upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/board/amcc/katmai/katmai.c

287 lines
15 KiB

/*
* (C) Copyright 2007-2009
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
*/
#include <common.h>
#include <asm/ppc4xx.h>
#include <i2c.h>
#include <libfdt.h>
#include <fdt_support.h>
#include <netdev.h>
#include <asm/processor.h>
#include <asm/io.h>
#include <asm/ppc4xx-gpio.h>
#include <asm/4xx_pcie.h>
#include <asm/errno.h>
DECLARE_GLOBAL_DATA_PTR;
int board_early_init_f (void)
{
unsigned long mfr;
/*----------------------------------------------------------------------+
* Interrupt controller setup for the Katmai 440SPe Evaluation board.
*-----------------------------------------------------------------------+
*-----------------------------------------------------------------------+
* Interrupt | Source | Pol. | Sensi.| Crit. |
*-----------+-----------------------------------+-------+-------+-------+
* IRQ 00 | UART0 | High | Level | Non |
* IRQ 01 | UART1 | High | Level | Non |
* IRQ 02 | IIC0 | High | Level | Non |
* IRQ 03 | IIC1 | High | Level | Non |
* IRQ 04 | PCI0X0 MSG IN | High | Level | Non |
* IRQ 05 | PCI0X0 CMD Write | High | Level | Non |
* IRQ 06 | PCI0X0 Power Mgt | High | Level | Non |
* IRQ 07 | PCI0X0 VPD Access | Rising| Edge | Non |
* IRQ 08 | PCI0X0 MSI level 0 | High | Lvl/ed| Non |
* IRQ 09 | External IRQ 15 - (PCI-Express) | pgm H | Pgm | Non |
* IRQ 10 | UIC2 Non-critical Int. | NA | NA | Non |
* IRQ 11 | UIC2 Critical Interrupt | NA | NA | Crit |
* IRQ 12 | PCI Express MSI Level 0 | Rising| Edge | Non |
* IRQ 13 | PCI Express MSI Level 1 | Rising| Edge | Non |
* IRQ 14 | PCI Express MSI Level 2 | Rising| Edge | Non |
* IRQ 15 | PCI Express MSI Level 3 | Rising| Edge | Non |
* IRQ 16 | UIC3 Non-critical Int. | NA | NA | Non |
* IRQ 17 | UIC3 Critical Interrupt | NA | NA | Crit |
* IRQ 18 | External IRQ 14 - (PCI-Express) | Pgm | Pgm | Non |
* IRQ 19 | DMA Channel 0 FIFO Full | High | Level | Non |
* IRQ 20 | DMA Channel 0 Stat FIFO | High | Level | Non |
* IRQ 21 | DMA Channel 1 FIFO Full | High | Level | Non |
* IRQ 22 | DMA Channel 1 Stat FIFO | High | Level | Non |
* IRQ 23 | I2O Inbound Doorbell | High | Level | Non |
* IRQ 24 | Inbound Post List FIFO Not Empt | High | Level | Non |
* IRQ 25 | I2O Region 0 LL PLB Write | High | Level | Non |
* IRQ 26 | I2O Region 1 LL PLB Write | High | Level | Non |
* IRQ 27 | I2O Region 0 HB PLB Write | High | Level | Non |
* IRQ 28 | I2O Region 1 HB PLB Write | High | Level | Non |
* IRQ 29 | GPT Down Count Timer | Rising| Edge | Non |
* IRQ 30 | UIC1 Non-critical Int. | NA | NA | Non |
* IRQ 31 | UIC1 Critical Interrupt | NA | NA | Crit. |
*------------------------------------------------------------------------
