|
|
======================================================================
|
|
|
Changes for U-Boot 1.0.2:
|
|
|
======================================================================
|
|
|
|
|
|
* Patches by Travis Sawyer, 12 Mar 2004:
|
|
|
- Fix Gigabit Ethernet support for 440GX
|
|
|
- Add Gigabit Ethernet Support to MII PHY utilities
|
|
|
|
|
|
* Patch by Brad Kemp, 12 Mar 2004:
|
|
|
Fixes for drivers/cfi_flash.c:
|
|
|
- Better support for x8/x16 implementations
|
|
|
- Added failure for AMD chips attempting to use CFG_FLASH_USE_BUFFER_WRITE
|
|
|
- Added defines for AMD command and address constants
|
|
|
|
|
|
* Patch by Leon Kukovec, 12 Mar 2004:
|
|
|
Fix get_dentfromdir() to correctly handle deleted dentries
|
|
|
|
|
|
* Patch by George G. Davis, 11 Mar 2004:
|
|
|
Remove hard coded network settings in TI OMAP1610 H2
|
|
|
default board config
|
|
|
|
|
|
* Patch by George G. Davis, 11 Mar 2004:
|
|
|
add support for ADS GraphicsClient+ board.
|
|
|
|
|
|
* Patch by Pierre Aubert, 11 Mar 2004:
|
|
|
- add bitmap command and splash screen support in cfb console
|
|
|
- add [optional] origin in the bitmap display command
|
|
|
|
|
|
* Patch by Travis Sawyer, 11 Mar 2004:
|
|
|
Fix ocotea board early init interrupt setup.
|
|
|
|
|
|
* Patch by Thomas Viehweger, 11 Mar 2004:
|
|
|
Remove redundand code; add PCI-specific bits to include/mpc8260.h
|
|
|
|
|
|
* Patch by Stephan Linz, 09 Mar 2004
|
|
|
- Add support for the SSV ADNP/ESC1 (Nios Softcore)
|
|
|
|
|
|
* Patch by George G. Davis, 9 Mar 2004:
|
|
|
fix recent build failure for SA1100 target
|
|
|
|
|
|
* Patch by Travis Sawyer, 09 Mar 2004:
|
|
|
Support native interrupt mode for the IBM440GX.
|
|
|
Previously it was running in 440GP compatibility mode.
|
|
|
|
|
|
* Patch by Philippe Robin, 09 Mar 2004:
|
|
|
Added ARM Integrator AP, CP and Versatile PB926EJ-S Reference
|
|
|
Platform support.
|
|
|
|
|
|
* Patch by Masami Komiya, 08 Mar 2004:
|
|
|
Don't overwrite server IP address or boot file name
|
|
|
when the boot server does not return values
|
|
|
|
|
|
* Patch by listmember@orkun.us, 5 Mar 2004:
|
|
|
Removed compile time restriction on CFG_I2C_SPEED for DS1338 RTC
|
|
|
|
|
|
* Patch by Tolunay Orkun, 5 Mar 2004:
|
|
|
Fix early board initialization for Cogent CSB272 board
|
|
|
|
|
|
* Patch by Ed Okerson, 3 Mar 2004:
|
|
|
fix CFI flash writes for little endian systems
|
|
|
|
|
|
* Patch by Reinhard Meyer, 01 Mar 2004:
|
|
|
generalize USB and IDE support for MPC5200 with according
|
|
|
changes to IceCube.h and TOP5200.h
|
|
|
add Am29LV256 256 MBit FLASH support for TOP5200 boards
|
|
|
add info about USB and IDE to README
|
|
|
|
|
|
* Patch by Yuli Barcohen, 4 Mar 2004:
|
|
|
Fix problems with GCC 3.3.x which changed handling of global
|
|
|
variables explicitly initialized to zero (now in .bss instead of
|
|
|
.data as before).
|
|
|
|
|
|
* Patch by Leon Kukovec, 02 Mar 2004:
|
|
|
add strswab() to fix IDE LBA capacity, firmware and model numbers
|
|
|
on little endian machines
|
|
|
|
|
|
* Patch by Masami Komiya, 02 Mar 2004:
|
|
|
- Remove get_ticks() from NFS code
|
|
|
- Add verification of RPC transaction ID
|
|
|
|
|
|
* Patch by Pierre Aubert, 02 Mar 2004:
|
|
|
cleanup for IDE and USB drivers for MPC5200
|
|
|
|
|
|
* Patch by Travis Sawyer, 01 Mar 2004:
|
|
|
Ocotea:
|
|
|
- Add IBM PPC440GX Ref Platform support (Ocotea)
|
|
|
Original code by Paul Reynolds <PaulReynolds@lhsolutions.com>
|
|
|
Adapted to U-Boot and 440GX port
|
|
|
440gx_enet.c:
|
|
|
- Add gracious handling of all Ethernet Pin Selections for 440GX
|
|
|
- Add RGMII selection for Cicada CIS8201 Gigabit PHY
|
|
|
ppc440.h:
|
|
|
- Add needed bit definitions
|
|
|
- Fix formatting
|
|
|
|
|
|
* Patch by Carl Riechers, 1 Mar 2004:
|
|
|
Add PPC440GX prbdv0 divider to fix memory clock calculation.
|
|
|
|
|
|
* Patch by Stephan Linz, 27 Feb 2004
|
|
|
- avoid problems for targets without NFS download support
|
|
|
|
|
|
* Patch by Rune Torgersen, 27 Feb 2004:
|
|
|
- Added LBA48 support (CONFIG_LBA48 & CFG_64BIT_LBA)
|
|
|
- Added support for 64bit printing in vsprintf (CFG_64BIT_VSPRINTF)
|
|
|
- Added support for 64bit strtoul (CFG_64BIT_STRTOUL)
|
|
|
|
|
|
* Patch by Masami Komiya, 27 Feb 2004:
|
|
|
Fix rarpboot: add autoload by NFS
|
|
|
|
|
|
* Patch by Dan Eisenhut, 26 Feb 2004:
|
|
|
fix flash_write return value in saveenv
|
|
|
|
|
|
* Patch by Stephan Linz, 11 Dec 2003
|
|
|
expand config.mk to avoid trigraph warnings on NIOS
|
|
|
|
|
|
* Rename "BMS2003" board into "HMI10"
|
|
|
|
|
|
* SX1 patches: use "serial#" for USB serial #; use redundand environment
|
|
|
storage; auto-set console on USB port (using preboot command)
|
|
|
|
|
|
* Add support for SX1 mobile phone; add support for USB-based console
|
|
|
(enable with "setenv stdout usbtty; setenv stdin usbtty")
|
|
|
|
|
|
* Fix LOWBOOT configuration for MPC5200 with DDR memory
|
|
|
|
|
|
* Fix SDRAM timings for LITE5200 / IceCube board
|
|
|
|
|
|
* Handle Auti-MDIX / connection status for INCA-IP
|
|
|
|
|
|
* Fix USB problems when attempting to read 0 bytes
|
|
|
|
|
|
* Patch by Travis Sawyer, 26 Feb 2004:
|
|
|
Fix broken compile for XPEDITE1K target.
|
|
|
|
|
|
* Patch by Stephan Linz, 26 Feb 2004:
|
|
|
Bug fix for NFS code on NIOS targets
|
|
|
|
|
|
* Patch by Stephen Williams, 26 Feb 2004:
|
|
|
Break up SystemACE reads of large block counts
|
|
|
|
|
|
* Patch by Pierre Aubert, 26 Feb 2004
|
|
|
add IDE support for MPC5200
|
|
|
|
|
|
* Patch by Masami Komiya, 26 Feb 2004:
|
|
|
add autoload via NFS
|
|
|
|
|
|
* Patch by Stephen Williams
|
|
|
Use of CONFIG_SERIAL_SOFTWARE_FIFO in board.c consistent with uses
|
|
|
elsewhere in the source.
|
|
|
|
|
|
* Patch by Steven Scholz, 25 Feb 2004:
|
|
|
- Timeouts in FPGA code should be based on CFG_HZ
|
|
|
- Minor cleanup in code for Altera FPGA ACEX1K
|
|
|
|
|
|
* Patch by Steven Scholz, 25 Feb 2004:
|
|
|
Changed "Directory Hierarchy" section in README
|
|
|
|
|
|
* Patch by Masami Komiya, 25 Feb 2004:
|
|
|
Reduce copy count in nfs_read_reply() of NFS code
|
|
|
|
|
|
* Patch by Markus Pietrek, 24 Feb 2004:
|
|
|
NS9750 DevBoard added
|
|
|
|
|
|
* Patch by Pierre Aubert, 24 Feb 2004
|
|
|
add USB support for MPC5200
|
|
|
|
|
|
* Patch by Steven Scholz, 24 Feb 2004:
|
|
|
- fix MII commands to use values from last command
|
|
|
|
|
|
* Patch by Torsten Demke, 24 Feb 2004:
|
|
|
Add support for the eXalion platform (SPSW-8240, F-30, F-300)
|
|
|
|
|
|
* Patch by Rahul Shanbhag, 19 Feb 2004:
|
|
|
Fixes for for OMAP1610 board:
|
|
|
- shift some IRQ specific code to platform.S file
|
|
|
- remove duplicatewatchdog reset code from start.S
|
|
|
|
|
|
* Make Auto-MDIX Support configurable on INCA-IP board
|
|
|
|
|
|
* Fix license for mkimage tool
|
|
|
|
|
|
* Patch by Masami Komiya, 24 Feb 2004:
|
|
|
Update NetBootFileXferSize in NFS code
|
|
|
|
|
|
* Patch by Scott McNutt, 24 Feb 2004:
|
|
|
fix packet length in NFS code
|
|
|
|
|
|
* Patch by Masami Komiy, 22 Feb 2004:
|
|
|
Add support for NFS for file download
|
|
|
|
|
|
* Patch by Andrea Scian, 17 Feb 2004:
|
|
|
Add support for S3C44B0 processor and DAVE B2 board
|
|
|
|
|
|
* Patch by Steven Scholz, 20 Feb 2004:
|
|
|
- Add support for MII commands on AT91RM9200 boards
|
|
|
- some cleanup in AT91RM9200 ethernet code
|
|
|
|
|
|
* Patch by Peter Ryser, 20 Feb 2004:
|
|
|
Add support for the Xilinx ML300 platform
|
|
|
|
|
|
* Patch by Stephan Linz, 17 Feb 2004:
|
|
|
Fix watchdog support for NIOS
|
|
|
|
|
|
* Patch by Josh Fryman, 16 Feb 2004:
|
|
|
Fix byte-swapping for cfi_flash.c for different bus widths
|
|
|
|
|
|
* Patch by Jon Diekema, 14 Jeb 2004:
|
|
|
Remove duplicate "FPGA Support" notes from the README file
|
|
|
|
|
|
* Patches by Reinhard Meyer, 14 Feb 2004:
|
|
|
- update board/emk tree; use common flash driver
|
|
|
- Corrected tested bits in machine check exception in cpu/mpc5xxx/traps.c
|
|
|
[adapted for other PPC CPUs -- wd]
|
|
|
- Added support for the M48T08 on the EVAL5200 board in rtc/mk48t59.c
|
|
|
|
|
|
* Patch by Jon Diekema, 13 Feb 2004:
|
|
|
Call show_boot_progress() whenever POST "FAILED" is printed.
|
|
|
|
|
|
* Patch by Nishant Kamat, 13 Feb 2004:
|
|
|
Add support for TI OMAP1610 H2 Board
|
|
|
Fixes for cpu/arm926ejs/interrupt.c
|
|
|
(based on Richard Woodruff's patch for arm925, 16 Oct 03)
|
|
|
Fix for a timer bug in OMAP1610 Innovator
|
|
|
Add support for CS0 (ROM)/CS3 (Flash) boot in OMAP1610 Innovator and H2
|
|
|
|
|
|
* Patches by Stephan Linz, 12 Feb 2004:
|
|
|
- add support for NIOS timer with variable period preload counter value
|
|
|
- prepare POST framework support for NIOS targets
|
|
|
|
|
|
* Patch by Denis Peter, 11 Feb 2004:
|
|
|
add POST support for the MIP405 board
|
|
|
|
|
|
* Patch by Laurent Mohin, 10 Feb 2004:
|
|
|
Fix buffer overflow in common/usb.c
|
|
|
|
|
|
* Patch by Tolunay Orkun, 10 Feb 2004:
|
|
|
Add support for Cogent CSB272 board
|
|
|
|
|
|
* Patch by Thomas Elste, 10 Feb 2004:
|
|
|
Add support for NET+50 CPU and ModNET50 board
|
|
|
|
|
|
* Patch by Sam Song, 10 Feb 2004:
|
|
|
Fix typos in cfi_flash.c
|
|
|
|
|
|
* Patch by Leon Kukovec, 10 Feb 2004
|
|
|
Fixed long dir entry slot id calculation in get_vfatname
|
|
|
|
|
|
* Patch by Robin Gilks, 10 Feb 2004:
|
|
|
add "itest" command (operators: -eq, -ne, -lt, -gt, -le, -ge, ==,
|
|
|
!=, <>, <, >, <=, >=)
|
|
|
|
|
|
* Fix problem with side effects in macros in include/usb.h
|
|
|
|
|
|
* Patch by David Benson, 13 Nov 2003:
|
|
|
bug 841358 - fix TFTP download size limit
|
|
|
|
|
|
* Fixing bug 850768:
|
|
|
improper flush_cache() in load_serial()
|
|
|
|
|
|
* Fixing bug 834943:
|
|
|
MPC8540 - missing volatile declarations
|
|
|
|
|
|
* Patch by Stephen Williams, 09 Feb 2004:
|
|
|
Add support for Xilinx SystemACE chip:
|
|
|
- New files common/cmd_ace.c and include/systemace.h
|
|
|
- Hook systemace support into cmd_fat and the partition manager
|
|
|
|
|
|
* Patch by Travis Sawyer, 09 Feb 2004:
|
|
|
Add bi_opbfreq & bi_iic_fast to 440GX bd_info as needed for Linux
|
|
|
|
|
|
* Patch by Travis Sawyer, 09 Feb 2004:
|
|
|
o 440GX:
|
|
|
- Fix PCI Indirect access for type 1 config cycles with ppc440.
