upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
795 lines
18 KiB
795 lines
18 KiB
/*
|
|
* (C) Copyright 2003-2007
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* Derived from the MPC8xx FEC driver.
|
|
* Adapted for MPC512x by Grzegorz Bernacki <gjb@semihalf.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <mpc512x.h>
|
|
#include <malloc.h>
|
|
#include <net.h>
|
|
#include <netdev.h>
|
|
#include <miiphy.h>
|
|
#include "mpc512x_fec.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define DEBUG 0
|
|
|
|
#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) && \
|
|
defined(CONFIG_MPC512x_FEC)
|
|
|
|
#if !(defined(CONFIG_MII) || defined(CONFIG_CMD_MII))
|
|
#error "CONFIG_MII has to be defined!"
|
|
#endif
|
|
|
|
#if (DEBUG & 0x40)
|
|
static uint32 local_crc32(char *string, unsigned int crc_value, int len);
|
|
#endif
|
|
|
|
int fec512x_miiphy_read(char *devname, uint8 phyAddr, uint8 regAddr, uint16 * retVal);
|
|
int fec512x_miiphy_write(char *devname, uint8 phyAddr, uint8 regAddr, uint16 data);
|
|
int mpc512x_fec_init_phy(struct eth_device *dev, bd_t * bis);
|
|
|
|
static uchar rx_buff[FEC_BUFFER_SIZE];
|
|
static int rx_buff_idx = 0;
|
|
|
|
/********************************************************************/
|
|
#if (DEBUG & 0x2)
|
|
static void mpc512x_fec_phydump (char *devname)
|
|
{
|
|
uint16 phyStatus, i;
|
|
uint8 phyAddr = CONFIG_PHY_ADDR;
|
|
uint8 reg_mask[] = {
|
|
/* regs to print: 0...8, 21,27,31 */
|
|
1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0,
|
|
0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 1,
|
|
};
|
|
|
|
for (i = 0; i < 32; i++) {
|
|
if (reg_mask[i]) {
|
|
miiphy_read (devname, phyAddr, i, &phyStatus);
|
|
printf ("Mii reg %d: 0x%04x\n", i, phyStatus);
|
|
}
|
|
}
|
|
}
|
|
#endif
|
|
|
|
/********************************************************************/
|
|
static int mpc512x_fec_bd_init (mpc512x_fec_priv *fec)
|
|
{
|
|
int ix;
|
|
|
|
/*
|
|
* Receive BDs init
|
|
*/
|
|
for (ix = 0; ix < FEC_RBD_NUM; ix++) {
|
|
fec->bdBase->rbd[ix].dataPointer = (uint32)&fec->bdBase->recv_frames[ix];
|
|
fec->bdBase->rbd[ix].status = FEC_RBD_EMPTY;
|
|
fec->bdBase->rbd[ix].dataLength = 0;
|
|
}
|
|
|
|
/*
|
|
* have the last RBD to close the ring
|
|
*/
|
|
fec->bdBase->rbd[ix - 1].status |= FEC_RBD_WRAP;
|
|
fec->rbdIndex = 0;
|
|
|
|
/*
|
|
* Trasmit BDs init
|
|
*/
|
|
for (ix = 0; ix < FEC_TBD_NUM; ix++) {
|
|
fec->bdBase->tbd[ix].status = 0;
|
|
}
|
|
|
|
/*
|
|
* Have the last TBD to close the ring
|
|
*/
|
|
fec->bdBase->tbd[ix - 1].status |= FEC_TBD_WRAP;
|
|
|
|
/*
|
|
* Initialize some indices
|
|
*/
|
|
fec->tbdIndex = 0;
|
|
fec->usedTbdIndex = 0;
|
|
fec->cleanTbdNum = FEC_TBD_NUM;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/********************************************************************/
|
|
