

322 lines
7.3 KiB

/*
* Copyright (C) 2010 Samsung Electronics
* Minkyu Kang <mk7.kang@samsung.com>
* Kyungmin Park <kyungmin.park@samsung.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/io.h>
#include <asm/arch/adc.h>
#include <asm/arch/gpio.h>
#include <asm/arch/mmc.h>
#include <pmic.h>
#include <usb/s3c_udc.h>
#include <asm/arch/cpu.h>
#include <max8998_pmic.h>
DECLARE_GLOBAL_DATA_PTR;
struct exynos4_gpio_part1 *gpio1;
struct exynos4_gpio_part2 *gpio2;
unsigned int board_rev;
u32 get_board_rev(void)
{
return board_rev;
}
static int get_hwrev(void)
{
return board_rev & 0xFF;
}
static void check_hw_revision(void);
int board_init(void)
{
gpio1 = (struct exynos4_gpio_part1 *) EXYNOS4_GPIO_PART1_BASE;
gpio2 = (struct exynos4_gpio_part2 *) EXYNOS4_GPIO_PART2_BASE;
gd->bd->bi_arch_number = MACH_TYPE_UNIVERSAL_C210;
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
#if defined(CONFIG_PMIC)
pmic_init();
#endif
check_hw_revision();
printf("HW Revision:\t0x%x\n", board_rev);
return 0;
}
int dram_init(void)
{
gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE) +
get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE);
return 0;
}
void dram_init_banksize(void)
{
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
}
static unsigned short get_adc_value(int channel)
{
struct s5p_adc *adc = (struct s5p_adc *)samsung_get_base_adc();
unsigned short ret = 0;
unsigned int reg;
unsigned int loop = 0;
writel(channel & 0xF, &adc->adcmux);
writel((1 << 14) | (49 << 6), &adc->adccon);
writel(1000 & 0xffff, &adc->adcdly);
writel(readl(&adc->adccon) | (1 << 16), &adc->adccon); /* 12 bit */
udelay(10);
writel(readl(&adc->adccon) | (1 << 0), &adc->adccon); /* Enable */
udelay(10);
do {
udelay(1);
reg = readl(&adc->adccon);
} while (!(reg & (1 << 15)) && (loop++ < 1000));
ret = readl(&adc->adcdat0) & 0xFFF;
return ret;
}
static int adc_power_control(int on)
{
int ret;
struct pmic *p = get_pmic();
if (pmic_probe(p))
return -1;
ret = pmic_set_output(p,
MAX8998_REG_ONOFF1,
MAX8998_LDO4, !!on);
return ret;
}
static unsigned int get_hw_revision(void)
{
int hwrev, mode0, mode1;
adc_power_control(1);
mode0 = get_adc_value(1); /* HWREV_MODE0 */
mode1 = get_adc_value(2); /* HWREV_MODE1 */
/*
* XXX Always set the default hwrev as the latest board
* ADC = (voltage) / 3.3 * 4096
*/
hwrev = 3;
#define IS_RANGE(x, min, max) ((x) > (min) && (x) < (max))
if (IS_RANGE(mode0, 80, 200) && IS_RANGE(mode1, 80, 200))
hwrev = 0x0; /* 0.01V 0.01V */
if (IS_RANGE(mode0, 750, 1000) && IS_RANGE(mode1, 80, 200))
hwrev = 0x1; /* 610mV 0.01V */
if (IS_RANGE(mode0, 1300, 1700) && IS_RANGE(mode1, 80, 200))
hwrev = 0x2; /* 1.16V 0.01V */
if (IS_RANGE(mode0, 2000, 2400) && IS_RANGE(mode1, 80, 200))
hwrev = 0x3; /* 1.79V 0.01V */
#undef IS_RANGE
debug("mode0: %d, mode1: %d, hwrev 0x%x\n", mode0, mode1, hwrev);
adc_power_control(0);
return hwrev;
}
static void check_hw_revision(void)
{
int hwrev;
hwrev = get_hw_revision();
board_rev |= hwrev;
}
#ifdef CONFIG_DISPLAY_BOARDINFO
int checkboard(void)
{
puts("Board:\tUniversal C210\n");
return 0;
}
#endif