|
|
|
- Add phymode for 440 enet
|
|
|
- fix pci pre init
|
|
|
o XPedite1K:
|
|
|
- Change board_pre_init to board_early_init_f
|
|
|
- Add user flash to bus controller setup
|
|
|
- Fix pci pre init
|
|
|
- Fix is_pci_host to check GPIO for monarch bit
|
|
|
- Force xpedite1k to pci conventional mode (via #define option)
|
|
|
|
|
|
* Patch by Brad Kemp, 4 Feb 2004:
|
|
|
- handle the machine check that is generated during the PCI scans
|
|
|
on 82xx processors.
|
|
|
- define the registers used in the IMMR by the PCI subsystem.
|
|
|
|
|
|
* Patch by Pierre Aubert, 03 Feb 2004:
|
|
|
cpu/mpc5xxx/start.S: copy MBAR into SPR311
|
|
|
|
|
|
* Patch by Jeff Angielski, 03 Feb 2004:
|
|
|
Fix copy & paste error in cpu/mpc8260/pci.c
|
|
|
|
|
|
* Patch by Reinhard Meyer, 24 Jan 2004:
|
|
|
Fix typo in cpu/mpc5xxx/pci_mpc5200.c
|
|
|
|
|
|
* Add Auto-MDIX support for INCA-IP
|
|
|
|
|
|
* Some code cleanup
|
|
|
|
|
|
* Patch by Josef Baumgartner, 10 Feb 2004:
|
|
|
Fixes for Coldfire port
|
|
|
|
|
|
* Patch by Brad Kemp, 11 Feb 2004:
|
|
|
Fix CFI flash driver problems
|
|
|
|
|
|
* Make sure to use a bus clock divider of 2 only when running TQM8xxM
|
|
|
modules at CPU clock frequencies above 66 MHz.
|
|
|
|
|
|
* Optimize flash programming speed for LWMON (by another 100% :-)
|
|
|
|
|
|
* Patch by Jian Zhang, 3 Feb 2004:
|
|
|
- Changed the incorrect FAT12BUFSIZE
|
|
|
- data_begin in fsdata can be negative. Changed it to be short.
|
|
|
|
|
|
* Patches by Stephan Linz, 30 Jan 2004:
|
|
|
1: - board/altera/common/flash.c:flash_erase():
|
|
|
o allow interrupts befor get_timer() call
|
|
|
o check-up each erased sector and avoid unexpected timeouts
|
|
|
- board/altera/dk1c20/dk1s10.c:board_early_init_f():
|
|
|
o enclose sevenseg_set() in cpp condition
|
|
|
- remove the ASMI configuration for DK1S10_standard_32 (never present)
|
|
|
- fix some typed in mistakes in the NIOS documentation
|
|
|
2: - split DK1C20 configuration into several header files:
|
|
|
o two new files for each NIOS CPU description
|
|
|
o U-Boot related part is remaining in DK1C20.h
|
|
|
3: - split DK1S10 configuration into several header files:
|
|
|
o two new files for each NIOS CPU description
|
|
|
o U-Boot related part is remaining in DK1S10.h
|
|
|
4: - Add support for the Microtronix Linux Development Kit
|
|
|
NIOS CPU configuration at the Altera Nios Development Kit,
|
|
|
Stratix Edition (DK-1S10)
|
|
|
5: - Add documentation for the Altera Nios Development Kit,
|
|
|
Stratix Edition (DK-1S10)
|
|
|
6: - Add support for the Nios Serial Peripharel Interface (SPI)
|
|
|
(master only)
|
|
|
7: - Add support for the common U-Boot SPI framework at
|
|
|
RTC driver DS1306
|
|
|
|
|
|
* Patch by Rahul Shanbhag, 28 Jan 2004:
|
|
|
Fix flash protection/locking handling for OMAP1610 innovator board.
|
|
|
|
|
|
* Patch by Rolf Peukert, 28 Jan 2004:
|
|
|
fix flash write problems on CSB226 board (write with 32 bit bus width)
|
|
|
|
|
|
* Patches by Mark Jonas, 16 Jan 2004:
|
|
|
- fix rounding error when calculating baudrates for MPC5200 PSCs
|
|
|
- make sure CFG_RAMBOOT and CFG_LOWBOOT are not enabled at the same
|
|
|
time which is not supported
|
|
|
|
|
|
* Patch by Yuli Barcohen, 26 Jan 2004:
|
|
|
Allow bzip2 compression for small memory footprint boards
|
|
|
|
|
|
* Patch by Brad Kemp, 21 Jan 2004:
|
|
|
Add support for CFI flash driver for both the Intel and the AMD
|
|
|
command sets.
|
|
|
|
|
|
* Patch by Travis Sawyer, 20 Jan 2004:
|
|
|
Fix pci bridge auto enumeration of sibling p2p bridges.
|
|
|
|
|
|
* Patch by Tolunay Orkun, 12 Jan 2004:
|
|
|
Add some delays as needed for Intel LXT971A PHY support
|
|
|
|
|
|
* Patches by Stephan Linz, 09 Jan 2004:
|
|
|
- avoid warning: unused variable `piop' in board/altera/common/sevenseg.c
|
|
|
- make DK1C20 board configuration related to ASMI conform to
|
|
|
documentation
|
|
|
|
|
|
* Patch by Anders Larsen, 09 Jan 2004:
|
|
|
|
|
|
ARM memory layout fixes: the abort-stack is now set up in the
|
|
|
correct RAM area, and the BSS is zeroed out as it should be.
|
|
|
|
|
|
Furthermore, the magic variables 'armboot_end' and 'armboot_end_data'
|
|
|
of the linker scripts are replaced by '__bss_start' and '_end',
|
|
|
resp., which is a further step to eliminate unnecessary differences
|
|
|
between the implementation of the CPU architectures.
|
|
|
|
|
|
* Patch by liang a lei, 9 Jan 2004:
|
|
|
Fix Intel 28F128J3 ID in include/flash.h
|
|
|
|
|
|
* Patch by Masami Komiya, 09 Jan 2004:
|
|
|
add support for TB0229 board (NEC VR4131 MIPS processor)
|
|
|
|
|
|
* Patch by Leon Kukovec, 12 Dec 2003:
|
|
|
changed extern __inline__ into static __inline__ in
|
|
|
include/linux/byteorder/swab.h
|
|
|
|
|
|
* Patch by Travis Sawyer, 30 Dec 2003:
|
|
|
Add support for IBM PPC440GX. Multiple EMAC Ethernet devices,
|
|
|
select MDI port based on enabled EMAC device.
|
|
|
Add support for XES Inc <http://www.xes-inc.com> XPedite1000 440GX
|
|
|
base PrPMC board.
|
|
|
|
|
|
* Patch by Wolter Kamphuis, 15 Dec 2003:
|
|
|
made CONFIG_SILENT_CONSOLE usable on all architectures
|
|
|
|
|
|
* Disable date command on TQM866M - there is no RTC on MPC866
|
|
|
|
|
|
* Fix variable CPU clock for MPC859/866 systems for low CPU clocks
|
|
|
|
|
|
* Implement adaptive SDRAM timing configuration based on actual CPU
|
|
|
clock frequency for INCA-IP; fix problem with board hanging when
|
|
|
switching from 150MHz to 100MHz
|
|
|
|
|
|
* Add PCMCIA CS support for BMS2003 board
|
|
|
|
|
|
* Add variable CPU clock for MPC859/866 systems (so far only TQM866M):
|
|
|
see doc/README.MPC866 for details;
|
|
|
implement workaround for "SIU4" and "SIU9" silicon bugs on MPC866;
|
|
|
calculate CPU clock frequency from PLL register values.
|
|
|
|
|
|
* Add support for 128 MB RAM on TQM8xxL/M modules
|
|
|
|
|
|
* Fix PS/2 keyboard problem caused by statically initialized variable
|
|
|
pointing to a location in flash
|
|
|
|
|
|
* Fix INCA-IP clock calculation: 400/3 = 133.3 MHz, not 130.
|
|
|
|
|
|
* The PS/2 mux on the BMS2003 board needs 450 ms after power on
|
|
|
before we can access it; add delay in case we are faster (with no
|
|
|
CF card inserted)
|
|
|
|
|
|
* Cleanup of some init functions
|
|
|
|
|
|
* Make sure SCC Ethernet is always stopped by the time we boot Linux
|
|
|
to avoid Linux crashes by early packets coming in.
|
|
|
|
|
|
* Accelerate flash accesses on LWMON board by using buffered writes
|
|
|
|
|
|
* Fix typo in Makefile;
|
|
|
fix problem with PARTNUM detection
|
|
|
|
|
|
* Patch by Reinhard Meyer, 09 Jan 2004:
|
|
|
- add RTC support for MPC5200 based boards (requires RTC_XTAL)
|
|
|
|
|
|
* Add support for IDE LED on BMS2003 board
|
|
|
(exclusive with status LED!)
|
|
|
|
|
|
* Add support for PS/2 keyboard (used with PS/2 multiplexor on
|
|
|
BMS2003 board)
|
|
|
|
|
|
* Patches by Reinhard Meyer, 4 Jan 2004 + 7 Jan 2004:
|
|
|
Add common files for "emk" boards
|
|
|
|
|
|
* Add a common get_ram_size() function and modify the the
|
|
|
board-specific files to invoke that common implementation.
|
|
|
|
|
|
======================================================================
|
|
|
Changes for U-Boot 1.0.1:
|
|
|
======================================================================
|
|
|
|
|
|
* Set default clock for INCA-IP to 150 MHz
|
|
|
|
|
|
* Make BMS2003 use a separate config file to avoid #ifdef mess;
|
|
|
add I2C support; add support for DS1337 RTC
|
|
|
|
|
|
* Add CompactFlash support for BMS2003 board
|
|
|
|
|
|
* Add support for status LED on BMS2003 board
|
|
|
|
|
|
* Patch by Scott McNutt, 02 Jan 2004:
|
|
|
Add support for the Nios Active Serial Memory Interface (ASMI)
|
|
|
on Cyclone devices
|
|
|
|
|
|
* Patch by Andrea Marson, 16 Dec 2003:
|
|
|
Add support for the PPChameleon ME and HI modules
|
|
|
|
|
|
* Patch by Yuli Barcohen, 22 Dec 2003:
|
|
|
Add support for Motorola DUET ADS board (MPC87x/88x)
|
|
|
|
|
|
* Patch by Robert Schwebel, 15 Dec 2003:
|
|
|
add support for cramfs (uses JFFS2 command interface)
|
|
|
|
|
|
* Patches by Stephan Linz, 11 Dec 2003:
|
|
|
- more documentation for NIOS port
|
|
|
- new struct nios_pio_t, struct nios_spi_t
|
|
|
- Reconfiguration for NIOS Development Kit DK1C20:
|
|
|
o move board related code from board/dk1c20
|
|
|
to board/altera/dk1c20
|
|
|
o create a new common source path board/altera/common
|
|
|
and move generic flash access stuff into it
|
|
|
o change/expand configuration file DK1C20.h
|
|
|
- Add support for NIOS Development Kit DK1S10
|
|
|
- Add status LED support for NIOS systems
|
|
|
- Add dual 7-segment LED support for Altera NIOS DevKits
|
|
|
|
|
|
* Patch by Ronen Shitrit, 10 Dec 2003:
|
|
|
Add support for the Marvell DB64360 / DB64460 development boards
|
|
|
|
|
|
* Patch by Detlev Zundel, 10 Dec 2003:
|
|
|
fix dependency problem in examples/Makefile
|
|
|
|
|
|
* Patch by Denis Peter, 8 Dec 2003
|
|
|
- add support for the PATI board (MPC555)
|
|
|
- add SPI support for the MPC5xx
|
|
|
|
|
|
* Patch by Anders Larsen, 08 Dec 2003:
|
|
|
add configuration options CONFIG_SERIAL_TAG and CONFIG_REVISION_TAG
|
|
|
to pass ATAG_SERIAL and ATAG_REVISION, resp., to the ARM target;
|
|
|
cleanup some redundand #defines
|
|
|
|
|
|
* Patch by Andr<EFBFBD> Schwarz, 8 Dec 2003:
|
|
|
fixes for Davicom DM9102A Ethernet Chip (#define CONFIG_TULIP_FIX_DAVICOM):
|
|
|
- TX and RX deskriptors must be quad-word aligned
|
|
|
- does not work with only one TX deskriptor
|
|
|
- standard reset method does not work
|
|
|
|
|
|
* Patch by Masami Komiya, 08 Dec 2003:
|
|
|
add RTL8139 ethernet driver
|
|
|
|
|
|
* Patches by Ed Okerson, 07 Dec 2003:
|
|
|
- fix ethernet for the AU1x00 processors in little-endian mode.
