Whitebox
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
626 Commits
3 Branches
0 Tags
148 MiB
 
 
 
 
 
 
Tag: Branch: Tree: 855a496fe9
Branches Tags
${ item.name }
Create tag ${ searchTerm }
Create branch ${ searchTerm }
from '855a496fe9'
${ noResults }
u-boot/common/cmd_pcmcia.c

2622 lines
63 KiB
Raw Blame History

/*
* (C) Copyright 2000-2002
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
********************************************************************
*
* Lots of code copied from:
*
* m8xx_pcmcia.c - Linux PCMCIA socket driver for the mpc8xx series.
* (C) 1999-2000 Magnus Damm <damm@bitsmart.com>
*
* "The ExCA standard specifies that socket controllers should provide
* two IO and five memory windows per socket, which can be independently
* configured and positioned in the host address space and mapped to
* arbitrary segments of card address space. " - David A Hinds. 1999
*
* This controller does _not_ meet the ExCA standard.
*
* m8xx pcmcia controller brief info:
* + 8 windows (attrib, mem, i/o)
* + up to two slots (SLOT_A and SLOT_B)
* + inputpins, outputpins, event and mask registers.
* - no offset register. sigh.
*
* Because of the lacking offset register we must map the whole card.
* We assign each memory window PCMCIA_MEM_WIN_SIZE address space.
* Make sure there is (PCMCIA_MEM_WIN_SIZE * PCMCIA_MEM_WIN_NO
* * PCMCIA_SOCKETS_NO) bytes at PCMCIA_MEM_WIN_BASE.
* The i/o windows are dynamically allocated at PCMCIA_IO_WIN_BASE.
* They are maximum 64KByte each...
*/
/* #define DEBUG 1 */
/*
* PCMCIA support
*/
#include <common.h>
#include <command.h>
#include <config.h>
#include <pcmcia.h>
#if defined(CONFIG_8xx)
#include <mpc8xx.h>
#endif
#if defined(CONFIG_LWMON)
#include <i2c.h>
#endif
#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) || \
((CONFIG_COMMANDS & CFG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD))
int pcmcia_on (void);
#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
static int pcmcia_off (void);
#endif
#ifdef CONFIG_I82365
extern int i82365_init (void);
extern void i82365_exit (void);
#else /* ! CONFIG_I82365 */
#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
static int hardware_disable(int slot);
#endif
static int hardware_enable (int slot);
static int voltage_set(int slot, int vcc, int vpp);
#ifndef CONFIG_I82365
static u_int m8xx_get_graycode(u_int size);
#endif /* CONFIG_I82365 */
#if 0
static u_int m8xx_get_speed(u_int ns, u_int is_io);
#endif
/* -------------------------------------------------------------------- */
/* look up table for pgcrx registers */
static u_int *pcmcia_pgcrx[2] = {
&((immap_t *)CFG_IMMR)->im_pcmcia.pcmc_pgcra,
&((immap_t *)CFG_IMMR)->im_pcmcia.pcmc_pgcrb,
};
#define PCMCIA_PGCRX(slot) (*pcmcia_pgcrx[slot])
#endif /* CONFIG_I82365 */
#ifdef CONFIG_IDE_8xx_PCCARD
static void print_funcid (int func);
static void print_fixed (volatile uchar *p);
static int identify (volatile uchar *p);
static int check_ide_device (int slot);
#endif /* CONFIG_IDE_8xx_PCCARD */
const char *indent = "\t ";
/* -------------------------------------------------------------------- */
#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
int do_pinit (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
int rcode = 0;
if (argc != 2) {
printf ("Usage: pinit {on | off}\n");
return 1;
}
if (strcmp(argv[1],"on") == 0) {
rcode = pcmcia_on ();
} else if (strcmp(argv[1],"off") == 0) {
rcode = pcmcia_off ();
} else {
printf ("Usage: pinit {on | off}\n");
return 1;
}
return rcode;
}
#endif /* CFG_CMD_PCMCIA */
/* -------------------------------------------------------------------- */
#ifdef CONFIG_I82365
int pcmcia_on (void)
{
u_int rc;
debug ("Enable PCMCIA " PCMCIA_SLOT_MSG "\n");
rc = i82365_init();
if (rc == 0)
{
rc = check_ide_device(0);
}
return (rc);
}
#else
#ifdef CONFIG_HMI10
# define HMI10_FRAM_TIMING (PCMCIA_SHT(2) | PCMCIA_SST(2) | PCMCIA_SL(4))
#endif
#if defined(CONFIG_LWMON) || defined(CONFIG_NSCU)
# define CFG_PCMCIA_TIMING (PCMCIA_SHT(9) | PCMCIA_SST(3) | PCMCIA_SL(12))
#else
# define CFG_PCMCIA_TIMING (PCMCIA_SHT(2) | PCMCIA_SST(4) | PCMCIA_SL(9))
#endif
int pcmcia_on (void)
{
int i;
u_long reg, base;
pcmcia_win_t *win;
u_int slotbit;
u_int rc, slot;
debug ("Enable PCMCIA " PCMCIA_SLOT_MSG "\n");
/* intialize the fixed memory windows */
win = (pcmcia_win_t *)(&((immap_t *)CFG_IMMR)->im_pcmcia.pcmc_pbr0);
base = CFG_PCMCIA_MEM_ADDR;
if((reg = m8xx_get_graycode(CFG_PCMCIA_MEM_SIZE)) == -1) {
printf ("Cannot set window size to 0x%08x\n",
CFG_PCMCIA_MEM_SIZE);
return (1);
}
slotbit = PCMCIA_SLOT_x;
for (i=0; i<PCMCIA_MEM_WIN_NO; ++i) {
win->br = base;
#if (PCMCIA_SOCKETS_NO == 2)
if (i == 4) /* Another slot starting from win 4 */
slotbit = (slotbit ? PCMCIA_PSLOT_A : PCMCIA_PSLOT_B);
#endif
switch (i) {
#ifdef CONFIG_IDE_8xx_PCCARD
case 4:
#ifdef CONFIG_HMI10
{ /* map FRAM area */
win->or = ( PCMCIA_BSIZE_256K
| PCMCIA_PPS_8
| PCMCIA_PRS_ATTR
| slotbit
| PCMCIA_PV
| HMI10_FRAM_TIMING );
break;
}
#endif
case 0: { /* map attribute memory */
win->or = ( PCMCIA_BSIZE_64M
| PCMCIA_PPS_8
| PCMCIA_PRS_ATTR
| slotbit
| PCMCIA_PV
| CFG_PCMCIA_TIMING );
break;
}
case 5:
case 1: { /* map I/O window for data reg */
win->or = ( PCMCIA_BSIZE_1K
| PCMCIA_PPS_16
| PCMCIA_PRS_IO
| slotbit
| PCMCIA_PV
| CFG_PCMCIA_TIMING );
break;
}
case 6:
case 2: { /* map I/O window for cmd/ctrl reg block */
win->or = ( PCMCIA_BSIZE_1K
| PCMCIA_PPS_8
| PCMCIA_PRS_IO
| slotbit
| PCMCIA_PV
| CFG_PCMCIA_TIMING );
break;
}
#endif /* CONFIG_IDE_8xx_PCCARD */
#ifdef CONFIG_HMI10
case 3: { /* map I/O window for 4xUART data/ctrl */
win->br += 0x40000;
win->or = ( PCMCIA_BSIZE_256K
| PCMCIA_PPS_8
| PCMCIA_PRS_IO
| slotbit
| PCMCIA_PV
| CFG_PCMCIA_TIMING );
break;
}
#endif /* CONFIG_HMI10 */
default: /* set to not valid */
win->or = 0;
break;
}
debug ("MemWin %d: PBR 0x%08lX POR %08lX\n",
i, win->br, win->or);
base += CFG_PCMCIA_MEM_SIZE;
++win;
}
for (i=0, rc=0, slot=_slot_; i<PCMCIA_SOCKETS_NO; i++, slot = !slot) {
/* turn off voltage */
if ((rc = voltage_set(slot, 0, 0)))
continue;
/* Enable external hardware */
if ((rc = hardware_enable(slot)))
continue;
#ifdef CONFIG_IDE_8xx_PCCARD
if ((rc = check_ide_device(i)))
continue;
#endif
}
return (rc);
}
#endif /* CONFIG_I82365 */
/* -------------------------------------------------------------------- */
#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
#ifdef CONFIG_I82365
static int pcmcia_off (void)
{
printf ("Disable PCMCIA " PCMCIA_SLOT_MSG "\n");
i82365_exit();
return 0;
}
#else
static int pcmcia_off (void)
{
int i;
pcmcia_win_t *win;
printf ("Disable PCMCIA " PCMCIA_SLOT_MSG "\n");
/* clear interrupt state, and disable interrupts */
((immap_t *)CFG_IMMR)->im_pcmcia.pcmc_pscr = PCMCIA_MASK(_slot_);
((immap_t *)CFG_IMMR)->im_pcmcia.pcmc_per &= ~PCMCIA_MASK(_slot_);
/* turn off interrupt and disable CxOE */
PCMCIA_PGCRX(_slot_) = __MY_PCMCIA_GCRX_CXOE;
/* turn off memory windows */
win = (pcmcia_win_t *)(&((immap_t *)CFG_IMMR)->im_pcmcia.pcmc_pbr0);
for (i=0; i<PCMCIA_MEM_WIN_NO; ++i) {
/* disable memory window */
win->or = 0;
++win;
}
/* turn off voltage */
voltage_set(_slot_, 0, 0);
/* disable external hardware */
printf ("Shutdown and Poweroff " PCMCIA_SLOT_MSG "\n");
hardware_disable(_slot_);
return 0;
}
#endif /* CONFIG_I82365 */
#endif /* CFG_CMD_PCMCIA */
/* -------------------------------------------------------------------- */
#ifdef CONFIG_IDE_8xx_PCCARD
#define MAX_TUPEL_SZ 512
#define MAX_FEATURES 4
int ide_devices_found;
static int check_ide_device (int slot)
{
volatile uchar *ident = NULL;
volatile uchar *feature_p[MAX_FEATURES];
volatile uchar *p, *start, *addr;
int n_features = 0;
uchar func_id = ~0;
uchar code, len;
ushort config_base = 0;
int found = 0;
int i;
addr = (volatile uchar *)(CFG_PCMCIA_MEM_ADDR +
CFG_PCMCIA_MEM_SIZE * (slot * 4));
debug ("PCMCIA MEM: %08lX\n", (ulong)addr);
start = p = (volatile uchar *) addr;
while ((p - start) < MAX_TUPEL_SZ) {
code = *p; p += 2;
if (code == 0xFF) { /* End of chain */
break;
}
len = *p; p += 2;
#if defined(DEBUG) && (DEBUG > 1)
{ volatile uchar *q = p;
printf ("\nTuple code %02x length %d\n\tData:",
code, len);
for (i = 0; i < len; ++i) {
printf (" %02x", *q);
q+= 2;
}
}
#endif /* DEBUG */
switch (code) {
case CISTPL_VERS_1:
ident = p + 4;
break;
case CISTPL_FUNCID:
/* Fix for broken SanDisk which may have 0x80 bit set */
func_id = *p & 0x7F;
break;
case CISTPL_FUNCE:
if (n_features < MAX_FEATURES)
feature_p[n_features++] = p;
break;
case CISTPL_CONFIG:
config_base = (*(p+6) << 8) + (*(p+4));
debug ("\n## Config_base = %04x ###\n", config_base);
default:
break;
}
p += 2 * len;
}
found = identify (ident);
if (func_id != ((uchar)~0)) {
print_funcid (func_id);
if (func_id == CISTPL_FUNCID_FIXED)
found = 1;
else
return (1); /* no disk drive */
}
for (i=0; i<n_features; ++i) {
print_fixed (feature_p[i]);
}
if (!found) {
printf ("unknown card type\n");
return (1);
}
ide_devices_found |= (1 << slot);
/* set I/O area in config reg -> only valid for ARGOSY D5!!! */
*((uchar *)(addr + config_base)) = 1;
return (0);
}
#endif /* CONFIG_IDE_8xx_PCCARD */
/* -------------------------------------------------------------------- */
/* -------------------------------------------------------------------- */
/* board specific stuff: */
/* voltage_set(), hardware_enable() and hardware_disable() */
/* -------------------------------------------------------------------- */
/* -------------------------------------------------------------------- */
/* RPX Boards from Embedded Planet */
/* -------------------------------------------------------------------- */
#if defined(CONFIG_RPXCLASSIC) || defined(CONFIG_RPXLITE)
/* The RPX boards seems to have it's bus monitor timeout set to 6*8 clocks.
