upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
311 lines
8.8 KiB
311 lines
8.8 KiB
/*
|
|
* (C) Copyright 2009
|
|
* Marvell Semiconductor <www.marvell.com>
|
|
* Written-by: Prafulla Wadaskar <prafulla@marvell.com>
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
|
|
* MA 02110-1301 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <netdev.h>
|
|
#include <asm/cache.h>
|
|
#include <u-boot/md5.h>
|
|
#include <asm/arch/kirkwood.h>
|
|
|
|
#define BUFLEN 16
|
|
|
|
void reset_cpu(unsigned long ignored)
|
|
{
|
|
struct kwcpu_registers *cpureg =
|
|
(struct kwcpu_registers *)KW_CPU_REG_BASE;
|
|
|
|
writel(readl(&cpureg->rstoutn_mask) | (1 << 2),
|
|
&cpureg->rstoutn_mask);
|
|
writel(readl(&cpureg->sys_soft_rst) | 1,
|
|
&cpureg->sys_soft_rst);
|
|
while (1) ;
|
|
}
|
|
|
|
/*
|
|
* Generates Ramdom hex number reading some time varient system registers
|
|
* and using md5 algorithm
|
|
*/
|
|
unsigned char get_random_hex(void)
|
|
{
|
|
int i;
|
|
u32 inbuf[BUFLEN];
|
|
u8 outbuf[BUFLEN];
|
|
|
|
/*
|
|
* in case of 88F6281/88F6192 A0,
|
|
* Bit7 need to reset to generate random values in KW_REG_UNDOC_0x1470
|
|
* Soc reg offsets KW_REG_UNDOC_0x1470 and KW_REG_UNDOC_0x1478 are reserved regs and
|
|
* Does not have names at this moment (no errata available)
|
|
*/
|
|
writel(readl(KW_REG_UNDOC_0x1478) & ~(1 << 7), KW_REG_UNDOC_0x1478);
|
|
for (i = 0; i < BUFLEN; i++) {
|
|
inbuf[i] = readl(KW_REG_UNDOC_0x1470);
|
|
}
|
|
md5((u8 *) inbuf, (BUFLEN * sizeof(u32)), outbuf);
|
|
return outbuf[outbuf[7] % 0x0f];
|
|
}
|
|
|
|
/*
|
|
* Window Size
|
|
* Used with the Base register to set the address window size and location.
|
|
* Must be programmed from LSB to MSB as sequence of ones followed by
|
|
* sequence of zeros. The number of ones specifies the size of the window in
|
|
* 64 KByte granularity (e.g., a value of 0x00FF specifies 256 = 16 MByte).
|
|
* NOTE: A value of 0x0 specifies 64-KByte size.
|
|
*/
|
|
unsigned int kw_winctrl_calcsize(unsigned int sizeval)
|
|
{
|
|
int i;
|
|
unsigned int j = 0;
|
|
u32 val = sizeval >> 1;
|
|
|
|
for (i = 0; val > 0x10000; i++) {
|
|
j |= (1 << i);
|
|
val = val >> 1;
|
|
}
|
|
return (0x0000ffff & j);
|
|
}
|
|
|
|
/*
|
|
* kw_config_adr_windows - Configure address Windows
|
|
*
|
|
* There are 8 address windows supported by Kirkwood Soc to addess different
|
|
* devices. Each window can be configured for size, BAR and remap addr
|
|
* Below configuration is standard for most of the cases
|
|
*
|
|
* If remap function not used, remap_lo must be set as base
|
|
*
|
|
* Reference Documentation:
|
|
* Mbus-L to Mbus Bridge Registers Configuration.