|
|
|
- extend memsetup.S for the AU1x00 processors in BE and LE modes
|
|
|
|
|
|
* Minor code cleanup (coding style)
|
|
|
|
|
|
* Patch by Reinhard Meyer, 30 Dec 2003:
|
|
|
- cpu/mpc5xxx/fec.c: added CONFIG_PHY_ADDR, added CONFIG_PHY_TYPE,
|
|
|
- added CONFIG_PHY_ADDR to include/configs/IceCube.h,
|
|
|
- turned debug print of PHY registers into a function (called in two places)
|
|
|
- added support for EMK MPC5200 based modules
|
|
|
|
|
|
* Fix MPC8xx PLPRCR_MFD_SHIFT typo
|
|
|
|
|
|
* Add support for TQM866M modules
|
|
|
|
|
|
* Fixes for TQM855M with 4 MB flash (Am29DL163 = _no_ mirror bit flash)
|
|
|
|
|
|
* Fix a few compiler warnings
|
|
|
|
|
|
* Patch by Reinhard Meyer, 28 Dec 2003:
|
|
|
Add initial support for TOP5200 board
|
|
|
|
|
|
* Make CPU clock on ICA-IP board controllable by a "cpuclk"
|
|
|
environment variable which can set to "100", "133", or "150". The
|
|
|
CPU clock will be configured accordingly upon next reboot. Other
|
|
|
values are ignored. In case of an invalid or undefined "cpuclk"
|
|
|
value, the compile-time default CPU clock speed will be used.
|
|
|
|
|
|
* Enable Quad-UART on BMS2003 board (initialize the PCMCIA memory
|
|
|
window that is used to access the UART registers by the Linux driver)
|
|
|
|
|
|
* Patch by Reinhard Meyer, 20 Dec 2003:
|
|
|
Fix clock calculation for the MPC5200 for higher clock frequencies
|
|
|
(above 2**32 / 10 = 429.5 MHz).
|
|
|
|
|
|
* Fix CONFIG_PLL_PCI_TO_MEM_MULTIPLIER divider error in SP8240 configuration
|
|
|
|
|
|
* Fix IceCube CLKIN configuration (it's 33.000000MHz)
|
|
|
|
|
|
* Add new configuration for IceCube board with DDR memory
|
|
|
|
|
|
* Update TRAB memory configurations
|
|
|
|
|
|
* Add JFFS2 support for INCA-IP board
|
|
|
|
|
|
* Patch by Bill Hargen, 09 Dec 2003:
|
|
|
- BUBINGA405EP: changed flash driver to protect top sector containing
|
|
|
first instruction.
|
|
|
- BUBINGA405EP: configured "eeprom" command to access boot config EEPROM.
|
|
|
- BUBINGA405EP: fixed PLL init (init chip selects before FPGA/NVRAM access).
|
|
|
- 405EP: fixed SPD-based SDRAM init (only use banks 0 and 1).
|
|
|
- 405EP: added/fixed support for "reginfo" command.
|
|
|
- 4xx: removed spurious MII error messages on "mii info" command.
|
|
|
|
|
|
* Patch by Bernhard Kuhn, 28 Nov 2003:
|
|
|
add support for Coldfire CPU
|
|
|
add support for Motorola M5272C3 and M5282EVB boards
|
|
|
|
|
|
* Patch by Pierre Aubert, 24 Nov 2003:
|
|
|
- add a return value for the fpga command
|
|
|
- add ide_preinit() function called in ide_init if CONFIG_IDE_PREINIT
|
|
|
is defined. If ide_preinit fails, ide_init is aborted.
|
|
|
- fix an endianess problem in fat.h
|
|
|
|
|
|
* Patch by Wolter Kamphuis, 05 Dec 2003:
|
|
|
Add support for SNMC's QS850/QS823/QS860T boards
|
|
|
|
|
|
* Patch by Yuli Barcohen, 3 Dec 2003:
|
|
|
"revive" U-Boot support for old Motorola MPC860ADS board
|
|
|
|
|
|
* Patch by Cam(ilo?), 03 Dec 2003:
|
|
|
make examples build even with broken Montavista objcopy
|
|
|
|
|
|
* Patch by Pavel Bartusek, 27 Nov 2003:
|
|
|
fix conversion problem with "bootretry" evironment variable
|
|
|
|
|
|
* Patch by Andre Schwarz, 24 Nov 2003:
|
|
|
add support for mvblue (mvBlueLYNX and mvBlueBOX) boards
|
|
|
|
|
|
* Patch by Pavel Bartusek, 21 Nov 2003:
|
|
|
set ZMII bridge speed on 440
|
|
|
|
|
|
* Patch by Anders Larsen, 17 Nov 2003:
|
|
|
Fix mismatched #ifdef / #endif in include/asm-arm/arch-pxa/hardware.h
|
|
|
|
|
|
* Patches by David M<EFBFBD>ller, 14 Nov 2003:
|
|
|
- board/mpl/common/common_util.c
|
|
|
* implement support for BZIP2 compressed images
|
|
|
* various cleanups (printf -> puts, ...)
|
|
|
- board/mpl/common/flash.c
|
|
|
* report correct errors to upper layers
|
|
|
* check the erase fail and VPP low bits in status reg
|
|
|
- board/mpl/vcma9/cmd_vcma9.c
|
|
|
- board/mpl/vcma9/flash.c
|
|
|
* various cleanups (printf -> puts, ...)
|
|
|
- common/cmd_usb.c
|
|
|
* fix typo in comment
|
|
|
- cpu/arm920t/usb_ohci.c
|
|
|
* support for S3C2410 is missing in #if line
|
|
|
- drivers/cs8900.c
|
|
|
* reinit some registers in case of error (cable missing, ...)
|
|
|
- fs/fat/fat.c
|
|
|
* support for USB/MMC devices is missing in #if line
|
|
|
- include/configs/MIP405.h
|
|
|
- include/configs/PIP405.h
|
|
|
* enable BZIP2 support
|
|
|
* enlarge malloc space to 1MiB because of BZIP2 support
|
|
|
- include/configs/VCMA9.h
|
|
|
* enable BZIP2 support
|
|
|
* enlarge malloc space to 1MiB because of BZIP2 support
|
|
|
* enable USB support
|
|
|
- lib_arm/armlinux.c
|
|
|
* change calling convention of ARM Linux kernel as
|
|
|
described on http://www.arm.linux.org.uk/developer/booting.php
|
|
|
|
|
|
* Patch by Thomas Lange, 14 Nov 2003:
|
|
|
Split dbau1x00 into dbau1000, dbau1100 and dbau1500 configs to
|
|
|
support all these AMD boards.
|
|
|
|
|
|
* Patch by Thomas Lange, 14 Nov 2003:
|
|
|
Workaround for mips au1x00 physical memory accesses (the au1x00
|
|
|
uses a 36 bit bus internally and cannot access physical memory
|
|
|
directly. Use the uncached SDRAM address instead of the physical
|
|
|
one.)
|
|
|
|
|
|
* Patch by Xue Ligong (Joe), 13 Nov 2003:
|
|
|
add Realtek 8019 ethernet driver
|
|
|
|
|
|
* Patch by Yuli Barcohen, 13 Nov 2003:
|
|
|
MPC826xADS/PQ2FADS cleanup
|
|
|
|
|
|
* Patch by Anders Larsen, 12 Nov 2003:
|
|
|
Update README to mark the PORTIO commands non-standard
|
|
|
|
|
|
* Patch by Nicolas Lacressonni<EFBFBD>re, 12 Nov 2003:
|
|
|
update for for Atmel AT91RM9200DK development kit:
|
|
|
- support for environment variables in DataFlash
|
|
|
- Atmel DataFlash AT45DB1282 support
|
|
|
|
|
|
* Patch by Jeff Carr, 11 Nov 2003:
|
|
|
add support for new version of 8270 processors
|
|
|
|
|
|
* Patches by George G. Davis, 05 Nov 2003:
|
|
|
- only pass the ARM linux initrd tag to the kernel when an initrd
|
|
|
is actually present
|
|
|
- update omap1510inn configuration file
|
|
|
|
|
|
* Patches by Stephan Linz, 3 Nov 2003:
|
|
|
- more endianess fixes for LAN91C111 driver
|
|
|
- CFG_HZ configuration patch for NIOS Cyclone board
|
|
|
|
|
|
* Patch by Stephan Linz, 28 Oct 2003:
|
|
|
fix PHY_INT_REG vs. PHY_MASK_REG bug in drivers/smc91111.c
|
|
|
|
|
|
* Patch by Steven Scholz, 20 Oct 2003:
|
|
|
- make "mii info <addr>" show infor for PHY at "addr" only
|
|
|
- Endian fix for miiphy_info()
|
|
|
|
|
|
* Patch by Gleb Natapov, 19 Sep 2003:
|
|
|
Move most of the timer interrupt related PPC code to ppc_lib/interrupts.c
|
|
|
|
|
|
* Patch by Anders Larsen, 17 Sep 2003:
|
|
|
Bring ARM memory layout in sync with the documentation:
|
|
|
stack and malloc-heap are now located _below_ the U-Boot code
|
|
|
|
|
|
* Accelerate booting on TRAB board: read and check autoupdate image
|
|
|
headers first instead of always reading the whole images.
|
|
|
|
|
|
* Fix type in MPC5XXX code (pointed out by Victor Wren)
|
|
|
|
|
|
* Enabled password check on RMU board
|
|
|
|
|
|
* Fix configuration problem with IceCube in LOWBOOT configuration:
|
|
|
envrionment got embedded, corrupting the image layout.
|
|
|
|
|
|
* Fix NEC display names (it's 6440 [for 640x480], not 6640).
|
|
|
|
|
|
* Added BMS2003 board
|
|
|
add support for NEC NL6448BC33-54. 10.4", 640x480 TFT display
|
|
|
|
|
|
* Fix flash driver for TRAB board (must use Unlock Bypass Reset
|
|
|
command to exit Unlock Bypass Mode); adjust timings for flash, SRAM
|
|
|
and CPLD
|
|
|
|
|
|
* Use "-fPIC" instead of "-mrelocatable" to prevent problems with
|
|
|
recent tools
|
|
|
|
|
|
* Add checksum verification to 'imls' command
|
|
|
|
|
|
* Add bd_info fields needed for 4xx Linux I2C driver
|
|
|
|
|
|
* Patch by Martin Krause, 4 Nov. 2003:
|
|
|
Fix error in cmd_vfd.c (TRAB board: "vfd /1" shows now only one Bitmap)
|
|
|
|
|
|
* Print used network interface when CONFIG_NET_MULTI is set
|
|
|
|
|
|
* Patch by Bernhard Kuhn, 28 Oct 2003:
|
|
|
Add low boot support for MPC5200
|
|
|
|
|
|
* Fix problem with dual PCMCIA support (NSCU)
|
|
|
|
|
|
* Fix MPC5200 I2C initialization function
|
|
|
|
|
|
======================================================================
|
|
|
Changes for U-Boot 1.0.0:
|
|
|
======================================================================
|
|
|
|
|
|
* Fix parameter passing to standalone images with bootm command
|
|
|
|
|
|
* Patch by Kyle Harris, 30 Oct 2003:
|
|
|
Fix build errors for ixdp425 board
|
|
|
|
|
|
* Patch by David M. Horn, 29 Oct 2003:
|
|
|
Fixes to build under CYGWIN
|
|
|
|
|
|
* Get IceCube MGT5100 working (again)
|
|
|
|
|
|
* Fix problems in memory test on some boards (which was not
|
|
|
non-destructive as intended)
|
|
|
|
|
|
* Patch by Gary Jennejohn, 28 Oct 2003:
|
|
|
Change fs/fat/fat.c to put I/O buffers in BSS instead on the stack
|
|
|
to prevent stack overflow on ARM systems
|
|
|
|
|
|
* Patch by Stephan Linz, 28 Oct 2003:
|
|
|
fix init sequence error for NIOS port
|
|
|
|
|
|
* Allow lowercase spelling for IceCube_5200; support MPC5200LITE name
|
|
|
|
|
|
* Add CONFIG_VERSION_VARIABLE to TRAB configuration
|
|
|
|
|
|
* Patch by Xiao Xianghua, 23 Oct 2003:
|
|
|
small patch for mpc85xx
|
|
|
|
|
|
* Fix small problem in MPC5200 I2C driver
|
|
|
|
|
|
* Fix FCC3 support on ATC board
|
|
|
|
|
|
* Correct header printing for multi-image files in do_bootm()
|
|
|
|
|
|
* Make CONFIG_SILENT_CONSOLE work with CONFIG_AUTOBOOT_KEYED
|
|
|
|
|
|
* Fix PCI problems on PPChameleon board
|
|
|
|
|
|
* Patch by Steven Scholz, 18 Oct 2003:
|
|
|
Fix AT91RM9200 ethernet driver
|
|
|
|
|
|
* Patch by Nye Liu, 17 Oct 2003:
|
|
|
Fix typo in include/mpc8xx.h
|
|
|
|
|
|
* Patch by Richard Woodruff, 16 Oct 03:
|
|
|
Fixes for cpu/arm925/interrupt.c
|
|
|
- Initialize timestamp & lastdec vars.
|
|
|
- fix timestamp overflows.
|
|
|
- fix lastdec overflow.
|
|
|
- smarter normalization to allow udelay() below 1ms to work.