static void mpc512x_fec_rbd_clean (mpc512x_fec_priv *fec, volatile FEC_RBD * pRbd)
|
|
{
|
|
/*
|
|
* Reset buffer descriptor as empty
|
|
*/
|
|
if ((fec->rbdIndex) == (FEC_RBD_NUM - 1))
|
|
pRbd->status = (FEC_RBD_WRAP | FEC_RBD_EMPTY);
|
|
else
|
|
pRbd->status = FEC_RBD_EMPTY;
|
|
|
|
pRbd->dataLength = 0;
|
|
|
|
/*
|
|
* Increment BD count
|
|
*/
|
|
fec->rbdIndex = (fec->rbdIndex + 1) % FEC_RBD_NUM;
|
|
|
|
/*
|
|
* Now, we have an empty RxBD, notify FEC
|
|
*/
|
|
fec->eth->r_des_active = 0x01000000; /* Descriptor polling active */
|
|
}
|
|
|
|
/********************************************************************/
|
|
static void mpc512x_fec_tbd_scrub (mpc512x_fec_priv *fec)
|
|
{
|
|
volatile FEC_TBD *pUsedTbd;
|
|
|
|
#if (DEBUG & 0x1)
|
|
printf ("tbd_scrub: fec->cleanTbdNum = %d, fec->usedTbdIndex = %d\n",
|
|
fec->cleanTbdNum, fec->usedTbdIndex);
|
|
#endif
|
|
|
|
/*
|
|
* process all the consumed TBDs
|
|
*/
|
|
while (fec->cleanTbdNum < FEC_TBD_NUM) {
|
|
pUsedTbd = &fec->bdBase->tbd[fec->usedTbdIndex];
|
|
if (pUsedTbd->status & FEC_TBD_READY) {
|
|
#if (DEBUG & 0x20)
|
|
printf ("Cannot clean TBD %d, in use\n", fec->usedTbdIndex);
|
|
#endif
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* clean this buffer descriptor
|
|
*/
|
|
if (fec->usedTbdIndex == (FEC_TBD_NUM - 1))
|
|
pUsedTbd->status = FEC_TBD_WRAP;
|
|
else
|
|
pUsedTbd->status = 0;
|
|
|
|
/*
|
|
* update some indeces for a correct handling of the TBD ring
|
|
*/
|
|
fec->cleanTbdNum++;
|
|
fec->usedTbdIndex = (fec->usedTbdIndex + 1) % FEC_TBD_NUM;
|
|
}
|
|
}
|
|
|
|
/********************************************************************/
|
|
static void mpc512x_fec_set_hwaddr (mpc512x_fec_priv *fec, char *mac)
|
|
{
|
|
uint8 currByte; /* byte for which to compute the CRC */
|
|
int byte; /* loop - counter */
|
|
int bit; /* loop - counter */
|
|
uint32 crc = 0xffffffff; /* initial value */
|
|
|
|
/*
|
|
* The algorithm used is the following:
|
|
* we loop on each of the six bytes of the provided address,
|
|
* and we compute the CRC by left-shifting the previous
|
|
* value by one position, so that each bit in the current
|
|
* byte of the address may contribute the calculation. If
|
|
* the latter and the MSB in the CRC are different, then
|
|
* the CRC value so computed is also ex-ored with the
|
|
* "polynomium generator". The current byte of the address
|
|
* is also shifted right by one bit at each iteration.
|
|
* This is because the CRC generatore in hardware is implemented
|
|
* as a shift-register with as many ex-ores as the radixes
|
|
* in the polynomium. This suggests that we represent the
|
|
* polynomiumm itself as a 32-bit constant.
|
|
*/
|
|
for (byte = 0; byte < 6; byte++) {
|
|
currByte = mac[byte];
|
|
for (bit = 0; bit < 8; bit++) {
|
|
if ((currByte & 0x01) ^ (crc & 0x01)) {
|
|
crc >>= 1;
|
