upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
119 lines
3.3 KiB
119 lines
3.3 KiB
/*
|
|
* (C) Copyright 2007
|
|
* Stefan Roese, DENX Software Engineering, sr@denx.de.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/processor.h>
|
|
|
|
extern void board_pll_init_f(void);
|
|
|
|
static void acadia_gpio_init(void)
|
|
{
|
|
/*
|
|
* GPIO0 setup (select GPIO or alternate function)
|
|
*/
|
|
out32(GPIO0_OSRL, CONFIG_SYS_GPIO0_OSRL);
|
|
out32(GPIO0_OSRH, CONFIG_SYS_GPIO0_OSRH); /* output select */
|
|
out32(GPIO0_ISR1L, CONFIG_SYS_GPIO0_ISR1L);
|
|
out32(GPIO0_ISR1H, CONFIG_SYS_GPIO0_ISR1H); /* input select */
|
|
out32(GPIO0_TSRL, CONFIG_SYS_GPIO0_TSRL);
|
|
out32(GPIO0_TSRH, CONFIG_SYS_GPIO0_TSRH); /* three-state select */
|
|
out32(GPIO0_TCR, CONFIG_SYS_GPIO0_TCR); /* enable output driver for outputs */
|
|
|
|
/*
|
|
* Ultra (405EZ) was nice enough to add another GPIO controller
|
|
*/
|
|
out32(GPIO1_OSRH, CONFIG_SYS_GPIO1_OSRH); /* output select */
|
|
out32(GPIO1_OSRL, CONFIG_SYS_GPIO1_OSRL);
|
|
out32(GPIO1_ISR1H, CONFIG_SYS_GPIO1_ISR1H); /* input select */
|
|
out32(GPIO1_ISR1L, CONFIG_SYS_GPIO1_ISR1L);
|
|
out32(GPIO1_TSRH, CONFIG_SYS_GPIO1_TSRH); /* three-state select */
|
|
out32(GPIO1_TSRL, CONFIG_SYS_GPIO1_TSRL);
|
|
out32(GPIO1_TCR, CONFIG_SYS_GPIO1_TCR); /* enable output driver for outputs */
|
|
}
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
unsigned int reg;
|
|
|
|
#if !defined(CONFIG_NAND_U_BOOT)
|
|
/* don't reinit PLL when booting via I2C bootstrap option */
|
|
mfsdr(SDR0_PINSTP, reg);
|
|
if (reg != 0xf0000000)
|
|
board_pll_init_f();
|
|
#endif
|
|
|
|
acadia_gpio_init();
|
|
|
|
/* Configure 405EZ for NAND usage */
|
|
mtsdr(SDR0_NAND0, SDR_NAND0_NDEN | SDR_NAND0_NDAREN | SDR_NAND0_NDRBEN);
|
|
mfsdr(SDR0_ULTRA0, reg);
|
|
reg &= ~SDR_ULTRA0_CSN_MASK;
|
|
reg |= (SDR_ULTRA0_CSNSEL0 >> CONFIG_SYS_NAND_CS) |
|
|
SDR_ULTRA0_NDGPIOBP |
|
|
SDR_ULTRA0_EBCRDYEN |
|
|
SDR_ULTRA0_NFSRSTEN;
|
|
mtsdr(SDR0_ULTRA0, reg);
|
|
|
|
/* USB Host core needs this bit set */
|
|
mfsdr(SDR0_ULTRA1, reg);
|
|
mtsdr(SDR0_ULTRA1, reg | SDR_ULTRA1_LEDNENABLE);
|
|
|
|
mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
|
|
mtdcr(UIC0ER, 0x00000000); /* disable all ints */
|
|
mtdcr(UIC0CR, 0x00000010);
|
|
mtdcr(UIC0PR, 0xFE7FFFF0); /* set int polarities */
|
|
mtdcr(UIC0TR, 0x00000010); /* set int trigger levels */
|
|
mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
|
|
|
|
return 0;
|
|
}
|
|
|
|
int misc_init_f(void)
|
|
{
|
|
/* Set EPLD to take PHY out of reset */
|
|
out8(CONFIG_SYS_CPLD_BASE + 0x05, 0x00);
|
|
udelay(100000);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Check Board Identity:
|
|
*/
|
|
int checkboard(void)
|
|
{
|
|
char buf[64];
|
|
int i = getenv_f("serial#", buf, sizeof(buf));
|
|
u8 rev;
|
|
|
|
rev = in8(CONFIG_SYS_CPLD_BASE + 0);
|
|
printf("Board: Acadia - AMCC PPC405EZ Evaluation Board, Rev. %X", rev);
|
|
|
|
if (i > 0) {
|
|
puts(", serial# ");
|
|
puts(buf);
|
|
}
|
|
putc('\n');
|
|
|
|
return (0);
|
|
}
|
|
|