* SYPCR is write once only, therefore must the slowest memory be faster
* than the bus monitor or we will get a machine check due to the bus timeout.
*/
#define PCMCIA_BOARD_MSG "RPX CLASSIC or RPX LITE"
#undef PCMCIA_BMT_LIMIT
#define PCMCIA_BMT_LIMIT (6*8)
static int voltage_set(int slot, int vcc, int vpp)
{
u_long reg = 0;
switch(vcc) {
case 0: break;
case 33: reg |= BCSR1_PCVCTL4; break;
case 50: reg |= BCSR1_PCVCTL5; break;
default: return 1;
}
switch(vpp) {
case 0: break;
case 33:
case 50:
if(vcc == vpp)
reg |= BCSR1_PCVCTL6;
else
return 1;
break;
case 120:
reg |= BCSR1_PCVCTL7;
default: return 1;
}
if(vcc == 120)
return 1;
/* first, turn off all power */
*((uint *)RPX_CSR_ADDR) &= ~(BCSR1_PCVCTL4 | BCSR1_PCVCTL5
| BCSR1_PCVCTL6 | BCSR1_PCVCTL7);
/* enable new powersettings */
*((uint *)RPX_CSR_ADDR) |= reg;
return 0;
}
#define socket_get(_slot_) PCMCIA_SOCKET_KEY_5V
static int hardware_enable (int slot)
{
return 0; /* No hardware to enable */
}
#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
static int hardware_disable(int slot)
{
return 0; /* No hardware to disable */
}
#endif /* CFG_CMD_PCMCIA */
#endif /* CONFIG_RPXCLASSIC */
/* -------------------------------------------------------------------- */
/* (F)ADS Boards from Motorola */
/* -------------------------------------------------------------------- */
#if defined(CONFIG_ADS) || defined(CONFIG_FADS)
#ifdef CONFIG_ADS
#define PCMCIA_BOARD_MSG "ADS"
#define PCMCIA_GLITCHY_CD /* My ADS board needs this */
#else
#define PCMCIA_BOARD_MSG "FADS"
#endif
static int voltage_set(int slot, int vcc, int vpp)
{
u_long reg = 0;
switch(vpp) {
case 0: reg = 0; break;
case 50: reg = 1; break;
case 120: reg = 2; break;
default: return 1;
}
switch(vcc) {
case 0: reg = 0; break;
#ifdef CONFIG_ADS
case 50: reg = BCSR1_PCCVCCON; break;
#endif
#ifdef CONFIG_FADS
case 33: reg = BCSR1_PCCVCC0 | BCSR1_PCCVCC1; break;
case 50: reg = BCSR1_PCCVCC1; break;
#endif
default: return 1;
}
/* first, turn off all power */
#ifdef CONFIG_ADS
*((uint *)BCSR1) |= BCSR1_PCCVCCON;
#endif
#ifdef CONFIG_FADS
*((uint *)BCSR1) &= ~(BCSR1_PCCVCC0 | BCSR1_PCCVCC1);
#endif
*((uint *)BCSR1) &= ~BCSR1_PCCVPP_MASK;
/* enable new powersettings */
#ifdef CONFIG_ADS
*((uint *)BCSR1) &= ~reg;
#endif
#ifdef CONFIG_FADS
*((uint *)BCSR1) |= reg;
#endif
*((uint *)BCSR1) |= reg << 20;
return 0;
}
#define socket_get(_slot_) PCMCIA_SOCKET_KEY_5V
static int hardware_enable(int slot)
{
*((uint *)BCSR1) &= ~BCSR1_PCCEN;
return 0;
}
#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
static int hardware_disable(int slot)
{
*((uint *)BCSR1) &= ~BCSR1_PCCEN;
return 0;
}
#endif /* CFG_CMD_PCMCIA */
#endif /* (F)ADS */
/* -------------------------------------------------------------------- */
/* TQM8xxL Boards by TQ Components */
/* SC8xx Boards by SinoVee Microsystems */
/* -------------------------------------------------------------------- */
#if defined(CONFIG_TQM8xxL) || defined(CONFIG_SVM_SC8xx)
#if defined(CONFIG_TQM8xxL)
#define PCMCIA_BOARD_MSG "TQM8xxL"
#endif
#if defined(CONFIG_SVM_SC8xx)
#define PCMCIA_BOARD_MSG "SC8xx"
#endif
static int hardware_enable(int slot)
{
volatile immap_t *immap;
volatile cpm8xx_t *cp;
volatile pcmconf8xx_t *pcmp;
volatile sysconf8xx_t *sysp;
uint reg, mask;
debug ("hardware_enable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
udelay(10000);
immap = (immap_t *)CFG_IMMR;
sysp = (sysconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_siu_conf));
pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
cp = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
/*
* Configure SIUMCR to enable PCMCIA port B
* (VFLS[0:1] are not used for debugging, we connect FRZ# instead)
*/
sysp->sc_siumcr &= ~SIUMCR_DBGC11; /* set DBGC to 00 */
/* clear interrupt state, and disable interrupts */
pcmp->pcmc_pscr = PCMCIA_MASK(slot);
pcmp->pcmc_per &= ~PCMCIA_MASK(slot);
/*
* Disable interrupts, DMA, and PCMCIA buffers
* (isolate the interface) and assert RESET signal
*/
debug ("Disable PCMCIA buffers and assert RESET\n");
reg = 0;
reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
#ifndef NSCU_OE_INV
reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
#endif
PCMCIA_PGCRX(slot) = reg;
udelay(500);
#ifndef CONFIG_HMI10
#ifndef CONFIG_NSCU
/*
* Configure Port C pins for
* 5 Volts Enable and 3 Volts enable
*/
immap->im_ioport.iop_pcpar &= ~(0x0002 | 0x0004);
immap->im_ioport.iop_pcso &= ~(0x0002 | 0x0004);
/* remove all power */
immap->im_ioport.iop_pcdat &= ~(0x0002 | 0x0004);
#endif
#else /* CONFIG_HMI10 */
/*
* Configure Port B pins for
* 5 Volts Enable and 3 Volts enable
*/
immap->im_cpm.cp_pbpar &= ~(0x00000300);
/* remove all power */
immap->im_cpm.cp_pbdat |= 0x00000300;
#endif /* CONFIG_HMI10 */
/*
* Make sure there is a card in the slot, then configure the interface.
*/
udelay(10000);
debug ("[%d] %s: PIPR(%p)=0x%x\n",
__LINE__,__FUNCTION__,
&(pcmp->pcmc_pipr),pcmp->pcmc_pipr);
#ifndef CONFIG_HMI10
if (pcmp->pcmc_pipr & (0x18000000 >> (slot << 4))) {
#else
if (pcmp->pcmc_pipr & (0x10000000 >> (slot << 4))) {
#endif /* CONFIG_HMI10 */
printf (" No Card found\n");
return (1);
}
/*
* Power On.
