upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
306 lines
6.7 KiB
306 lines
6.7 KiB
/*
|
|
* Driver for Blackfin On-Chip SPI device
|
|
*
|
|
* Copyright (c) 2005-2010 Analog Devices Inc.
|
|
*
|
|
* Licensed under the GPL-2 or later.
|
|
*/
|
|
|
|
/*#define DEBUG*/
|
|
|
|
#include <common.h>
|
|
#include <malloc.h>
|
|
#include <spi.h>
|
|
|
|
#include <asm/blackfin.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/portmux.h>
|
|
#include <asm/mach-common/bits/spi.h>
|
|
|
|
struct bfin_spi_slave {
|
|
struct spi_slave slave;
|
|
void *mmr_base;
|
|
u16 ctl, baud, flg;
|
|
};
|
|
|
|
#define MAKE_SPI_FUNC(mmr, off) \
|
|
static inline void write_##mmr(struct bfin_spi_slave *bss, u16 val) { bfin_write16(bss->mmr_base + off, val); } \
|
|
static inline u16 read_##mmr(struct bfin_spi_slave *bss) { return bfin_read16(bss->mmr_base + off); }
|
|
MAKE_SPI_FUNC(SPI_CTL, 0x00)
|
|
MAKE_SPI_FUNC(SPI_FLG, 0x04)
|
|
MAKE_SPI_FUNC(SPI_STAT, 0x08)
|
|
MAKE_SPI_FUNC(SPI_TDBR, 0x0c)
|
|
MAKE_SPI_FUNC(SPI_RDBR, 0x10)
|
|
MAKE_SPI_FUNC(SPI_BAUD, 0x14)
|
|
|
|
#define to_bfin_spi_slave(s) container_of(s, struct bfin_spi_slave, slave)
|
|
|
|
#define gpio_cs(cs) ((cs) - MAX_CTRL_CS)
|
|
#ifdef CONFIG_BFIN_SPI_GPIO_CS
|
|
# define is_gpio_cs(cs) ((cs) > MAX_CTRL_CS)
|
|
#else
|
|
# define is_gpio_cs(cs) 0
|
|
#endif
|
|
|
|
int spi_cs_is_valid(unsigned int bus, unsigned int cs)
|
|
{
|
|
if (is_gpio_cs(cs))
|
|
return gpio_is_valid(gpio_cs(cs));
|
|
else
|
|
return (cs >= 1 && cs <= MAX_CTRL_CS);
|
|
}
|
|
|
|
void spi_cs_activate(struct spi_slave *slave)
|
|
{
|
|
struct bfin_spi_slave *bss = to_bfin_spi_slave(slave);
|
|
|
|
if (is_gpio_cs(slave->cs)) {
|
|
unsigned int cs = gpio_cs(slave->cs);
|
|
gpio_set_value(cs, bss->flg);
|
|
debug("%s: SPI_CS_GPIO:%x\n", __func__, gpio_get_value(cs));
|
|
} else {
|
|
write_SPI_FLG(bss,
|
|
(read_SPI_FLG(bss) &
|
|
~((!bss->flg << 8) << slave->cs)) |
|
|
(1 << slave->cs));
|
|
debug("%s: SPI_FLG:%x\n", __func__, read_SPI_FLG(bss));
|
|
}
|
|
|
|
SSYNC();
|
|
}
|
|
|
|
void spi_cs_deactivate(struct spi_slave *slave)
|
|
{
|
|
struct bfin_spi_slave *bss = to_bfin_spi_slave(slave);
|
|
|
|
if (is_gpio_cs(slave->cs)) {
|
|
unsigned int cs = gpio_cs(slave->cs);
|
|
gpio_set_value(cs, !bss->flg);
|
|
debug("%s: SPI_CS_GPIO:%x\n", __func__, gpio_get_value(cs));
|
|
} else {
|
|
u16 flg;
|
|
|
|
/* make sure we force the cs to deassert rather than let the
|
|
* pin float back up. otherwise, exact timings may not be
|
|
* met some of the time leading to random behavior (ugh).