|
|
|
|
|
|
* Patch by Scott McNutt, 16 Oct
|
|
|
add networking support for the Altera Nios Development Kit,
|
|
|
Cyclone Edition (DK-1C20)
|
|
|
|
|
|
* Patch by Jon Diekema, 14 Oct 2003:
|
|
|
add hint about doc/README.silent to README file
|
|
|
|
|
|
* Add CompactFlash support for NSCU
|
|
|
|
|
|
* Fix PCI problems on PPChameleonEVB
|
|
|
|
|
|
* TRAB auto-update: Base decision if we have to strip the image
|
|
|
header on image type as encoded in the header
|
|
|
(include image type patch by Martin Krause, 17 Oct 2003)
|
|
|
|
|
|
* Patches by Xianghua Xiao, 15 Oct 2003:
|
|
|
|
|
|
- Added Motorola CPU 8540/8560 support (cpu/85xx)
|
|
|
- Added Motorola MPC8540ADS board support (board/mpc8540ads)
|
|
|
- Added Motorola MPC8560ADS board support (board/mpc8560ads)
|
|
|
|
|
|
* Fix flash timings on TRAB board
|
|
|
|
|
|
* Make sure HUSH is initialized for running auto-update scripts
|
|
|
|
|
|
* Make 5200 reset command _really_ reset the board, without running
|
|
|
any other code after it
|
|
|
|
|
|
* Fix errors with flash erase when range spans across banks
|
|
|
that are mapped in reverse order
|
|
|
|
|
|
* Fix flash mapping and display on P3G4 board
|
|
|
|
|
|
* Patch by Kyle Harris, 15 Jul 2003:
|
|
|
- add support for Intel IXP425 CPU
|
|
|
- add support for IXDP425 eval board
|
|
|
|
|
|
* Added config option CONFIG_SILENT_CONSOLE. See doc/README.silent
|
|
|
for more information
|
|
|
|
|
|
* Patch by Steven Scholz, 10 Oct 2003
|
|
|
- Add support for Altera FPGA ACEX1K
|
|
|
|
|
|
* Patches by Thomas Lange, 09 Oct 2003:
|
|
|
- fix cmd_ide.c for non ppc boards (read/write functions did not
|
|
|
add ATA base address)
|
|
|
- fix for shannon board
|
|
|
- #ifdef CONFIG_IDE_8xx_DIRECT some otherwise unused code
|
|
|
- Endian swap ATA identity for all big endian CPUs, not just PPC
|
|
|
- MIPS only: New option CONFIG_MEMSIZE_IN_BYTES for passing memsize
|
|
|
args to linux
|
|
|
- add support for dbau1x00 board (MIPS32)
|
|
|
|
|
|
* Patch by Sangmoon Kim, 07 Oct 2003:
|
|
|
add support for debris board
|
|
|
|
|
|
* Patch by Martin Krause, 09 Oct 2003:
|
|
|
Fixes for TRAB board
|
|
|
- /board/trab/rs485.c: correct baudrate
|
|
|
- /board/trab/cmd_trab.c: bug fix for problem with timer overflow in
|
|
|
udelay(); fix some timing problems with adc controller
|
|
|
- /board/trab/trab_fkt.c: add new commands: gain, eeprom and power;
|
|
|
modify commands: touch and buzzer
|
|
|
|
|
|
* Disable CONFIG_SUPPORT_VFAT when used with CONFIG_AUTO_UPDATE
|
|
|
(quick & dirty workaround for rogue pointer problem in get_vfatname());
|
|
|
Use direct function calls for auto_update instead of hush commands
|
|
|
|
|
|
* Patch by Scott McNutt, 04 Oct 2003:
|
|
|
- add support for Altera Nios-32 CPU
|
|
|
- add support for Nios Cyclone Development Kit (DK-1C20)
|
|
|
|
|
|
* Patch by Steven Scholz, 29 Sep 2003:
|
|
|
- A second parameter for bootm overwrites the load address for
|
|
|
"Standalone Application" images.
|
|
|
- bootm sets environment variable "filesize" to the resulting
|
|
|
(uncompressed) data length for "Standalone Application" images
|
|
|
when autostart is set to "no". Now you can do something like
|
|
|
if bootm $fpgadata $some_free_ram ; then
|
|
|
fpga load 0 $some_free_ram $filesize
|
|
|
fi
|
|
|
|
|
|
* Patch by Denis Peter, 25 Sept 2003:
|
|
|
add support for the MIP405 Rev. C board
|
|
|
|
|
|
* Patch by Yuli Barcohen, 25 Sep 2003:
|
|
|
add support for Zephyr Engineering ZPC.1900 board
|
|
|
|
|
|
* Patch by Anders Larsen, 23 Sep 2003:
|
|
|
add CMD_PORTIO to CFG_CMD_NONSTD (commands in question are only
|
|
|
implemented for the x86 architecture)
|
|
|
|
|
|
* Patch by Sangmoon Kim, 23 Sep 2003:
|
|
|
fix pll_pci_to_mem_multiplier table for MPC8245
|
|
|
|
|
|
* Patch by Anders Larsen, 22 Sep 2003:
|
|
|
enable timed autoboot on PXA
|
|
|
|
|
|
* Patch by David M<EFBFBD>ller, 22 Sep 2003:
|
|
|
- add $(CFLAGS) to "-print-libgcc-filename" so compiler driver
|
|
|
returns correct libgcc file path
|
|
|
- "latency" reduction of busy-loop waiting to improve "U-Boot" boot
|
|
|
time on s3c24x0 systems
|
|
|
|
|
|
* Patch by Jon Diekema, 19 Sep 2003:
|
|
|
- Add CFG_FAULT_ECHO_LINK_DOWN option to echo the inverted Ethernet
|
|
|
link state to the fault LED.
|
|
|
- In NetLoop, make the Fault LED reflect the link status. The link
|
|
|
status gets updated on entry, and on timeouts.
|
|
|
|
|
|
* Patch by Anders Larsen, 18 Sep 2003:
|
|
|
allow mkimage to build and run on Cygwin-hosted systems
|
|
|
|
|
|
* Patch by Frank M<EFBFBD>ller, 18 Sep 2003:
|
|
|
use bi_intfreq instead of bi_busfreq to compute fec_mii_speed in
|
|
|
cpu/mpc8xx/fec.c
|
|
|
|
|
|
* Patch by Pantelis Antoniou, 16 Sep 2003:
|
|
|
add tool to compute fileds in the PLPRCR register for MPC86x
|
|
|
|
|
|
* Use IH_TYPE_FILESYSTEM for TRAB "disk" images.
|
|
|
|
|
|
* Fix build problems under FreeBSD
|
|
|
|
|
|
* Add generic filesystem image type
|
|
|
|
|
|
* Make fatload set filesize environment variable
|
|
|
|
|
|
* enable basic / medium / high-end configurations for PPChameleonEVB
|
|
|
board; fix NAND code
|
|
|
|
|
|
* enable TFTP client code to specify to the server the desired
|
|
|
timeout value (see RFC-2349)
|
|
|
|
|
|
* Improve SDRAM setup for TRAB board
|
|
|
|
|
|
* Suppress all output with splashscreen configured only if "splashimage"
|
|
|
is set
|
|
|
|
|
|
* Fix problems with I2C support for mpc5200
|
|
|
|
|
|
* Adapt TRAB configuration and auto_update to new memory layout
|
|
|
|
|
|
* Add configuration for wtk board
|
|
|
|
|
|
* Add support for the Sharp LQ065T9DR51U LCD display
|
|
|
|
|
|
* Patch by Rune Torgersen, 17 Sep 2003:
|
|
|
- Fixes for MPC8266 default config
|
|
|
- Allow eth_loopback_test() on 8260 to use a subset of the FCC's
|
|
|
|
|
|
* Patches by Jon Diekema, 17 Sep 2003:
|
|
|
- update README (SHOW_BOOT_PROGRESS values for cmd_nand.c and
|
|
|
env_common.c)
|
|
|
- sbc8260 tweaks
|
|
|
- adjust "help" output
|
|
|
|
|
|
* Patches by Anders Larsen, 17 Sep 2003:
|
|
|
- fix spelling errors
|
|
|
- set GD_FLG_DEVINIT flag only after device function pointers
|
|
|
are valid
|
|
|
- Allow CFG_ALT_MEMTEST on systems where address zero isn't
|
|
|
writeable
|
|
|
- enable 3.rd UART (ST-UART) on PXA(XScale) CPUs
|
|
|
- trigger watchdog while waiting in serial driver
|
|
|
|
|
|
* Add auto-update code for TRAB board using USB memory sticks,
|
|
|
support new configuration with more memory
|
|
|
|
|
|
* disable MPC5200 bus pipelining as workaround for bus contention
|
|
|
|
|
|
* Modify XLB arbiter priorities on MPC5200 so all devices use same
|
|
|
priority; configure critical interrupts to be handled like external
|
|
|
interrupts
|
|
|
|
|
|
* Make IPB clock on MGT5100/MPC5200 configurable in board config file;
|
|
|
go back to 66 MHz for stability
|
|
|
|
|
|
* Patches by Jon Diekema, 15 Sep 2003:
|
|
|
- add description for missing CFG_CMD_* entries in the README file
|
|
|
- sacsng tweaks
|
|
|
|
|
|
* Patch by Gleb Natapov, 14 Sep 2003:
|
|
|
enable watchdog support for all MPC824x boards that have a watchdog
|
|
|
|
|
|
* On MPC5200, restrict FEC to a maximum of 10 Mbps to work around the
|
|
|
"Non-octet Aligned Frame" errors we see at 100 Mbps
|
|
|
|
|
|
* Patch by Sharad Gupta, 14 Sep 2003:
|
|
|
fix SPR numbers for upper BAT register ([ID]BAT[4-7][UL])
|
|
|
|
|
|
* Patch by llandre, 11 Sep 2003:
|
|
|
update configuration for PPChameleonEVB board
|
|
|
|
|
|
* Patch by David M<EFBFBD>ller, 13 Sep 2003:
|
|
|
various changes to VCMA9 board specific files
|
|
|
|
|
|
* Add I2C support for MGT5100 / MPC5200
|
|
|
|
|
|
* Patch by Rune Torgersen, 11 Sep 2003:
|
|
|
Changed default memory option on MPC8266ADS to NOT be Page Based
|
|
|
Interleave, since this doesn't work very well with the standard
|
|
|
16MB DIMM
|
|
|
|
|
|
* Patch by George G. Davis, 12 Sep 2003:
|
|
|
fix Makefile settings for sk98 driver
|
|
|
|
|
|
* Patch by Stefan Roese, 12 Sep 2003:
|
|
|
- new boards added: DP405, HUB405, PLU405, VOH405
|
|
|
- some esd boards updated
|
|
|
- cpu/ppc4xx/sdram.c: disable memory controller before setting
|
|
|
first values
|
|
|
- cpu/ppc4xx/405_pci.c: set vendor id on PPC405EP systems
|
|
|
|
|
|
* Patch by Martin Krause, 11 Sep 2003:
|
|
|
add burn-in tests for TRAB board
|
|
|
|
|
|
* Enable instruction cache on MPC5200 board
|
|
|
|
|
|
* Patch by Denis Peter, 11 Sep 2003:
|
|
|
- fix USB data pointer assignment for bulk only transfer.
|
|
|
- prevent to display erased directories in FAT filesystem.
|
|
|
|
|
|
* Change output format for NAND flash - make it look like for other
|
|
|
memory, too
|
|
|
|
|
|
======================================================================
|
|
|
Changes for U-Boot 0.4.8:
|
|
|
======================================================================
|
|
|
|
|
|
* Add I2C and RTC support for RMU board
|
|
|
|
|
|
* Patches by Denis Peter, 9 Sep 2003:
|
|
|
add FAT support for IDE, SCSI and USB
|
|
|
|
|
|
* Patches by Gleb Natapov, 2 Sep 2003:
|
|
|
- cleanup of POST code for unsupported architectures
|
|
|
- MPC824x locks way0 of data cache for use as initial RAM;
|
|
|
this patch unlocks it after relocation to RAM and invalidates
|
|
|
the locked entries.
|
|
|
|
|
|
* Patch by Gleb Natapov, 30 Aug 2003:
|
|
|
new I2C driver for mpc107 bridge. Now works from flash.
|
|
|
|
|
|
* Patch by Dave Ellis, 11 Aug 2003:
|
|
|
- JFFS2: fix typo in common/cmd_jffs2.c
|
|
|
- JFFS2: fix CFG_JFFS2_SORT_FRAGMENTS option
|
|
|
- JFFS2: remove node version 0 warning
|
|
|
- JFFS2: accept JFFS2 PADDING nodes
|
|
|
- SXNI855T: add AM29LV800 support
|
|
|
- SXNI855T: move environment from EEPROM to flash
|
|
|
- SXNI855T: boot from JFFS2 in NOR or NAND flash
|
|
|
|
|
|
* Patch by Bill Hargen, 11 Aug 2003:
|
|
|
fixes for I2C on MPC8240
|
|
|
- fix i2c_write routine
|
|
|
- fix iprobe command
|
|
|
- eliminates use of global variables, plus dead code, cleanup.