* IRQ 32 | Ext. IRQ 13 - (PCI-Express) |pgm (H)|pgm/Lvl| Non |
* IRQ 33 | MAL Serr | High | Level | Non |
* IRQ 34 | MAL Txde | High | Level | Non |
* IRQ 35 | MAL Rxde | High | Level | Non |
* IRQ 36 | DMC CE or DMC UE | High | Level | Non |
* IRQ 37 | EBC or UART2 | High |Lvl Edg| Non |
* IRQ 38 | MAL TX EOB | High | Level | Non |
* IRQ 39 | MAL RX EOB | High | Level | Non |
* IRQ 40 | PCIX0 MSI Level 1 | High |Lvl Edg| Non |
* IRQ 41 | PCIX0 MSI level 2 | High |Lvl Edg| Non |
* IRQ 42 | PCIX0 MSI level 3 | High |Lvl Edg| Non |
* IRQ 43 | L2 Cache | Risin | Edge | Non |
* IRQ 44 | GPT Compare Timer 0 | Risin | Edge | Non |
* IRQ 45 | GPT Compare Timer 1 | Risin | Edge | Non |
* IRQ 46 | GPT Compare Timer 2 | Risin | Edge | Non |
* IRQ 47 | GPT Compare Timer 3 | Risin | Edge | Non |
* IRQ 48 | GPT Compare Timer 4 | Risin | Edge | Non |
* IRQ 49 | Ext. IRQ 12 - PCI-X |pgm/Fal|pgm/Lvl| Non |
* IRQ 50 | Ext. IRQ 11 - |pgm (H)|pgm/Lvl| Non |
* IRQ 51 | Ext. IRQ 10 - |pgm (H)|pgm/Lvl| Non |
* IRQ 52 | Ext. IRQ 9 |pgm (H)|pgm/Lvl| Non |
* IRQ 53 | Ext. IRQ 8 |pgm (H)|pgm/Lvl| Non |
* IRQ 54 | DMA Error | High | Level | Non |
* IRQ 55 | DMA I2O Error | High | Level | Non |
* IRQ 56 | Serial ROM | High | Level | Non |
* IRQ 57 | PCIX0 Error | High | Edge | Non |
* IRQ 58 | Ext. IRQ 7- |pgm (H)|pgm/Lvl| Non |
* IRQ 59 | Ext. IRQ 6- |pgm (H)|pgm/Lvl| Non |
* IRQ 60 | EMAC0 Interrupt | High | Level | Non |
* IRQ 61 | EMAC0 Wake-up | High | Level | Non |
* IRQ 62 | Reserved | High | Level | Non |
* IRQ 63 | XOR | High | Level | Non |
*-----------------------------------------------------------------------
* IRQ 64 | PE0 AL | High | Level | Non |
* IRQ 65 | PE0 VPD Access | Risin | Edge | Non |
* IRQ 66 | PE0 Hot Reset Request | Risin | Edge | Non |
* IRQ 67 | PE0 Hot Reset Request | Falli | Edge | Non |
* IRQ 68 | PE0 TCR | High | Level | Non |
* IRQ 69 | PE0 BusMaster VCO | Falli | Edge | Non |
* IRQ 70 | PE0 DCR Error | High | Level | Non |
* IRQ 71 | Reserved | N/A | N/A | Non |
* IRQ 72 | PE1 AL | High | Level | Non |
* IRQ 73 | PE1 VPD Access | Risin | Edge | Non |
* IRQ 74 | PE1 Hot Reset Request | Risin | Edge | Non |
* IRQ 75 | PE1 Hot Reset Request | Falli | Edge | Non |
* IRQ 76 | PE1 TCR | High | Level | Non |
* IRQ 77 | PE1 BusMaster VCO | Falli | Edge | Non |
* IRQ 78 | PE1 DCR Error | High | Level | Non |
* IRQ 79 | Reserved | N/A | N/A | Non |
* IRQ 80 | PE2 AL | High | Level | Non |
* IRQ 81 | PE2 VPD Access | Risin | Edge | Non |
* IRQ 82 | PE2 Hot Reset Request | Risin | Edge | Non |
* IRQ 83 | PE2 Hot Reset Request | Falli | Edge | Non |
* IRQ 84 | PE2 TCR | High | Level | Non |
* IRQ 85 | PE2 BusMaster VCO | Falli | Edge | Non |