*/
mask = PCMCIA_VS1(slot) | PCMCIA_VS2(slot);
reg = pcmp->pcmc_pipr;
debug ("PIPR: 0x%x ==> VS1=o%s, VS2=o%s\n",
reg,
(reg&PCMCIA_VS1(slot))?"n":"ff",
(reg&PCMCIA_VS2(slot))?"n":"ff");
#ifndef CONFIG_NSCU
if ((reg & mask) == mask) {
#ifndef CONFIG_HMI10
immap->im_ioport.iop_pcdat |= 0x0004;
#else
immap->im_cpm.cp_pbdat &= ~(0x0000100);
#endif /* CONFIG_HMI10 */
puts (" 5.0V card found: ");
} else {
#ifndef CONFIG_HMI10
immap->im_ioport.iop_pcdat |= 0x0002;
#else
immap->im_cpm.cp_pbdat &= ~(0x0000200);
#endif /* CONFIG_HMI10 */
puts (" 3.3V card found: ");
}
#ifndef CONFIG_HMI10
immap->im_ioport.iop_pcdir |= (0x0002 | 0x0004);
#else
immap->im_cpm.cp_pbdir |= 0x00000300;
#endif /* CONFIG_HMI10 */
#else
if ((reg & mask) == mask) {
puts (" 5.0V card found: ");
} else {
puts (" 3.3V card found: ");
}
#endif
#if 0
/* VCC switch error flag, PCMCIA slot INPACK_ pin */
cp->cp_pbdir &= ~(0x0020 | 0x0010);
cp->cp_pbpar &= ~(0x0020 | 0x0010);
udelay(500000);
#endif
udelay(1000);
debug ("Enable PCMCIA buffers and stop RESET\n");
reg = PCMCIA_PGCRX(slot);
reg &= ~__MY_PCMCIA_GCRX_CXRESET; /* active high */
#ifndef NSCU_OE_INV
reg &= ~__MY_PCMCIA_GCRX_CXOE; /* active low */
#else
reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
#endif
PCMCIA_PGCRX(slot) = reg;
udelay(250000); /* some cards need >150 ms to come up :-( */
debug ("# hardware_enable done\n");
return (0);
}
#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
static int hardware_disable(int slot)
{
volatile immap_t *immap;
volatile pcmconf8xx_t *pcmp;
u_long reg;
debug ("hardware_disable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
immap = (immap_t *)CFG_IMMR;
pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
#ifndef CONFIG_HMI10
#ifndef CONFIG_NSCU
/* remove all power */
immap->im_ioport.iop_pcdat &= ~(0x0002 | 0x0004);
#endif
#else /* CONFIG_HMI10 */
immap->im_cpm.cp_pbdat |= 0x00000300;
#endif /* CONFIG_HMI10 */
debug ("Disable PCMCIA buffers and assert RESET\n");
reg = 0;
reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
#ifndef NSCU_OE_INV
reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
#endif
PCMCIA_PGCRX(slot) = reg;
udelay(10000);
return (0);
}
#endif /* CFG_CMD_PCMCIA */
#ifdef CONFIG_NSCU
static int voltage_set(int slot, int vcc, int vpp)
{
return 0;
}
#else
static int voltage_set(int slot, int vcc, int vpp)
{
volatile immap_t *immap;
volatile pcmconf8xx_t *pcmp;
u_long reg;
debug ("voltage_set: "
PCMCIA_BOARD_MSG
" Slot %c, Vcc=%d.%d, Vpp=%d.%d\n",
'A'+slot, vcc/10, vcc%10, vpp/10, vcc%10);
immap = (immap_t *)CFG_IMMR;
pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
/*
* Disable PCMCIA buffers (isolate the interface)
* and assert RESET signal
*/
debug ("Disable PCMCIA buffers and assert RESET\n");
reg = PCMCIA_PGCRX(slot);
reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
#ifndef NSCU_OE_INV
reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
#else
reg &= ~__MY_PCMCIA_GCRX_CXOE; /* active low */
#endif
PCMCIA_PGCRX(slot) = reg;
udelay(500);
#ifndef CONFIG_HMI10
/*
* Configure Port C pins for
* 5 Volts Enable and 3 Volts enable,
* Turn off all power
*/
debug ("PCMCIA power OFF\n");
immap->im_ioport.iop_pcpar &= ~(0x0002 | 0x0004);
immap->im_ioport.iop_pcso &= ~(0x0002 | 0x0004);
immap->im_ioport.iop_pcdat &= ~(0x0002 | 0x0004);
reg = 0;
switch(vcc) {
case 0: break;
case 33: reg |= 0x0002; break;
case 50: reg |= 0x0004; break;
default: goto done;
}
#else /* CONFIG_HMI10 */
/*
* Configure Port B pins for
* 5 Volts Enable and 3 Volts enable,
* Turn off all power
*/
debug ("PCMCIA power OFF\n");
immap->im_cpm.cp_pbpar &= ~(0x00000300);
/* remove all power */
immap->im_cpm.cp_pbdat |= 0x00000300;
reg = 0;
switch(vcc) {
case 0: break;
case 33: reg |= 0x00000200; break;
case 50: reg |= 0x00000100; break;
default: goto done;
}
#endif /* CONFIG_HMI10 */
/* Checking supported voltages */
debug ("PIPR: 0x%x --> %s\n",
pcmp->pcmc_pipr,
(pcmp->pcmc_pipr & 0x00008000) ? "only 5 V" : "can do 3.3V");
#ifndef CONFIG_HMI10
immap->im_ioport.iop_pcdat |= reg;
immap->im_ioport.iop_pcdir |= (0x0002 | 0x0004);
#else
immap->im_cpm.cp_pbdat &= !reg;
immap->im_cpm.cp_pbdir |= 0x00000300;
#endif /* CONFIG_HMI10 */
if (reg) {
#ifndef CONFIG_HMI10
debug ("PCMCIA powered at %sV\n",
(reg&0x0004) ? "5.0" : "3.3");
#else
debug ("PCMCIA powered at %sV\n",
(reg&0x00000200) ? "5.0" : "3.3");
#endif /* CONFIG_HMI10 */
} else {
debug ("PCMCIA powered down\n");
}
done:
debug ("Enable PCMCIA buffers and stop RESET\n");
reg = PCMCIA_PGCRX(slot);
reg &= ~__MY_PCMCIA_GCRX_CXRESET; /* active high */
#ifndef NSCU_OE_INV
reg &= ~__MY_PCMCIA_GCRX_CXOE; /* active low */
#else
reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
#endif
PCMCIA_PGCRX(slot) = reg;
udelay(500);
debug ("voltage_set: " PCMCIA_BOARD_MSG " Slot %c, DONE\n",
slot+'A');
return (0);
}
#endif
#endif /* TQM8xxL */
/* -------------------------------------------------------------------- */
/* LWMON Board */
/* -------------------------------------------------------------------- */
#if defined(CONFIG_LWMON)
#define PCMCIA_BOARD_MSG "LWMON"
/* #define's for MAX1604 Power Switch */
#define MAX1604_OP_SUS 0x80
#define MAX1604_VCCBON 0x40
#define MAX1604_VCC_35 0x20
#define MAX1604_VCCBHIZ 0x10
#define MAX1604_VPPBON 0x08
#define MAX1604_VPPBPBPGM 0x04
#define MAX1604_VPPBHIZ 0x02
/* reserved 0x01 */
static int hardware_enable(int slot)
{
volatile immap_t *immap;
volatile cpm8xx_t *cp;
volatile pcmconf8xx_t *pcmp;
volatile sysconf8xx_t *sysp;
uint reg, mask;
uchar val;
debug ("hardware_enable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
/* Switch on PCMCIA port in PIC register 0x60 */
reg = pic_read (0x60);
debug ("[%d] PIC read: reg_60 = 0x%02x\n", __LINE__, reg);
reg &= ~0x10;
/* reg |= 0x08; Vpp not needed */
pic_write (0x60, reg);
#ifdef DEBUG
reg = pic_read (0x60);
printf ("[%d] PIC read: reg_60 = 0x%02x\n", __LINE__, reg);
#endif
udelay(10000);
immap = (immap_t *)CFG_IMMR;
sysp = (sysconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_siu_conf));
pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
cp = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
/*
* Configure SIUMCR to enable PCMCIA port B
* (VFLS[0:1] are not used for debugging, we connect FRZ# instead)
*/
sysp->sc_siumcr &= ~SIUMCR_DBGC11; /* set DBGC to 00 */
/* clear interrupt state, and disable interrupts */
pcmp->pcmc_pscr = PCMCIA_MASK(_slot_);
pcmp->pcmc_per &= ~PCMCIA_MASK(_slot_);
/*
* Disable interrupts, DMA, and PCMCIA buffers
* (isolate the interface) and assert RESET signal
*/
debug ("Disable PCMCIA buffers and assert RESET\n");
reg = 0;
reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
PCMCIA_PGCRX(_slot_) = reg;
udelay(500);
/*
* Make sure there is a card in the slot, then configure the interface.
*/
udelay(10000);
debug ("[%d] %s: PIPR(%p)=0x%x\n",
__LINE__,__FUNCTION__,
&(pcmp->pcmc_pipr),pcmp->pcmc_pipr);
if (pcmp->pcmc_pipr & (0x18000000 >> (slot << 4))) {
printf (" No Card found\n");
return (1);
}
/*
* Power On.