|
|
|
|
|
|
* Add support for USB Mass Storage Devices (BBB)
|
|
|
(tested with USB memory sticks only)
|
|
|
|
|
|
* Avoid flicker on TRAB's VFD
|
|
|
|
|
|
* Add support for SK98xx driver
|
|
|
|
|
|
* Add PCI support for SL8245 board
|
|
|
|
|
|
* Support IceCube board configurations with 1 x AMD AM29LV065 (8 MB)
|
|
|
or 1 x AM29LV652 (two LV065 in one chip = 16 MB);
|
|
|
Run IPB at 133 Mhz; adjust the MII clock frequency accordingly
|
|
|
|
|
|
* Set BRG_CLK on PM825/826 to 64MHz (VCO_OUT / 4, instead of 16 MHz)
|
|
|
to allow for more accurate baudrate settings
|
|
|
(error now 0.7% at 115 kbps, instead of 3.5% before)
|
|
|
|
|
|
* Patch by Andreas Mohr, 4 Sep 2003:
|
|
|
Fix a lot of spelling errors
|
|
|
|
|
|
* Add support for PPChameleon Eval Board
|
|
|
|
|
|
* Add support for P3G4 board
|
|
|
|
|
|
* Fix problem with MGT5100 FEC driver: add "early" MAC address
|
|
|
initialization
|
|
|
|
|
|
* Patch by Yuli Barcohen, 7 Aug 2003:
|
|
|
check BCSR to detect if the board is configured in PCI mode
|
|
|
|
|
|
======================================================================
|
|
|
Changes for U-Boot 0.4.7:
|
|
|
======================================================================
|
|
|
|
|
|
* Patch by Raghu Krishnaprasad, 7 Aug 2003:
|
|
|
add support for Adder II MPC852T module
|
|
|
|
|
|
* Patch by George G. Davis, 19 Aug 2003:
|
|
|
fix TI Innovator/OMAP1510 pin configs
|
|
|
|
|
|
* Patches by Kshitij, 18 Aug 2003
|
|
|
- add support for arm926ejs cpu core
|
|
|
- add support for TI OMAP 1610 Innovator Board
|
|
|
|
|
|
* Patch by Yuli Barcohen, 14 Aug 2003:
|
|
|
add support for bzip2 uncompression
|
|
|
|
|
|
* Add GCC library to examples/Makefile so GCC utility functions will
|
|
|
be resolved, too
|
|
|
|
|
|
* Add I2C and RTC support for RMU board using software I2C driver
|
|
|
(because of better response to iprobe command); fix problem with
|
|
|
"reset" command
|
|
|
|
|
|
* Patch by Matthias Fuchs, 28 Aug 2003:
|
|
|
Added CONFIG_BOOTP_DNS2 and CONFIG_BOOTP_SEND_HOSTNAME to
|
|
|
CONFIG_BOOTP_MAKS (see README).
|
|
|
|
|
|
* Fix ICU862 environment problem
|
|
|
|
|
|
* Fix RAM size detection for RMU board
|
|
|
|
|
|
* Implement "reset" for MGT5100/MPC5200 systems
|
|
|
|
|
|
======================================================================
|
|
|
Changes for U-Boot 0.4.6:
|
|
|
======================================================================
|
|
|
|
|
|
* Make Ethernet autonegotiation on INCA-IP work for all clock rates;
|
|
|
allow selection of clock frequency as "make" target
|
|
|
|
|
|
* Implement memory autosizing code for IceCube boards
|
|
|
|
|
|
* Configure network port on INCA-IP for autonegotiation
|
|
|
|
|
|
* Fix overflow problem in network timeout code
|
|
|
|
|
|
* Patch by Richard Woodruff, 8 Aug 2003:
|
|
|
Allow crc32 to be used at address 0x000 (crc32_no_comp, too).
|
|
|
|
|
|
======================================================================
|
|
|
Changes for U-Boot 0.4.5:
|
|
|
======================================================================
|
|
|
|
|
|
* Update for TQM board defaults:
|
|
|
disable clocks_in_mhz, enable boot count limit
|
|
|
|
|
|
* Removed tools/gdb from "make all" target. Added make target "gdbtools"
|
|
|
in toplevel directory instead. Removed astest.c from tools/gdb because
|
|
|
it is no longer relevant.
|
|
|
|
|
|
* Fix PCI support for MPC5200 / IceCube Board
|
|
|
|
|
|
* Map ISP1362 USB OTG controller for NSCU board
|
|
|
|
|
|
* Patch by Brad Parker, 02 Aug 2003:
|
|
|
fix sc520_cdp problems
|
|
|
|
|
|
* Implement Boot Cycle Detection (Req. 2.3 of OSDL CGL Reqirements)
|
|
|
|
|
|
* Allow erase command to cross flash bank boundaries
|
|
|
|
|
|
* Patch by Scott McNutt, 21 Jul 2003:
|
|
|
Add support for LynuxWorks Kernel Downloadable Images (KDIs).
|
|
|
Both LynxOS and BlueCat linux KDIs are supported.
|
|
|
|
|
|
* Patch by Richard Woodruff, 25 Jul 2003:
|
|
|
use more reliable reset for OMAP/925T
|
|
|
|
|
|
* Patch by Nye Liu, 25 Jul 2003:
|
|
|
fix typo in mpc8xx.h
|
|
|
|
|
|
* Patch by Richard Woodruff, 24 Jul 2003:
|
|
|
Fixes for cmd_nand.c:
|
|
|
- Fixed null dereferece which could result in incorrect ECC values.
|
|
|
- Added support for devices with no Ready/Busy signal hooked up.
|
|
|
- Added OMAP1510 read/write protect handling.
|
|
|
- Fixed nand.h's ECCPOS. A conflict existed with POS5 and badblock
|
|
|
for non-JFFS2.
|
|
|
- Switched default ECC to be JFFS2.
|
|
|
|
|
|
* Allow crc32 to be used at address 0x000
|
|
|
|
|
|
* Provide consistent interface to standalone applications to access
|
|
|
the 'global_data' structure
|
|
|
Provide a doc/README.standalone more useful to users/developers.
|
|
|
|
|
|
* Make IceCube MGT5100 FEC driver work
|
|
|
|
|
|
* Implement new mechanism to export U-Boot's functions to standalone
|
|
|
applications: instead of using (PPC-specific) system calls we now
|
|
|
use a jump table; please see doc/README.standalone for details
|
|
|
|
|
|
* Patch by Dave Westwood, 24 Jul 2003:
|
|
|
added support for Unity OS (a proprietary OS)
|
|
|
|
|
|
* Patch by Detlev Zundel, 23 Jul 2003:
|
|
|
add "imls" command to print flash table of contents
|
|
|
|
|
|
* Fix cold boot detection for log buffer reset
|
|
|
|
|
|
* Return error for invalid length specifiers with "cp.X" etc.
|
|
|
|
|
|
* Fix startup problem on MIPS
|
|
|
|
|
|
* Allow for CONFIG_SPLASH_SCREEN even when no explicit
|
|
|
bitmap support is configured
|
|
|
|
|
|
* Patch by Bill Hargen, 18 Jul 2003:
|
|
|
- fix endinaness problem in cpu/mpc824x/drivers/i2c/i2c1.c
|
|
|
|
|
|
* Patch by Denis Peter, 18 Jul 2003:
|
|
|
- fix memory configuration for MIP405T
|
|
|
- fix printout of baudrate for "loadb <loadaddr> <baudrate>"
|
|
|
|
|
|
* Cleanup of TQM82xx configurations; use "official" board types
|
|
|
to make selection easier.
|
|
|
|
|
|
* Patch by Martin Krause, 17 Jul 2003:
|
|
|
add delay to get I2C working with "imm" command and s3c24x0_i2c.c
|
|
|
|
|
|
* Patch by Richard Woodruff, 17 July 03:
|
|
|
- Fixed bug in OMAP1510 baud rate divisor settings.
|
|
|
|
|
|
* Patch by Nye Liu, 16 July 2003:
|
|
|
MPC860FADS fixes:
|
|
|
- add MPC86xADS support (uses MPC86xADS.h)
|
|
|
- add 866P/T core support (also MPC859T/MPC859DSL/MPC852T)
|
|
|
o PLPRCR changes
|
|
|
o BRG changes (EXTAL/XTAL restricted to 10MHz)
|
|
|
o don't trust gclk() software measurement by default, depend on
|
|
|
CONFIG_8xx_GCLK_FREQ
|
|
|
- add DRAM SIMM not installed detection
|
|
|
- use more "correct" SDRAM initialization sequence
|
|
|
- allow different SDRAM sizes (8xxADS has 8M)
|
|
|
- default DER is 0
|
|
|
- remove unused MAMR defines from FADS860T.h (all done in fads.c)
|
|
|
- rename MAMR/MBMR defines to be more consistent. Should eventually
|
|
|
be merged into MxMR to better reflect the PowerQUICC datasheet.
|
|
|
|
|
|
* Patch by Yuli Barcohen, 16 Jul 2003:
|
|
|
support new Motorola PQ2FADS-ZU evaluation board which replaced
|
|
|
MPC8260ADS and MPC8266ADS
|
|
|
|
|
|
======================================================================
|
|
|
Changes for U-Boot 0.4.4:
|
|
|
======================================================================
|
|
|
|
|
|
* Add support for IceCube board (with MGT5100 and MPC5200 CPUs)
|
|
|
|
|
|
* Add support for MGT5100 and MPC5200 processors
|
|
|
|
|
|
* Patch by Lutz Dennig, 15 Jul 2003:
|
|
|
update for R360MPI board
|
|
|
|
|
|
======================================================================
|
|
|
Changes for U-Boot 0.4.3:
|
|
|
======================================================================
|
|
|
|
|
|
* Patches by Kshitij, 04 Jul 2003
|
|
|
- added support for arm925t cpu core
|
|
|
- added support for TI OMAP 1510 Innovator Board
|
|
|
|
|
|
* Patches by Martin Krause, 14 Jul 2003:
|
|
|
- add I2C support for s3c2400 systems (trab board)
|
|
|
- (re-) add "ping" to command table
|
|
|
|
|
|
* Fix handling of "slow" POST routines
|
|
|
|
|
|
* Patches by Yuli Barcohen, 13 Jul 2003:
|
|
|
- Correct flash and JFFS2 support for MPC8260ADS
|
|
|
- fix PVR values and clock generation for PowerQUICC II family
|
|
|
(8270/8275/8280)
|
|
|
|
|
|
* Patch by Bernhard Kuhn, 08 Jul 2003:
|
|
|
- add support for M68K targets
|
|
|
|
|
|
* Patch by Ken Chou, 3 Jul:
|
|
|
- Fix PCI config table for A3000
|
|
|
- Fix iobase for natsemi.c
|
|
|
(PCI_BASE_ADDRESS_0 is the IO base register for DP83815)
|
|
|
|
|
|
* Allow to enable "slow" POST routines by key press on power-on
|
|
|
* Fix temperature dependend switching of LCD backlight on LWMON
|
|
|
* Tweak output format for LWMON
|
|
|
|
|
|
* Patch by Stefan Roese, 11 Jul 2003:
|
|
|
- Fix bug in CONFIG_VERSION_VARIABLE.
|
|
|
- AR405 config updated.
|
|
|
- OCRTC/ORSG: bsp command added.
|
|
|
- ASH405 bsp update.
|
|
|
|
|
|
======================================================================
|
|
|
Changes for U-Boot 0.4.2:
|
|
|
======================================================================
|
|
|
|
|
|
* Add support for NSCU board
|
|
|
|
|
|
* Add support for TQM823M, TQM850M, TQM855M and TQM860M modules
|
|
|
|
|
|
* Add support for Am29LV160ML, Am29LV320ML, and Am29LV640ML
|
|
|
mirror bit flash on TQM8xxM modules
|
|
|
|
|
|
* Patch by Kenneth Johansson, 30 Jun 2003:
|
|
|
get rid of MK_CMD_ENTRY macro; update doc/README.command
|
|
|
|
|
|
* Patch by Seb James, 30 Jun 2003:
|
|
|
Improve documentation of I2C configuration in README
|
|
|
|
|
|
* Fix problems with previous log buffer "fixes"
|
|
|
|
|
|
* Fix minor help text issues
|
|
|
|
|
|
* "log append" did not append a newline
|
|
|
|
|
|
======================================================================
|
|
|
Changes for U-Boot 0.4.1:
|
|
|
======================================================================
|
|
|
|
|
|
* Fix some missing commands, cleanup header files
|
|
|
(autoscript, bmp, bsp, fat, mmc, nand, portio, ...)
|
|
|
|
|
|
* Rewrite command lookup and help command (fix problems with bubble
|
|
|
sort when sorting command name list). Minor cleanup here and there.
|
|
|
|
|
|
* Merge from "stable branch", tag LABEL_2003_06_28_1800-stable:
|
|
|
- Allow to call sysmon function interactively
|
|
|
- PIC on LWMON board needs delay after power-on
|
|
|
- Add missing RSR definitions for MPC8xx
|
|
|
- Improve log buffer handling: guarantee clean reset after power-on
|
|
|
- Add support for EXBITGEN board (aka "genie")
|
|
|
- Add support for SL8245 board
|
|
|
|
|
|
* Code cleanup:
|
|
|
- remove trailing white space, trailing empty lines, C++ comments, etc.
|
|
|
- split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)
|
|
|
|
|
|
* Patches by Kenneth Johansson, 25 Jun 2003:
|
|
|
- major rework of command structure
|
|
|
(work done mostly by Michal Cendrowski and Joakim Kristiansen)
|
|
|
|
|
|
======================================================================
|
|
|
Changes for U-Boot 0.4.0:
|
|
|
======================================================================
|
|
|
|
|
|
* Patches by Robert Schwebel, 26 Jun 2003:
|
|
|
- csb226 configuration updated
|
|
|
- credits for logodl port updated
|
|
|
- innokom configuration updated
|
|
|
- logodl tree update, still with coding style inconsistencies
|
|
|
- added OCM for ppc405 warning to README
|
|
|
|
|
|
* Patch by Pantelis Antoniou, 25 Jun 2003:
|
|
|
update NetVia with V2 board support
|
|
|
|
|
|
* Header file cleanup for ARM
|
|
|
|
|
|
* Patch by Murray Jensen, 24 Jun 2003:
|
|
|
- make sure to use only U-boot provided header files
|
|
|
- fix problems with ".rodata.str1.4" section as used by GCC-3.x
|
|
|
|
|
|
* Patch by Stefan Roese, 24 Jun 2003:
|
|
|
- Update esd ASH405 board files.