|
crc = crc ^ 0xedb88320;
|
|
} else {
|
|
crc >>= 1;
|
|
}
|
|
currByte >>= 1;
|
|
}
|
|
}
|
|
|
|
crc = crc >> 26;
|
|
|
|
/*
|
|
* Set individual hash table register
|
|
*/
|
|
if (crc >= 32) {
|
|
fec->eth->iaddr1 = (1 << (crc - 32));
|
|
fec->eth->iaddr2 = 0;
|
|
} else {
|
|
fec->eth->iaddr1 = 0;
|
|
fec->eth->iaddr2 = (1 << crc);
|
|
}
|
|
|
|
/*
|
|
* Set physical address
|
|
*/
|
|
fec->eth->paddr1 = (mac[0] << 24) + (mac[1] << 16) + (mac[2] << 8) + mac[3];
|
|
fec->eth->paddr2 = (mac[4] << 24) + (mac[5] << 16) + 0x8808;
|
|
}
|
|
|
|
/********************************************************************/
|
|
static int mpc512x_fec_init (struct eth_device *dev, bd_t * bis)
|
|
{
|
|
mpc512x_fec_priv *fec = (mpc512x_fec_priv *)dev->priv;
|
|
|
|
#if (DEBUG & 0x1)
|
|
printf ("mpc512x_fec_init... Begin\n");
|
|
#endif
|
|
|
|
/* Set interrupt mask register */
|
|
fec->eth->imask = 0x00000000;
|
|
|
|
/* Clear FEC-Lite interrupt event register(IEVENT) */
|
|
fec->eth->ievent = 0xffffffff;
|
|
|
|
/* Set transmit fifo watermark register(X_WMRK), default = 64 */
|
|
fec->eth->x_wmrk = 0x0;
|
|
|
|
/* Set Opcode/Pause Duration Register */
|
|
fec->eth->op_pause = 0x00010020;
|
|
|
|
/* Frame length=1522; MII mode */
|
|
fec->eth->r_cntrl = (FEC_MAX_FRAME_LEN << 16) | 0x24;
|
|
|
|
/* Half-duplex, heartbeat disabled */
|
|
fec->eth->x_cntrl = 0x00000000;
|
|
|
|
/* Enable MIB counters */
|
|
fec->eth->mib_control = 0x0;
|
|
|
|
/* Setup recv fifo start and buff size */
|
|
fec->eth->r_fstart = 0x500;
|
|
fec->eth->r_buff_size = FEC_BUFFER_SIZE;
|
|
|
|
/* Setup BD base addresses */
|
|
fec->eth->r_des_start = (uint32)fec->bdBase->rbd;
|
|
fec->eth->x_des_start = (uint32)fec->bdBase->tbd;
|
|
|
|
/* DMA Control */
|
|
fec->eth->dma_control = 0xc0000000;
|
|
|
|
/* Enable FEC */
|
|
fec->eth->ecntrl |= 0x00000006;
|
|
|
|
/* Initilize addresses and status words of BDs */
|
|
mpc512x_fec_bd_init (fec);
|
|
|
|
/* Descriptor polling active */
|
|
fec->eth->r_des_active = 0x01000000;
|
|
|
|
#if (DEBUG & 0x1)
|
|
printf("mpc512x_fec_init... Done \n");
|
|
#endif
|
|
return 1;
|
|
}
|
|
|
|
/********************************************************************/
|
|
int mpc512x_fec_init_phy (struct eth_device *dev, bd_t * bis)
|
|
{
|
|
mpc512x_fec_priv *fec = (mpc512x_fec_priv *)dev->priv;
|
|
const uint8 phyAddr = CONFIG_PHY_ADDR; /* Only one PHY */
|
|
int timeout = 1;
|
|
uint16 phyStatus;
|
|
|
|
#if (DEBUG & 0x1)
|
|
printf ("mpc512x_fec_init_phy... Begin\n");
|
|
#endif
|
|
|
|
/*
|
|
* Clear FEC-Lite interrupt event register(IEVENT)
|
|
*/
|
|
fec->eth->ievent = 0xffffffff;
|
|
|
|
/*
|
|
* Set interrupt mask register
|
|
*/
|
|
fec->eth->imask = 0x00000000;
|
|
|
|
if (fec->xcv_type != SEVENWIRE) {
|
|
/*
|
|
* Set MII_SPEED = (1/(mii_speed * 2)) * System Clock
|
|
* and do not drop the Preamble.
