upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
393 lines
11 KiB
393 lines
11 KiB
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) Freescale Semiconductor, Inc. 2006.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <ioports.h>
|
|
#include <mpc83xx.h>
|
|
#include <i2c.h>
|
|
#include <miiphy.h>
|
|
#include <vsc7385.h>
|
|
#ifdef CONFIG_PCI
|
|
#include <asm/mpc8349_pci.h>
|
|
#include <pci.h>
|
|
#endif
|
|
#include <spd_sdram.h>
|
|
#include <asm/mmu.h>
|
|
#if defined(CONFIG_OF_LIBFDT)
|
|
#include <linux/libfdt.h>
|
|
#endif
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#ifndef CONFIG_SPD_EEPROM
|
|
/*************************************************************************
|
|
* fixed sdram init -- doesn't use serial presence detect.
|
|
************************************************************************/
|
|
int fixed_sdram(void)
|
|
{
|
|
volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
|
|
/* The size of RAM, in bytes */
|
|
u32 ddr_size = CONFIG_SYS_DDR_SIZE << 20;
|
|
u32 ddr_size_log2 = __ilog2(ddr_size);
|
|
|
|
im->sysconf.ddrlaw[0].ar =
|
|
LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
|
|
im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000;
|
|
|
|
#if ((CONFIG_SYS_DDR_SDRAM_BASE & 0x00FFFFFF) != 0)
|
|
#warning Chip select bounds is only configurable in 16MB increments
|
|
#endif
|
|
im->ddr.csbnds[0].csbnds =
|
|
((CONFIG_SYS_DDR_SDRAM_BASE >> CSBNDS_SA_SHIFT) & CSBNDS_SA) |
|
|
(((CONFIG_SYS_DDR_SDRAM_BASE + ddr_size - 1) >>
|
|
CSBNDS_EA_SHIFT) & CSBNDS_EA);
|
|
im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG;
|
|
|
|
/* Only one CS for DDR */
|
|
im->ddr.cs_config[1] = 0;
|
|
im->ddr.cs_config[2] = 0;
|
|
im->ddr.cs_config[3] = 0;
|
|
|
|
debug("cs0_bnds = 0x%08x\n", im->ddr.csbnds[0].csbnds);
|
|
debug("cs0_config = 0x%08x\n", im->ddr.cs_config[0]);
|
|
|
|
debug("DDR:bar=0x%08x\n", im->sysconf.ddrlaw[0].bar);
|
|
debug("DDR:ar=0x%08x\n", im->sysconf.ddrlaw[0].ar);
|
|
|
|
im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
|
|
im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;/* Was "2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT" */
|
|
im->ddr.sdram_cfg = SDRAM_CFG_SREN | SDRAM_CFG_SDRAM_TYPE_DDR1;
|
|
im->ddr.sdram_mode =
|
|
(0x0000 << SDRAM_MODE_ESD_SHIFT) | (0x0032 << SDRAM_MODE_SD_SHIFT);
|
|
im->ddr.sdram_interval =
|
|
(0x0410 << SDRAM_INTERVAL_REFINT_SHIFT) | (0x0100 <<
|
|
SDRAM_INTERVAL_BSTOPRE_SHIFT);
|
|
im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_SDRAM_CLK_CNTL;
|
|
|
|
udelay(200);
|
|
|
|
im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
|
|
|
|
debug("DDR:timing_cfg_1=0x%08x\n", im->ddr.timing_cfg_1);
|
|
debug("DDR:timing_cfg_2=0x%08x\n", im->ddr.timing_cfg_2);
|
|
debug("DDR:sdram_mode=0x%08x\n", im->ddr.sdram_mode);
|
|
debug("DDR:sdram_interval=0x%08x\n", im->ddr.sdram_interval);
|
|
debug("DDR:sdram_cfg=0x%08x\n", im->ddr.sdram_cfg);
|
|
|
|