*/
mask = PCMCIA_VS1(slot) | PCMCIA_VS2(slot);
reg = pcmp->pcmc_pipr;
debug ("PIPR: 0x%x ==> VS1=o%s, VS2=o%s\n",
reg,
(reg&PCMCIA_VS1(slot))?"n":"ff",
(reg&PCMCIA_VS2(slot))?"n":"ff");
if ((reg & mask) == mask) {
val = 0; /* VCCB3/5 = 0 ==> use Vx = 5.0 V */
puts (" 5.0V card found: ");
} else {
val = MAX1604_VCC_35; /* VCCB3/5 = 1 ==> use Vy = 3.3 V */
puts (" 3.3V card found: ");
}
/* switch VCC on */
val |= MAX1604_OP_SUS | MAX1604_VCCBON;
i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
i2c_write (CFG_I2C_POWER_A_ADDR, 0, 0, &val, 1);
udelay(500000);
debug ("Enable PCMCIA buffers and stop RESET\n");
reg = PCMCIA_PGCRX(_slot_);
reg &= ~__MY_PCMCIA_GCRX_CXRESET; /* active high */
reg &= ~__MY_PCMCIA_GCRX_CXOE; /* active low */
PCMCIA_PGCRX(_slot_) = reg;
udelay(250000); /* some cards need >150 ms to come up :-( */
debug ("# hardware_enable done\n");
return (0);
}
#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
static int hardware_disable(int slot)
{
volatile immap_t *immap;
volatile pcmconf8xx_t *pcmp;
u_long reg;
uchar val;
debug ("hardware_disable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
immap = (immap_t *)CFG_IMMR;
pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
/* remove all power, put output in high impedance state */
val = MAX1604_VCCBHIZ | MAX1604_VPPBHIZ;
i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
i2c_write (CFG_I2C_POWER_A_ADDR, 0, 0, &val, 1);
/* Configure PCMCIA General Control Register */
debug ("Disable PCMCIA buffers and assert RESET\n");
reg = 0;
reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
PCMCIA_PGCRX(_slot_) = reg;
/* Switch off PCMCIA port in PIC register 0x60 */
reg = pic_read (0x60);
debug ("[%d] PIC read: reg_60 = 0x%02x\n", __LINE__, reg);
reg |= 0x10;
reg &= ~0x08;
pic_write (0x60, reg);
#ifdef DEBUG
reg = pic_read (0x60);
printf ("[%d] PIC read: reg_60 = 0x%02x\n", __LINE__, reg);
#endif
udelay(10000);
return (0);
}
#endif /* CFG_CMD_PCMCIA */
static int voltage_set(int slot, int vcc, int vpp)
{
volatile immap_t *immap;
volatile pcmconf8xx_t *pcmp;
u_long reg;
uchar val;
debug ("voltage_set: "
PCMCIA_BOARD_MSG
" Slot %c, Vcc=%d.%d, Vpp=%d.%d\n",
'A'+slot, vcc/10, vcc%10, vpp/10, vcc%10);
immap = (immap_t *)CFG_IMMR;
pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
/*
* Disable PCMCIA buffers (isolate the interface)
* and assert RESET signal
*/
debug ("Disable PCMCIA buffers and assert RESET\n");
reg = PCMCIA_PGCRX(_slot_);
reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
PCMCIA_PGCRX(_slot_) = reg;
udelay(500);
/*
* Turn off all power (switch to high impedance)
*/
debug ("PCMCIA power OFF\n");
val = MAX1604_VCCBHIZ | MAX1604_VPPBHIZ;
i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
i2c_write (CFG_I2C_POWER_A_ADDR, 0, 0, &val, 1);
val = 0;
switch(vcc) {
case 0: break;
case 33: val = MAX1604_VCC_35; break;
case 50: break;
default: goto done;
}
/* Checking supported voltages */
debug ("PIPR: 0x%x --> %s\n",
pcmp->pcmc_pipr,
(pcmp->pcmc_pipr & 0x00008000) ? "only 5 V" : "can do 3.3V");
i2c_write (CFG_I2C_POWER_A_ADDR, 0, 0, &val, 1);
if (val) {
debug ("PCMCIA powered at %sV\n",
(val & MAX1604_VCC_35) ? "3.3" : "5.0");
} else {
debug ("PCMCIA powered down\n");
}
done:
debug ("Enable PCMCIA buffers and stop RESET\n");
reg = PCMCIA_PGCRX(_slot_);
reg &= ~__MY_PCMCIA_GCRX_CXRESET; /* active high */
reg &= ~__MY_PCMCIA_GCRX_CXOE; /* active low */
PCMCIA_PGCRX(_slot_) = reg;
udelay(500);
debug ("voltage_set: " PCMCIA_BOARD_MSG " Slot %c, DONE\n",
slot+'A');
return (0);
}
#endif /* LWMON */
/* -------------------------------------------------------------------- */
/* GTH board by Corelatus AB */
/* -------------------------------------------------------------------- */
#if defined(CONFIG_GTH)
#define PCMCIA_BOARD_MSG "GTH COMPACT FLASH"
static int voltage_set (int slot, int vcc, int vpp)
{ /* Do nothing */
return 0;
}
static int hardware_enable (int slot)
{
volatile immap_t *immap;
volatile cpm8xx_t *cp;
volatile pcmconf8xx_t *pcmp;
volatile sysconf8xx_t *sysp;
uint reg, mask;
debug ("hardware_enable: GTH Slot %c\n", 'A' + slot);
immap = (immap_t *) CFG_IMMR;
sysp = (sysconf8xx_t *) (&(((immap_t *) CFG_IMMR)->im_siu_conf));
pcmp = (pcmconf8xx_t *) (&(((immap_t *) CFG_IMMR)->im_pcmcia));
cp = (cpm8xx_t *) (&(((immap_t *) CFG_IMMR)->im_cpm));
/* clear interrupt state, and disable interrupts */
pcmp->pcmc_pscr = PCMCIA_MASK (_slot_);
pcmp->pcmc_per &= ~PCMCIA_MASK (_slot_);
/*
* Disable interrupts, DMA, and PCMCIA buffers
* (isolate the interface) and assert RESET signal
*/
debug ("Disable PCMCIA buffers and assert RESET\n");
reg = 0;
reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
PCMCIA_PGCRX (_slot_) = reg;
udelay (500);
/*
* Make sure there is a card in the slot,
* then configure the interface.
*/
udelay (10000);
debug ("[%d] %s: PIPR(%p)=0x%x\n",
__LINE__, __FUNCTION__,
&(pcmp->pcmc_pipr), pcmp->pcmc_pipr);
if (pcmp->pcmc_pipr & 0x98000000) {
printf (" No Card found\n");
return (1);
}
mask = PCMCIA_VS1 (slot) | PCMCIA_VS2 (slot);
reg = pcmp->pcmc_pipr;
debug ("PIPR: 0x%x ==> VS1=o%s, VS2=o%s\n",
reg,
(reg & PCMCIA_VS1 (slot)) ? "n" : "ff",
(reg & PCMCIA_VS2 (slot)) ? "n" : "ff");
debug ("Enable PCMCIA buffers and stop RESET\n");
reg = PCMCIA_PGCRX (_slot_);
reg &= ~__MY_PCMCIA_GCRX_CXRESET; /* active high */
reg &= ~__MY_PCMCIA_GCRX_CXOE; /* active low */
PCMCIA_PGCRX (_slot_) = reg;
udelay (250000); /* some cards need >150 ms to come up :-( */
debug ("# hardware_enable done\n");
return 0;
}
#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
static int hardware_disable(int slot)
{
return 0; /* No hardware to disable */
}
#endif /* CFG_CMD_PCMCIA */
#endif /* CONFIG_GTH */
/* -------------------------------------------------------------------- */
/* ICU862 Boards by Cambridge Broadband Ltd. */
/* -------------------------------------------------------------------- */
#if defined(CONFIG_ICU862)
#define PCMCIA_BOARD_MSG "ICU862"
static void cfg_port_B (void);
static int hardware_enable(int slot)
{
volatile immap_t *immap;
volatile cpm8xx_t *cp;
volatile pcmconf8xx_t *pcmp;
volatile sysconf8xx_t *sysp;
uint reg, pipr, mask;
int i;
debug ("hardware_enable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
udelay(10000);
immap = (immap_t *)CFG_IMMR;
sysp = (sysconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_siu_conf));
pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
cp = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
/* Configure Port B for TPS2205 PC-Card Power-Interface Switch */
cfg_port_B ();
/*
* Configure SIUMCR to enable PCMCIA port B
* (VFLS[0:1] are not used for debugging, we connect FRZ# instead)
*/
sysp->sc_siumcr &= ~SIUMCR_DBGC11; /* set DBGC to 00 */
/* clear interrupt state, and disable interrupts */
pcmp->pcmc_pscr = PCMCIA_MASK(_slot_);
pcmp->pcmc_per &= ~PCMCIA_MASK(_slot_);
/*
* Disable interrupts, DMA, and PCMCIA buffers
* (isolate the interface) and assert RESET signal
*/
debug ("Disable PCMCIA buffers and assert RESET\n");
reg = 0;
reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
PCMCIA_PGCRX(_slot_) = reg;
udelay(500);
/*
* Make sure there is a card in the slot, then configure the interface.