|
|
*/
|
|
fec->eth->mii_speed = (((gd->ips_clk / 1000000) / 5) + 1) << 1;
|
|
|
|
/*
|
|
* Reset PHY, then delay 300ns
|
|
*/
|
|
miiphy_write (dev->name, phyAddr, 0x0, 0x8000);
|
|
udelay (1000);
|
|
|
|
if (fec->xcv_type == MII10) {
|
|
/*
|
|
* Force 10Base-T, FDX operation
|
|
*/
|
|
#if (DEBUG & 0x2)
|
|
printf ("Forcing 10 Mbps ethernet link... ");
|
|
#endif
|
|
miiphy_read (dev->name, phyAddr, 0x1, &phyStatus);
|
|
|
|
miiphy_write (dev->name, phyAddr, 0x0, 0x0180);
|
|
|
|
timeout = 20;
|
|
do { /* wait for link status to go down */
|
|
udelay (10000);
|
|
if ((timeout--) == 0) {
|
|
#if (DEBUG & 0x2)
|
|
printf ("hmmm, should not have waited...");
|
|
#endif
|
|
break;
|
|
}
|
|
miiphy_read (dev->name, phyAddr, 0x1, &phyStatus);
|
|
#if (DEBUG & 0x2)
|
|
printf ("=");
|
|
#endif
|
|
} while ((phyStatus & 0x0004)); /* !link up */
|
|
|
|
timeout = 1000;
|
|
do { /* wait for link status to come back up */
|
|
udelay (10000);
|
|
if ((timeout--) == 0) {
|
|
printf ("failed. Link is down.\n");
|
|
break;
|
|
}
|
|
miiphy_read (dev->name, phyAddr, 0x1, &phyStatus);
|
|
#if (DEBUG & 0x2)
|
|
printf ("+");
|
|
#endif
|
|
} while (!(phyStatus & 0x0004)); /* !link up */
|
|
|
|
#if (DEBUG & 0x2)
|
|
printf ("done.\n");
|
|
#endif
|
|
} else { /* MII100 */
|
|
/*
|
|
* Set the auto-negotiation advertisement register bits
|
|
*/
|
|
miiphy_write (dev->name, phyAddr, 0x4, 0x01e1);
|
|
|
|
/*
|
|
* Set MDIO bit 0.12 = 1(&& bit 0.9=1?) to enable auto-negotiation
|
|
*/
|
|
miiphy_write (dev->name, phyAddr, 0x0, 0x1200);
|
|
|
|
/*
|
|
* Wait for AN completion
|
|
*/
|
|
timeout = 50000;
|
|
do {
|
|
udelay (1000);
|
|
|
|
if ((timeout--) == 0) {
|
|
#if (DEBUG & 0x2)
|
|
printf ("PHY auto neg 0 failed...\n");
|
|
#endif
|
|
return -1;
|
|
}
|
|
|
|
if (miiphy_read (dev->name, phyAddr, 0x1, &phyStatus) != 0) {
|
|
#if (DEBUG & 0x2)
|
|
printf ("PHY auto neg 1 failed 0x%04x...\n", phyStatus);
|
|
#endif
|
|
return -1;
|
|
}
|
|
} while (!(phyStatus & 0x0004));
|
|
|
|
#if (DEBUG & 0x2)
|
|
printf ("PHY auto neg complete! \n");
|
|
#endif
|
|
}
|
|
}
|
|
|
|
#if (DEBUG & 0x2)
|
|
if (fec->xcv_type != SEVENWIRE)
|
|
mpc512x_fec_phydump (dev->name);
|
|
#endif
|
|
|
|
#if (DEBUG & 0x1)
|
|
printf ("mpc512x_fec_init_phy... Done \n");
|
|
#endif
|
|
return 1;
|
|
}
|
|
|
|
/********************************************************************/
|
|
static void mpc512x_fec_halt (struct eth_device *dev)
|
|
{
|
|
mpc512x_fec_priv *fec = (mpc512x_fec_priv *)dev->priv;
|
|
int counter = 0xffff;
|
|
|
|
#if (DEBUG & 0x2)
|
|
if (fec->xcv_type != SEVENWIRE)
|
|
mpc512x_fec_phydump (dev->name);
|
|
#endif
|
|
|
|
/*
|
|
* mask FEC chip interrupts
|
|
*/
|
|
fec->eth->imask = 0;
|
|
|
|
/*
|
|
* issue graceful stop command to the FEC transmitter if necessary
|
|
*/
|
|
fec->eth->x_cntrl |= 0x00000001;
|
|
|
|
/*
|
|
* wait for graceful stop to register
|
|
*/
|
|
while ((counter--) && (!(fec->eth->ievent & 0x10000000))) ;
|
|
|
|
/*
|
|
* Disable the Ethernet Controller
|
|
*/
|
|
fec->eth->ecntrl &= 0xfffffffd;
|
|
|
|
/*
|
|
* Issue a reset command to the FEC chip
|
|
*/
|
|
fec->eth->ecntrl |= 0x1;
|
|
|
|
/*
|
|
* wait at least 16 clock cycles
|
|
*/
|
|
udelay (10);
|
|
#if (DEBUG & 0x3)
|
|
printf ("Ethernet task stopped\n");
|
|
#endif
|
|
}
|
|
|
|
/********************************************************************/
|
|
|
|
static int mpc512x_fec_send (struct eth_device *dev, volatile void *eth_data,
|
|
int data_length)
|
|
{
|
|
/*
|
|
* This routine transmits one frame. This routine only accepts
|
|
* 6-byte Ethernet addresses.