|
|
* (Sec 25.1 and 25.3 of Datasheet)
|
|
*/
|
|
int kw_config_adr_windows(void)
|
|
{
|
|
struct kwwin_registers *winregs =
|
|
(struct kwwin_registers *)KW_CPU_WIN_BASE;
|
|
|
|
/* Window 0: PCIE MEM address space */
|
|
writel(KWCPU_WIN_CTRL_DATA(1024 * 1024 * 256, KWCPU_TARGET_PCIE,
|
|
KWCPU_ATTR_PCIE_MEM, KWCPU_WIN_ENABLE), &winregs[0].ctrl);
|
|
|
|
writel(KW_DEFADR_PCI_MEM, &winregs[0].base);
|
|
writel(KW_DEFADR_PCI_MEM, &winregs[0].remap_lo);
|
|
writel(0x0, &winregs[0].remap_hi);
|
|
|
|
/* Window 1: PCIE IO address space */
|
|
writel(KWCPU_WIN_CTRL_DATA(1024 * 64, KWCPU_TARGET_PCIE,
|
|
KWCPU_ATTR_PCIE_IO, KWCPU_WIN_ENABLE), &winregs[1].ctrl);
|
|
writel(KW_DEFADR_PCI_IO, &winregs[1].base);
|
|
writel(KW_DEFADR_PCI_IO_REMAP, &winregs[1].remap_lo);
|
|
writel(0x0, &winregs[1].remap_hi);
|
|
|
|
/* Window 2: NAND Flash address space */
|
|
writel(KWCPU_WIN_CTRL_DATA(1024 * 1024 * 128, KWCPU_TARGET_MEMORY,
|
|
KWCPU_ATTR_NANDFLASH, KWCPU_WIN_ENABLE), &winregs[2].ctrl);
|
|
writel(KW_DEFADR_NANDF, &winregs[2].base);
|
|
writel(KW_DEFADR_NANDF, &winregs[2].remap_lo);
|
|
writel(0x0, &winregs[2].remap_hi);
|
|
|
|
/* Window 3: SPI Flash address space */
|
|
writel(KWCPU_WIN_CTRL_DATA(1024 * 1024 * 128, KWCPU_TARGET_MEMORY,
|
|
KWCPU_ATTR_SPIFLASH, KWCPU_WIN_ENABLE), &winregs[3].ctrl);
|
|
writel(KW_DEFADR_SPIF, &winregs[3].base);
|
|
writel(KW_DEFADR_SPIF, &winregs[3].remap_lo);
|
|
writel(0x0, &winregs[3].remap_hi);
|
|
|
|
/* Window 4: BOOT Memory address space */
|
|
writel(KWCPU_WIN_CTRL_DATA(1024 * 1024 * 128, KWCPU_TARGET_MEMORY,
|
|
KWCPU_ATTR_BOOTROM, KWCPU_WIN_ENABLE), &winregs[4].ctrl);
|
|
writel(KW_DEFADR_BOOTROM, &winregs[4].base);
|
|
|
|
/* Window 5: Security SRAM address space */
|
|
writel(KWCPU_WIN_CTRL_DATA(1024 * 64, KWCPU_TARGET_SASRAM,
|
|
KWCPU_ATTR_SASRAM, KWCPU_WIN_ENABLE), &winregs[5].ctrl);
|
|
writel(KW_DEFADR_SASRAM, &winregs[5].base);
|
|
|
|
/* Window 6-7: Disabled */
|
|
writel(KWCPU_WIN_DISABLE, &winregs[6].ctrl);
|
|
writel(KWCPU_WIN_DISABLE, &winregs[7].ctrl);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* kw_config_gpio - GPIO configuration
|
|
*/
|
|
void kw_config_gpio(u32 gpp0_oe_val, u32 gpp1_oe_val, u32 gpp0_oe, u32 gpp1_oe)
|
|
{
|
|
struct kwgpio_registers *gpio0reg =
|
|
(struct kwgpio_registers *)KW_GPIO0_BASE;
|
|
struct kwgpio_registers *gpio1reg =
|
|
(struct kwgpio_registers *)KW_GPIO1_BASE;
|
|
|
|
/* Init GPIOS to default values as per board requirement */
|
|
writel(gpp0_oe_val, &gpio0reg->dout);
|
|
writel(gpp1_oe_val, &gpio1reg->dout);
|
|
writel(gpp0_oe, &gpio0reg->oe);
|
|
writel(gpp1_oe, &gpio1reg->oe);
|
|
}
|
|
|
|
/*
|
|
* kw_config_mpp - Multi-Purpose Pins Functionality configuration
|
|
*
|
|
* Each MPP can be configured to different functionality through
|
|
* MPP control register, ref (sec 6.1 of kirkwood h/w specification)
|
|
*
|
|
* There are maximum 64 Multi-Pourpose Pins on Kirkwood
|
|
* Each MPP functionality can be configuration by a 4bit value
|
|
* of MPP control reg, the value and associated functionality depends
|
|
* upon used SoC varient
|
|
*/
|
|
int kw_config_mpp(u32 mpp0_7, u32 mpp8_15, u32 mpp16_23, u32 mpp24_31,
|
|
u32 mpp32_39, u32 mpp40_47, u32 mpp48_55)
|
|
{
|
|
u32 *mppreg = (u32 *) KW_MPP_BASE;
|
|
|
|
/* program mpp registers */
|
|
writel(mpp0_7, &mppreg[0]);
|
|
writel(mpp8_15, &mppreg[1]);