*/
udelay(10000);
debug ("[%d] %s: PIPR(%p)=0x%x\n",
__LINE__,__FUNCTION__,
&(pcmp->pcmc_pipr),pcmp->pcmc_pipr);
if (pcmp->pcmc_pipr & (0x18000000 >> (slot << 4))) {
printf (" No Card found\n");
return (1);
}
/*
* Power On: Set VAVCC to 3.3V or 5V, set VAVPP to Hi-Z
*/
mask = PCMCIA_VS1(slot) | PCMCIA_VS2(slot);
pipr = pcmp->pcmc_pipr;
debug ("PIPR: 0x%x ==> VS1=o%s, VS2=o%s\n",
pipr,
(reg&PCMCIA_VS1(slot))?"n":"ff",
(reg&PCMCIA_VS2(slot))?"n":"ff");
reg = cp->cp_pbdat;
if ((pipr & mask) == mask) {
reg |= (TPS2205_VPP_PGM | TPS2205_VPP_VCC | /* VAVPP => Hi-Z */
TPS2205_VCC3); /* 3V off */
reg &= ~(TPS2205_VCC5); /* 5V on */
puts (" 5.0V card found: ");
} else {
reg |= (TPS2205_VPP_PGM | TPS2205_VPP_VCC | /* VAVPP => Hi-Z */
TPS2205_VCC5); /* 5V off */
reg &= ~(TPS2205_VCC3); /* 3V on */
puts (" 3.3V card found: ");
}
debug ("\nPB DAT: %08x -> 3.3V %s 5.0V %s VPP_PGM %s VPP_VCC %s\n",
reg,
(reg & TPS2205_VCC3) ? "off" : "on",
(reg & TPS2205_VCC5) ? "off" : "on",
(reg & TPS2205_VPP_PGM) ? "off" : "on",
(reg & TPS2205_VPP_VCC) ? "off" : "on" );
cp->cp_pbdat = reg;
/* Wait 500 ms; use this to check for over-current */
for (i=0; i<5000; ++i) {
if ((cp->cp_pbdat & TPS2205_OC) == 0) {
printf (" *** Overcurrent - Safety shutdown ***\n");
cp->cp_pbdat &= ~(TPS2205_SHDN);
return (1);
}
udelay (100);
}
debug ("Enable PCMCIA buffers and stop RESET\n");
reg = PCMCIA_PGCRX(_slot_);
reg &= ~__MY_PCMCIA_GCRX_CXRESET; /* active high */
reg &= ~__MY_PCMCIA_GCRX_CXOE; /* active low */
PCMCIA_PGCRX(_slot_) = reg;
udelay(250000); /* some cards need >150 ms to come up :-( */
debug ("# hardware_enable done\n");
return (0);
}
#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
static int hardware_disable(int slot)
{
volatile immap_t *immap;
volatile cpm8xx_t *cp;
volatile pcmconf8xx_t *pcmp;
u_long reg;
debug ("hardware_disable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
immap = (immap_t *)CFG_IMMR;
cp = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
/* Shut down */
cp->cp_pbdat &= ~(TPS2205_SHDN);
/* Configure PCMCIA General Control Register */
debug ("Disable PCMCIA buffers and assert RESET\n");
reg = 0;
reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
PCMCIA_PGCRX(_slot_) = reg;
udelay(10000);
return (0);
}
#endif /* CFG_CMD_PCMCIA */
static int voltage_set(int slot, int vcc, int vpp)
{
volatile immap_t *immap;
volatile cpm8xx_t *cp;
volatile pcmconf8xx_t *pcmp;
u_long reg;
debug ("voltage_set: "
PCMCIA_BOARD_MSG
" Slot %c, Vcc=%d.%d, Vpp=%d.%d\n",
'A'+slot, vcc/10, vcc%10, vpp/10, vcc%10);
immap = (immap_t *)CFG_IMMR;
cp = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
/*
* Disable PCMCIA buffers (isolate the interface)
* and assert RESET signal
*/
debug ("Disable PCMCIA buffers and assert RESET\n");
reg = PCMCIA_PGCRX(_slot_);
reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
PCMCIA_PGCRX(_slot_) = reg;
udelay(500);
/*
* Configure Port C pins for
* 5 Volts Enable and 3 Volts enable,
* Turn all power pins to Hi-Z
*/
debug ("PCMCIA power OFF\n");
cfg_port_B (); /* Enables switch, but all in Hi-Z */
reg = cp->cp_pbdat;
switch(vcc) {
case 0: break; /* Switch off */
case 33: reg &= ~TPS2205_VCC3; break; /* Switch on 3.3V */
case 50: reg &= ~TPS2205_VCC5; break; /* Switch on 5.0V */
default: goto done;
}
/* Checking supported voltages */
debug ("PIPR: 0x%x --> %s\n",
pcmp->pcmc_pipr,
(pcmp->pcmc_pipr & 0x00008000) ? "only 5 V" : "can do 3.3V");
cp->cp_pbdat = reg;
#ifdef DEBUG
{
char *s;
if ((reg & TPS2205_VCC3) == 0) {
s = "at 3.3V";
} else if ((reg & TPS2205_VCC5) == 0) {
s = "at 5.0V";
} else {
s = "down";
}
printf ("PCMCIA powered %s\n", s);
}
#endif
done:
debug ("Enable PCMCIA buffers and stop RESET\n");
reg = PCMCIA_PGCRX(_slot_);
reg &= ~__MY_PCMCIA_GCRX_CXRESET; /* active high */
reg &= ~__MY_PCMCIA_GCRX_CXOE; /* active low */
PCMCIA_PGCRX(_slot_) = reg;
udelay(500);
debug ("voltage_set: " PCMCIA_BOARD_MSG " Slot %c, DONE\n",
slot+'A');
return (0);
}
static void cfg_port_B (void)
{
volatile immap_t *immap;
volatile cpm8xx_t *cp;
uint reg;
immap = (immap_t *)CFG_IMMR;
cp = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
/*
* Configure Port B for TPS2205 PC-Card Power-Interface Switch
*
* Switch off all voltages, assert shutdown
*/
reg = cp->cp_pbdat;
reg |= (TPS2205_VPP_PGM | TPS2205_VPP_VCC | /* VAVPP => Hi-Z */
TPS2205_VCC3 | TPS2205_VCC5 | /* VAVCC => Hi-Z */
TPS2205_SHDN); /* enable switch */
cp->cp_pbdat = reg;
cp->cp_pbpar &= ~(TPS2205_INPUTS | TPS2205_OUTPUTS);
reg = cp->cp_pbdir & ~(TPS2205_INPUTS);
cp->cp_pbdir = reg | TPS2205_OUTPUTS;
debug ("Set Port B: PAR: %08x DIR: %08x DAT: %08x\n",
cp->cp_pbpar, cp->cp_pbdir, cp->cp_pbdat);
}
#endif /* ICU862 */
/* -------------------------------------------------------------------- */
/* C2MON Boards by TTTech Computertechnik AG */
/* -------------------------------------------------------------------- */
#if defined(CONFIG_C2MON)
#define PCMCIA_BOARD_MSG "C2MON"
static void cfg_ports (void);
static int hardware_enable(int slot)
{
volatile immap_t *immap;
volatile cpm8xx_t *cp;
volatile pcmconf8xx_t *pcmp;
volatile sysconf8xx_t *sysp;
uint reg, pipr, mask;
ushort sreg;
int i;
debug ("hardware_enable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
udelay(10000);
immap = (immap_t *)CFG_IMMR;
sysp = (sysconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_siu_conf));
pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
cp = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
/* Configure Ports for TPS2211A PC-Card Power-Interface Switch */
cfg_ports ();
/*
* Configure SIUMCR to enable PCMCIA port B
* (VFLS[0:1] are not used for debugging, we connect FRZ# instead)
*/
sysp->sc_siumcr &= ~SIUMCR_DBGC11; /* set DBGC to 00 */
/* clear interrupt state, and disable interrupts */
pcmp->pcmc_pscr = PCMCIA_MASK(_slot_);
pcmp->pcmc_per &= ~PCMCIA_MASK(_slot_);
/*
* Disable interrupts, DMA, and PCMCIA buffers
* (isolate the interface) and assert RESET signal
*/
debug ("Disable PCMCIA buffers and assert RESET\n");
reg = 0;
reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
PCMCIA_PGCRX(_slot_) = reg;
udelay(500);
/*
* Make sure there is a card in the slot, then configure the interface.
*/
udelay(10000);
debug ("[%d] %s: PIPR(%p)=0x%x\n",
__LINE__,__FUNCTION__,
&(pcmp->pcmc_pipr),pcmp->pcmc_pipr);
if (pcmp->pcmc_pipr & (0x18000000 >> (slot << 4))) {
printf (" No Card found\n");
return (1);
}
/*
* Power On: Set VAVCC to 3.3V or 5V, set VAVPP to Hi-Z
*/
mask = PCMCIA_VS1(slot) | PCMCIA_VS2(slot);
pipr = pcmp->pcmc_pipr;
debug ("PIPR: 0x%x ==> VS1=o%s, VS2=o%s\n",
pipr,
(reg&PCMCIA_VS1(slot))?"n":"ff",
(reg&PCMCIA_VS2(slot))?"n":"ff");
sreg = immap->im_ioport.iop_pcdat;
if ((pipr & mask) == mask) {
sreg |= (TPS2211_VPPD0 | TPS2211_VPPD1 | /* VAVPP => Hi-Z */
TPS2211_VCCD1); /* 5V on */
sreg &= ~(TPS2211_VCCD0); /* 3V off */
puts (" 5.0V card found: ");
} else {
sreg |= (TPS2211_VPPD0 | TPS2211_VPPD1 | /* VAVPP => Hi-Z */
TPS2211_VCCD0); /* 3V on */
sreg &= ~(TPS2211_VCCD1); /* 5V off */
puts (" 3.3V card found: ");
}
debug ("\nPC DAT: %04x -> 3.3V %s 5.0V %s\n",
sreg,
( (sreg & TPS2211_VCCD0) && !(sreg & TPS2211_VCCD1)) ? "on" : "off",
(!(sreg & TPS2211_VCCD0) && (sreg & TPS2211_VCCD1)) ? "on" : "off"
);
immap->im_ioport.iop_pcdat = sreg;
/* Wait 500 ms; use this to check for over-current */
for (i=0; i<5000; ++i) {
if ((cp->cp_pbdat & TPS2211_OC) == 0) {
printf (" *** Overcurrent - Safety shutdown ***\n");
immap->im_ioport.iop_pcdat &= ~(TPS2211_VCCD0|TPS2211_VCCD1);
return (1);
}
udelay (100);
}
debug ("Enable PCMCIA buffers and stop RESET\n");
reg = PCMCIA_PGCRX(_slot_);
reg &= ~__MY_PCMCIA_GCRX_CXRESET; /* active high */
reg &= ~__MY_PCMCIA_GCRX_CXOE; /* active low */
PCMCIA_PGCRX(_slot_) = reg;
udelay(250000); /* some cards need >150 ms to come up :-( */
debug ("# hardware_enable done\n");
return (0);
}
#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
static int hardware_disable(int slot)
{
volatile immap_t *immap;
volatile cpm8xx_t *cp;
volatile pcmconf8xx_t *pcmp;
u_long reg;
debug ("hardware_disable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
immap = (immap_t *)CFG_IMMR;
pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
/* Configure PCMCIA General Control Register */
debug ("Disable PCMCIA buffers and assert RESET\n");
reg = 0;
reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