|
|
*/
|
|
mpc512x_fec_priv *fec = (mpc512x_fec_priv *)dev->priv;
|
|
volatile FEC_TBD *pTbd;
|
|
|
|
#if (DEBUG & 0x20)
|
|
printf("tbd status: 0x%04x\n", fec->tbdBase[fec->tbdIndex].status);
|
|
#endif
|
|
|
|
/*
|
|
* Clear Tx BD ring at first
|
|
*/
|
|
mpc512x_fec_tbd_scrub (fec);
|
|
|
|
/*
|
|
* Check for valid length of data.
|
|
*/
|
|
if ((data_length > 1500) || (data_length <= 0)) {
|
|
return -1;
|
|
}
|
|
|
|
/*
|
|
* Check the number of vacant TxBDs.
|
|
*/
|
|
if (fec->cleanTbdNum < 1) {
|
|
#if (DEBUG & 0x20)
|
|
printf ("No available TxBDs ...\n");
|
|
#endif
|
|
return -1;
|
|
}
|
|
|
|
/*
|
|
* Get the first TxBD to send the mac header
|
|
*/
|
|
pTbd = &fec->bdBase->tbd[fec->tbdIndex];
|
|
pTbd->dataLength = data_length;
|
|
pTbd->dataPointer = (uint32)eth_data;
|
|
pTbd->status |= FEC_TBD_LAST | FEC_TBD_TC | FEC_TBD_READY;
|
|
fec->tbdIndex = (fec->tbdIndex + 1) % FEC_TBD_NUM;
|
|
|
|
/* Activate transmit Buffer Descriptor polling */
|
|
fec->eth->x_des_active = 0x01000000; /* Descriptor polling active */
|
|
|
|
#if (DEBUG & 0x8)
|
|
printf ( "+" );
|
|
#endif
|
|
|
|
fec->cleanTbdNum -= 1;
|
|
|
|
/*
|
|
* wait until frame is sent .
|
|
*/
|
|
while (pTbd->status & FEC_TBD_READY) {
|
|
udelay (10);
|
|
#if (DEBUG & 0x8)
|
|
printf ("TDB status = %04x\n", pTbd->status);
|
|
#endif
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/********************************************************************/
|
|
static int mpc512x_fec_recv (struct eth_device *dev)
|
|
{
|
|
/*
|
|
* This command pulls one frame from the card
|
|
*/
|
|
mpc512x_fec_priv *fec = (mpc512x_fec_priv *)dev->priv;
|
|
volatile FEC_RBD *pRbd = &fec->bdBase->rbd[fec->rbdIndex];
|
|
unsigned long ievent;
|
|
int frame_length = 0;
|
|
|
|
#if (DEBUG & 0x1)
|
|
printf ("mpc512x_fec_recv %d Start...\n", fec->rbdIndex);
|
|
#endif
|
|
#if (DEBUG & 0x8)
|
|
printf( "-" );
|
|
#endif
|
|
|
|
/*
|
|
* Check if any critical events have happened
|
|
*/
|
|
ievent = fec->eth->ievent;
|
|
fec->eth->ievent = ievent;
|
|
if (ievent & 0x20060000) {
|
|
/* BABT, Rx/Tx FIFO errors */
|
|
mpc512x_fec_halt (dev);
|
|
mpc512x_fec_init (dev, NULL);
|
|
return 0;
|
|
}
|
|
if (ievent & 0x80000000) {
|
|
/* Heartbeat error */
|
|
fec->eth->x_cntrl |= 0x00000001;
|
|
}
|
|
if (ievent & 0x10000000) {
|
|
/* Graceful stop complete */
|
|
if (fec->eth->x_cntrl & 0x00000001) {
|
|
mpc512x_fec_halt (dev);
|
|
fec->eth->x_cntrl &= ~0x00000001;
|
|
mpc512x_fec_init (dev, NULL);
|
|
}
|
|
}
|
|
|
|
if (!(pRbd->status & FEC_RBD_EMPTY)) {
|
|
if (!(pRbd->status & FEC_RBD_ERR) &&
|
|
((pRbd->dataLength - 4) > 14)) {
|
|
|
|
/*
|
|
* Get buffer size
|
|
*/
|
|
if (pRbd->status & FEC_RBD_LAST)