|
|
*/
|
|
flg = read_SPI_FLG(bss) | ((!bss->flg << 8) << slave->cs);
|
|
write_SPI_FLG(bss, flg);
|
|
SSYNC();
|
|
debug("%s: SPI_FLG:%x\n", __func__, read_SPI_FLG(bss));
|
|
|
|
flg &= ~(1 << slave->cs);
|
|
write_SPI_FLG(bss, flg);
|
|
debug("%s: SPI_FLG:%x\n", __func__, read_SPI_FLG(bss));
|
|
}
|
|
|
|
SSYNC();
|
|
}
|
|
|
|
void spi_init()
|
|
{
|
|
}
|
|
|
|
#ifdef SPI_CTL
|
|
# define SPI0_CTL SPI_CTL
|
|
#endif
|
|
|
|
#define SPI_PINS(n) \
|
|
[n] = { 0, P_SPI##n##_SCK, P_SPI##n##_MISO, P_SPI##n##_MOSI, 0 }
|
|
static unsigned short pins[][5] = {
|
|
#ifdef SPI0_CTL
|
|
SPI_PINS(0),
|
|
#endif
|
|
#ifdef SPI1_CTL
|
|
SPI_PINS(1),
|
|
#endif
|
|
#ifdef SPI2_CTL
|
|
SPI_PINS(2),
|
|
#endif
|
|
};
|
|
|
|
#define SPI_CS_PINS(n) \
|
|
[n] = { \
|
|
P_SPI##n##_SSEL1, P_SPI##n##_SSEL2, P_SPI##n##_SSEL3, \
|
|
P_SPI##n##_SSEL4, P_SPI##n##_SSEL5, P_SPI##n##_SSEL6, \
|
|
P_SPI##n##_SSEL7, \
|
|
}
|
|
static const unsigned short cs_pins[][7] = {
|
|
#ifdef SPI0_CTL
|
|
SPI_CS_PINS(0),
|
|
#endif
|
|
#ifdef SPI1_CTL
|
|
SPI_CS_PINS(1),
|
|
#endif
|
|
#ifdef SPI2_CTL
|
|
SPI_CS_PINS(2),
|
|
#endif
|
|
};
|
|
|
|
void spi_set_speed(struct spi_slave *slave, uint hz)
|
|
{
|
|
struct bfin_spi_slave *bss = to_bfin_spi_slave(slave);
|
|
ulong sclk;
|
|
u32 baud;
|
|
|
|
sclk = get_sclk();
|
|
/* baud should be rounded up */
|
|
baud = DIV_ROUND_UP(sclk, 2 * hz);
|
|
if (baud < 2)
|
|
baud = 2;
|
|
else if (baud > (u16)-1)
|
|
baud = -1;
|
|
bss->baud = baud;
|
|
}
|
|
|
|
struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
|
|
unsigned int max_hz, unsigned int mode)
|
|
{
|
|
struct bfin_spi_slave *bss;
|
|
u32 mmr_base;
|
|
|
|
if (!spi_cs_is_valid(bus, cs))
|
|
return NULL;
|
|
|
|
if (bus >= ARRAY_SIZE(pins) || pins[bus] == NULL) {
|
|
debug("%s: invalid bus %u\n", __func__, bus);
|
|
return NULL;
|
|
}
|
|
switch (bus) {
|
|
#ifdef SPI0_CTL
|
|
case 0: mmr_base = SPI0_CTL; break;
|
|
#endif
|
|
#ifdef SPI1_CTL
|
|
case 1: mmr_base = SPI1_CTL; break;
|
|
#endif
|
|
#ifdef SPI2_CTL
|
|
case 2: mmr_base = SPI2_CTL; break;
|
|
#endif
|
|
default: return NULL;
|
|
}
|
|
|
|
bss = spi_alloc_slave(struct bfin_spi_slave, bus, cs);
|
|
if (!bss)
|
|
return NULL;
|
|
|
|
bss->mmr_base = (void *)mmr_base;
|
|
bss->ctl = SPE | MSTR | TDBR_CORE;
|
|
if (mode & SPI_CPHA) bss->ctl |= CPHA;
|
|
if (mode & SPI_CPOL) bss->ctl |= CPOL;
|
|
if (mode & SPI_LSB_FIRST) bss->ctl |= LSBF;
|
|
bss->flg = mode & SPI_CS_HIGH ? 1 : 0;
|
|
spi_set_speed(&bss->slave, max_hz);
|
|
|
|
debug("%s: bus:%i cs:%i mmr:%x ctl:%x baud:%i flg:%i\n", __func__,
|
|
bus, cs, mmr_base, bss->ctl, bss->baud, bss->flg);
|
|
|
|
return &bss->slave;