PCMCIA_PGCRX(_slot_) = reg;
/* ALl voltages off / Hi-Z */
immap->im_ioport.iop_pcdat |= (TPS2211_VPPD0 | TPS2211_VPPD1 |
TPS2211_VCCD0 | TPS2211_VCCD1 );
udelay(10000);
return (0);
}
#endif /* CFG_CMD_PCMCIA */
static int voltage_set(int slot, int vcc, int vpp)
{
volatile immap_t *immap;
volatile cpm8xx_t *cp;
volatile pcmconf8xx_t *pcmp;
u_long reg;
ushort sreg;
debug ("voltage_set: "
PCMCIA_BOARD_MSG
" Slot %c, Vcc=%d.%d, Vpp=%d.%d\n",
'A'+slot, vcc/10, vcc%10, vpp/10, vcc%10);
immap = (immap_t *)CFG_IMMR;
cp = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
/*
* Disable PCMCIA buffers (isolate the interface)
* and assert RESET signal
*/
debug ("Disable PCMCIA buffers and assert RESET\n");
reg = PCMCIA_PGCRX(_slot_);
reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
PCMCIA_PGCRX(_slot_) = reg;
udelay(500);
/*
* Configure Port C pins for
* 5 Volts Enable and 3 Volts enable,
* Turn all power pins to Hi-Z
*/
debug ("PCMCIA power OFF\n");
cfg_ports (); /* Enables switch, but all in Hi-Z */
sreg = immap->im_ioport.iop_pcdat;
sreg |= TPS2211_VPPD0 | TPS2211_VPPD1; /* VAVPP always Hi-Z */
switch(vcc) {
case 0: break; /* Switch off */
case 33: sreg |= TPS2211_VCCD0; /* Switch on 3.3V */
sreg &= ~TPS2211_VCCD1;
break;
case 50: sreg &= ~TPS2211_VCCD0; /* Switch on 5.0V */
sreg |= TPS2211_VCCD1;
break;
default: goto done;
}
/* Checking supported voltages */
debug ("PIPR: 0x%x --> %s\n",
pcmp->pcmc_pipr,
(pcmp->pcmc_pipr & 0x00008000) ? "only 5 V" : "can do 3.3V");
immap->im_ioport.iop_pcdat = sreg;
#ifdef DEBUG
{
char *s;
if ((sreg & TPS2211_VCCD0) && !(sreg & TPS2211_VCCD1)) {
s = "at 3.3V";
} else if (!(sreg & TPS2211_VCCD0) && (sreg & TPS2211_VCCD1)) {
s = "at 5.0V";
} else {
s = "down";
}
printf ("PCMCIA powered %s\n", s);
}
#endif
done:
debug ("Enable PCMCIA buffers and stop RESET\n");
reg = PCMCIA_PGCRX(_slot_);
reg &= ~__MY_PCMCIA_GCRX_CXRESET; /* active high */
reg &= ~__MY_PCMCIA_GCRX_CXOE; /* active low */
PCMCIA_PGCRX(_slot_) = reg;
udelay(500);
debug ("voltage_set: " PCMCIA_BOARD_MSG " Slot %c, DONE\n",
slot+'A');
return (0);
}
static void cfg_ports (void)
{
volatile immap_t *immap;
volatile cpm8xx_t *cp;
ushort sreg;
immap = (immap_t *)CFG_IMMR;
cp = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
/*
* Configure Port C for TPS2211 PC-Card Power-Interface Switch
*
* Switch off all voltages, assert shutdown
*/
sreg = immap->im_ioport.iop_pcdat;
sreg |= (TPS2211_VPPD0 | TPS2211_VPPD1); /* VAVPP => Hi-Z */
sreg &= ~(TPS2211_VCCD0 | TPS2211_VCCD1); /* 3V and 5V off */
immap->im_ioport.iop_pcdat = sreg;
immap->im_ioport.iop_pcpar &= ~(TPS2211_OUTPUTS);
immap->im_ioport.iop_pcdir |= TPS2211_OUTPUTS;
debug ("Set Port C: PAR: %04x DIR: %04x DAT: %04x\n",
immap->im_ioport.iop_pcpar,
immap->im_ioport.iop_pcdir,
immap->im_ioport.iop_pcdat);
/*
* Configure Port B for TPS2211 PC-Card Power-Interface Switch
*
* Over-Current Input only
*/
cp->cp_pbpar &= ~(TPS2211_INPUTS);
cp->cp_pbdir &= ~(TPS2211_INPUTS);
debug ("Set Port B: PAR: %08x DIR: %08x DAT: %08x\n",
cp->cp_pbpar, cp->cp_pbdir, cp->cp_pbdat);
}
#endif /* C2MON */
/* -------------------------------------------------------------------- */
/* MBX board from Morotola */
/* -------------------------------------------------------------------- */
#if defined( CONFIG_MBX )
#include <../board/mbx8xx/csr.h>
/* A lot of this has been taken from the RPX code in this file it works from me.
I have added the voltage selection for the MBX board. */
/* MBX voltage bit in control register #2 */
#define CR2_VPP12 ((uchar)0x10)
#define CR2_VPPVDD ((uchar)0x20)
#define CR2_VDD5 ((uchar)0x40)
#define CR2_VDD3 ((uchar)0x80)
#define PCMCIA_BOARD_MSG "MBX860"
static int voltage_set (int slot, int vcc, int vpp)
{
uchar reg = 0;
debug ("voltage_set: PCMCIA_BOARD_MSG Slot %c, Vcc=%d.%d, Vpp=%d.%d\n",
'A' + slot, vcc / 10, vcc % 10, vpp / 10, vcc % 10);
switch (vcc) {
case 0:
break;
case 33:
reg |= CR2_VDD3;
break;
case 50:
reg |= CR2_VDD5;
break;
default:
return 1;
}
switch (vpp) {
case 0:
break;
case 33:
case 50:
if (vcc == vpp) {
reg |= CR2_VPPVDD;
} else {
return 1;
}
break;
case 120:
reg |= CR2_VPP12;
break;
default:
return 1;
}
/* first, turn off all power */
MBX_CSR2 &= ~(CR2_VDDSEL | CR2_VPPSEL);
/* enable new powersettings */
MBX_CSR2 |= reg;
debug ("MBX_CSR2 read = 0x%02x\n", MBX_CSR2);
return (0);
}
static int hardware_enable (int slot)
{
volatile immap_t *immap;
volatile cpm8xx_t *cp;
volatile pcmconf8xx_t *pcmp;
volatile sysconf8xx_t *sysp;
uint reg, mask;
debug ("hardware_enable: " PCMCIA_BOARD_MSG " Slot %c\n",
'A' + slot);
udelay (10000);
immap = (immap_t *) CFG_IMMR;
sysp = (sysconf8xx_t *) (&(((immap_t *) CFG_IMMR)->im_siu_conf));
pcmp = (pcmconf8xx_t *) (&(((immap_t *) CFG_IMMR)->im_pcmcia));
cp = (cpm8xx_t *) (&(((immap_t *) CFG_IMMR)->im_cpm));
/* clear interrupt state, and disable interrupts */
pcmp->pcmc_pscr = PCMCIA_MASK (_slot_);
pcmp->pcmc_per &= ~PCMCIA_MASK (_slot_);
/*
* Disable interrupts, DMA, and PCMCIA buffers
* (isolate the interface) and assert RESET signal
*/
debug ("Disable PCMCIA buffers and assert RESET\n");
reg = 0;
reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
PCMCIA_PGCRX (_slot_) = reg;
udelay (500);
/* remove all power */
voltage_set (slot, 0, 0);
/*
* Make sure there is a card in the slot, then configure the interface.
*/
udelay(10000);
debug ("[%d] %s: PIPR(%p)=0x%x\n",
__LINE__,__FUNCTION__,
&(pcmp->pcmc_pipr),pcmp->pcmc_pipr);
#ifndef CONFIG_HMI10
if (pcmp->pcmc_pipr & (0x18000000 >> (slot << 4))) {
#else
if (pcmp->pcmc_pipr & (0x10000000 >> (slot << 4))) {
#endif /* CONFIG_HMI10 */
printf (" No Card found\n");
return (1);
}
/*
* Power On.
*/
mask = PCMCIA_VS1 (_slot_) | PCMCIA_VS2 (_slot_);
reg = pcmp->pcmc_pipr;
debug ("PIPR: 0x%x ==> VS1=o%s, VS2=o%s\n", reg,
(reg & PCMCIA_VS1 (slot)) ? "n" : "ff",
(reg & PCMCIA_VS2 (slot)) ? "n" : "ff");
if ((reg & mask) == mask) {
voltage_set (_slot_, 50, 0);
printf (" 5.0V card found: ");
} else {
voltage_set (_slot_, 33, 0);
printf (" 3.3V card found: ");
}
debug ("Enable PCMCIA buffers and stop RESET\n");
reg = PCMCIA_PGCRX (_slot_);
reg &= ~__MY_PCMCIA_GCRX_CXRESET; /* active high */
reg &= ~__MY_PCMCIA_GCRX_CXOE; /* active low */
PCMCIA_PGCRX (_slot_) = reg;
udelay (250000); /* some cards need >150 ms to come up :-( */
debug ("# hardware_enable done\n");
return (0);
}
#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
static int hardware_disable (int slot)
{
return 0; /* No hardware to disable */
}
#endif /* CFG_CMD_PCMCIA */
#endif /* CONFIG_MBX */
/* -------------------------------------------------------------------- */
/* R360MPI Board */
/* -------------------------------------------------------------------- */
#if defined(CONFIG_R360MPI)
#define PCMCIA_BOARD_MSG "R360MPI"
static int hardware_enable(int slot)
{
volatile immap_t *immap;
volatile cpm8xx_t *cp;
volatile pcmconf8xx_t *pcmp;
volatile sysconf8xx_t *sysp;
uint reg, mask;
debug ("hardware_enable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
udelay(10000);
immap = (immap_t *)CFG_IMMR;
sysp = (sysconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_siu_conf));
pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
cp = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
/*
* Configure SIUMCR to enable PCMCIA port B
* (VFLS[0:1] are not used for debugging, we connect FRZ# instead)
*/
sysp->sc_siumcr &= ~SIUMCR_DBGC11; /* set DBGC to 00 */
/* clear interrupt state, and disable interrupts */
pcmp->pcmc_pscr = PCMCIA_MASK(_slot_);
pcmp->pcmc_per &= ~PCMCIA_MASK(_slot_);
/*
* Disable interrupts, DMA, and PCMCIA buffers
* (isolate the interface) and assert RESET signal
*/
debug ("Disable PCMCIA buffers and assert RESET\n");
reg = 0;
reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
PCMCIA_PGCRX(_slot_) = reg;
udelay(500);
/*
* Configure Ports A, B & C pins for
* 5 Volts Enable and 3 Volts enable
*/
immap->im_ioport.iop_pcpar &= ~(0x0400);
immap->im_ioport.iop_pcso &= ~(0x0400);/*
immap->im_ioport.iop_pcdir |= 0x0400;*/
immap->im_ioport.iop_papar &= ~(0x0200);/*
immap->im_ioport.iop_padir |= 0x0200;*/
#if 0
immap->im_ioport.iop_pbpar &= ~(0xC000);
immap->im_ioport.iop_pbdir &= ~(0xC000);
#endif
/* remove all power */
immap->im_ioport.iop_pcdat |= 0x0400;
immap->im_ioport.iop_padat |= 0x0200;
/*
* Make sure there is a card in the slot, then configure the interface.