|
|
frame_length = pRbd->dataLength - 4;
|
|
else
|
|
frame_length = pRbd->dataLength;
|
|
#if (DEBUG & 0x20)
|
|
{
|
|
int i;
|
|
printf ("recv data length 0x%08x data hdr: ",
|
|
pRbd->dataLength);
|
|
for (i = 0; i < 14; i++)
|
|
printf ("%x ", *((uint8*)pRbd->dataPointer + i));
|
|
printf("\n");
|
|
}
|
|
#endif
|
|
/*
|
|
* Fill the buffer and pass it to upper layers
|
|
*/
|
|
memcpy (&rx_buff[rx_buff_idx], (void*)pRbd->dataPointer,
|
|
frame_length - rx_buff_idx);
|
|
rx_buff_idx = frame_length;
|
|
|
|
if (pRbd->status & FEC_RBD_LAST) {
|
|
NetReceive ((uchar*)rx_buff, frame_length);
|
|
rx_buff_idx = 0;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Reset buffer descriptor as empty
|
|
*/
|
|
mpc512x_fec_rbd_clean (fec, pRbd);
|
|
}
|
|
|
|
/* Try to fill Buffer Descriptors */
|
|
fec->eth->r_des_active = 0x01000000; /* Descriptor polling active */
|
|
return frame_length;
|
|
}
|
|
|
|
/********************************************************************/
|
|
int mpc512x_fec_initialize (bd_t * bis)
|
|
{
|
|
mpc512x_fec_priv *fec;
|
|
struct eth_device *dev;
|
|
int i;
|
|
char *tmp, *end, env_enetaddr[6];
|
|
void * bd;
|
|
|
|
fec = (mpc512x_fec_priv *) malloc (sizeof(*fec));
|
|
dev = (struct eth_device *) malloc (sizeof(*dev));
|
|
memset (dev, 0, sizeof *dev);
|
|
|
|
fec->eth = (ethernet_regs *) MPC512X_FEC;
|
|
|
|
# ifndef CONFIG_FEC_10MBIT
|
|
fec->xcv_type = MII100;
|
|
# else
|
|
fec->xcv_type = MII10;
|
|
# endif
|
|
dev->priv = (void *)fec;
|
|
dev->iobase = MPC512X_FEC;
|
|
dev->init = mpc512x_fec_init;
|
|
dev->halt = mpc512x_fec_halt;
|
|
dev->send = mpc512x_fec_send;
|
|
dev->recv = mpc512x_fec_recv;
|
|
|
|
sprintf (dev->name, "FEC ETHERNET");
|
|
eth_register (dev);
|
|
|
|
#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
|
|
miiphy_register (dev->name,
|
|
fec512x_miiphy_read, fec512x_miiphy_write);
|
|
#endif
|
|
|
|
/* Clean up space FEC's MIB and FIFO RAM ...*/
|
|
memset ((void *) MPC512X_FEC + 0x200, 0x00, 0x400);
|
|
|
|
/*
|
|
* Malloc space for BDs (must be quad word-aligned)
|
|
* this pointer is lost, so cannot be freed
|
|
*/
|
|
bd = malloc (sizeof(mpc512x_buff_descs) + 0x1f);
|
|
fec->bdBase = (mpc512x_buff_descs*)((uint32)bd & 0xfffffff0);
|
|
memset ((void *) bd, 0x00, sizeof(mpc512x_buff_descs) + 0x1f);
|
|
|
|
/*
|
|
* Set interrupt mask register
|
|
*/
|
|
fec->eth->imask = 0x00000000;
|
|
|
|
/*
|
|
* Clear FEC-Lite interrupt event register(IEVENT)
|
|
*/
|
|
fec->eth->ievent = 0xffffffff;
|
|
|
|
/*
|
|
* Try to set the mac address now. The fec mac address is
|
|
* a garbage after reset. When not using fec for booting
|
|
* the Linux fec driver will try to work with this garbage.