return CONFIG_SYS_DDR_SIZE;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_PCI
|
|
/*
|
|
* Initialize PCI Devices, report devices found
|
|
*/
|
|
#ifndef CONFIG_PCI_PNP
|
|
static struct pci_config_table pci_mpc83xxmitx_config_table[] = {
|
|
{
|
|
PCI_ANY_ID,
|
|
PCI_ANY_ID,
|
|
PCI_ANY_ID,
|
|
PCI_ANY_ID,
|
|
0x0f,
|
|
PCI_ANY_ID,
|
|
pci_cfgfunc_config_device,
|
|
{
|
|
PCI_ENET0_IOADDR,
|
|
PCI_ENET0_MEMADDR,
|
|
PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER}
|
|
},
|
|
{}
|
|
}
|
|
#endif
|
|
|
|
volatile static struct pci_controller hose[] = {
|
|
{
|
|
#ifndef CONFIG_PCI_PNP
|
|
config_table:pci_mpc83xxmitx_config_table,
|
|
#endif
|
|
},
|
|
{
|
|
#ifndef CONFIG_PCI_PNP
|
|
config_table:pci_mpc83xxmitx_config_table,
|
|
#endif
|
|
}
|
|
};
|
|
#endif /* CONFIG_PCI */
|
|
|
|
int dram_init(void)
|
|
{
|
|
volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
|
|
u32 msize = 0;
|
|
#ifdef CONFIG_DDR_ECC
|
|
volatile ddr83xx_t *ddr = &im->ddr;
|
|
#endif
|
|
|
|
if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im)
|
|
return -ENXIO;
|
|
|
|
/* DDR SDRAM - Main SODIMM */
|
|
im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR;
|
|
#ifdef CONFIG_SPD_EEPROM
|
|
msize = spd_sdram();
|
|
#else
|
|
msize = fixed_sdram();
|
|
#endif
|
|
|
|
#ifdef CONFIG_DDR_ECC
|
|
if (ddr->sdram_cfg & SDRAM_CFG_ECC_EN)
|
|
/* Unlike every other board, on the 83xx spd_sdram() returns
|
|
megabytes instead of just bytes. That's why we need to
|
|
multiple by 1MB when calling ddr_enable_ecc(). */
|
|
ddr_enable_ecc(msize * 1048576);
|
|
#endif
|
|
|
|
/* return total bus RAM size(bytes) */
|
|
gd->ram_size = msize * 1024 * 1024;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int checkboard(void)
|
|
{
|
|
#ifdef CONFIG_MPC8349ITX
|
|
puts("Board: Freescale MPC8349E-mITX\n");
|
|
#else
|
|
puts("Board: Freescale MPC8349E-mITX-GP\n");
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Implement a work-around for a hardware problem with compact
|
|
* flash.
|
|
*
|
|
* Program the UPM if compact flash is enabled.
|
|
*/
|
|
int misc_init_f(void)
|
|
{
|
|
#ifdef CONFIG_VSC7385_ENET
|
|
volatile u32 *vsc7385_cpuctrl;
|
|
|
|
/* 0x1c0c0 is the VSC7385 CPU Control (CPUCTRL) Register. The power up
|
|
default of VSC7385 L1_IRQ and L2_IRQ requests are active high. That
|
|
means it is 0 when the IRQ is not active. This makes the wire-AND
|
|
logic always assert IRQ7 to CPU even if there is no request from the
|
|
switch. Since the compact flash and the switch share the same IRQ,
|
|
the Linux kernel will think that the compact flash is requesting irq
|
|
and get stuck when it tries to clear the IRQ. Thus we need to set
|
|
the L2_IRQ0 and L2_IRQ1 to active low.
|
|
|
|
The following code sets the L1_IRQ and L2_IRQ polarity to active low.
|
|
Without this code, compact flash will not work in Linux because
|
|
unlike U-Boot, Linux uses the IRQ, so this code is necessary if we
|
|
don't enable compact flash for U-Boot.