#ifdef CONFIG_GENERIC_MMC
int board_mmc_init(bd_t *bis)
{
int i, err;
switch (get_hwrev()) {
case 0:
/*
* Set the low to enable LDO_EN
* But when you use the test board for eMMC booting
* you should set it HIGH since it removes the inverter
*/
/* MASSMEMORY_EN: XMDMDATA_6: GPE3[6] */
s5p_gpio_direction_output(&gpio1->e3, 6, 0);
break;
default:
/*
* Default reset state is High and there's no inverter
* But set it as HIGH to ensure
*/
/* MASSMEMORY_EN: XMDMADDR_3: GPE1[3] */
s5p_gpio_direction_output(&gpio1->e1, 3, 1);
break;
}
/*
* eMMC GPIO:
* SDR 8-bit@48MHz at MMC0
* GPK0[0] SD_0_CLK(2)
* GPK0[1] SD_0_CMD(2)
* GPK0[2] SD_0_CDn -> Not used
* GPK0[3:6] SD_0_DATA[0:3](2)
* GPK1[3:6] SD_0_DATA[0:3](3)
*
* DDR 4-bit@26MHz at MMC4
* GPK0[0] SD_4_CLK(3)
* GPK0[1] SD_4_CMD(3)
* GPK0[2] SD_4_CDn -> Not used
* GPK0[3:6] SD_4_DATA[0:3](3)
* GPK1[3:6] SD_4_DATA[4:7](4)
*/
for (i = 0; i < 7; i++) {
if (i == 2)
continue;
/* GPK0[0:6] special function 2 */
s5p_gpio_cfg_pin(&gpio2->k0, i, 0x2);
/* GPK0[0:6] pull disable */
s5p_gpio_set_pull(&gpio2->k0, i, GPIO_PULL_NONE);
/* GPK0[0:6] drv 4x */
s5p_gpio_set_drv(&gpio2->k0, i, GPIO_DRV_4X);
}
for (i = 3; i < 7; i++) {
/* GPK1[3:6] special function 3 */
s5p_gpio_cfg_pin(&gpio2->k1, i, 0x3);
/* GPK1[3:6] pull disable */
s5p_gpio_set_pull(&gpio2->k1, i, GPIO_PULL_NONE);
/* GPK1[3:6] drv 4x */
s5p_gpio_set_drv(&gpio2->k1, i, GPIO_DRV_4X);
}
/* T-flash detect */
s5p_gpio_cfg_pin(&gpio2->x3, 4, 0xf);
s5p_gpio_set_pull(&gpio2->x3, 4, GPIO_PULL_UP);
/*
* MMC device init
* mmc0 : eMMC (8-bit buswidth)
* mmc2 : SD card (4-bit buswidth)
*/
err = s5p_mmc_init(0, 8);
/*
* Check the T-flash detect pin
* GPX3[4] T-flash detect pin
*/
if (!s5p_gpio_get_value(&gpio2->x3, 4)) {
/*
* SD card GPIO:
* GPK2[0] SD_2_CLK(2)
* GPK2[1] SD_2_CMD(2)
* GPK2[2] SD_2_CDn -> Not used
* GPK2[3:6] SD_2_DATA[0:3](2)
*/
for (i = 0; i < 7; i++) {
if (i == 2)
continue;
/* GPK2[0:6] special function 2 */
s5p_gpio_cfg_pin(&gpio2->k2, i, 0x2);
/* GPK2[0:6] pull disable */
s5p_gpio_set_pull(&gpio2->k2, i, GPIO_PULL_NONE);
/* GPK2[0:6] drv 4x */
s5p_gpio_set_drv(&gpio2->k2, i, GPIO_DRV_4X);
}
err = s5p_mmc_init(2, 4);
}
return err;
}
#endif
#ifdef CONFIG_USB_GADGET
static int s5pc210_phy_control(int on)
{
int ret = 0;
struct pmic *p = get_pmic();
if (pmic_probe(p))
return -1;
if (on) {
ret |= pmic_set_output(p,
MAX8998_REG_BUCK_ACTIVE_DISCHARGE3,
MAX8998_SAFEOUT1, LDO_ON);
ret |= pmic_set_output(p, MAX8998_REG_ONOFF1,
MAX8998_LDO3, LDO_ON);
ret |= pmic_set_output(p, MAX8998_REG_ONOFF2,
MAX8998_LDO8, LDO_ON);
} else {
ret |= pmic_set_output(p, MAX8998_REG_ONOFF2,
MAX8998_LDO8, LDO_OFF);
ret |= pmic_set_output(p, MAX8998_REG_ONOFF1,
MAX8998_LDO3, LDO_OFF);
ret |= pmic_set_output(p,
MAX8998_REG_BUCK_ACTIVE_DISCHARGE3,
MAX8998_SAFEOUT1, LDO_OFF);
}
if (ret) {
puts("MAX8998 LDO setting error!\n");
return -1;
}
return 0;
}
struct s3c_plat_otg_data s5pc210_otg_data = {
.phy_control = s5pc210_phy_control,
.regs_phy = EXYNOS4_USBPHY_BASE,
.regs_otg = EXYNOS4_USBOTG_BASE,
.usb_phy_ctrl = EXYNOS4_USBPHY_CONTROL,
.usb_flags = PHY0_SLEEP,
};
#endif