|
|
writel(mpp16_23, &mppreg[2]);
|
|
writel(mpp24_31, &mppreg[3]);
|
|
writel(mpp32_39, &mppreg[4]);
|
|
writel(mpp40_47, &mppreg[5]);
|
|
writel(mpp48_55, &mppreg[6]);
|
|
return 0;
|
|
}
|
|
|
|
#if defined(CONFIG_DISPLAY_CPUINFO)
|
|
int print_cpuinfo(void)
|
|
{
|
|
char *name = "Unknown";
|
|
|
|
switch (readl(KW_REG_DEVICE_ID) & 0x03) {
|
|
case 1:
|
|
name = "88F6192_A0";
|
|
break;
|
|
case 2:
|
|
name = "88F6281_A0";
|
|
break;
|
|
default:
|
|
printf("SoC: Unsupported Kirkwood\n");
|
|
return -1;
|
|
}
|
|
printf("SoC: Kirkwood %s\n", name);
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_DISPLAY_CPUINFO */
|
|
|
|
#ifdef CONFIG_ARCH_CPU_INIT
|
|
int arch_cpu_init(void)
|
|
{
|
|
u32 reg;
|
|
struct kwcpu_registers *cpureg =
|
|
(struct kwcpu_registers *)KW_CPU_REG_BASE;
|
|
|
|
/* Linux expects` the internal registers to be at 0xf1000000 */
|
|
writel(KW_REGS_PHY_BASE, KW_OFFSET_REG);
|
|
|
|
/* Enable and invalidate L2 cache in write through mode */
|
|
writel(readl(&cpureg->l2_cfg) | 0x18, &cpureg->l2_cfg);
|
|
invalidate_l2_cache();
|
|
|
|
kw_config_adr_windows();
|
|
|
|
#ifdef CONFIG_KIRKWOOD_RGMII_PAD_1V8
|
|
/*
|
|
* Configures the I/O voltage of the pads connected to Egigabit
|
|
* Ethernet interface to 1.8V
|
|
* By defult it is set to 3.3V
|
|
*/
|
|
reg = readl(KW_REG_MPP_OUT_DRV_REG);
|
|
reg |= (1 << 7);
|
|
writel(reg, KW_REG_MPP_OUT_DRV_REG);
|
|
#endif
|
|
#ifdef CONFIG_KIRKWOOD_EGIGA_INIT
|
|
/*
|
|
* Set egiga port0/1 in normal functional mode
|
|
* This is required becasue on kirkwood by default ports are in reset mode
|
|
* OS egiga driver may not have provision to set them in normal mode
|
|
* and if u-boot is build without network support, network may fail at OS level
|
|
*/
|
|
reg = readl(KWGBE_PORT_SERIAL_CONTROL1_REG(0));
|
|
reg &= ~(1 << 4); /* Clear PortReset Bit */
|
|
writel(reg, (KWGBE_PORT_SERIAL_CONTROL1_REG(0)));
|
|
reg = readl(KWGBE_PORT_SERIAL_CONTROL1_REG(1));
|
|
reg &= ~(1 << 4); /* Clear PortReset Bit */
|
|
writel(reg, (KWGBE_PORT_SERIAL_CONTROL1_REG(1)));
|
|
#endif
|
|
#ifdef CONFIG_KIRKWOOD_PCIE_INIT
|
|
/*
|
|
* Enable PCI Express Port0
|
|
*/
|
|
reg = readl(&cpureg->ctrl_stat);
|
|
reg |= (1 << 0); /* Set PEX0En Bit */
|
|
writel(reg, &cpureg->ctrl_stat);
|
|
#endif
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_ARCH_CPU_INIT */
|
|
|
|
/*
|
|
* SOC specific misc init
|
|
*/
|
|
#if defined(CONFIG_ARCH_MISC_INIT)
|
|
int arch_misc_init(void)
|
|
{
|
|
volatile u32 temp;
|
|
|
|
/*CPU streaming & write allocate */
|
|
temp = readfr_extra_feature_reg();
|
|
temp &= ~(1 << 28); /* disable wr alloc */
|
|
writefr_extra_feature_reg(temp);
|
|
|
|
temp = readfr_extra_feature_reg();
|
|
temp &= ~(1 << 29); /* streaming disabled */
|
|
writefr_extra_feature_reg(temp);
|
|
|
|
/* L2Cache settings */
|
|
temp = readfr_extra_feature_reg();
|
|
/* Disable L2C pre fetch - Set bit 24 */
|
|
temp |= (1 << 24);
|
|
/* enable L2C - Set bit 22 */
|
|
temp |= (1 << 22);
|
|
writefr_extra_feature_reg(temp);
|
|
|
|
icache_enable();
|
|
/* Change reset vector to address 0x0 */
|
|
temp = get_cr();
|
|
set_cr(temp & ~CR_V);
|
|
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_ARCH_MISC_INIT */
|
|
|
|
#ifdef CONFIG_KIRKWOOD_EGIGA
|
|
int cpu_eth_init(bd_t *bis)
|
|
{
|
|
kirkwood_egiga_initialize(bis);
|
|
return 0;
|
|
}
|
|
#endif
|
|
|