|
|
*/
|
|
|
|
vsc7385_cpuctrl = (volatile u32 *)(CONFIG_SYS_VSC7385_BASE + 0x1c0c0);
|
|
*vsc7385_cpuctrl |= 0x0c;
|
|
#endif
|
|
|
|
#ifdef CONFIG_COMPACT_FLASH
|
|
/* UPM Table Configuration Code */
|
|
static uint UPMATable[] = {
|
|
0xcffffc00, 0x0fffff00, 0x0fafff00, 0x0fafff00,
|
|
0x0faffd00, 0x0faffc04, 0x0ffffc00, 0x3ffffc01,
|
|
0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfff7fc00,
|
|
0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
|
|
0xcffffc00, 0x0fffff00, 0x0ff3ff00, 0x0ff3ff00,
|
|
0x0ff3fe00, 0x0ffffc00, 0x3ffffc05, 0xfffffc00,
|
|
0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
|
|
0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
|
|
0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
|
|
0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01
|
|
};
|
|
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
|
|
|
|
set_lbc_br(3, CONFIG_SYS_BR3_PRELIM);
|
|
set_lbc_or(3, CONFIG_SYS_OR3_PRELIM);
|
|
|
|
/* Program the MAMR. RFEN=0, OP=00, UWPL=1, AM=000, DS=01, G0CL=000,
|
|
GPL4=0, RLF=0001, WLF=0001, TLF=0001, MAD=000000
|
|
*/
|
|
immap->im_lbc.mamr = 0x08404440;
|
|
|
|
upmconfig(0, UPMATable, sizeof(UPMATable) / sizeof(UPMATable[0]));
|
|
|
|
puts("UPMA: Configured for compact flash\n");
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Miscellaneous late-boot configurations
|
|
*
|
|
* Make sure the EEPROM has the HRCW correctly programmed.
|
|
* Make sure the RTC is correctly programmed.
|
|
*
|
|
* The MPC8349E-mITX can be configured to load the HRCW from
|
|
* EEPROM instead of flash. This is controlled via jumpers
|
|
* LGPL0, 1, and 3. Normally, these jumpers are set to 000 (all
|
|
* jumpered), but if they're set to 001 or 010, then the HRCW is
|
|
* read from the "I2C EEPROM".
|
|
*
|
|
* This function makes sure that the I2C EEPROM is programmed
|
|
* correctly.
|
|
*
|
|
* If a VSC7385 microcode image is present, then upload it.
|
|
*/
|
|
int misc_init_r(void)
|
|
{
|
|
int rc = 0;
|
|
|
|
#if defined(CONFIG_SYS_I2C)
|
|
unsigned int orig_bus = i2c_get_bus_num();
|
|
u8 i2c_data;
|
|
|
|
#ifdef CONFIG_SYS_I2C_RTC_ADDR
|
|
u8 ds1339_data[17];
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_I2C_EEPROM_ADDR
|
|
static u8 eeprom_data[] = /* HRCW data */
|
|
{
|
|
0xAA, 0x55, 0xAA, /* Preamble */
|
|
0x7C, /* ACS=0, BYTE_EN=1111, CONT=1 */
|
|
0x02, 0x40, /* RCWL ADDR=0x0_0900 */
|
|
(CONFIG_SYS_HRCW_LOW >> 24) & 0xFF,
|
|
(CONFIG_SYS_HRCW_LOW >> 16) & 0xFF,
|
|
(CONFIG_SYS_HRCW_LOW >> 8) & 0xFF,
|
|
CONFIG_SYS_HRCW_LOW & 0xFF,
|
|
0x7C, /* ACS=0, BYTE_EN=1111, CONT=1 */
|
|
0x02, 0x41, /* RCWH ADDR=0x0_0904 */
|
|
(CONFIG_SYS_HRCW_HIGH >> 24) & 0xFF,
|
|
(CONFIG_SYS_HRCW_HIGH >> 16) & 0xFF,
|
|
(CONFIG_SYS_HRCW_HIGH >> 8) & 0xFF,
|
|
CONFIG_SYS_HRCW_HIGH & 0xFF
|
|
};
|
|
|
|
u8 data[sizeof(eeprom_data)];
|
|
#endif
|
|
|
|
printf("Board revision: ");
|
|
i2c_set_bus_num(1);
|
|