|
|
}
|
|
|
|
void spi_free_slave(struct spi_slave *slave)
|
|
{
|
|
struct bfin_spi_slave *bss = to_bfin_spi_slave(slave);
|
|
free(bss);
|
|
}
|
|
|
|
int spi_claim_bus(struct spi_slave *slave)
|
|
{
|
|
struct bfin_spi_slave *bss = to_bfin_spi_slave(slave);
|
|
|
|
debug("%s: bus:%i cs:%i\n", __func__, slave->bus, slave->cs);
|
|
|
|
if (is_gpio_cs(slave->cs)) {
|
|
unsigned int cs = gpio_cs(slave->cs);
|
|
gpio_request(cs, "bfin-spi");
|
|
gpio_direction_output(cs, !bss->flg);
|
|
pins[slave->bus][0] = P_DONTCARE;
|
|
} else
|
|
pins[slave->bus][0] = cs_pins[slave->bus][slave->cs - 1];
|
|
peripheral_request_list(pins[slave->bus], "bfin-spi");
|
|
|
|
write_SPI_CTL(bss, bss->ctl);
|
|
write_SPI_BAUD(bss, bss->baud);
|
|
SSYNC();
|
|
|
|
return 0;
|
|
}
|
|
|
|
void spi_release_bus(struct spi_slave *slave)
|
|
{
|
|
struct bfin_spi_slave *bss = to_bfin_spi_slave(slave);
|
|
|
|
debug("%s: bus:%i cs:%i\n", __func__, slave->bus, slave->cs);
|
|
|
|
peripheral_free_list(pins[slave->bus]);
|
|
if (is_gpio_cs(slave->cs))
|
|
gpio_free(gpio_cs(slave->cs));
|
|
|
|
write_SPI_CTL(bss, 0);
|
|
SSYNC();
|
|
}
|
|
|
|
#ifndef CONFIG_BFIN_SPI_IDLE_VAL
|
|
# define CONFIG_BFIN_SPI_IDLE_VAL 0xff
|
|
#endif
|
|
|
|
static int spi_pio_xfer(struct bfin_spi_slave *bss, const u8 *tx, u8 *rx,
|
|
uint bytes)
|
|
{
|
|
/* discard invalid data and clear RXS */
|
|
read_SPI_RDBR(bss);
|
|
/* todo: take advantage of hardware fifos */
|
|
while (bytes--) {
|
|
u8 value = (tx ? *tx++ : CONFIG_BFIN_SPI_IDLE_VAL);
|
|
debug("%s: tx:%x ", __func__, value);
|
|
write_SPI_TDBR(bss, value);
|
|
SSYNC();
|
|
while ((read_SPI_STAT(bss) & TXS))
|
|
if (ctrlc())
|
|
return -1;
|
|
while (!(read_SPI_STAT(bss) & SPIF))
|
|
if (ctrlc())
|
|
return -1;
|
|
while (!(read_SPI_STAT(bss) & RXS))
|
|
if (ctrlc())
|
|
return -1;
|
|
value = read_SPI_RDBR(bss);
|
|
if (rx)
|
|
*rx++ = value;
|
|
debug("rx:%x\n", value);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
|
|
void *din, unsigned long flags)
|
|
{
|
|
struct bfin_spi_slave *bss = to_bfin_spi_slave(slave);
|
|
const u8 *tx = dout;
|
|
u8 *rx = din;
|
|
uint bytes = bitlen / 8;
|
|
int ret = 0;
|
|
|
|
debug("%s: bus:%i cs:%i bitlen:%i bytes:%i flags:%lx\n", __func__,
|
|
slave->bus, slave->cs, bitlen, bytes, flags);
|
|
|
|
if (bitlen == 0)
|
|
goto done;
|
|
|
|
/* we can only do 8 bit transfers */
|
|
if (bitlen % 8) {
|
|
flags |= SPI_XFER_END;
|
|
goto done;
|
|
}
|
|
|
|
if (flags & SPI_XFER_BEGIN)
|
|
spi_cs_activate(slave);
|
|
|
|
ret = spi_pio_xfer(bss, tx, rx, bytes);
|
|
|
|
done:
|
|
if (flags & SPI_XFER_END)
|
|
spi_cs_deactivate(slave);
|
|
|
|
return ret;
|
|
}
|
|
|