*/
udelay(10000);
debug ("[%d] %s: PIPR(%p)=0x%x\n",
__LINE__,__FUNCTION__,
&(pcmp->pcmc_pipr),pcmp->pcmc_pipr);
if (pcmp->pcmc_pipr & (0x18000000 >> (slot << 4))) {
printf (" No Card found\n");
return (1);
}
/*
* Power On.
*/
mask = PCMCIA_VS1(slot) | PCMCIA_VS2(slot);
reg = pcmp->pcmc_pipr;
debug ("PIPR: 0x%x ==> VS1=o%s, VS2=o%s\n",
reg,
(reg&PCMCIA_VS1(slot))?"n":"ff",
(reg&PCMCIA_VS2(slot))?"n":"ff");
if ((reg & mask) == mask) {
immap->im_ioport.iop_pcdat &= ~(0x4000);
puts (" 5.0V card found: ");
} else {
immap->im_ioport.iop_padat &= ~(0x0002);
puts (" 3.3V card found: ");
}
immap->im_ioport.iop_pcdir |= 0x0400;
immap->im_ioport.iop_padir |= 0x0200;
#if 0
/* VCC switch error flag, PCMCIA slot INPACK_ pin */
cp->cp_pbdir &= ~(0x0020 | 0x0010);
cp->cp_pbpar &= ~(0x0020 | 0x0010);
udelay(500000);
#endif
debug ("Enable PCMCIA buffers and stop RESET\n");
reg = PCMCIA_PGCRX(_slot_);
reg &= ~__MY_PCMCIA_GCRX_CXRESET; /* active high */
reg &= ~__MY_PCMCIA_GCRX_CXOE; /* active low */
PCMCIA_PGCRX(_slot_) = reg;
udelay(250000); /* some cards need >150 ms to come up :-( */
debug ("# hardware_enable done\n");
return (0);
}
#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
static int hardware_disable(int slot)
{
volatile immap_t *immap;
volatile pcmconf8xx_t *pcmp;
u_long reg;
debug ("hardware_disable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
immap = (immap_t *)CFG_IMMR;
pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
/* remove all power */
immap->im_ioport.iop_pcdat |= 0x0400;
immap->im_ioport.iop_padat |= 0x0200;
/* Configure PCMCIA General Control Register */
debug ("Disable PCMCIA buffers and assert RESET\n");
reg = 0;
reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
PCMCIA_PGCRX(_slot_) = reg;
udelay(10000);
return (0);
}
#endif /* CFG_CMD_PCMCIA */
static int voltage_set(int slot, int vcc, int vpp)
{
volatile immap_t *immap;
volatile pcmconf8xx_t *pcmp;
u_long reg;
debug ("voltage_set: "
PCMCIA_BOARD_MSG
" Slot %c, Vcc=%d.%d, Vpp=%d.%d\n",
'A'+slot, vcc/10, vcc%10, vpp/10, vcc%10);
immap = (immap_t *)CFG_IMMR;
pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
/*
* Disable PCMCIA buffers (isolate the interface)
* and assert RESET signal
*/
debug ("Disable PCMCIA buffers and assert RESET\n");
reg = PCMCIA_PGCRX(_slot_);
reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
PCMCIA_PGCRX(_slot_) = reg;
udelay(500);
/*
* Configure Ports A & C pins for
* 5 Volts Enable and 3 Volts enable,
* Turn off all power
*/
debug ("PCMCIA power OFF\n");
immap->im_ioport.iop_pcpar &= ~(0x0400);
immap->im_ioport.iop_pcso &= ~(0x0400);/*
immap->im_ioport.iop_pcdir |= 0x0400;*/
immap->im_ioport.iop_papar &= ~(0x0200);/*
immap->im_ioport.iop_padir |= 0x0200;*/
immap->im_ioport.iop_pcdat |= 0x0400;
immap->im_ioport.iop_padat |= 0x0200;
reg = 0;
switch(vcc) {
case 0: break;
case 33: reg |= 0x0200; break;
case 50: reg |= 0x0400; break;
default: goto done;
}
/* Checking supported voltages */
debug ("PIPR: 0x%x --> %s\n",
pcmp->pcmc_pipr,
(pcmp->pcmc_pipr & 0x00008000) ? "only 5 V" : "can do 3.3V");
if (reg & 0x0200)
immap->im_ioport.iop_pcdat &= !reg;
if (reg & 0x0400)
immap->im_ioport.iop_padat &= !reg;
immap->im_ioport.iop_pcdir |= 0x0200;
immap->im_ioport.iop_padir |= 0x0400;
if (reg) {
debug ("PCMCIA powered at %sV\n",
(reg&0x0400) ? "5.0" : "3.3");
} else {
debug ("PCMCIA powered down\n");
}
done:
debug ("Enable PCMCIA buffers and stop RESET\n");
reg = PCMCIA_PGCRX(_slot_);
reg &= ~__MY_PCMCIA_GCRX_CXRESET; /* active high */
reg &= ~__MY_PCMCIA_GCRX_CXOE; /* active low */
PCMCIA_PGCRX(_slot_) = reg;
udelay(500);
debug ("voltage_set: " PCMCIA_BOARD_MSG " Slot %c, DONE\n",
slot+'A');
return (0);
}
#endif /* R360MPI */
/* -------------------------------------------------------------------- */
/* KUP4K Board */
/* -------------------------------------------------------------------- */
#if defined(CONFIG_KUP4K)
#define PCMCIA_BOARD_MSG "KUP4K"
#define KUP4K_PCMCIA_B_3V3 (0x00020000)
static int hardware_enable(int slot)
{
volatile immap_t *immap;
volatile cpm8xx_t *cp;
volatile pcmconf8xx_t *pcmp;
volatile sysconf8xx_t *sysp;
uint reg, mask;
debug ("hardware_enable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
udelay(10000);
immap = (immap_t *)CFG_IMMR;
sysp = (sysconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_siu_conf));
pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
cp = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
/*
* Configure SIUMCR to enable PCMCIA port B
* (VFLS[0:1] are not used for debugging, we connect FRZ# instead)
*/
sysp->sc_siumcr &= ~SIUMCR_DBGC11; /* set DBGC to 00 */
/* clear interrupt state, and disable interrupts */
pcmp->pcmc_pscr = PCMCIA_MASK(slot);
pcmp->pcmc_per &= ~PCMCIA_MASK(slot);
/*
* Disable interrupts, DMA, and PCMCIA buffers
* (isolate the interface) and assert RESET signal
*/
debug ("Disable PCMCIA buffers and assert RESET\n");
reg = 0;
reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
PCMCIA_PGCRX(slot) = reg;
udelay(2500);
/*
* Configure Port B pins for
* 3 Volts enable
*/
if (slot) { /* Slot A is built-in */
cp->cp_pbdir |= KUP4K_PCMCIA_B_3V3;
cp->cp_pbpar &= ~KUP4K_PCMCIA_B_3V3;
/* remove all power */
cp->cp_pbdat |= KUP4K_PCMCIA_B_3V3; /* active low */
}
/*
* Make sure there is a card in the slot, then configure the interface.
*/
udelay(10000);
debug ("[%d] %s: PIPR(%p)=0x%x\n",
__LINE__,__FUNCTION__,
&(pcmp->pcmc_pipr),pcmp->pcmc_pipr);
if (pcmp->pcmc_pipr & (0x18000000 >> (slot << 4))) {
printf (" No Card found\n");
return (1);
}
/*
* Power On.