if (i2c_read(CONFIG_SYS_I2C_8574A_ADDR2, 0, 0, &i2c_data, sizeof(i2c_data)) == 0)
|
|
printf("%u.%u (PCF8475A)\n", (i2c_data & 0x02) >> 1, i2c_data & 0x01);
|
|
else if (i2c_read(CONFIG_SYS_I2C_8574_ADDR2, 0, 0, &i2c_data, sizeof(i2c_data)) == 0)
|
|
printf("%u.%u (PCF8475)\n", (i2c_data & 0x02) >> 1, i2c_data & 0x01);
|
|
else {
|
|
printf("Unknown\n");
|
|
rc = 1;
|
|
}
|
|
|
|
#ifdef CONFIG_SYS_I2C_EEPROM_ADDR
|
|
i2c_set_bus_num(0);
|
|
|
|
if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 2, data, sizeof(data)) == 0) {
|
|
if (memcmp(data, eeprom_data, sizeof(data)) != 0) {
|
|
if (i2c_write
|
|
(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 2, eeprom_data,
|
|
sizeof(eeprom_data)) != 0) {
|
|
puts("Failure writing the HRCW to EEPROM via I2C.\n");
|
|
rc = 1;
|
|
}
|
|
}
|
|
} else {
|
|
puts("Failure reading the HRCW from EEPROM via I2C.\n");
|
|
rc = 1;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_I2C_RTC_ADDR
|
|
i2c_set_bus_num(1);
|
|
|
|
if (i2c_read(CONFIG_SYS_I2C_RTC_ADDR, 0, 1, ds1339_data, sizeof(ds1339_data))
|
|
== 0) {
|
|
|
|
/* Work-around for MPC8349E-mITX bug #13601.
|
|
If the RTC does not contain valid register values, the DS1339
|
|
Linux driver will not work.
|
|
*/
|
|
|
|
/* Make sure status register bits 6-2 are zero */
|
|
ds1339_data[0x0f] &= ~0x7c;
|
|
|
|
/* Check for a valid day register value */
|
|
ds1339_data[0x03] &= ~0xf8;
|
|
if (ds1339_data[0x03] == 0) {
|
|
ds1339_data[0x03] = 1;
|
|
}
|
|
|
|
/* Check for a valid date register value */
|
|
ds1339_data[0x04] &= ~0xc0;
|
|
if ((ds1339_data[0x04] == 0) ||
|
|
((ds1339_data[0x04] & 0x0f) > 9) ||
|
|
(ds1339_data[0x04] >= 0x32)) {
|
|
ds1339_data[0x04] = 1;
|
|
}
|
|
|
|
/* Check for a valid month register value */
|
|
ds1339_data[0x05] &= ~0x60;
|
|
|
|
if ((ds1339_data[0x05] == 0) ||
|
|
((ds1339_data[0x05] & 0x0f) > 9) ||
|
|
((ds1339_data[0x05] >= 0x13)
|
|
&& (ds1339_data[0x05] <= 0x19))) {
|
|
ds1339_data[0x05] = 1;
|
|
}
|
|
|
|
/* Enable Oscillator and rate select */
|
|
ds1339_data[0x0e] = 0x1c;
|
|
|
|
/* Work-around for MPC8349E-mITX bug #13330.
|
|
Ensure that the RTC control register contains the value 0x1c.
|
|
This affects SATA performance.
|
|
*/
|
|
|
|
if (i2c_write
|
|
(CONFIG_SYS_I2C_RTC_ADDR, 0, 1, ds1339_data,
|
|
sizeof(ds1339_data))) {
|
|
puts("Failure writing to the RTC via I2C.\n");
|
|
rc = 1;
|
|
}
|
|
} else {
|
|
puts("Failure reading from the RTC via I2C.\n");
|
|
rc = 1;
|
|
}
|
|
#endif
|
|
|
|
i2c_set_bus_num(orig_bus);
|
|
#endif
|
|
|
|
#ifdef CONFIG_VSC7385_IMAGE
|
|
if (vsc7385_upload_firmware((void *) CONFIG_VSC7385_IMAGE,
|
|
CONFIG_VSC7385_IMAGE_SIZE)) {
|
|
puts("Failure uploading VSC7385 microcode.\n");
|
|
rc = 1;
|
|
}
|
|
#endif
|
|
|
|
return rc;
|
|
}
|
|
|
|
#if defined(CONFIG_OF_BOARD_SETUP)
|
|
int ft_board_setup(void *blob, bd_t *bd)
|
|
{
|
|
ft_cpu_setup(blob, bd);
|
|
#ifdef CONFIG_PCI
|
|
ft_pci_setup(blob, bd);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|