upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
312 lines
8.6 KiB
312 lines
8.6 KiB
/*
|
|
* Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
|
|
* on behalf of DENX Software Engineering GmbH
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
#ifndef __M28_H__
|
|
#define __M28_H__
|
|
|
|
#include <asm/arch/regs-base.h>
|
|
|
|
/*
|
|
* SoC configurations
|
|
*/
|
|
#define CONFIG_MX28 /* i.MX28 SoC */
|
|
#define CONFIG_MXS_GPIO /* GPIO control */
|
|
#define CONFIG_SYS_HZ 1000 /* Ticks per second */
|
|
|
|
/*
|
|
* Define M28EVK machine type by hand until it lands in mach-types
|
|
*/
|
|
#define MACH_TYPE_M28EVK 3613
|
|
|
|
#define CONFIG_MACH_TYPE MACH_TYPE_M28EVK
|
|
|
|
#define CONFIG_SYS_NO_FLASH
|
|
#define CONFIG_SYS_ICACHE_OFF
|
|
#define CONFIG_SYS_DCACHE_OFF
|
|
#define CONFIG_BOARD_EARLY_INIT_F
|
|
#define CONFIG_ARCH_CPU_INIT
|
|
#define CONFIG_ARCH_MISC_INIT
|
|
|
|
/*
|
|
* SPL
|
|
*/
|
|
#define CONFIG_SPL
|
|
#define CONFIG_SPL_NO_CPU_SUPPORT_CODE
|
|
#define CONFIG_SPL_START_S_PATH "arch/arm/cpu/arm926ejs/mx28"
|
|
#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/arm926ejs/mx28/u-boot-spl.lds"
|
|
#define CONFIG_SPL_LIBCOMMON_SUPPORT
|
|
#define CONFIG_SPL_LIBGENERIC_SUPPORT
|
|
|
|
/*
|
|
* U-Boot Commands
|
|
*/
|
|
#include <config_cmd_default.h>
|
|
#define CONFIG_DISPLAY_CPUINFO
|
|
#define CONFIG_DOS_PARTITION
|
|
|
|
#define CONFIG_CMD_CACHE
|
|
#define CONFIG_CMD_DATE
|
|
#define CONFIG_CMD_DHCP
|
|
#define CONFIG_CMD_EEPROM
|
|
#define CONFIG_CMD_EXT2
|
|
#define CONFIG_CMD_FAT
|
|
#define CONFIG_CMD_GPIO
|
|
#define CONFIG_CMD_I2C
|
|
#define CONFIG_CMD_MII
|
|
#define CONFIG_CMD_MMC
|
|
#define CONFIG_CMD_NAND
|
|
#define CONFIG_CMD_NET
|
|
#define CONFIG_CMD_NFS
|
|
#define CONFIG_CMD_PING
|
|
#define CONFIG_CMD_SETEXPR
|
|
#define CONFIG_CMD_SF
|
|
#define CONFIG_CMD_SPI
|
|
#define CONFIG_CMD_USB
|
|
|
|
/*
|
|
* Memory configurations
|
|
*/
|
|
#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */
|
|
#define PHYS_SDRAM_1 0x40000000 /* Base address */
|
|
#define PHYS_SDRAM_1_SIZE 0x40000000 /* Max 1 GB RAM */
|
|
#define CONFIG_STACKSIZE 0x00010000 /* 128 KB stack */
|
|
#define CONFIG_SYS_MALLOC_LEN 0x00400000 /* 4 MB for malloc */
|
|
#define CONFIG_SYS_GBL_DATA_SIZE 128 /* Initial data */
|
|
#define CONFIG_SYS_MEMTEST_START 0x40000000 /* Memtest start adr */
|
|
#define CONFIG_SYS_MEMTEST_END 0x40400000 /* 4 MB RAM test */
|
|
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
|
|
/* Point initial SP in SRAM so SPL can use it too. */
|
|
|
|
#define CONFIG_SYS_INIT_RAM_ADDR 0x00002000
|
|
#define CONFIG_SYS_INIT_RAM_SIZE (128 * 1024)
|
|
|
|
#define CONFIG_SYS_INIT_SP_OFFSET \
|
|
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_ADDR \
|
|
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
|
|
/*
|
|
* We need to sacrifice first 4 bytes of RAM here to avoid triggering some
|
|
* strange BUG in ROM corrupting first 4 bytes of RAM when loading U-Boot
|
|
* binary. In case there was more of this mess, 0x100 bytes are skipped.
