upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/board/siemens/CCM/fpga_ccm.c

170 lines
4.5 KiB

/*
* (C) Copyright 2002
* Wolfgang Grandegger, DENX Software Engineering, wg@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <mpc8xx.h>
#include <commproc.h>
#include <common.h>
#include "../common/fpga.h"
fpga_t fpga_list[] = {
{ "PUMA" , PUMA_CONF_BASE ,
CFG_PC_PUMA_INIT , CFG_PC_PUMA_PROG , CFG_PC_PUMA_DONE }
};
int fpga_count = sizeof(fpga_list) / sizeof(fpga_t);
void can_driver_enable (void);
void can_driver_disable (void);
#define _NOT_USED_ 0xFFFFFFFF
/*
* PUMA access using UPM B
*/
const uint puma_table[] =
{
/*
* Single Read. (Offset 0 in UPM RAM)
*/
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
_NOT_USED_,
/*
* Precharge and MRS
*/
_NOT_USED_, _NOT_USED_, _NOT_USED_,
/*
* Burst Read. (Offset 8 in UPM RAM)
*/
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
/*
* Single Write. (Offset 18 in UPM RAM)
*/
0x0FFCF804, 0x0FFCF400, 0x3FFDFC47, /* last */
_NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
/*
* Burst Write. (Offset 20 in UPM RAM)
*/
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
/*
* Refresh (Offset 30 in UPM RAM)
*/
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
/*
* Exception. (Offset 3c in UPM RAM)
*/
0x7FFFFC07, /* last */
_NOT_USED_, _NOT_USED_, _NOT_USED_,
};
ulong fpga_control (fpga_t* fpga, int cmd)
{
volatile immap_t *immr = (immap_t *)CFG_IMMR;
volatile memctl8xx_t *memctl = &immr->im_memctl;
switch (cmd) {
case FPGA_INIT_IS_HIGH:
immr->im_ioport.iop_pcdir &= ~fpga->init_mask; /* input */
return (immr->im_ioport.iop_pcdat & fpga->init_mask) ? 1:0;
case FPGA_INIT_SET_LOW:
immr->im_ioport.iop_pcdir |= fpga->init_mask; /* output */
immr->im_ioport.iop_pcdat &= ~fpga->init_mask;
break;
case FPGA_INIT_SET_HIGH:
immr->im_ioport.iop_pcdir |= fpga->init_mask; /* output */
immr->im_ioport.iop_pcdat |= fpga->init_mask;
break;
case FPGA_PROG_SET_LOW:
immr->im_ioport.iop_pcdat &= ~fpga->prog_mask;
break;
case FPGA_PROG_SET_HIGH:
immr->im_ioport.iop_pcdat |= fpga->prog_mask;
break;
case FPGA_DONE_IS_HIGH:
return (immr->im_ioport.iop_pcdat & fpga->done_mask) ? 1:0;
case FPGA_READ_MODE:
/* disable FPGA in memory controller */
memctl->memc_br4 = 0;
memctl->memc_or4 = PUMA_CONF_OR_READ;
memctl->memc_br4 = PUMA_CONF_BR_READ;
/* (re-) enable CAN drivers */
can_driver_enable ();
break;
case FPGA_LOAD_MODE:
/* disable FPGA in memory controller */
memctl->memc_br4 = 0;
/*
* We must disable the CAN drivers first because
* they use UPM B, too.
*/
can_driver_disable ();
/*
* Configure UPMB for FPGA
*/
upmconfig(UPMB,(uint *)puma_table,sizeof(puma_table)/sizeof(uint));
memctl->memc_or4 = PUMA_CONF_OR_LOAD;
memctl->memc_br4 = PUMA_CONF_BR_LOAD;
break;
case FPGA_GET_ID:
return *(volatile ulong *)fpga->conf_base;
case FPGA_INIT_PORTS:
immr->im_ioport.iop_pcpar &= ~fpga->init_mask; /* INIT I/O */
immr->im_ioport.iop_pcso &= ~fpga->init_mask;
immr->im_ioport.iop_pcdir &= ~fpga->init_mask;
immr->im_ioport.iop_pcpar &= ~fpga->prog_mask; /* PROG Output */
immr->im_ioport.iop_pcso &= ~fpga->prog_mask;
immr->im_ioport.iop_pcdir |= fpga->prog_mask;
immr->im_ioport.iop_pcpar &= ~fpga->done_mask; /* DONE Input */
immr->im_ioport.iop_pcso &= ~fpga->done_mask;
immr->im_ioport.iop_pcdir &= ~fpga->done_mask;
break;
}
return 0;
}