* IRQ 86 | PE2 DCR Error | High | Level | Non |
* IRQ 87 | Reserved | N/A | N/A | Non |
* IRQ 88 | External IRQ(5) | Progr | Progr | Non |
* IRQ 89 | External IRQ 4 - Ethernet | Progr | Progr | Non |
* IRQ 90 | External IRQ 3 - PCI-X | Progr | Progr | Non |
* IRQ 91 | External IRQ 2 - PCI-X | Progr | Progr | Non |
* IRQ 92 | External IRQ 1 - PCI-X | Progr | Progr | Non |
* IRQ 93 | External IRQ 0 - PCI-X | Progr | Progr | Non |
* IRQ 94 | Reserved | N/A | N/A | Non |
* IRQ 95 | Reserved | N/A | N/A | Non |
*-----------------------------------------------------------------------
* IRQ 96 | PE0 INTA | High | Level | Non |
* IRQ 97 | PE0 INTB | High | Level | Non |
* IRQ 98 | PE0 INTC | High | Level | Non |
* IRQ 99 | PE0 INTD | High | Level | Non |
* IRQ 100 | PE1 INTA | High | Level | Non |
* IRQ 101 | PE1 INTB | High | Level | Non |
* IRQ 102 | PE1 INTC | High | Level | Non |
* IRQ 103 | PE1 INTD | High | Level | Non |
* IRQ 104 | PE2 INTA | High | Level | Non |
* IRQ 105 | PE2 INTB | High | Level | Non |
* IRQ 106 | PE2 INTC | High | Level | Non |
* IRQ 107 | PE2 INTD | Risin | Edge | Non |
* IRQ 108 | PCI Express MSI Level 4 | Risin | Edge | Non |
* IRQ 109 | PCI Express MSI Level 5 | Risin | Edge | Non |
* IRQ 110 | PCI Express MSI Level 6 | Risin | Edge | Non |
* IRQ 111 | PCI Express MSI Level 7 | Risin | Edge | Non |
* IRQ 116 | PCI Express MSI Level 12 | Risin | Edge | Non |
* IRQ 112 | PCI Express MSI Level 8 | Risin | Edge | Non |
* IRQ 113 | PCI Express MSI Level 9 | Risin | Edge | Non |
* IRQ 114 | PCI Express MSI Level 10 | Risin | Edge | Non |
* IRQ 115 | PCI Express MSI Level 11 | Risin | Edge | Non |
* IRQ 117 | PCI Express MSI Level 13 | Risin | Edge | Non |
* IRQ 118 | PCI Express MSI Level 14 | Risin | Edge | Non |
* IRQ 119 | PCI Express MSI Level 15 | Risin | Edge | Non |
* IRQ 120 | PCI Express MSI Level 16 | Risin | Edge | Non |
* IRQ 121 | PCI Express MSI Level 17 | Risin | Edge | Non |
* IRQ 122 | PCI Express MSI Level 18 | Risin | Edge | Non |
* IRQ 123 | PCI Express MSI Level 19 | Risin | Edge | Non |
* IRQ 124 | PCI Express MSI Level 20 | Risin | Edge | Non |
* IRQ 125 | PCI Express MSI Level 21 | Risin | Edge | Non |
* IRQ 126 | PCI Express MSI Level 22 | Risin | Edge | Non |
* IRQ 127 | PCI Express MSI Level 23 | Risin | Edge | Non |
*-----------+-----------------------------------+-------+-------+-------+ */
/*-------------------------------------------------------------------------+
* Put UICs in PowerPC440SPemode.
* Initialise UIC registers. Clear all interrupts. Disable all interrupts.
* Set critical interrupt values. Set interrupt polarities. Set interrupt
* trigger levels. Make bit 0 High priority. Clear all interrupts again.