|
|
*/
|
|
#define CONFIG_SYS_TEXT_BASE 0x40000100
|
|
|
|
/*
|
|
* U-Boot general configurations
|
|
*/
|
|
#define CONFIG_SYS_LONGHELP
|
|
#define CONFIG_SYS_PROMPT "=> "
|
|
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */
|
|
#define CONFIG_SYS_PBSIZE \
|
|
(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
|
|
/* Print buffer size */
|
|
#define CONFIG_SYS_MAXARGS 32 /* Max number of command args */
|
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
|
|
/* Boot argument buffer size */
|
|
#define CONFIG_VERSION_VARIABLE /* U-BOOT version */
|
|
#define CONFIG_AUTO_COMPLETE /* Command auto complete */
|
|
#define CONFIG_CMDLINE_EDITING /* Command history etc */
|
|
#define CONFIG_SYS_HUSH_PARSER
|
|
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
|
|
|
|
/*
|
|
* Serial Driver
|
|
*/
|
|
#define CONFIG_PL011_SERIAL
|
|
#define CONFIG_PL011_CLOCK 24000000
|
|
#define CONFIG_PL01x_PORTS { (void *)MXS_UARTDBG_BASE }
|
|
#define CONFIG_CONS_INDEX 0
|
|
#define CONFIG_BAUDRATE 115200 /* Default baud rate */
|
|
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
|
|
|
|
/*
|
|
* MMC Driver
|
|
*/
|
|
#ifdef CONFIG_CMD_MMC
|
|
#define CONFIG_MMC
|
|
#define CONFIG_GENERIC_MMC
|
|
#define CONFIG_MXS_MMC
|
|
#endif
|
|
|
|
/*
|
|
* NAND
|
|
*/
|
|
#define CONFIG_ENV_SIZE (16 * 1024)
|
|
#ifdef CONFIG_CMD_NAND
|
|
#define CONFIG_NAND_MXS
|
|
#define CONFIG_APBH_DMA
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
#define CONFIG_SYS_NAND_BASE 0x60000000
|
|
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
|
|
|
|
/* Environment is in NAND */
|
|
#define CONFIG_ENV_IS_IN_NAND
|
|
#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
|
|
#define CONFIG_ENV_SECT_SIZE (128 * 1024)
|
|
#define CONFIG_ENV_RANGE (512 * 1024)
|
|
#define CONFIG_ENV_OFFSET 0x300000
|
|
#define CONFIG_ENV_OFFSET_REDUND \
|
|
(CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)
|
|
|
|
#define CONFIG_CMD_UBI
|
|
#define CONFIG_CMD_UBIFS
|
|
#define CONFIG_CMD_MTDPARTS
|
|
#define CONFIG_RBTREE
|
|
#define CONFIG_LZO
|
|
#define CONFIG_MTD_DEVICE
|
|
#define CONFIG_MTD_PARTITIONS
|
|
#define MTDIDS_DEFAULT "nand0=gpmi-nand.0"
|
|
#define MTDPARTS_DEFAULT \
|
|
"mtdparts=gpmi-nand.0:" \
|
|
"3m(bootloader)ro," \
|
|
"512k(environment)," \
|
|
"512k(redundant-environment)," \
|
|
"4m(kernel)," \
|
|
"-(filesystem)"
|
|
#else
|
|
#define CONFIG_ENV_IS_NOWHERE
|
|
#endif
|
|
|
|
/*
|
|
* Ethernet on SOC (FEC)
|
|
*/
|
|
#ifdef CONFIG_CMD_NET
|
|
#define CONFIG_ETHPRIME "FEC0"
|
|
#define CONFIG_FEC_MXC
|
|
#define CONFIG_FEC_MXC_MULTI
|
|
#define CONFIG_MII
|
|
#define CONFIG_DISCOVER_PHY
|
|
#define CONFIG_FEC_XCV_TYPE RMII
|
|
#endif
|
|
|
|
/*
|
|
* I2C
|
|
*/
|
|
#ifdef CONFIG_CMD_I2C
|
|
#define CONFIG_I2C_MXS
|
|
#define CONFIG_HARD_I2C
|
|
#define CONFIG_SYS_I2C_SPEED 400000
|
|
#endif
|
|
|
|
/*
|
|
* EEPROM
|
|
*/
|
|
#ifdef CONFIG_CMD_EEPROM
|
|
#define CONFIG_SYS_I2C_MULTI_EEPROMS
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
|
|
#endif
|
|
|
|
/*
|
|
* RTC
|
|
*/
|
|
#ifdef CONFIG_CMD_DATE
|
|
/* Use the internal RTC in the MXS chip */