|
|
|
- Update esd DASA_SIM config file.
|
|
|
- Add ping command to some esd boards.
|
|
|
|
|
|
* Patch by Yuli Barcohen, 23 Jun 2003:
|
|
|
Update for MPC8260ADS board
|
|
|
|
|
|
* Patch by Murray Jensen, 23 Jun 2003:
|
|
|
- cleanup of GCC 3.x compiler warnings
|
|
|
|
|
|
* Patch by Rune Torgersen, 4 Jun 2003:
|
|
|
add large memory support for MPC8266ADS board
|
|
|
|
|
|
* Patch by Richard Woodruff, 19 June 03:
|
|
|
- Enabled standard u-boot device abstraction for ARM
|
|
|
- Enabled console device for ARM
|
|
|
- Initilized bi_baudrate for ARM
|
|
|
|
|
|
* Patch by Bill Hargen, 23 Apr 2003:
|
|
|
fix byte order for 824x I2C addresses (write op)
|
|
|
|
|
|
* Patch by Murray Jensen, 20 Jun 2003:
|
|
|
- hymod update
|
|
|
- cleanup (especially for gcc-3.x compilers)
|
|
|
|
|
|
* Patch by Tom Guilliams, 20 Jun 2003:
|
|
|
added CONFIG_750FX support for IBM 750FX processors
|
|
|
|
|
|
* Patch by Devin Crumb, 02 Apr 2003:
|
|
|
Fix clock divider rounding problem in drivers/serial.c
|
|
|
|
|
|
* Patch by Richard Woodruff, 19 June 03:
|
|
|
- Fixed smc91c111 driver to sync with the u-boot environment
|
|
|
(driver/smc91c111.c).
|
|
|
- Added eth_init error return check in NetLoop (net/net.c).
|
|
|
|
|
|
* Patch by Ken Chou, 19 June 2003:
|
|
|
Added support for A3000 SBC board (Artis Microsystems Inc.)
|
|
|
|
|
|
* Patches by Murray Jensen, 17 Jun 2003:
|
|
|
- Hymod board database mods: add "who" field and new xilinx chip types
|
|
|
- provide new "init_cmd_timeout()" function so code external to
|
|
|
"common/main.c" can use the "reset_cmd_timeout()" function before
|
|
|
entering the main loop
|
|
|
- add DTT support for adm1021 (new file dtt/adm1021.c; config
|
|
|
slightly different. see include/configs/hymod.h for an example
|
|
|
(requires CONFIG_DTT_ADM1021, CONFIG_DTT_SENSORS, and
|
|
|
CFG_DTT_ADM1021 defined)
|
|
|
- add new "eeprom_probe()" function which has similar args and
|
|
|
behaves in a similar way to "eeprom_read()" etc.
|
|
|
- add 8260 FCC ethernet loopback code (new "eth_loopback_test()"
|
|
|
function which is enabled by defining CONFIG_ETHER_LOOPBACK_TEST)
|
|
|
- gdbtools copyright update
|
|
|
- ensure that set_msr() executes the "sync" and "isync" instructions
|
|
|
after the "mtmsr" instruction in cpu/mpc8260/interrupts.c
|
|
|
- 8260 I/O ports fix: Open Drain should be set last when configuring
|
|
|
- add SIU IRQ defines for 8260
|
|
|
- allow LDSCRIPT override and OBJCFLAGS initialization: change to
|
|
|
config.mk to allow board configurations to override the GNU
|
|
|
linker script, selected via the LDSCRIPT, make variable, and to
|
|
|
give an initial value to the OBJCFLAGS make variable
|
|
|
- 8260 i2c enhancement:
|
|
|
o correctly extends the timeout depending on the size of all
|
|
|
queued messages for both transmit and receive
|
|
|
o will not continue with receive if transmit times out
|
|
|
o ensures that the error callback is done for all queued tx
|
|
|
and rx messages
|
|
|
o correctly detects both tx and rx timeouts, only delivers one to
|
|
|
the callback, and does not overwrite an earlier error
|
|
|
o logic in i2c_probe now correct
|
|
|
- add "vprintf()" function so that "panic()" function can be
|
|
|
technically correct
|
|
|
- many Hymod board changes
|
|
|
|
|
|
* Patches by Robert Schwebel, 14 Jun 2003:
|
|
|
- add support for Logotronic DL datalogger board
|
|
|
- cleanup serial line after kermit binary download
|
|
|
- add debugX macro (debug level support)
|
|
|
- update mach-types.h to latest arm.linux.org.uk master list.
|
|
|
|
|
|
* Patches by David M<EFBFBD>ller, 12 Jun 2003:
|
|
|
- rewrite of the S3C24X0 register definitions stuff
|
|
|
- "driver" for the built-in S3C24X0 RTC
|
|
|
|
|
|
* Patches by Yuli Barcohen, 12 Jun 2003:
|
|
|
- Add MII support and Ethernet PHY initialization for MPC8260ADS board
|
|
|
- Fix incorrect SIUMCR initialisation caused by wrong Hard Reset
|
|
|
configuration word supplied by FPGA on some MPC8260ADS boards
|
|
|
|
|
|
* Patch by Pantelis Antoniou, 10 Jun 2003:
|
|
|
Unify status LED interface
|
|
|
|
|
|
* Add support for DS12887 RTC; add RTC support for ATC board
|
|
|
|
|
|
* Patch by Nicolas Lacressonniere, 11 Jun 2003:
|
|
|
Modifications for Atmel AT91RM9200DK ARM920T based development kit
|
|
|
- Add Atmel DataFlash support for reading and writing.
|
|
|
- Add possibility to boot a Linux from DataFlash with BOOTM command.
|
|
|
- Add Flash detection on Atmel AT91RM9200DK
|
|
|
(between Atmel AT49BV1614 and AT49BV1614A flashes)
|
|
|
- Replace old Ethernet PHY layer functions
|
|
|
- Change link address
|
|
|
|
|
|
* Patch by Frank Smith, 9 Jun 2003:
|
|
|
use CRIT_EXCEPTION for machine check on 4xx
|
|
|
|
|
|
* Patch by Detlev Zundel, 13 Jun 2003:
|
|
|
added implementation of the "carinfo" command in cmd_immap.c
|
|
|
|
|
|
* Fix CONFIG_NET_MULTI support in include/net.h
|
|
|
|
|
|
* Patches by Kyle Harris, 13 Mar 2003:
|
|
|
- Add FAT partition support
|
|
|
- Add command support for FAT
|
|
|
- Add command support for MMC
|
|
|
----
|
|
|
- Add Intel PXA support for video
|
|
|
- Add Intel PXA support for MMC
|
|
|
----
|
|
|
- Enable MMC and FAT for lubbock board
|
|
|
- Other misc changes for lubbock board
|
|
|
|
|
|
* Patch by Robert Schwebel, April 02, 2003:
|
|
|
fix for SMSC91111 driver
|
|
|
|
|
|
* Patch by Vladimir Gurevich, 04 Jun 2003:
|
|
|
make ppc405 ethernet driver compatible with CONFIG_NET_MULTI option
|
|
|
|
|
|
* Patch by Stefan Roese, 05 Jun 2003:
|
|
|
- PPC4xx: Fix bug for initial stack in data cache as pointed out by
|
|
|
Thomas Schaefer (tschaefer@giga-stream.de). Now inital stack in
|
|
|
data cache can be used even if the chip select is in use.
|
|
|
- CFG_RX_ETH_BUFFER added to set the ethernet receive buffer count
|
|
|
(see README for further description).
|
|
|
- Changed config files of CONFIG_EEPRO100 boards to use the
|
|
|
CFG_RX_ETH_BUFFER define.
|
|
|
|
|
|
* Add support for RMU board
|
|
|
|
|
|
* Add support for TQM862L at 100/50 MHz
|
|
|
|
|
|
* Patch by Pantelis Antoniou, 02 Jun 2003:
|
|
|
major reconstruction of networking code;
|
|
|
add "ping" support (outgoing only!)
|
|
|
|
|
|
* Patch by Denis Peter, 04 June 2003:
|
|
|
add support for the MIP405T board
|
|
|
|
|
|
* Patches by Udi Finkelstein, 2 June 2003:
|
|
|
- Added support for custom keyboards, initialized by defining a
|
|
|
board-specific drv_keyboard_init as well as defining CONFIG_KEYBOARD .
|
|
|
- Added support for the RBC823 board.
|
|
|
- cpu/mpc8xx/lcd.c now automatically calculates the
|
|
|
Horizontal Pixel Count field.
|
|
|
|
|
|
* Fix alignment problem in BOOTP (dhcp_leasetime option)
|
|
|
[pointed out by Nicolas Lacressonni<EFBFBD>re, 2 Jun 2003]
|
|
|
|
|
|
* Patch by Mark Rakes, 14 May 2003:
|
|
|
add support for Intel e1000 gig cards.
|
|
|
|
|
|
* Patch by Nye Liu, 3 Jun 2003:
|
|
|
fix critical typo in MAMR definition (include/mpc8xx.h)
|
|
|
|
|
|
* Fix requirement to align U-Boot image on 16 kB boundaries on PPC.
|
|
|
|
|
|
* Patch by Klaus Heydeck, 2 Jun 2003
|
|
|
Minor changes for KUP4K configuration
|
|
|
|
|
|
* Patch by Marc Singer, 29 May 2003:
|
|
|
Fixed rarp boot method for IA32 and other little-endian CPUs.
|
|
|
|
|
|
* Patch by Marc Singer, 28 May 2003:
|
|
|
Added port I/O commands.
|
|
|
|
|
|
* Patch by Matthew McClintock, 28 May 2003
|
|
|
- cpu/mpc824x/start.S: fix relocation code when booting from RAM
|
|
|
- minor patches for utx8245
|
|
|
|
|
|
* Patch by Daniel Engstr<EFBFBD>m, 28 May 2003:
|
|
|
x86 update
|
|
|
|
|
|
* Patch by Dave Ellis, 9 May 2003 + 27 May 2003:
|
|
|
add nand flash support to SXNI855T configuration
|
|
|
fix/extend nand flash support:
|
|
|
- fix 'nand erase' command so does not erase bad blocks
|
|
|
- fix 'nand write' command so does not write to bad blocks
|
|
|
- fix nand_probe() so handles no flash detected properly
|
|
|
- add doc/README.nand
|
|
|
- add .jffs2 and .oob options to nand read/write
|
|
|
- add 'nand bad' command to list bad blocks
|
|
|
- add 'clean' option to 'nand erase' to write JFFS2 clean markers
|
|
|
- make NAND read/write faster
|
|
|
|
|
|
* Patch by Rune Torgersen, 23 May 2003:
|
|
|
Update for MPC8266ADS board
|
|
|
|
|
|
* Get (mostly) rid of CFG_MONITOR_LEN definition; compute real length
|
|
|
instead CFG_MONITOR_LEN is now only used to determine _at_compile_
|
|
|
_time_ (!) if the environment is embedded within the U-Boot image,
|
|
|
or in a separate flash sector.
|
|
|
|
|
|
* Cleanup CFG_DER #defines in config files (wd maintained only)
|
|
|
|
|
|
* Fix data abort exception handling for arm920t CPU
|
|
|
|
|
|
* Fix alignment problems with flash driver for TRAB board
|
|
|
|
|
|
* Patch by Donald White, 21 May 2003:
|
|
|
fix calculation of base address in pci_hose_config_device()
|
|
|
|
|
|
* Fix bug in command line parsing: "cmd1;cmd2" is supposed to always
|
|
|
execute "cmd2", even if "cmd1" fails. Note that this is different
|
|
|
to "run var1 var2" where the contents of "var2" will NOT be
|
|
|
executed when a command in "var1" fails.
|
|
|
|
|
|
* Add zero-copy ramdisk support (requires corresponding kernel support!)
|
|
|
|
|
|
* Patch by Kyle Harris, 20 May 2003:
|
|
|
In preparation for an ixp port, rename cpu/xscale and arch-xscale
|
|
|
into cpu/pxa and arch-pxa.
|
|
|
|
|
|
* Patch by Stefan Roese, 23 May 2003:
|
|
|
- IBM PPC405EP port added.
|
|
|
- CONFIG_UART1_CONSOLE added. If defined internal UART1 (and not
|
|
|
UART0) is used as default U-Boot console. PPC4xx only!
|
|
|
- esd ASH405 board added (PPC405EP based).
|
|
|
- BUBINGA405EP board added (PPC405EP based - IBM Eval Board).
|
|
|
- esd CPCI405AB board added.
|
|
|
- esd PMC405 board added.
|
|
|
- Update of some esd boards.