*------------------------------------------------------------------------*/
mtdcr (UIC3SR, 0xffffffff); /* Clear all interrupts */
mtdcr (UIC3ER, 0x00000000); /* disable all interrupts */
mtdcr (UIC3CR, 0x00000000); /* Set Critical / Non Critical interrupts: */
mtdcr (UIC3PR, 0xffffffff); /* Set Interrupt Polarities*/
mtdcr (UIC3TR, 0x001fffff); /* Set Interrupt Trigger Levels */
mtdcr (UIC3VR, 0x00000001); /* Set Vect base=0,INT31 Highest priority */
mtdcr (UIC3SR, 0x00000000); /* clear all interrupts*/
mtdcr (UIC3SR, 0xffffffff); /* clear all interrupts*/
mtdcr (UIC2SR, 0xffffffff); /* Clear all interrupts */
mtdcr (UIC2ER, 0x00000000); /* disable all interrupts*/
mtdcr (UIC2CR, 0x00000000); /* Set Critical / Non Critical interrupts*/
mtdcr (UIC2PR, 0xebebebff); /* Set Interrupt Polarities*/
mtdcr (UIC2TR, 0x74747400); /* Set Interrupt Trigger Levels */
mtdcr (UIC2VR, 0x00000001); /* Set Vect base=0,INT31 Highest priority */
mtdcr (UIC2SR, 0x00000000); /* clear all interrupts */
mtdcr (UIC2SR, 0xffffffff); /* clear all interrupts */
mtdcr (UIC1SR, 0xffffffff); /* Clear all interrupts*/
mtdcr (UIC1ER, 0x00000000); /* disable all interrupts*/
mtdcr (UIC1CR, 0x00000000); /* Set Critical / Non Critical interrupts*/
mtdcr (UIC1PR, 0xffffffff); /* Set Interrupt Polarities */
mtdcr (UIC1TR, 0x001f8040); /* Set Interrupt Trigger Levels*/
mtdcr (UIC1VR, 0x00000001); /* Set Vect base=0,INT31 Highest priority */
mtdcr (UIC1SR, 0x00000000); /* clear all interrupts*/
mtdcr (UIC1SR, 0xffffffff); /* clear all interrupts*/
mtdcr (UIC0SR, 0xffffffff); /* Clear all interrupts */
mtdcr (UIC0ER, 0x00000000); /* disable all interrupts excepted cascade to be checked */
mtdcr (UIC0CR, 0x00104001); /* Set Critical / Non Critical interrupts*/
mtdcr (UIC0PR, 0xffffffff); /* Set Interrupt Polarities*/
mtdcr (UIC0TR, 0x010f0004); /* Set Interrupt Trigger Levels */
mtdcr (UIC0VR, 0x00000001); /* Set Vect base=0,INT31 Highest priority */
mtdcr (UIC0SR, 0x00000000); /* clear all interrupts*/
mtdcr (UIC0SR, 0xffffffff); /* clear all interrupts*/
mfsdr(SDR0_MFR, mfr);
mfr |= SDR0_MFR_FIXD; /* Workaround for PCI/DMA */
mtsdr(SDR0_MFR, mfr);
mtsdr(SDR0_PFC0, CONFIG_SYS_PFC0);
out32(GPIO0_OR, CONFIG_SYS_GPIO_OR);
out32(GPIO0_ODR, CONFIG_SYS_GPIO_ODR);
out32(GPIO0_TCR, CONFIG_SYS_GPIO_TCR);
return 0;
}
int checkboard (void)
{
char buf[64];
int i = getenv_f("serial#", buf, sizeof(buf));
printf("Board: Katmai - AMCC 440SPe Evaluation Board");
if (i > 0) {
puts(", serial# ");
puts(buf);
}
putc('\n');
return 0;
}
/*
* Override the default functions in arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c with
* board specific values.
*/
u32 ddr_wrdtr(u32 default_val) {
return (SDRAM_WRDTR_LLWP_1_CYC | SDRAM_WRDTR_WTR_180_DEG_ADV | 0x823);
}
u32 ddr_clktr(u32 default_val) {
return (SDRAM_CLKTR_CLKP_90_DEG_ADV);
}
#if defined(CONFIG_PCI)
int board_pcie_card_present(int port)
{
u32 val;
val = in32(GPIO0_IR);
switch (port) {
case 0:
return !(val & GPIO_VAL(CONFIG_SYS_GPIO_PCIE_PRESENT0));
case 1:
return !(val & GPIO_VAL(CONFIG_SYS_GPIO_PCIE_PRESENT1));
case 2:
return !(val & GPIO_VAL(CONFIG_SYS_GPIO_PCIE_PRESENT2));
default:
return 0;
}
}
#endif /* defined(CONFIG_PCI) */
int board_eth_init(bd_t *bis)
{
cpu_eth_init(bis);
return pci_eth_init(bis);
}