|
|
*/
|
|
tmp = getenv ("ethaddr");
|
|
if (tmp) {
|
|
for (i=0; i<6; i++) {
|
|
env_enetaddr[i] = tmp ? simple_strtoul (tmp, &end, 16) : 0;
|
|
if (tmp)
|
|
tmp = (*end) ? end+1 : end;
|
|
}
|
|
mpc512x_fec_set_hwaddr (fec, env_enetaddr);
|
|
fec->eth->gaddr1 = 0x00000000;
|
|
fec->eth->gaddr2 = 0x00000000;
|
|
}
|
|
|
|
mpc512x_fec_init_phy (dev, bis);
|
|
|
|
return 1;
|
|
}
|
|
|
|
/* MII-interface related functions */
|
|
/********************************************************************/
|
|
int fec512x_miiphy_read (char *devname, uint8 phyAddr, uint8 regAddr, uint16 * retVal)
|
|
{
|
|
ethernet_regs *eth = (ethernet_regs *) MPC512X_FEC;
|
|
uint32 reg; /* convenient holder for the PHY register */
|
|
uint32 phy; /* convenient holder for the PHY */
|
|
int timeout = 0xffff;
|
|
|
|
/*
|
|
* reading from any PHY's register is done by properly
|
|
* programming the FEC's MII data register.
|
|
*/
|
|
reg = regAddr << FEC_MII_DATA_RA_SHIFT;
|
|
phy = phyAddr << FEC_MII_DATA_PA_SHIFT;
|
|
|
|
eth->mii_data = (FEC_MII_DATA_ST | FEC_MII_DATA_OP_RD | FEC_MII_DATA_TA | phy | reg);
|
|
|
|
/*
|
|
* wait for the related interrupt
|
|
*/
|
|
while ((timeout--) && (!(eth->ievent & 0x00800000))) ;
|
|
|
|
if (timeout == 0) {
|
|
#if (DEBUG & 0x2)
|
|
printf ("Read MDIO failed...\n");
|
|
#endif
|
|
return -1;
|
|
}
|
|
|
|
/*
|
|
* clear mii interrupt bit
|
|
*/
|
|
eth->ievent = 0x00800000;
|
|
|
|
/*
|
|
* it's now safe to read the PHY's register
|
|
*/
|
|
*retVal = (uint16) eth->mii_data;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/********************************************************************/
|
|
int fec512x_miiphy_write (char *devname, uint8 phyAddr, uint8 regAddr, uint16 data)
|
|
{
|
|
ethernet_regs *eth = (ethernet_regs *) MPC512X_FEC;
|
|
uint32 reg; /* convenient holder for the PHY register */
|
|
uint32 phy; /* convenient holder for the PHY */
|
|
int timeout = 0xffff;
|
|
|
|
reg = regAddr << FEC_MII_DATA_RA_SHIFT;
|
|
phy = phyAddr << FEC_MII_DATA_PA_SHIFT;
|
|
|
|
eth->mii_data = (FEC_MII_DATA_ST | FEC_MII_DATA_OP_WR |
|
|
FEC_MII_DATA_TA | phy | reg | data);
|
|
|
|
/*
|
|
* wait for the MII interrupt
|
|
*/
|
|
while ((timeout--) && (!(eth->ievent & 0x00800000))) ;
|
|
|
|
if (timeout == 0) {
|
|
#if (DEBUG & 0x2)
|
|
printf ("Write MDIO failed...\n");
|
|
#endif
|
|
return -1;
|
|
}
|
|
|
|
/*
|
|
* clear MII interrupt bit
|
|
*/
|
|
eth->ievent = 0x00800000;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if (DEBUG & 0x40)
|
|
static uint32 local_crc32 (char *string, unsigned int crc_value, int len)
|
|
{
|
|
int i;
|
|
char c;
|
|
unsigned int crc, count;
|
|
|
|
/*
|
|
* crc32 algorithm
|
|
*/
|
|
/*
|
|
* crc = 0xffffffff; * The initialized value should be 0xffffffff
|
|
*/
|
|
crc = crc_value;
|
|
|
|
for (i = len; --i >= 0;) {
|
|
c = *string++;
|
|
for (count = 0; count < 8; count++) {
|
|
if ((c & 0x01) ^ (crc & 0x01)) {
|
|
crc >>= 1;
|
|
crc = crc ^ 0xedb88320;
|
|
} else {
|
|
crc >>= 1;
|
|
}
|
|
c >>= 1;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* In big endian system, do byte swaping for crc value
|
|
*/
|
|
/**/ return crc;
|
|
}
|
|
#endif /* DEBUG */
|
|
|
|
#endif /* CONFIG_MPC512x_FEC */
|
|
|