upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/board/MAI/AmigaOneG3SE/board_asm_init.S

157 lines
2.6 KiB

#include "macros.h"
#define GLOBALINFO0 0x50
#define GLOBALINFO0_BO (1<<7)
#define GLOBALINFO2_B1ARBITER (1<<6)
#define HBUSACR0 0x5c
#define HBUSACR2_BURST (1<<0)
#define HBUSACR2_LAT (1<<1)
#define RECEIVER_HOLDING 0
#define TRANSMITTER_HOLDING 0
#define INTERRUPT_ENABLE 1
#define INTERRUPT_STATUS 2
#define FIFO_CONTROL 2
#define LINE_CONTROL 3
#define MODEM_CONTROL 4
#define LINE_STATUS 5
#define MODEM_STATUS 6
#define SCRATCH_PAD 7
#define DIVISOR_LATCH_LSB 0
#define DIVISOR_LATCH_MSB 1
#define PRESCALER_DIVISION 5
#define UART(x) (0x3f8+(x))
#define GLOBALINFO0 0x50
#define GLOBALINFO0_BO (1<<7)
#define GLOBALINFO2_B1ARBITER (1<<6)
#define HBUSACR0 0x5c
#define HBUSACR2_BURST (1<<0)
#define HBUSACR2_LAT (1<<1)
#define SUPERIO_1 ((7 << 3) | (0))
#define SUPERIO_2 ((7 << 3) | (1))
.globl board_asm_init
board_asm_init:
mflr r29
/* Set 'Must-set' register */
li r3, 0
li r4, 0
li r5, 0x5e
bl pci_read_cfg_byte
ori r3, r3, (1<<1)
xori r6, r3, (1<<1)
li r3, 0
bl pci_write_cfg_byte
li r3, 0
li r5, 0x52
bl pci_read_cfg_byte
ori r6, r3, (1<<6)
li r3, 0
bl pci_write_cfg_byte
li r3, 0
li r4, 0x08
li r5, 0xd2
bl pci_read_cfg_byte
ori r6, r3, (1<<2)
li r3, 0
bl pci_write_cfg_byte
/* Do PCI reset */
/* li r3, 0
li r4, 0x38
li r5, 0x47
bl pci_read_cfg_byte
ori r6, r3, 0x01
li r3, 0
li r4, 0x38
li r5, 0x47
bl pci_write_cfg_byte*/
/* Enable NVRAM for environment */
li r3, 0
li r4, 0
li r5, 0x56
li r6, 0x0B
bl pci_write_cfg_byte
/* Init Super-I/O chips */
siowb 0x40, 0x08
siowb 0x41, 0x01
siowb 0x45, 0x80
siowb 0x46, 0x60
siowb 0x47, 0x20
siowb 0x48, 0x01
siowb 0x4a, 0xc4
siowb 0x50, 0x0e
siowb 0x51, 0x76
siowb 0x52, 0x34
siowb 0x54, 0x00
siowb 0x55, 0x90
siowb 0x56, 0x99
siowb 0x57, 0x90
siowb 0x85, 0x01
/* Enable configuration mode for SuperIO */
li r3, 0
li r4, (7<<3)
li r5, 0x85
bl pci_read_cfg_byte
ori r6, r3, 0x02
mr r31, r6
li r3,0
bl pci_write_cfg_byte
/* COM1 as 3f8 */
outb 0x3f0, 0xe7
outb 0x3f1, 0xfe
/* COM2 as 2f8 */
outb 0x3f0, 0xe8
outb 0x3f1, 0xeb
/* Enable */
outb 0x3f0, 0xe2
inb r3, 0x3f1
ori r3, r3, 0x0c
outb 0x3f0, 0xe2
outbr 0x3f1, r3
/* Disable configuration mode */
li r3, 0
li r4, (7<<3)
li r5, 0x85
mr r6, r31
bl pci_write_cfg_byte
/* Set line control */
outb UART(LINE_CONTROL), 0x83
outb UART(DIVISOR_LATCH_LSB), 0x0c
outb UART(DIVISOR_LATCH_MSB), 0x00
outb UART(LINE_CONTROL), 0x3
mtlr r29
blr
.globl new_reset
.globl new_reset_end
new_reset:
li r0, 0x100
oris r0, r0, 0xFFF0
mtlr r0
blr
new_reset_end: