upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
165 lines
3.8 KiB
165 lines
3.8 KiB
/*
|
|
* Copyright (C) 2011 Simon Guinot <sguinot@lacie.com>
|
|
*
|
|
* Based on Kirkwood support:
|
|
* (C) Copyright 2009
|
|
* Marvell Semiconductor <www.marvell.com>
|
|
* Written-by: Prafulla Wadaskar <prafulla@marvell.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <asm/arch/cpu.h>
|
|
#include <asm/arch/soc.h>
|
|
#include <asm/arch/mpp.h>
|
|
#include <asm/arch/gpio.h>
|
|
|
|
#include "../common/common.h"
|
|
#include "netdev.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/* GPIO configuration: start FAN at low speed, USB and HDD */
|
|
|
|
#define WIRELESS_SPACE_OE_LOW 0xFF006808
|
|
#define WIRELESS_SPACE_OE_HIGH 0x0000F989
|
|
#define WIRELESS_SPACE_OE_VAL_LOW 0x00010080
|
|
#define WIRELESS_SPACE_OE_VAL_HIGH 0x00000240
|
|
|
|
#define WIRELESS_SPACE_REAR_BUTTON 13
|
|
#define WIRELESS_SPACE_FRONT_BUTTON 43
|
|
|
|
const u32 kwmpp_config[] = {
|
|
MPP0_NF_IO2,
|
|
MPP1_NF_IO3,
|
|
MPP2_NF_IO4,
|
|
MPP3_NF_IO5,
|
|
MPP4_NF_IO6,
|
|
MPP5_NF_IO7,
|
|
MPP6_SYSRST_OUTn,
|
|
MPP7_GPO, /* Fan speed (bit 1) */
|
|
MPP8_TW_SDA,
|
|
MPP9_TW_SCK,
|
|
MPP10_UART0_TXD,
|
|
MPP11_UART0_RXD,
|
|
MPP13_GPIO, /* Red led */
|
|
MPP14_GPIO, /* USB fuse */
|
|
MPP15_SATA0_ACTn,
|
|
MPP16_GPIO, /* SATA 0 power */
|
|
MPP17_GPIO, /* SATA 1 power */
|
|
MPP18_NF_IO0,
|
|
MPP19_NF_IO1,
|
|
MPP20_GE1_0, /* Gigabit Ethernet 1 */
|
|
MPP21_GE1_1,
|
|
MPP22_GE1_2,
|
|
MPP23_GE1_3,
|
|
MPP24_GE1_4,
|
|
MPP25_GE1_5,
|
|
MPP26_GE1_6,
|
|
MPP27_GE1_7,
|
|
MPP28_GE1_8,
|
|
MPP29_GE1_9,
|
|
MPP30_GE1_10,
|
|
MPP31_GE1_11,
|
|
MPP32_GE1_12,
|
|
MPP33_GE1_13,
|
|
MPP34_GE1_14,
|
|
MPP35_GE1_15,
|
|
MPP36_GPIO, /* Fan speed (bit 2) */
|
|
MPP37_GPIO, /* Fan speed (bit 0) */
|
|
MPP38_GPIO, /* Fan power */
|
|
MPP39_GPIO, /* Fan rotation fail */
|
|
MPP40_GPIO, /* Ethernet switch link */
|
|
MPP41_GPIO, /* USB enable host vbus */
|
|
MPP42_GPIO, /* LED clock control */
|
|
MPP43_GPIO, /* WPS button (0=Pushed, 1=Released) */
|
|
MPP44_GPIO, /* Red LED on/off */
|
|
MPP45_GPIO, /* Red LED timer blink (on=off=100ms) */
|
|
MPP46_GPIO, /* Green LED on/off */
|
|
MPP47_GPIO, /* LED (blue, green) SATA activity blink */
|
|
MPP48_GPIO, /* Blue LED on/off */
|
|
0
|
|
};
|
|
|
|
struct mv88e61xx_config swcfg = {
|
|
.name = "egiga0",
|
|
.vlancfg = MV88E61XX_VLANCFG_ROUTER,
|
|
.rgmii_delay = MV88E61XX_RGMII_DELAY_EN,
|
|
.led_init = MV88E61XX_LED_INIT_EN,
|
|
.mdip = MV88E61XX_MDIP_NOCHANGE,
|
|
.portstate = MV88E61XX_PORTSTT_FORWARDING,
|
|
.cpuport = 0x20,
|
|
.ports_enabled = 0x3F,
|
|
};
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
/* Gpio configuration */
|
|
mvebu_config_gpio(WIRELESS_SPACE_OE_VAL_LOW, WIRELESS_SPACE_OE_VAL_HIGH,
|
|
WIRELESS_SPACE_OE_LOW, WIRELESS_SPACE_OE_HIGH);
|
|
|
|
/* Multi-Purpose Pins Functionality configuration */
|
|
kirkwood_mpp_conf(kwmpp_config, NULL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_init(void)
|
|
{
|
|
/* Machine number */
|
|
gd->bd->bi_arch_number = CONFIG_MACH_TYPE;
|
|
|
|
/* Boot parameters address */
|
|
gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if defined(CONFIG_MISC_INIT_R)
|
|
int misc_init_r(void)
|
|
{
|
|
#if defined(CONFIG_CMD_I2C) && defined(CONFIG_SYS_I2C_EEPROM_ADDR)
|
|
if (!getenv("ethaddr")) {
|
|
uchar mac[6];
|
|
if (lacie_read_mac_address(mac) == 0)
|
|
eth_setenv_enetaddr("ethaddr", mac);
|
|
}
|
|
#endif
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_CMD_NET) && defined(CONFIG_RESET_PHY_R)
|
|
/* Configure and initialize PHY */
|
|
void reset_phy(void)
|
|
{
|
|
/* configure switch on egiga0 */
|
|
mv88e61xx_switch_initialize(&swcfg);
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_KIRKWOOD_GPIO) && defined(CONFIG_WIRELESS_SPACE_CMD)
|
|
/* Return GPIO button status */
|
|
static int
|
|
do_ws(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
if (strcmp(argv[1], "button") == 0) {
|
|
if (strcmp(argv[2], "rear") == 0)
|
|
/* invert GPIO result for intuitive while/until use */
|
|
return !kw_gpio_get_value(WIRELESS_SPACE_REAR_BUTTON);
|
|
else if (strcmp(argv[2], "front") == 0)
|
|
return kw_gpio_get_value(WIRELESS_SPACE_FRONT_BUTTON);
|
|
else
|
|
return -1;
|
|
} else {
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
U_BOOT_CMD(ws, 3, 0, do_ws,
|
|
"Return GPIO button status 0=off 1=on",
|
|
"- ws button rear|front: test buttons' states\n"
|
|
);
|
|
#endif
|
|
|