|
|
|
|
|
|
* Patch by Denis Peter, 19 Mai 2003:
|
|
|
add support for the MIP405-3 board
|
|
|
|
|
|
* Patch by Dave Ellis, 22 May 2003:
|
|
|
Fix problem with only partially cleared .bss segment
|
|
|
|
|
|
* Patch by Rune Torgersen, 12 May 2003:
|
|
|
get PCI to work on a MPC8266ADS board; incorporate change to
|
|
|
cpu/mpc8260/pci.c to enable overrides of PCI memory parameters
|
|
|
|
|
|
* Patch by Nye Liu, 1 May 2003:
|
|
|
minor patches for the FADS8xx
|
|
|
|
|
|
* Patch by Thomas Sch<EFBFBD>fer, 28 Apr 2003:
|
|
|
Fix SPD handling for 256 ECC DIMM on Walnut
|
|
|
|
|
|
* Add support for arbitrary bitmaps for TRAB's VFD command;
|
|
|
allow to pass boot bitmap addresses in environment variables;
|
|
|
allow for zero boot delay
|
|
|
|
|
|
* Patch by Christian Gei<EFBFBD>inger, 19 May 2002:
|
|
|
On TRAB: wait until the dummy byte has been completely sent
|
|
|
|
|
|
* Patch by David Updegraff, 22 Apr 2003:
|
|
|
update for CrayL1 board
|
|
|
|
|
|
* Patch by Pantelis Antoniou, 21 Apr 2003:
|
|
|
add boot support for ARTOS (a proprietary OS)
|
|
|
|
|
|
* Patch by Steven Scholz, 11 Apr 2003:
|
|
|
Add support for RTC DS1338
|
|
|
|
|
|
* Patch by Rod Boyce, 24 Jan 2003:
|
|
|
Fix counting of extended partitions in diskboot command
|
|
|
|
|
|
* Patch by Christophe Lindheimer, 20 May 2003:
|
|
|
allow the use of CFG_LOADS when CFG_NO_FLASH is set
|
|
|
|
|
|
* Fix SDRAM timing on Purple board
|
|
|
|
|
|
* Add support for CompactFlash on ATC board
|
|
|
(includes support for Intel 82365 and compatible PC Card controllers,
|
|
|
and Yenta-compatible PCI-to-CardBus controllers)
|
|
|
|
|
|
* Patch by Mathijs Haarman, 08 May 2003:
|
|
|
Add lan91c96 driver (tested on Lubbock and custom PXA250 board only)
|
|
|
|
|
|
* Fix problem with usage of "true" (undefined in current versions of bfd.h)
|
|
|
|
|
|
* Add support for Promess ATC board
|
|
|
|
|
|
* Patch by Keith Outwater, 28 Apr 2003:
|
|
|
- Miscellaneous corrections and additions to GEN860T board specific code.
|
|
|
- Added GEN860_SC variant to GEN860T.
|
|
|
- Miscellaneous corrections to GEN860T documentation.
|
|
|
- Correct duplicate entry in U-Boot CREDITS file.
|
|
|
- Add GEN860T_SC entry in MAINTAINERS file.
|
|
|
- Update CREDITS file with GEN860T_SC info.
|
|
|
|
|
|
* Update Smiths Aerospace addresses in MAINTAINERS file
|
|
|
|
|
|
* Fix error handling in hush's version of "run" command
|
|
|
|
|
|
* LWMON extensions:
|
|
|
- Splashscreen support
|
|
|
- modem support
|
|
|
- sysmon support
|
|
|
- temperature dependend enabling of LCD
|
|
|
|
|
|
* Allow booting from old "PPCBoot" disk partitions
|
|
|
|
|
|
* Add support for TQM8255 Board / MPC8255 CPU
|
|
|
|
|
|
======================================================================
|
|
|
Changes for U-Boot 0.3.1:
|
|
|
======================================================================
|
|
|
|
|
|
* Make sure Block Lock Bits get cleared in R360MPI flash driver
|
|
|
|
|
|
* MPC823 LCD driver: Fill color map backwards, to allow for steady
|
|
|
display when Linux takes over
|
|
|
|
|
|
* Patch by Erwin Rol, 27 Feb 2003:
|
|
|
Add support for RTEMS (this time for real).
|
|
|
|
|
|
* Add support for "bmp info" and "bmp display" commands to load
|
|
|
bitmap images; this can be used (for example in a "preboot"
|
|
|
command) to display a splash screen very quickly after poweron.
|
|
|
|
|
|
* Add support for 133 MHz clock on INCA-IP board
|
|
|
|
|
|
* Patch by Lutz Dennig, 10 Apr 2003:
|
|
|
Update for R360MPI board
|
|
|
|
|
|
* Add new meaning to "autostart" environment variable:
|
|
|
If set to "no", a standalone image passed to the
|
|
|
"bootm" command will be copied to the load address
|
|
|
(and eventually uncompressed), but NOT be started.
|
|
|
This can be used to load and uncompress arbitrary
|
|
|
data.
|
|
|
|
|
|
* Patch by Stefan Roese, 10 Apr 2003:
|
|
|
Changed DHCP client to use IP address from server option field #54
|
|
|
from the OFFER packet in the server option field #54 in the REQUEST
|
|
|
packet. This fixes a problem using a Windows 2000 DHCP server,
|
|
|
where the DHCP-server is not the TFTP-server.
|
|
|
|
|
|
* Set max brightness for MN11236 displays on TRAB board
|
|
|
|
|
|
* Add support for TQM862L modules
|
|
|
|
|
|
======================================================================
|
|
|
Changes for U-Boot 0.3.0:
|
|
|
======================================================================
|
|
|
|
|
|
* Patch by Arun Dharankar, 4 Apr 2003:
|
|
|
Add IDMA example code (tested on 8260 only)
|
|
|
|
|
|
* Add support for Purple Board (MIPS64 5Kc)
|
|
|
|
|
|
* Add support for MIPS64 5Kc CPUs
|
|
|
|
|
|
* Fix missing setting of "loadaddr" and "bootfile" on ARM and MIPS
|
|
|
|
|
|
* Patch by Denis Peter, 04 Apr 2003:
|
|
|
- update MIP405-4 board
|
|
|
|
|
|
* Patch by Stefan Roese, 4 Apr 2003:
|
|
|
- U-Boot version environment variable "ver" added
|
|
|
(CONFIG_VERSION_VARIABLE).
|
|
|
- Changed PPC405GPr version from A to B.
|
|
|
- Changed CPCI405 to use CTS instead of DSR on PPC405 UART1.
|
|
|
|
|
|
* Patches by Denis Peter, 03 April 2003:
|
|
|
- fix PCI IRQs on MPL boards
|
|
|
- fix two more un-relocated pointer problems
|
|
|
|
|
|
* Fix behaviour of "run" command:
|
|
|
- print error message iv variable does not exist
|
|
|
- terminate processing of arguments in case of error
|
|
|
|
|
|
* Patches by Peter Figuli, 10 Mar 2003
|
|
|
- Add support for BTUART on PXA platform
|
|
|
- Add support for WEP EP250 (PXA) board
|
|
|
|
|
|
* Fix flash problems on INCA-IP; add tool to allow bruning images to
|
|
|
flash using a BDI2000
|
|
|
|
|
|
* Implement fix for I2C Edge Conditions problem for all boards that
|
|
|
use the bit-banging driver (common/soft_i2c.c)
|
|
|
|
|
|
* Patch by Martin Winistoerfer, 23 Mar 2003
|
|
|
- Add port to MPC555/556 microcontrollers
|
|
|
- Add support for cmi customer board with
|
|
|
Intel 28F128J3A, 28F320J3A or 28F640J3A flash.
|
|
|
|
|
|
* Patch by Rick Bronson, 28 Mar 2003:
|
|
|
- fix common/cmd_nand.c
|
|
|
|
|
|
* Patch by Arun Dharankar, 24 Mar 2003:
|
|
|
- add threads / scheduler example code
|
|
|
|
|
|
* Add patches by Robert Schwebel, 31 Mar 2003:
|
|
|
- add ctrl-c support for kermit download
|
|
|
- align bdinfo output on ARM
|
|
|
- csb226 board: bring in sync with innokom/memsetup.S
|
|
|
- csb226 board: fix MDREFR handling
|
|
|
- misc doc fixes / extensions
|
|
|
- innokom board: cleanup, MDREFR fix in memsetup.S, config update
|
|
|
- add BOOT_PROGRESS to armlinux.c
|
|
|
|
|
|
* Add CPU ID, version, and clock speed for INCA-IP
|
|
|
|
|
|
* Patches by Dave Ellis, 18 Mar 2003 for SXNI855T board:
|
|
|
- fix SRAM and SDRAM memory sizing
|
|
|
- add status LED support
|
|
|
- add MAC address for second (SCC1) ethernet port
|
|
|
|
|
|
* Update default environment for TQM8260 board
|
|
|
|
|
|
* Patch by Rick Bronson, 16 Mar 2003:
|
|
|
- Add NAND flash support for reading, writing, and erasing NAND
|
|
|
flash (certain forms of which are called SmartMedia).
|
|
|
- Add support for Atmel AT91RM9200DK ARM920T based development kit.
|
|
|
|
|
|
* Patches by Robert Schwebel, 19 Mar 2003:
|
|
|
- use arm-linux-gcc as default compiler for ARM
|
|
|
- fix i2c fixup code
|
|
|
- fix missing baudrate setting
|
|
|
- added $loadaddr / CFG_LOAD_ADDR support to loadb
|
|
|
- moved "ignoring trailing characters" _before_ u-boot wants to
|
|
|
print out diagnostics messages; removes bogus characters at the
|
|
|
end of transmission
|
|
|
|
|
|
* Patch by John Zhan, 18 Mar 2003:
|
|
|
Add support for SinoVee Microsystems SC8xx boards
|
|
|
|
|
|
* Patch by Rolf Offermanns, 21 Mar 2003:
|
|
|
ported the dnp1110 related changes from the current armboot cvs to
|
|
|
current u-boot cvs. smc91111 does not work. problem marked in
|
|
|
smc91111.c, grep for "FIXME".
|
|
|
|
|
|
* Patch by Brian Auld, 25 Mar 2003:
|
|
|
Add support for STM flash chips on ebony board
|
|
|
|
|
|
* Add PCI support for MPC8250 Boards (PM825 module)
|
|
|
|
|
|
* Patch by Stefan Roese, 25 Mar 2003:
|
|
|
- PCI405 update.
|
|
|
|
|
|
* Patch by Stefan Roese, 20 Mar 2003:
|
|
|
- CPCI4052 update (support for revision 3).
|
|
|
- Set edge conditioning circuitry on PPC405GPr for compatibility
|
|
|
to existing PPC405GP designs.
|
|
|
- Clip udiv to 5 bits on PPC405 (serial.c).
|
|
|
|
|
|
* Extend INCAIP board support:
|
|
|
- add automatic RAM size detection
|
|
|
- add "bdinfo" command
|
|
|
- pass flash address and size to Linux kernel
|
|
|
- switch to 150 MHz clock
|
|
|
|
|
|
* Avoid flicker on the TRAB's VFD by synchronizing the enable with
|
|
|
the HSYNC/VSYNC. Requires new CPLD code (Version 101 for Rev. 100
|
|
|
boards, version 153 for Rev. 200 boards).
|
|
|
|
|
|
* Patch by Vladimir Gurevich, 12 Mar 2003:
|
|
|
Fix relocation problem of statically initialized string pointers
|
|
|
in common/cmd_pci.c
|
|
|
|
|
|
* Patch by Kai-Uwe Bl<EFBFBD>m, 12 Mar 2003:
|
|
|
Cleanup & bug fixes for JFFS2 code:
|
|
|
- the memory mangement was broken. It caused havoc on malloc by
|
|
|
writing beyond the block boundaries.
|
|
|
- the length calculation for files was wrong, sometimes resulting
|
|
|
in short file reads.
|
|
|
- data copying now optionally takes fragment version numbers into
|
|
|
account, to avoid copying from older data.
|
|
|
See doc/README.JFFS2 for details.
|
|
|
|
|
|
* Patch by Josef Wagner, 12 Mar 2003:
|
|
|
- 16/32 MB and 50/80 MHz support with auto-detection for IP860
|
|
|
- ETH05 and BEDBUG support for CU824
|
|
|
- added support for MicroSys CPC45
|
|
|
- new BOOTROM/FLASH0 and DOC base for PM826
|
|
|
|
|
|
* Patch by Robert Schwebel, 12 Mar 2003:
|
|
|
Fix the chpart command on innokom board
|
|
|
|
|
|
* Name cleanup:
|
|
|
mv include/asm-i386/ppcboot-i386.h include/asm-i386/u-boot-i386.h
|
|
|
s/PPCBoot/U-Boot/ in some files
|
|
|
s/pImage/uImage/ in some files
|
|
|
|
|
|
* Patch by Detlev Zundel, 15 Jan 2003:
|
|
|
Fix '' command line quoting
|
|
|
|
|
|
* Patch by The LEOX team, 19 Jan 2003:
|
|
|
- add support for the ELPT860 board
|
|
|
- add support for Dallas ds164x RTC
|
|
|
|
|
|
* Patches by David M<EFBFBD>ller, 31 Jan 2003:
|
|
|
- minimal setup for CardBus bridges
|
|
|
- add EEPROM read/write support in the CS8900 driver
|
|
|
- add support for the builtin I2C controller in the Samsung s3c24x0 chips
|
|
|
- add support for MPL's VCMA9 (Samsung s3c2410 based) board
|
|
|
|
|
|
* Patch by Steven Scholz, 04 Feb 2003:
|
|
|
add support for RTC DS1307
|
|
|
|
|
|
* Patch by Reinhard Meyer, 5 Feb 2003:
|
|
|
fix PLPRCR/SCCR init sequence on 8xx to allow for
|
|
|
changes of EBDF by software
|
|
|
|
|
|
* Patch by Vladimir Gurevich, 07 Feb 2003:
|
|
|
"API-compatibility patch" for 4xx I2C driver
|
|
|
|
|
|
* TRAB fixes / extensions:
|
|
|
- Restore VFD brightness as saved in environment
|
|
|
- add support for Fujitsu flashes
|
|
|
- make sure both buzzers are turned off (drive low level)
|
|
|
|
|
|
* Patches by Robert Schwebel, 06 Mar 2003:
|
|
|
- fix bug in BOOTP code (must use NetCopyIP)
|
|
|
- update of CSB226 port
|
|
|
- clear BSS segment on XScale
|
|
|
- added support for i2c_init_board() function
|
|
|
- update to the Innokom plattform
|
|
|
|
|
|
* Extend support for redundand environments for configurations where
|
|
|
environment size < sector size
|
|
|
|
|
|
* Patch by Rune Torgersen, 13 Feb 2003:
|
|
|
Add support for Motorola MPC8266ADS board
|
|
|
|
|
|
* Patch by Kyle Harris, 19 Feb 2003:
|
|
|
patches for the Intel lubbock board:
|
|
|
memsetup.S - general cleanup (based on Robert's csb226 code)
|
|
|
flash.c - overhaul, actually works now
|
|
|
lubbock.c - fix init funcs to return proper value
|
|
|
|
|
|
* Patch by Kenneth Johansson, 26 Feb 2003:
|
|
|
- Fixed off by one in RFTA calculation.