*/
printf("%s Slot %c:", slot ? "" : "\n", 'A' + slot);
mask = PCMCIA_VS1(slot) | PCMCIA_VS2(slot);
reg = pcmp->pcmc_pipr;
debug ("PIPR: 0x%x ==> VS1=o%s, VS2=o%s\n",
reg,
(reg&PCMCIA_VS1(slot))?"n":"ff",
(reg&PCMCIA_VS2(slot))?"n":"ff");
if ((reg & mask) == mask) {
puts (" 5.0V card found: NOT SUPPORTED !!!\n");
} else {
if(slot)
cp->cp_pbdat &= ~KUP4K_PCMCIA_B_3V3;
puts (" 3.3V card found: ");
}
#if 0
/* VCC switch error flag, PCMCIA slot INPACK_ pin */
cp->cp_pbdir &= ~(0x0020 | 0x0010);
cp->cp_pbpar &= ~(0x0020 | 0x0010);
udelay(500000);
#endif
debug ("Enable PCMCIA buffers and stop RESET\n");
reg = PCMCIA_PGCRX(slot);
reg &= ~__MY_PCMCIA_GCRX_CXRESET; /* active high */
reg &= ~__MY_PCMCIA_GCRX_CXOE; /* active low */
PCMCIA_PGCRX(slot) = reg;
udelay(250000); /* some cards need >150 ms to come up :-( */
debug ("# hardware_enable done\n");
return (0);
}
#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
static int hardware_disable(int slot)
{
volatile immap_t *immap;
volatile cpm8xx_t *cp;
volatile pcmconf8xx_t *pcmp;
u_long reg;
debug ("hardware_disable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
immap = (immap_t *)CFG_IMMR;
pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
cp = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
/* remove all power */
if (slot)
cp->cp_pbdat |= KUP4K_PCMCIA_B_3V3;
/* Configure PCMCIA General Control Register */
debug ("Disable PCMCIA buffers and assert RESET\n");
reg = 0;
reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
PCMCIA_PGCRX(slot) = reg;
udelay(10000);
return (0);
}
#endif /* CFG_CMD_PCMCIA */
static int voltage_set(int slot, int vcc, int vpp)
{
volatile immap_t *immap;
volatile cpm8xx_t *cp;
volatile pcmconf8xx_t *pcmp;
u_long reg;
debug ("voltage_set: " \
PCMCIA_BOARD_MSG \
" Slot %c, Vcc=%d.%d, Vpp=%d.%d\n",
'A'+slot, vcc/10, vcc%10, vpp/10, vcc%10);
if (!slot) /* Slot A is not configurable */
return 0;
immap = (immap_t *)CFG_IMMR;
pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
cp = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
/*
* Disable PCMCIA buffers (isolate the interface)
* and assert RESET signal
*/
debug ("Disable PCMCIA buffers and assert RESET\n");
reg = PCMCIA_PGCRX(slot);
reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
reg |= __MY_PCMCIA_GCRX_CXOE; /* active low */
PCMCIA_PGCRX(slot) = reg;
udelay(500);
debug ("PCMCIA power OFF\n");
/*
* Configure Port B pins for
* 3 Volts enable
*/
cp->cp_pbdir |= KUP4K_PCMCIA_B_3V3;
cp->cp_pbpar &= ~KUP4K_PCMCIA_B_3V3;
/* remove all power */
cp->cp_pbdat |= KUP4K_PCMCIA_B_3V3; /* active low */
switch(vcc) {
case 0: break;
case 33:
cp->cp_pbdat &= ~KUP4K_PCMCIA_B_3V3;
debug ("PCMCIA powered at 3.3V\n");
break;
case 50:
debug ("PCMCIA: 5Volt vcc not supported\n");
break;
default:
puts("PCMCIA: vcc not supported");
break;
}
udelay(10000);
/* Checking supported voltages */
debug ("PIPR: 0x%x --> %s\n",
pcmp->pcmc_pipr,
(pcmp->pcmc_pipr & (0x80000000 >> (slot << 4)))
? "only 5 V --> NOT SUPPORTED"
: "can do 3.3V");
debug ("Enable PCMCIA buffers and stop RESET\n");
reg = PCMCIA_PGCRX(slot);
reg &= ~__MY_PCMCIA_GCRX_CXRESET; /* active high */
reg &= ~__MY_PCMCIA_GCRX_CXOE; /* active low */
PCMCIA_PGCRX(slot) = reg;
udelay(500);
debug ("voltage_set: " PCMCIA_BOARD_MSG " Slot %c, DONE\n",
slot+'A');
return (0);
}
#endif /* KUP4K */
/* -------------------------------------------------------------------- */
/* End of Board Specific Stuff */
/* -------------------------------------------------------------------- */
/* -------------------------------------------------------------------- */
/* MPC8xx Specific Stuff - should go to MPC8xx directory */
/* -------------------------------------------------------------------- */
/*
* Search this table to see if the windowsize is
* supported...
*/
#define M8XX_SIZES_NO 32
static const u_int m8xx_size_to_gray[M8XX_SIZES_NO] =
{ 0x00000001, 0x00000002, 0x00000008, 0x00000004,
0x00000080, 0x00000040, 0x00000010, 0x00000020,
0x00008000, 0x00004000, 0x00001000, 0x00002000,
0x00000100, 0x00000200, 0x00000800, 0x00000400,
0x0fffffff, 0xffffffff, 0xffffffff, 0xffffffff,
0x01000000, 0x02000000, 0xffffffff, 0x04000000,
0x00010000, 0x00020000, 0x00080000, 0x00040000,
0x00800000, 0x00400000, 0x00100000, 0x00200000 };
/* -------------------------------------------------------------------- */
#ifndef CONFIG_I82365
static u_int m8xx_get_graycode(u_int size)
{
u_int k;
for (k = 0; k < M8XX_SIZES_NO; k++) {
if(m8xx_size_to_gray[k] == size)
break;
}
if((k == M8XX_SIZES_NO) || (m8xx_size_to_gray[k] == -1))
k = -1;
return k;
}
#endif /* CONFIG_I82365 */
/* -------------------------------------------------------------------- */
#if 0
static u_int m8xx_get_speed(u_int ns, u_int is_io)
{
u_int reg, clocks, psst, psl, psht;
if(!ns) {
/*
* We get called with IO maps setup to 0ns
* if not specified by the user.
* They should be 255ns.
*/
if(is_io)
ns = 255;
else
ns = 100; /* fast memory if 0 */
}
/*
* In PSST, PSL, PSHT fields we tell the controller
* timing parameters in CLKOUT clock cycles.
* CLKOUT is the same as GCLK2_50.
*/
/* how we want to adjust the timing - in percent */
#define ADJ 180 /* 80 % longer accesstime - to be sure */
clocks = ((M8XX_BUSFREQ / 1000) * ns) / 1000;
clocks = (clocks * ADJ) / (100*1000);
if(clocks >= PCMCIA_BMT_LIMIT) {
DEBUG(0, "Max access time limit reached\n");
clocks = PCMCIA_BMT_LIMIT-1;
}
psst = clocks / 7; /* setup time */
psht = clocks / 7; /* hold time */
psl = (clocks * 5) / 7; /* strobe length */
psst += clocks - (psst + psht + psl);
reg = psst << 12;
reg |= psl << 7;
reg |= psht << 16;
return reg;
}
#endif
/* -------------------------------------------------------------------- */
#ifdef CONFIG_IDE_8xx_PCCARD
static void print_funcid (int func)
{
puts (indent);
switch (func) {
case CISTPL_FUNCID_MULTI:
puts (" Multi-Function");
break;
case CISTPL_FUNCID_MEMORY:
puts (" Memory");
break;
case CISTPL_FUNCID_SERIAL:
puts (" Serial Port");
break;
case CISTPL_FUNCID_PARALLEL:
puts (" Parallel Port");
break;
case CISTPL_FUNCID_FIXED:
puts (" Fixed Disk");
break;
case CISTPL_FUNCID_VIDEO:
puts (" Video Adapter");
break;
case CISTPL_FUNCID_NETWORK:
puts (" Network Adapter");
break;
case CISTPL_FUNCID_AIMS:
puts (" AIMS Card");
break;
case CISTPL_FUNCID_SCSI:
puts (" SCSI Adapter");
break;
default:
puts (" Unknown");
break;
}
puts (" Card\n");
}
#endif /* CONFIG_IDE_8xx_PCCARD */
/* -------------------------------------------------------------------- */
#ifdef CONFIG_IDE_8xx_PCCARD
static void print_fixed (volatile uchar *p)
{
if (p == NULL)
return;
puts(indent);
switch (*p) {
case CISTPL_FUNCE_IDE_IFACE:
{ uchar iface = *(p+2);
puts ((iface == CISTPL_IDE_INTERFACE) ? " IDE" : " unknown");
puts (" interface ");
break;
}
case CISTPL_FUNCE_IDE_MASTER:
case CISTPL_FUNCE_IDE_SLAVE:
{ uchar f1 = *(p+2);
uchar f2 = *(p+4);
puts ((f1 & CISTPL_IDE_SILICON) ? " [silicon]" : " [rotating]");
if (f1 & CISTPL_IDE_UNIQUE)
puts (" [unique]");
puts ((f1 & CISTPL_IDE_DUAL) ? " [dual]" : " [single]");
if (f2 & CISTPL_IDE_HAS_SLEEP)
puts (" [sleep]");
if (f2 & CISTPL_IDE_HAS_STANDBY)
puts (" [standby]");
if (f2 & CISTPL_IDE_HAS_IDLE)
puts (" [idle]");
if (f2 & CISTPL_IDE_LOW_POWER)
puts (" [low power]");
if (f2 & CISTPL_IDE_REG_INHIBIT)
puts (" [reg inhibit]");
if (f2 & CISTPL_IDE_HAS_INDEX)
puts (" [index]");
if (f2 & CISTPL_IDE_IOIS16)
puts (" [IOis16]");
break;
}
}
putc ('\n');
}
#endif /* CONFIG_IDE_8xx_PCCARD */
/* -------------------------------------------------------------------- */
#ifdef CONFIG_IDE_8xx_PCCARD
#define MAX_IDENT_CHARS 64
#define MAX_IDENT_FIELDS 4
static uchar *known_cards[] = {
"ARGOSY PnPIDE D5",
NULL
};
static int identify (volatile uchar *p)
{
uchar id_str[MAX_IDENT_CHARS];
uchar data;
uchar *t;
uchar **card;
int i, done;
if (p == NULL)
return (0); /* Don't know */
t = id_str;
done =0;
for (i=0; i<=4 && !done; ++i, p+=2) {
while ((data = *p) != '\0') {
if (data == 0xFF) {
done = 1;
break;
}
*t++ = data;
if (t == &id_str[MAX_IDENT_CHARS-1]) {
done = 1;
break;
}
p += 2;
}
if (!done)
*t++ = ' ';
}
*t = '\0';
while (--t > id_str) {
if (*t == ' ')
*t = '\0';
else
break;
}
puts (id_str);
putc ('\n');
for (card=known_cards; *card; ++card) {
debug ("## Compare against \"%s\"\n", *card);
if (strcmp(*card, id_str) == 0) { /* found! */
debug ("## CARD FOUND ##\n");
return (1);
}
}
return (0); /* don't know */
}
#endif /* CONFIG_IDE_8xx_PCCARD */
/* -------------------------------------------------------------------- */
#endif /* CFG_CMD_PCMCIA || (CFG_CMD_IDE && CONFIG_IDE_8xx_PCCARD) */
/**************************************************/
#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
U_BOOT_CMD(
pinit, 2, 1, do_pinit,
"pinit - PCMCIA sub-system\n",
"on - power on PCMCIA socket\n"
"pinit off - power off PCMCIA socket\n"
);
#endif