|
|
#define CONFIG_RTC_INTERNAL
|
|
#ifdef CONFIG_RTC_INTERNAL
|
|
#define CONFIG_RTC_MXS
|
|
#else
|
|
#define CONFIG_RTC_M41T62
|
|
#define CONFIG_SYS_I2C_RTC_ADDR 0x68
|
|
#define CONFIG_SYS_M41T11_BASE_YEAR 2000
|
|
#endif
|
|
#endif
|
|
|
|
/*
|
|
* USB
|
|
*/
|
|
#ifdef CONFIG_CMD_USB
|
|
#define CONFIG_USB_EHCI
|
|
#define CONFIG_USB_EHCI_MXS
|
|
#define CONFIG_EHCI_MXS_PORT 1
|
|
#define CONFIG_EHCI_IS_TDI
|
|
#define CONFIG_USB_STORAGE
|
|
#endif
|
|
|
|
/*
|
|
* SPI
|
|
*/
|
|
#ifdef CONFIG_CMD_SPI
|
|
#define CONFIG_HARD_SPI
|
|
#define CONFIG_MXS_SPI
|
|
#define CONFIG_SPI_HALF_DUPLEX
|
|
#define CONFIG_DEFAULT_SPI_BUS 2
|
|
#define CONFIG_DEFAULT_SPI_MODE SPI_MODE_0
|
|
|
|
/* SPI FLASH */
|
|
#ifdef CONFIG_CMD_SF
|
|
#define CONFIG_SPI_FLASH
|
|
#define CONFIG_SPI_FLASH_STMICRO
|
|
#define CONFIG_SPI_FLASH_CS 2
|
|
#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
|
|
#define CONFIG_SF_DEFAULT_SPEED 24000000
|
|
|
|
#define CONFIG_ENV_SPI_CS 0
|
|
#define CONFIG_ENV_SPI_BUS 2
|
|
#define CONFIG_ENV_SPI_MAX_HZ 24000000
|
|
#define CONFIG_ENV_SPI_MODE SPI_MODE_0
|
|
#endif
|
|
#endif
|
|
|
|
/*
|
|
* Boot Linux
|
|
*/
|
|
#define CONFIG_CMDLINE_TAG
|
|
#define CONFIG_SETUP_MEMORY_TAGS
|
|
#define CONFIG_BOOTDELAY 3
|
|
#define CONFIG_BOOTFILE "uImage"
|
|
#define CONFIG_BOOTARGS "console=ttyAM0,115200n8 "
|
|
#define CONFIG_BOOTCOMMAND "run bootcmd_net"
|
|
#define CONFIG_LOADADDR 0x42000000
|
|
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
|
|
|
|
/*
|
|
* Extra Environments
|
|
*/
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"update_nand_full_filename=u-boot.nand\0" \
|
|
"update_nand_firmware_filename=u-boot.sb\0" \
|
|
"update_nand_firmware_maxsz=0x100000\0" \
|
|
"update_nand_stride=0x40\0" /* MX28 datasheet ch. 12.12 */ \
|
|
"update_nand_count=0x4\0" /* MX28 datasheet ch. 12.12 */ \
|
|
"update_nand_get_fcb_size=" /* Get size of FCB blocks */ \
|
|
"nand device 0 ; " \
|
|
"nand info ; " \
|
|
"setexpr fcb_sz ${update_nand_stride} * ${update_nand_count};" \
|
|
"setexpr update_nand_fcb ${fcb_sz} * ${nand_writesize}\0" \
|
|
"update_nand_full=" /* Update FCB, DBBT and FW */ \
|
|
"if tftp ${update_nand_full_filename} ; then " \
|
|
"run update_nand_get_fcb_size ; " \
|
|
"nand scrub -y 0x0 ${filesize} ; " \
|
|
"nand write.raw ${loadaddr} 0x0 ${update_nand_fcb} ; " \
|
|
"setexpr update_off ${loadaddr} + ${update_nand_fcb} ; " \
|
|
"setexpr update_sz ${filesize} - ${update_nand_fcb} ; " \
|
|
"nand write ${update_off} ${update_nand_fcb} ${update_sz} ; " \
|
|
"fi\0" \
|
|
"update_nand_firmware=" /* Update only firmware */ \
|
|
"if tftp ${update_nand_firmware_filename} ; then " \
|
|
"run update_nand_get_fcb_size ; " \
|
|
"setexpr fcb_sz ${update_nand_fcb} * 2 ; " /* FCB + DBBT */ \
|
|
"setexpr fw_sz ${update_nand_firmware_maxsz} * 2 ; " \
|
|
"setexpr fw_off ${fcb_sz} + ${update_nand_firmware_maxsz};" \
|
|
"nand erase ${fcb_sz} ${fw_sz} ; " \
|
|
"nand write ${loadaddr} ${fcb_sz} ${filesize} ; " \
|
|
"nand write ${loadaddr} ${fw_off} ${filesize} ; " \
|
|
"fi\0"
|
|
|
|
#endif /* __M28_H__ */
|
|
|