|
|
|
- No need to abort when LDF is lower than we can program it's only
|
|
|
minimum timing so clamp it to what we can do.
|
|
|
- Takes function pointer to function for reading the spd_nvram. Usefull
|
|
|
for faking data or hardcode a module without the nvram.
|
|
|
- fix other user for above change
|
|
|
- fix some comments.
|
|
|
|
|
|
* Patches by Brian Waite, 26 Feb 2003:
|
|
|
- fix port for evb64260 board
|
|
|
- fix PCI for evb64260 board
|
|
|
- fix PCI scan
|
|
|
|
|
|
* Patch by Reinhard Meyer, 1 Mar 2003:
|
|
|
Add support for EMK TOP860 Module
|
|
|
|
|
|
* Patch by Yuli Barcohen, 02 Mar 2003:
|
|
|
Add SPD EEPROM support for MPC8260ADS board
|
|
|
|
|
|
* Patch by Robert Schwebel, 21 Jan 2003:
|
|
|
- Add support for Innokom board
|
|
|
- Don't complain if "install" fails
|
|
|
- README cleanup (remove duplicated lines)
|
|
|
- Update PXA header files
|
|
|
|
|
|
* Add documentation for existing POST code (doc/README.POST)
|
|
|
|
|
|
* Patch by Laudney Ren, 15 Jan 2003:
|
|
|
Fix handling of redundand environment in "tools/envcrc.c"
|
|
|
|
|
|
* Patch by Detlev Zundel, 28 Feb 2003:
|
|
|
Add bedbug support for 824x systems
|
|
|
|
|
|
* Add support for 16 MB flash configuration of TRAB board
|
|
|
|
|
|
* Patch by Erwin Rol, 27 Feb 2003:
|
|
|
Add support for RTEMS
|
|
|
|
|
|
* Add image information to README
|
|
|
|
|
|
* Patch by Stefan Roese, 18 Feb 2003:
|
|
|
CPCIISER4 configuration updated.
|
|
|
|
|
|
* Patch by Stefan Roese, 17 Feb 2003:
|
|
|
Fixed bug in ext. serial clock setup on PPC405 (since PPC440 port).
|
|
|
|
|
|
* Patch by Stefan Roese, 13 Feb 2003:
|
|
|
Add "pcidelay" environment variable (in ms, enabled via
|
|
|
CONFIG_PCI_BOOTDELAY).
|
|
|
PCI spec 2.2 defines, that a pci target has 2^25 pci clocks after
|
|
|
RST# to respond to configuration cycles (33MHz -> 1s).
|
|
|
|
|
|
* Fix dual PCMCIA slot support (when running with just one
|
|
|
slot populated)
|
|
|
|
|
|
* Add VFD type detection to trab board
|
|
|
|
|
|
* extend drivers/cs8900.c driver to synchronize ethaddr environment
|
|
|
variable with value in the EEPROM
|
|
|
|
|
|
* Patch by Stefan Roese, 10 Feb 2003:
|
|
|
Add support for 4MB and 128MB onboard SDRAM (cpu/ppc4xx/sdram.c)
|
|
|
|
|
|
* Add support for MIPS32 4Kc CPUs
|
|
|
|
|
|
* Add support for INCA-IP Board
|
|
|
|
|
|
======================================================================
|
|
|
Changes for U-Boot 0.2.2:
|
|
|
======================================================================
|
|
|
|
|
|
* Add dual ethernet support on PM826
|
|
|
|
|
|
* Add support for LXT971 PHY on PM826
|
|
|
|
|
|
* Patch by Tord Andersson, 16 Jan 2003:
|
|
|
Fix flash sector count for TQM8xxL
|
|
|
|
|
|
* Fix I2C EEPROM problem on ICU862 board (would only write the first
|
|
|
16 bytes out of each 32 byte block)
|
|
|
|
|
|
======================================================================
|
|
|
Changes for U-Boot 0.2.1:
|
|
|
======================================================================
|
|
|
|
|
|
* Add support for V37 board
|
|
|
(patch by J<EFBFBD>n Benediktsson, 11 Dec 2002)
|
|
|
|
|
|
* Update baudrate in bd_info when it gets changed
|
|
|
|
|
|
* Add watchdog trigger points while waiting for serial port
|
|
|
(so far only 8xx -- needed on LWMON with 100ms watchdog)
|
|
|
|
|
|
* Improve command line tool to access the U-Boot's environment
|
|
|
(figuration of the utility, using a config file)
|
|
|
|
|
|
* Add single quote support for (old) command line parser
|
|
|
|
|
|
* Switch LWMON board default config from FRAM to EEPROM;
|
|
|
in POST, EEPROM shows up on 8 addresses
|
|
|
|
|
|
======================================================================
|
|
|
Changes for U-Boot 0.2.0:
|
|
|
======================================================================
|
|
|
|
|
|
* Use 1-byte-read instead of -write for iprobe() function
|
|
|
Add i2c commands to PM826 config
|
|
|
|
|
|
* extend I2C POST code: check for list on known addresses
|
|
|
|
|
|
* Improve log buffer code; use "loglevel" to decide which messages
|
|
|
to log on the console, too (like in Linux); get rid of "logstart"
|
|
|
|
|
|
* Add command line tool to access the U-Boot's environment
|
|
|
(board-specific for TRAB now, to be fixed later)
|
|
|
|
|
|
* Patch by Hans-Joerg Frieden, 06 Dec 2002
|
|
|
Fix misc problems with AmigaOne support
|
|
|
|
|
|
* Patch by Chris Hallinan, 3 Dec 2002:
|
|
|
minor cleanup to the MPC8245 EPIC driver
|
|
|
|
|
|
* Patch by Pierre Aubert , 28 Nov 2002
|
|
|
Add support for external (SIU) interrupts on MPC8xx
|
|
|
|
|
|
* Patch by Pierre Aubert , 28 Nov 2002
|
|
|
Fix nested syscalls bug in standalone applications
|
|
|
|
|
|
* Patch by David M<EFBFBD>ller, 27 Nov 2002:
|
|
|
fix output of "pciinfo" command for CardBus bridge devices.
|
|
|
|
|
|
* Fix bug in TQM8260 board detection - boards got stuck when board ID
|
|
|
was not readable
|
|
|
|
|
|
* Add LED indication for IDE activity on KUP4K board
|
|
|
|
|
|
* Fix startup problems with VFD display on TRAB
|
|
|
|
|
|
* Patch by Pierre Aubert, 20 Nov 2002
|
|
|
Add driver for Epson SED13806 graphic controller.
|
|
|
Add support for BMP logos in cfb_console driver.
|
|
|
|
|
|
* Added support for both PCMCIA slots (at the same time!) on MPC8xx
|
|
|
|
|
|
* Patch by Rod Boyce, 21 Nov 2002:
|
|
|
fix PCMCIA on MBX8xx board
|
|
|
|
|
|
* Patch by Pierre Aubert , 21 Nov 2002
|
|
|
Add CFG_CPM_POST_WORD_ADDR to make the offset of the
|
|
|
bootmode word in DPRAM configurable
|
|
|
|
|
|
* Patch by Daniel Engstr<EFBFBD>m, 18 Nov 2002:
|
|
|
Fixes for x86 port (mostly strings issues)
|
|
|
|
|
|
* Patch by Ken Chou, 18 Nov 2002:
|
|
|
Fix for natsemi NIC cards (DP83815)
|
|
|
|
|
|
* Patch by Pierre Aubert, 19 Nov 2002:
|
|
|
fix a bug for the MII configuration, and some warnings
|
|
|
|
|
|
* Patch by Thomas Frieden, 13 Nov 2002:
|
|
|
Add code for AmigaOne board
|
|
|
(preliminary merge to U-Boot, still WIP)
|
|
|
|
|
|
* Patch by Jon Diekema, 12 Nov 2002:
|
|
|
- Adding URL for IEEE OUI lookup
|
|
|
- Making the autoboot #defines dependent on CONFIG_AUTOBOOT_KEYED
|
|
|
being defined.
|
|
|
- In the CONFIG_EXTRA_ENV_SETTINGS #define, the root-on-initrd and
|
|
|
root-on-nfs macros are designed to switch how the default boot
|
|
|
method gets defined.
|
|
|
|
|
|
* Patch by Daniel Engstr<EFBFBD>m, 13 Nov 2002:
|
|
|
Add support for i386 architecture and AMD SC520 board
|
|
|
|
|
|
* Patch by Pierre Aubert, 12 Nov 2002:
|
|
|
Add support for DOS filesystem and booting from DOS floppy disk
|
|
|
|
|
|
* Patch by Jim Sandoz, 07 Nov 2002:
|
|
|
Increase number of network RX buffers (PKTBUFSRX in
|
|
|
"include/net.h") for EEPRO100 based boards (especially SP8240)
|
|
|
which showed "Receiver is not ready" errors when U-Boot was
|
|
|
processing the receive buffers slower than the network controller
|
|
|
was filling them.
|
|
|
|
|
|
* Patch by Andreas Oberritter, 09 Nov 2002:
|
|
|
Change behaviour of NetLoop(): return -1 for errors, filesize
|
|
|
otherwise; return code 0 is valid an means no file loaded - in this
|
|
|
case the environment still gets updated!
|
|
|
|
|
|
* Patches by Jon Diekema, 9 Nov 2002:
|
|
|
- improve ADC/DAC clocking on the SACSng board to align
|
|
|
the failing edges of LRCLK and SCLK
|
|
|
- sbc8260 configuration tweaks
|
|
|
- add status LED support for 82xx systems
|
|
|
- wire sspi/sspo commands into command handler; improved error
|
|
|
handlering
|
|
|
- add timestamp support and alternate memory test to the
|
|
|
SACSng configuration
|
|
|
|
|
|
* Patch by Vince Husovsky, 7 Nov 2002:
|
|
|
Add "-n" to linker options to get rid of "Not enough room for
|
|
|
program headers" problem
|
|
|
|
|
|
* Patch by David M<EFBFBD>ller, 05 Nov 2002
|
|
|
Rename CONFIG_PLL_INPUT_FREQ to CONFIG_SYS_CLK_FREQ
|
|
|
so we can use an already existing name
|
|
|
|
|
|
* Patch by Pierre Aubert, 05 Nov 2002
|
|
|
Hardware relatied improvments in FDC boot code
|
|
|
|
|
|
* Patch by Holger Schurig, 5 Nov 2002:
|
|
|
Make the PXA really change it's frequency
|
|
|
|
|
|
* Patch by Pierre Aubert, 05 Nov 2002
|
|
|
Add support for slave serial Spartan 2 FPGAs
|
|
|
|
|
|
* Fix uninitialized memory (MAC address) in 8xx SCC/FEC ethernet
|
|
|
drivers
|
|
|
|
|
|
* Add support for log buffer which can be passed to Linux kernel's
|
|
|
syslog mechanism; used especially for POST results.
|
|
|
|
|
|
* Patch by Klaus Heydeck, 31 Oct 2002:
|
|
|
Add initial support for kup4k board
|
|
|
|
|
|
* Patch by Robert Schwebel, 04 Nov 2002:
|
|
|
- use watchdog to reset PXA250 systems
|
|
|
- added progress callbacks to (some of the) ARM code
|
|
|
- update for Cogent CSB226 board
|
|
|
|
|
|
* Add support for FPS860 board
|
|
|
|
|
|
* Patch by Guillaume Alexandre,, 04 Nov 2002:
|
|
|
Improve PCI access on 32-bits Compact PCI bus
|
|
|
|
|
|
* Fix mdelay() on TRAB - this was still the debugging version with
|
|
|
seconds instead of ms.
|
|
|
|
|
|
* Patch by Robert Schwebel, 1 Nov 2002:
|
|
|
XScale related cleanup (affects all ARM boards)
|
|
|
|
|
|
* Cleanup of names and README.
|
|
|
|
|
|
======================================================================
|
|
|
Notes for U-Boot 0.1.0:
|
|
|
======================================================================
|
|
|
|
|
|
This is the initial version of "Das U-Boot", the Universal Boot Loader.
|
|
|
|
|
|
It is based on version 2.0.0 (the "Halloween Release") of PPCBoot.
|
|
|
For information about the history of the project please see the
|
|
|
PPCBoot project page at http://sourceforge.net/projects/ppcboot
|
|
|
|
|
|
======================================================================
|
|
|
|
